Merge remote-tracking branch 'origin/master' into new_main_page_ui
This commit is contained in:
YuSanka
commit
e0bb6bafd5
153 changed files with 20775 additions and 4724 deletions
Binary file not shown.
|
Before Width: | Height: | Size: 100 KiB After Width: | Height: | Size: 33 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 170 KiB After Width: | Height: | Size: 23 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 83 KiB After Width: | Height: | Size: 30 KiB |
BIN
resources/icons/printers/PrusaResearch_MK3MM2.png
Normal file
BIN
resources/icons/printers/PrusaResearch_MK3MM2.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 41 KiB |
File diff suppressed because it is too large
Load diff
|
|
@ -6,6 +6,7 @@ xs/src/slic3r/GUI/ButtonsDescription.cpp
|
|||
xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp
|
||||
xs/src/slic3r/GUI/ConfigWizard.cpp
|
||||
xs/src/slic3r/GUI/FirmwareDialog.cpp
|
||||
xs/src/slic3r/GUI/GLCanvas3D.cpp
|
||||
xs/src/slic3r/GUI/GUI.cpp
|
||||
xs/src/slic3r/GUI/MsgDialog.cpp
|
||||
xs/src/slic3r/GUI/Tab.cpp
|
||||
|
|
@ -21,6 +22,7 @@ xs/src/slic3r/GUI/UpdateDialogs.cpp
|
|||
xs/src/slic3r/GUI/WipeTowerDialog.cpp
|
||||
xs/src/slic3r/Utils/OctoPrint.cpp
|
||||
xs/src/slic3r/Utils/PresetUpdater.cpp
|
||||
xs/src/libslic3r/Print.cpp
|
||||
xs/src/libslic3r/PrintConfig.cpp
|
||||
xs/src/libslic3r/GCode/PreviewData.cpp
|
||||
lib/Slic3r/GUI.pm
|
||||
|
|
|
|||
|
|
@ -1,4 +1,13 @@
|
|||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.11 fw version changed to 3.3.1
|
||||
0.1.10 MK3 jerk and acceleration update
|
||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
||||
0.1.6 Split the MK2.5 profile from the MK2S
|
||||
min_slic3r_version = 1.40.0-beta
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.1.6
|
||||
config_version = 0.2.0-alpha2
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
||||
|
||||
|
|
@ -27,9 +27,13 @@ name = Original Prusa i3 MK2.5
|
|||
variants = 0.4; 0.25; 0.6
|
||||
|
||||
[printer_model:MK2SMM]
|
||||
name = Original Prusa i3 MK2SMM
|
||||
name = Original Prusa i3 MK2S Multi Material Upgrade
|
||||
variants = 0.4; 0.6
|
||||
|
||||
[printer_model:MK3MM2]
|
||||
name = Original Prusa i3 MK3 Multi Material Upgrade 2.0
|
||||
variants = 0.4
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
|
|
@ -140,7 +144,7 @@ infill_extrusion_width = 0.25
|
|||
perimeter_extrusion_width = 0.25
|
||||
solid_infill_extrusion_width = 0.25
|
||||
top_infill_extrusion_width = 0.25
|
||||
support_material_extrusion_width = 0.18
|
||||
support_material_extrusion_width = 0.2
|
||||
support_material_interface_layers = 0
|
||||
support_material_interface_spacing = 0.15
|
||||
support_material_spacing = 1
|
||||
|
|
@ -155,6 +159,7 @@ infill_extrusion_width = 0.7
|
|||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
top_infill_extrusion_width = 0.6
|
||||
support_material_extrusion_width = 0.55
|
||||
|
||||
[print:*soluble_support*]
|
||||
overhangs = 1
|
||||
|
|
@ -206,33 +211,25 @@ infill_extrusion_width = 0.5
|
|||
|
||||
[print:0.05mm ULTRADETAIL MK3]
|
||||
inherits = *0.05mm*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
fill_pattern = grid
|
||||
top_infill_extrusion_width = 0.4
|
||||
|
||||
[print:0.05mm ULTRADETAIL 0.25 nozzle]
|
||||
inherits = *0.05mm*; *0.25nozzle*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
||||
external_perimeter_extrusion_width = 0
|
||||
extrusion_width = 0.28
|
||||
fill_density = 20%
|
||||
first_layer_extrusion_width = 0.3
|
||||
infill_extrusion_width = 0
|
||||
infill_speed = 20
|
||||
max_print_speed = 100
|
||||
perimeter_extrusion_width = 0
|
||||
perimeter_speed = 20
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_extrusion_width = 0
|
||||
solid_infill_speed = 20
|
||||
support_material_speed = 20
|
||||
top_infill_extrusion_width = 0
|
||||
|
||||
[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
|
||||
inherits = *0.05mm*; *0.25nozzle*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
||||
fill_pattern = grid
|
||||
top_infill_extrusion_width = 0.4
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.10mm ---XXX
|
||||
|
|
@ -259,7 +256,7 @@ solid_infill_speed = 50
|
|||
[print:0.10mm DETAIL MK3]
|
||||
inherits = *0.10mm*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
|
|
@ -294,7 +291,6 @@ infill_speed = 200
|
|||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 200
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.10mm DETAIL 0.6 nozzle MK3]
|
||||
|
|
@ -308,7 +304,6 @@ infill_speed = 200
|
|||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 200
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
|
@ -358,7 +353,6 @@ perimeter_acceleration = 600
|
|||
perimeter_speed = 25
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_speed = 40
|
||||
support_material_extrusion_width = 0.2
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.15mm OPTIMAL 0.6 nozzle]
|
||||
|
|
@ -368,7 +362,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
|||
[print:0.15mm OPTIMAL MK3]
|
||||
inherits = *0.15mm*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
|
|
@ -436,6 +430,32 @@ perimeter_speed = 45
|
|||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.15mm OPTIMAL MK3 MMU2]
|
||||
inherits = 0.15mm OPTIMAL MK3
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material
|
||||
bottom_solid_layers = 4
|
||||
external_perimeter_speed = 40
|
||||
fill_density = 10%
|
||||
infill_overlap = 15%
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
support_material_threshold = 20
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:0.20mm FAST MK3 MMU2]
|
||||
inherits = 0.20mm FAST MK3
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material
|
||||
bridge_flow_ratio = 0.8
|
||||
external_perimeter_speed = 40
|
||||
fill_density = 15%
|
||||
infill_overlap = 35%
|
||||
infill_speed = 150
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 150
|
||||
wipe_tower_x = 169
|
||||
wipe_tower_y = 137
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
|
@ -455,7 +475,7 @@ top_solid_infill_speed = 70
|
|||
[print:0.20mm FAST MK3]
|
||||
inherits = *0.20mm*
|
||||
bridge_speed = 30
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
|
|
@ -544,7 +564,6 @@ external_perimeter_extrusion_width = 0.6
|
|||
external_perimeter_speed = 30
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
perimeter_speed = 40
|
||||
support_material_extrusion_width = 0.55
|
||||
support_material_interface_layers = 3
|
||||
support_material_xy_spacing = 120%
|
||||
top_infill_extrusion_width = 0.57
|
||||
|
|
@ -563,12 +582,16 @@ support_material_xy_spacing = 150%
|
|||
[filament:*common*]
|
||||
cooling = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
filament_loading_speed = 28
|
||||
filament_unloading_speed = 90
|
||||
filament_toolchange_delay = 0
|
||||
filament_cooling_moves = 4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
|
|
@ -635,7 +658,8 @@ temperature = 255
|
|||
inherits = *common*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 1
|
||||
extrusion_multiplier = 1.2
|
||||
|
|
@ -653,7 +677,8 @@ temperature = 240
|
|||
|
||||
[filament:ColorFabb Brass Bronze]
|
||||
inherits = *PLA*
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
extrusion_multiplier = 1.2
|
||||
filament_colour = #804040
|
||||
filament_max_volumetric_speed = 10
|
||||
|
|
@ -678,7 +703,8 @@ inherits = *PLA*
|
|||
|
||||
[filament:ColorFabb Woodfil]
|
||||
inherits = *PLA*
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
extrusion_multiplier = 1.2
|
||||
filament_colour = #804040
|
||||
filament_max_volumetric_speed = 10
|
||||
|
|
@ -759,7 +785,8 @@ temperature = 275
|
|||
|
||||
[filament:Fillamentum Timberfil]
|
||||
inherits = *PLA*
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
extrusion_multiplier = 1.2
|
||||
filament_colour = #804040
|
||||
filament_max_volumetric_speed = 10
|
||||
|
|
@ -829,6 +856,21 @@ filament_notes = "List of manufacturers tested with standart PET print settings
|
|||
inherits = *PLA*
|
||||
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
||||
|
||||
[filament:*PLA MMU2*]
|
||||
inherits = Prusa PLA
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material
|
||||
filament_cooling_final_speed = 50
|
||||
filament_cooling_initial_speed = 10
|
||||
filament_cooling_moves = 7
|
||||
filament_loading_speed = 14
|
||||
filament_ramming_parameters = "120 110 4.03226 4.12903 4.25806 4.41935 4.58065 4.80645 5.35484 6.29032 7.58065 9.09677 10.5806 11.8387 12.6452 12.9677| 0.05 4.01935 0.45 4.15483 0.95 4.50968 1.45 4.94516 1.95 6.79677 2.45 9.87102 2.95 12.4388 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
|
||||
[filament:Generic PLA MMU2]
|
||||
inherits = *PLA MMU2*
|
||||
|
||||
[filament:Prusa PLA MMU2]
|
||||
inherits = *PLA MMU2*
|
||||
|
||||
[filament:SemiFlex or Flexfill 98A]
|
||||
inherits = *FLEX*
|
||||
|
||||
|
|
@ -912,6 +954,23 @@ end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbe
|
|||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1500
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.07
|
||||
|
|
@ -935,7 +994,7 @@ retract_speed = 35
|
|||
serial_port =
|
||||
serial_speed = 250000
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
|
|
@ -971,9 +1030,8 @@ printer_model = MK2SMM
|
|||
inherits = *multimaterial*
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
default_filament_profile = Prusa PLA
|
||||
|
||||
[printer:*mm-multi*]
|
||||
inherits = *multimaterial*
|
||||
|
|
@ -981,10 +1039,9 @@ end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.
|
|||
extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
|
||||
variable_layer_height = 0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
default_filament_profile = Prusa PLA
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK2 ---XXX
|
||||
|
|
@ -1005,7 +1062,7 @@ printer_variant = 0.25
|
|||
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
||||
|
||||
[printer:Original Prusa i3 MK2 0.6 nozzle]
|
||||
inherits = *common*; *0.6nozzle*
|
||||
inherits = *common*
|
||||
max_layer_height = 0.35
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.6
|
||||
|
|
@ -1020,7 +1077,7 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|||
inherits = *mm-single*
|
||||
|
||||
[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
|
||||
inherits = *mm-single*; *0.6nozzle*
|
||||
inherits = *mm-single*
|
||||
nozzle_diameter = 0.6
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
|
@ -1030,7 +1087,7 @@ inherits = *mm-multi*
|
|||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
|
||||
[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
|
||||
inherits = *mm-multi*; *0.6nozzle*
|
||||
inherits = *mm-multi*
|
||||
nozzle_diameter = 0.6,0.6,0.6,0.6
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
|
@ -1042,17 +1099,17 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|||
[printer:Original Prusa i3 MK2.5]
|
||||
inherits = Original Prusa i3 MK2
|
||||
printer_model = MK2.5
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2 0.25 nozzle
|
||||
printer_model = MK2.5
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2 0.6 nozzle
|
||||
printer_model = MK2.5
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK3 ---XXX
|
||||
|
|
@ -1061,38 +1118,75 @@ start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z50
|
|||
[printer:Original Prusa i3 MK3]
|
||||
inherits = *common*
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
machine_max_acceleration_e = 9000,9000
|
||||
machine_max_acceleration_extruding = 1250,960
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,1000
|
||||
machine_max_acceleration_y = 1000,1000
|
||||
machine_max_acceleration_z = 1000,1000
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,172
|
||||
machine_max_feedrate_y = 200,172
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 1.5,1.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
start_gcode = M115 U3.3.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
default_print_profile = 0.15mm OPTIMAL MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 0.25 nozzle]
|
||||
inherits = *common*
|
||||
inherits = Original Prusa i3 MK3
|
||||
nozzle_diameter = 0.25
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
max_layer_height = 0.1
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 0.6 nozzle]
|
||||
inherits = *common*
|
||||
inherits = Original Prusa i3 MK3
|
||||
nozzle_diameter = 0.6
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
max_layer_height = 0.35
|
||||
min_layer_height = 0.1
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||
|
||||
[printer:*mm2*]
|
||||
inherits = Original Prusa i3 MK3
|
||||
single_extruder_multi_material = 1
|
||||
max_print_height = 200
|
||||
cooling_tube_length = 10
|
||||
cooling_tube_retraction = 30
|
||||
parking_pos_retraction = 85
|
||||
retract_length_toolchange = 3
|
||||
extra_loading_move = -13
|
||||
printer_model = MK3MM2
|
||||
default_print_profile = 0.15mm OPTIMAL MK3 MMU2
|
||||
default_filament_profile = Prusa PLA MMU2
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2 Single]
|
||||
inherits = *mm2*
|
||||
start_gcode = M107\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n ; go outside print area\nG1 Y-3.0 F1000.0 \nG1 Z0.4 F1000\n; select extruder\nT?\n; initial load\nG1 X50 E15 F1073\nG1 X100 E10 F2000\nG1 Z0.3 F1000\n\nG92 E0.0\nG1 X240.0 E15.0 F2400.0 \nG1 Y-2.0 F1000.0\nG1 X100.0 E10 F1400.0 \nG1 Z0.20 F1000\nG1 X0.0 E4 F1000.0\n\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2]
|
||||
inherits = *mm2*
|
||||
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
||||
# (for example the retract values) are duplicaed from the first value, so they do not need
|
||||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FFFF00;#FFFFFF;#804040;#0000FF;#C0C0C0
|
||||
start_gcode = M107\n\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
||||
end_gcode = G1 E-15.0000 F3000\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
|
||||
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
|
||||
[obsolete_presets]
|
||||
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3"
|
||||
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
||||
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
||||
|
|
|
|||
|
|
@ -22,8 +22,8 @@ struct PrintBoxDetection
|
|||
{
|
||||
vec3 min;
|
||||
vec3 max;
|
||||
// xyz contains the offset, if w == 1.0 detection needs to be performed
|
||||
vec4 volume_origin;
|
||||
bool volume_detection;
|
||||
mat4 volume_world_matrix;
|
||||
};
|
||||
|
||||
uniform PrintBoxDetection print_box;
|
||||
|
|
@ -54,9 +54,9 @@ void main()
|
|||
intensity.x += NdotL * LIGHT_FRONT_DIFFUSE;
|
||||
|
||||
// compute deltas for out of print volume detection (world coordinates)
|
||||
if (print_box.volume_origin.w == 1.0)
|
||||
if (print_box.volume_detection)
|
||||
{
|
||||
vec3 v = gl_Vertex.xyz + print_box.volume_origin.xyz;
|
||||
vec3 v = (print_box.volume_world_matrix * gl_Vertex).xyz;
|
||||
delta_box_min = v - print_box.min;
|
||||
delta_box_max = v - print_box.max;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -14,6 +14,8 @@ const vec3 LIGHT_FRONT_DIR = vec3(0.6985074, 0.1397015, 0.6985074);
|
|||
|
||||
#define INTENSITY_AMBIENT 0.3
|
||||
|
||||
uniform mat4 volume_world_matrix;
|
||||
|
||||
// x = tainted, y = specular;
|
||||
varying vec2 intensity;
|
||||
|
||||
|
|
@ -38,9 +40,8 @@ void main()
|
|||
NdotL = max(dot(normal, LIGHT_FRONT_DIR), 0.0);
|
||||
|
||||
intensity.x += NdotL * LIGHT_FRONT_DIFFUSE;
|
||||
|
||||
// Scaled to widths of the Z texture.
|
||||
object_z = gl_Vertex.z;
|
||||
|
||||
// Scaled to widths of the Z texture.
|
||||
object_z = (volume_world_matrix * gl_Vertex).z;
|
||||
gl_Position = ftransform();
|
||||
}
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue