Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_sequential
This commit is contained in:
enricoturri1966
commit
e78e3ad80b
83 changed files with 5187 additions and 4933 deletions
File diff suppressed because it is too large
Load diff
Binary file not shown.
File diff suppressed because it is too large
Load diff
|
|
@ -78,7 +78,6 @@ src/libslic3r/ExtrusionEntity.cpp
|
|||
src/libslic3r/Flow.cpp
|
||||
src/libslic3r/Format/3mf.cpp
|
||||
src/libslic3r/Format/AMF.cpp
|
||||
src/libslic3r/GCode/PreviewData.cpp
|
||||
src/libslic3r/miniz_extension.cpp
|
||||
src/libslic3r/Preset.cpp
|
||||
src/libslic3r/Print.cpp
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 42 KiB After Width: | Height: | Size: 33 KiB |
|
|
@ -1,4 +1,5 @@
|
|||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
|
||||
0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
|
||||
0.0.4 Added initial CR-10 profile, end g-code improvements.
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
name = Creality
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.5
|
||||
config_version = 0.0.6
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
|
@ -435,9 +435,9 @@ inherits = *PLA*
|
|||
renamed_from = "Creality PLA @ENDER3"
|
||||
filament_vendor = Creality
|
||||
temperature = 200
|
||||
bed_temperature = 50
|
||||
bed_temperature = 60
|
||||
first_layer_temperature = 205
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_bed_temperature = 60
|
||||
filament_colour = #42BDD8
|
||||
|
||||
[filament:Creality PETG @CREALITY]
|
||||
|
|
@ -467,9 +467,9 @@ inherits = *PLA*
|
|||
renamed_from = "Prusament PLA @ENDER3"
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 210
|
||||
bed_temperature = 50
|
||||
bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_bed_temperature = 60
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.24
|
||||
filament_colour = #F94D0C
|
||||
|
|
@ -508,6 +508,17 @@ filament_cost = 19.00
|
|||
filament_density = 1.24
|
||||
filament_colour = #FF0000
|
||||
|
||||
[filament:Devil Design PLA (Galaxy) @CREALITY]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Devil Design
|
||||
temperature = 225
|
||||
bed_temperature = 65
|
||||
first_layer_temperature = 225
|
||||
first_layer_bed_temperature = 65
|
||||
filament_cost = 19.00
|
||||
filament_density = 1.24
|
||||
filament_colour = #FF0000
|
||||
|
||||
[filament:Extrudr PLA NX2 @CREALITY]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Extrudr
|
||||
|
|
@ -568,6 +579,7 @@ filament_colour = #FFE200
|
|||
printer_technology = FFF
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
pause_print_gcode =
|
||||
deretract_speed = 0
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB After Width: | Height: | Size: 28 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 43 KiB After Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 43 KiB After Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB After Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 40 KiB After Width: | Height: | Size: 27 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 45 KiB After Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB After Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 37 KiB After Width: | Height: | Size: 23 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 55 KiB After Width: | Height: | Size: 40 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 50 KiB After Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 40 KiB After Width: | Height: | Size: 27 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 47 KiB After Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB After Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB After Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 49 KiB After Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 54 KiB After Width: | Height: | Size: 50 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 46 KiB After Width: | Height: | Size: 48 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 62 KiB After Width: | Height: | Size: 42 KiB |
|
|
@ -1,3 +1,5 @@
|
|||
min_slic3r_version = 2.3.0-alpha3
|
||||
0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.2 Added 0.15mm print profile
|
||||
0.0.1 Initial TriLAB bundle
|
||||
|
|
|
|||
|
|
@ -1,13 +1,12 @@
|
|||
# DeltiQ presets for PrusaSlicer
|
||||
# https://github.com/prusa3d/PrusaSlicer-settings/pull/100
|
||||
# based on https://github.com/trilab3d/Slicer-profiles/tree/deltiq/Slic3r_PE_1_41_3
|
||||
# Print profiles for the TriLAB printers
|
||||
# based on https://github.com/trilab3d/PrusaSlicer-settings/tree/master/live/TriLAB
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = TriLAB
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.2
|
||||
config_version = 0.0.3
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
|
@ -16,215 +15,364 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
|
|||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:DQM]
|
||||
name = TRILAB DeltiQ M
|
||||
[printer_model:DQ2]
|
||||
name = DeltiQ 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
bed_model =
|
||||
bed_texture =
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
[printer_model:DQ2P]
|
||||
name = DeltiQ 2 Plus
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
[printer_model:DQ2+FP2]
|
||||
name = DeltiQ 2 + FlexPrint 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FlexPrint 2 FLEX; DeltiQ FlexPrint 2 FLEX Smartfil; DeltiQ FlexPrint 2 PLA; DeltiQ FlexPrint 2 ASA; DeltiQ FlexPrint 2 PET; DeltiQ FlexPrint 2 ABS; DeltiQ FlexPrint 2 CPE
|
||||
|
||||
[printer_model:DQ2P+FP2]
|
||||
name = DeltiQ 2 Plus + FlexPrint 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FlexPrint 2 FLEX; DeltiQ FlexPrint 2 FLEX Smartfil; DeltiQ FlexPrint 2 PLA; DeltiQ FlexPrint 2 ASA; DeltiQ FlexPrint 2 PET; DeltiQ FlexPrint 2 ABS; DeltiQ FlexPrint 2 CPE
|
||||
|
||||
[printer_model:DQ2+FP]
|
||||
name = DeltiQ 2 + FlexPrint
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FlexPrint FLEX; DeltiQ FlexPrint PLA; DeltiQ FlexPrint ASA; DeltiQ FlexPrint PET; DeltiQ FlexPrint ABS; DeltiQ FlexPrint CPE
|
||||
|
||||
[printer_model:DQ2P+FP]
|
||||
name = DeltiQ 2 Plus + FlexPrint
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FlexPrint FLEX; DeltiQ FlexPrint PLA; DeltiQ FlexPrint ASA; DeltiQ FlexPrint PET; DeltiQ FlexPrint ABS; DeltiQ FlexPrint CPE
|
||||
|
||||
[printer_model:DQM]
|
||||
name = DeltiQ M
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
[printer_model:DQL]
|
||||
name = TRILAB DeltiQ L
|
||||
name = DeltiQ L
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
bed_model =
|
||||
bed_texture =
|
||||
family = DeltiQ
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
[printer_model:DQXL]
|
||||
name = TRILAB DeltiQ XL
|
||||
name = DeltiQ XL
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
bed_model =
|
||||
bed_texture =
|
||||
family = DeltiQ
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
[print:DeltiQ 0.15mm]
|
||||
inherits = DeltiQ 0.2mm
|
||||
layer_height = 0.15
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 6
|
||||
|
||||
[print:DeltiQ 0.2mm]
|
||||
[print:DeltiQ 0.20mm Normal]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0.7
|
||||
bridge_acceleration = 1000
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 20
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 0
|
||||
compatible_printers_condition = printer_notes=~/.*TRILAB.*/
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/
|
||||
complete_objects = 0
|
||||
default_acceleration = 2000
|
||||
dont_support_bridges = 1
|
||||
elefant_foot_compensation = 0
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeter_extrusion_width = 0.4
|
||||
dont_support_bridges = 0
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.4
|
||||
extruder_clearance_height = 60
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
fill_density = 20%
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_extrusion_width = 0.4
|
||||
first_layer_height = 0.3
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 50
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 2000
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.55
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 50
|
||||
inherits =
|
||||
infill_speed = 60
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
layer_height = 0.2
|
||||
max_print_speed = 100
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 10
|
||||
max_print_speed = 60
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode
|
||||
overhangs = 0
|
||||
output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}.gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 1500
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.4
|
||||
perimeter_speed = 40
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 45
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirt_distance = 3
|
||||
skirt_height = 2
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_below_area = 15
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.4
|
||||
solid_infill_speed = 50
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_angle = 40
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.15
|
||||
support_material_contact_distance = 0.1
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_interface_layers = 4
|
||||
support_material_interface_spacing = 0.4
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 55
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 100%
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 0.6
|
||||
thin_walls = 0
|
||||
threads = 4
|
||||
threads = 12
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 30
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 5
|
||||
top_solid_min_thickness = 0.7
|
||||
travel_speed = 150
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:DeltiQ 0.10mm Normal]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
bottom_solid_layers = 7
|
||||
bottom_solid_min_thickness = 0.7
|
||||
bridge_flow_ratio = 0.7
|
||||
bridge_speed = 30
|
||||
ensure_vertical_shell_thickness = 1
|
||||
layer_height = 0.1
|
||||
first_layer_height = 0.2
|
||||
top_solid_layers = 9
|
||||
top_solid_min_thickness = 0.7
|
||||
top_infill_extrusion_width = 0.4
|
||||
fill_pattern = grid
|
||||
fill_density = 20%
|
||||
|
||||
[print:DeltiQ 0.15mm Normal]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
bottom_solid_layers = 5
|
||||
bottom_solid_min_thickness = 0.7
|
||||
bridge_flow_ratio = 0.7
|
||||
bridge_speed = 30
|
||||
ensure_vertical_shell_thickness = 1
|
||||
layer_height = 0.15
|
||||
first_layer_height = 0.2
|
||||
top_solid_layers = 7
|
||||
top_solid_min_thickness = 0.7
|
||||
fill_pattern = grid
|
||||
fill_density = 20%
|
||||
|
||||
[print:DeltiQ 0.20mm Vase]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
perimeters = 1
|
||||
top_solid_layers = 0
|
||||
fill_density = 0
|
||||
support_material = 0
|
||||
spiral_vase = 1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
thin_walls = 0
|
||||
|
||||
[print:DeltiQ 0.20mm FLEX]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_flow_ratio = 0.90
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*FLEXPRINT.*/
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
overhangs = 0
|
||||
seam_position = nearest
|
||||
thin_walls = 0
|
||||
bridge_speed = 20
|
||||
external_perimeter_speed = 20
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 25
|
||||
infill_speed = 30
|
||||
perimeter_speed = 25
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 30
|
||||
support_material_contact_distance = 0.3
|
||||
top_solid_infill_speed = 20
|
||||
top_fill_pattern = rectilinear
|
||||
fill_pattern = grid
|
||||
fill_density = 25%
|
||||
travel_speed = 200
|
||||
max_print_speed = 30
|
||||
complete_objects = 1
|
||||
|
||||
|
||||
[filament:*DeltiQ common*]
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 50
|
||||
compatible_printers_condition = printer_notes=~/.*TRILAB.*/
|
||||
cooling = 1
|
||||
filament_vendor = Generic
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/)
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = ""
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #FF3232
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 1.25
|
||||
filament_colour = #FF0000
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 10
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
start_filament_gcode = "; FILAMENT_START_GCODE"
|
||||
end_filament_gcode = "; FILAMENT_END_GCODE"
|
||||
|
||||
[filament:DeltiQ PET]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = DevilDesign
|
||||
filament_cost = 480
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 4.1
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 45
|
||||
filament_type = PET
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = ""
|
||||
temperature = 245
|
||||
|
||||
[filament:DeltiQ PET]
|
||||
inherits = *DeltiQ common*
|
||||
|
||||
[filament:DeltiQ PLA]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 1
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 767
|
||||
filament_density = 1.24
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 90%
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 4.0
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 30
|
||||
filament_type = PLA
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 215
|
||||
first_layer_temperature = 220
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 85
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 210
|
||||
temperature = 215
|
||||
|
||||
[filament:DeltiQ ABS]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 100
|
||||
bridge_fan_speed = 20
|
||||
filament_density = 1.04
|
||||
bridge_fan_speed = 25
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 774
|
||||
filament_density = 1.08
|
||||
filament_max_volumetric_speed = 4
|
||||
filament_retract_before_travel = 3
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 4.1
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 25
|
||||
filament_type = ABS
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 255
|
||||
max_fan_speed = 20
|
||||
max_fan_speed = 15
|
||||
min_fan_speed = 5
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 15
|
||||
temperature = 255
|
||||
|
||||
|
|
@ -237,11 +385,160 @@ temperature = 265
|
|||
|
||||
[filament:DeltiQ CPE]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 85
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 1214
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 4.3
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 45
|
||||
filament_type = CPE
|
||||
first_layer_bed_temperature = 85
|
||||
first_layer_temperature = 260
|
||||
temperature = 265
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 265
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
temperature = 260
|
||||
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 PET]
|
||||
inherits = DeltiQ PET
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
filament_retract_length = 1.4
|
||||
filament_retract_speed = 35
|
||||
filament_retract_before_wipe = 0%
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 PLA]
|
||||
inherits = DeltiQ PLA
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
filament_retract_length = 1.2
|
||||
filament_retract_speed = 28
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 ABS]
|
||||
inherits = DeltiQ ABS
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
filament_retract_length = 0.8
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 ASA]
|
||||
inherits = DeltiQ ASA
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 CPE]
|
||||
inherits = DeltiQ CPE
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
filament_retract_length = 0.8
|
||||
filament_retract_speed = 35
|
||||
filament_deretract_speed = 0
|
||||
filament_retract_before_wipe = 0%
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 FLEX]
|
||||
inherits = *DeltiQ common*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
extrusion_multiplier = 1.07
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 1870
|
||||
filament_density = 1.22
|
||||
filament_deretract_speed = 0
|
||||
filament_max_volumetric_speed = 2.9
|
||||
filament_retract_before_travel = 1
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 1.6
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = 20
|
||||
filament_type = FLEX
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 225
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 5
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 225
|
||||
|
||||
[filament:DeltiQ FlexPrint 2 FLEX Smartfil]
|
||||
inherits = *DeltiQ common*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.07
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Smart Materials 3D
|
||||
filament_cost = 1209
|
||||
filament_density = 1.21
|
||||
filament_deretract_speed = 0
|
||||
filament_max_volumetric_speed = 2.5
|
||||
filament_retract_before_travel = 1
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 1.2
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = 20
|
||||
filament_type = FLEX
|
||||
filament_wipe = 0
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 240
|
||||
|
||||
|
||||
[filament:DeltiQ FlexPrint PET]
|
||||
inherits = DeltiQ PET
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FlexPrint PLA]
|
||||
inherits = DeltiQ PLA
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 28
|
||||
|
||||
[filament:DeltiQ FlexPrint ABS]
|
||||
inherits = DeltiQ ABS
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FlexPrint ASA]
|
||||
inherits = DeltiQ ASA
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FlexPrint CPE]
|
||||
inherits = DeltiQ CPE
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
filament_deretract_speed = 0
|
||||
filament_retract_before_wipe = 0%
|
||||
|
||||
|
||||
[printer:*DeltiQ*]
|
||||
|
|
@ -251,64 +548,117 @@ before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
|
|||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = ""
|
||||
default_print_profile =
|
||||
deretract_speed = 25
|
||||
default_filament_profile = "DeltiQ PLA"
|
||||
default_print_profile = DeltiQ 0.20mm Normal
|
||||
deretract_speed = 0
|
||||
end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_colour = #FF0000
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = repetier
|
||||
host_type = octoprint
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 500,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 500,200
|
||||
machine_max_feedrate_y = 500,200
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 10,10
|
||||
machine_max_jerk_y = 10,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.25
|
||||
max_print_height = 320
|
||||
min_layer_height = 0.15
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
print_host =
|
||||
printer_model =
|
||||
printer_notes = TRILAB
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL
|
||||
printer_settings_id =
|
||||
printer_variant =
|
||||
printer_vendor =
|
||||
printer_vendor = TriLAB Group s.r.o.
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_travel = 3
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 4.1
|
||||
retract_length = 4.0
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.3
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_lift_below = 319
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 33
|
||||
silent_mode = 1
|
||||
retract_speed = 30
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 0
|
||||
wipe = 0
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
[printer:*DeltiQ 2*]
|
||||
inherits = *DeltiQ*
|
||||
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
|
||||
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
|
||||
gcode_flavor = reprap
|
||||
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
pause_print_gcode = M0
|
||||
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
|
||||
|
||||
[printer:*DeltiQ 2 FlexPrint*]
|
||||
inherits = *DeltiQ 2*
|
||||
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
|
||||
default_print_profile = DeltiQ 0.20mm FLEX
|
||||
default_filament_profile = "DeltiQ FlexPrint 2 FLEX"
|
||||
retract_length = 0.7
|
||||
retract_speed = 25
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1
|
||||
|
||||
[printer:*DeltiQ 2 FlexPrint 2*]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
default_filament_profile = "DeltiQ FlexPrint 2 FLEX"
|
||||
retract_length = 0.8
|
||||
retract_speed = 25
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2
|
||||
|
||||
[printer:DeltiQ 2]
|
||||
inherits = *DeltiQ 2*
|
||||
printer_model = DQ2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ 2 Plus]
|
||||
inherits = *DeltiQ 2*
|
||||
printer_model = DQ2P
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
[printer:DeltiQ 2 + FlexPrint 2]
|
||||
inherits = *DeltiQ 2 FlexPrint 2*
|
||||
printer_model = DQ2+FP2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ 2 Plus + FlexPrint 2]
|
||||
inherits = *DeltiQ 2 FlexPrint 2*
|
||||
printer_model = DQ2P+FP2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
[printer:DeltiQ 2 + FlexPrint]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
printer_model = DQ2+FP
|
||||
printer_variant = 0.4
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ 2 Plus + FlexPrint]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
printer_model = DQ2P+FP
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
[printer:DeltiQ L]
|
||||
inherits = *DeltiQ*
|
||||
printer_model = DQL
|
||||
|
|
@ -337,6 +687,6 @@ retract_length = 4.5
|
|||
retract_speed = 35
|
||||
|
||||
[presets]
|
||||
print = DeltiQ 0.2mm
|
||||
printer = DeltiQ L
|
||||
print = DeltiQ 0.20mm Normal
|
||||
printer = DeltiQ 2
|
||||
filament = DeltiQ PLA
|
||||
BIN
resources/profiles/TriLAB/DQ2+FP2_thumbnail.png
Normal file
BIN
resources/profiles/TriLAB/DQ2+FP2_thumbnail.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 34 KiB |
BIN
resources/profiles/TriLAB/DQ2+FP_thumbnail.png
Normal file
BIN
resources/profiles/TriLAB/DQ2+FP_thumbnail.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 34 KiB |
BIN
resources/profiles/TriLAB/DQ2P+FP2_thumbnail.png
Normal file
BIN
resources/profiles/TriLAB/DQ2P+FP2_thumbnail.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
BIN
resources/profiles/TriLAB/DQ2P+FP_thumbnail.png
Normal file
BIN
resources/profiles/TriLAB/DQ2P+FP_thumbnail.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
BIN
resources/profiles/TriLAB/DQ2P_thumbnail.png
Normal file
BIN
resources/profiles/TriLAB/DQ2P_thumbnail.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
BIN
resources/profiles/TriLAB/DQ2_thumbnail.png
Normal file
BIN
resources/profiles/TriLAB/DQ2_thumbnail.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 42 KiB After Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 36 KiB After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 42 KiB After Width: | Height: | Size: 34 KiB |
BIN
resources/profiles/TriLAB/dq2_bed.stl
Normal file
BIN
resources/profiles/TriLAB/dq2_bed.stl
Normal file
Binary file not shown.
|
|
@ -138,7 +138,6 @@ int CLI::run(int argc, char **argv)
|
|||
m_print_config.apply(config);
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// are we starting as gcodeviewer ?
|
||||
for (auto it = m_actions.begin(); it != m_actions.end(); ++it) {
|
||||
if (*it == "gcodeviewer") {
|
||||
|
|
@ -148,10 +147,8 @@ int CLI::run(int argc, char **argv)
|
|||
break;
|
||||
}
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Read input file(s) if any.
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
for (const std::string& file : m_input_files) {
|
||||
std::string ext = boost::filesystem::path(file).extension().string();
|
||||
if (ext == ".gcode" || ext == ".g") {
|
||||
|
|
@ -162,7 +159,6 @@ int CLI::run(int argc, char **argv)
|
|||
}
|
||||
}
|
||||
if (!start_as_gcodeviewer) {
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
for (const std::string& file : m_input_files) {
|
||||
if (!boost::filesystem::exists(file)) {
|
||||
boost::nowide::cerr << "No such file: " << file << std::endl;
|
||||
|
|
@ -195,9 +191,7 @@ int CLI::run(int argc, char **argv)
|
|||
}
|
||||
m_models.push_back(model);
|
||||
}
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Apply command line options to a more specific DynamicPrintConfig which provides normalize()
|
||||
// (command line options override --load files)
|
||||
|
|
@ -504,11 +498,7 @@ int CLI::run(int argc, char **argv)
|
|||
print->process();
|
||||
if (printer_technology == ptFFF) {
|
||||
// The outfile is processed by a PlaceholderParser.
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
outfile = fff_print.export_gcode(outfile, nullptr, nullptr);
|
||||
#else
|
||||
outfile = fff_print.export_gcode(outfile, nullptr);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
outfile_final = fff_print.print_statistics().finalize_output_path(outfile);
|
||||
} else {
|
||||
outfile = sla_print.output_filepath(outfile);
|
||||
|
|
@ -559,11 +549,6 @@ int CLI::run(int argc, char **argv)
|
|||
<< " (" << print.total_extruded_volume()/1000 << "cm3)" << std::endl;
|
||||
*/
|
||||
}
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
} else if (opt_key == "gcodeviewer") {
|
||||
start_gui = true;
|
||||
start_as_gcodeviewer = true;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
} else {
|
||||
boost::nowide::cerr << "error: option not supported yet: " << opt_key << std::endl;
|
||||
return 1;
|
||||
|
|
|
|||
|
|
@ -38,9 +38,7 @@ void AppConfig::reset()
|
|||
// Override missing or keys with their defaults.
|
||||
void AppConfig::set_defaults()
|
||||
{
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
if (m_mode == EAppMode::Editor) {
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
// Reset the empty fields to defaults.
|
||||
if (get("autocenter").empty())
|
||||
set("autocenter", "0");
|
||||
|
|
@ -98,17 +96,6 @@ void AppConfig::set_defaults()
|
|||
if (get("auto_toolbar_size").empty())
|
||||
set("auto_toolbar_size", "100");
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
if (get("use_perspective_camera").empty())
|
||||
set("use_perspective_camera", "1");
|
||||
|
||||
if (get("use_free_camera").empty())
|
||||
set("use_free_camera", "0");
|
||||
|
||||
if (get("reverse_mouse_wheel_zoom").empty())
|
||||
set("reverse_mouse_wheel_zoom", "0");
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
#if ENABLE_ENVIRONMENT_MAP
|
||||
if (get("use_environment_map").empty())
|
||||
set("use_environment_map", "0");
|
||||
|
|
@ -116,7 +103,6 @@ void AppConfig::set_defaults()
|
|||
|
||||
if (get("use_inches").empty())
|
||||
set("use_inches", "0");
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
}
|
||||
|
||||
if (get("seq_top_layer_only").empty())
|
||||
|
|
@ -130,7 +116,6 @@ void AppConfig::set_defaults()
|
|||
|
||||
if (get("reverse_mouse_wheel_zoom").empty())
|
||||
set("reverse_mouse_wheel_zoom", "0");
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
if (get("show_splash_screen").empty())
|
||||
set("show_splash_screen", "1");
|
||||
|
|
@ -247,14 +232,10 @@ void AppConfig::save()
|
|||
|
||||
boost::nowide::ofstream c;
|
||||
c.open(path_pid, std::ios::out | std::ios::trunc);
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
if (m_mode == EAppMode::Editor)
|
||||
c << "# " << Slic3r::header_slic3r_generated() << std::endl;
|
||||
else
|
||||
c << "# " << Slic3r::header_gcodeviewer_generated() << std::endl;
|
||||
#else
|
||||
c << "# " << Slic3r::header_slic3r_generated() << std::endl;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
// Make sure the "no" category is written first.
|
||||
for (const std::pair<std::string, std::string> &kvp : m_storage[""])
|
||||
c << kvp.first << " = " << kvp.second << std::endl;
|
||||
|
|
@ -455,15 +436,11 @@ void AppConfig::reset_selections()
|
|||
|
||||
std::string AppConfig::config_path()
|
||||
{
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string path = (m_mode == EAppMode::Editor) ?
|
||||
(boost::filesystem::path(Slic3r::data_dir()) / (SLIC3R_APP_KEY ".ini")).make_preferred().string() :
|
||||
(boost::filesystem::path(Slic3r::data_dir()) / (GCODEVIEWER_APP_KEY ".ini")).make_preferred().string();
|
||||
|
||||
return path;
|
||||
#else
|
||||
return (boost::filesystem::path(Slic3r::data_dir()) / (SLIC3R_APP_KEY ".ini")).make_preferred().string();
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
}
|
||||
|
||||
std::string AppConfig::version_check_url() const
|
||||
|
|
@ -474,11 +451,7 @@ std::string AppConfig::version_check_url() const
|
|||
|
||||
bool AppConfig::exists()
|
||||
{
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
return boost::filesystem::exists(config_path());
|
||||
#else
|
||||
return boost::filesystem::exists(AppConfig::config_path());
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
}
|
||||
|
||||
}; // namespace Slic3r
|
||||
|
|
|
|||
|
|
@ -15,7 +15,6 @@ namespace Slic3r {
|
|||
class AppConfig
|
||||
{
|
||||
public:
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
enum class EAppMode : unsigned char
|
||||
{
|
||||
Editor,
|
||||
|
|
@ -23,14 +22,9 @@ public:
|
|||
};
|
||||
|
||||
explicit AppConfig(EAppMode mode) :
|
||||
#else
|
||||
AppConfig() :
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
m_dirty(false),
|
||||
m_orig_version(Semver::invalid()),
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
m_mode(mode),
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
m_legacy_datadir(false)
|
||||
{
|
||||
this->reset();
|
||||
|
|
@ -135,11 +129,7 @@ public:
|
|||
void reset_selections();
|
||||
|
||||
// Get the default config path from Slic3r::data_dir().
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string config_path();
|
||||
#else
|
||||
static std::string config_path();
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Returns true if the user's data directory comes from before Slic3r 1.40.0 (no updating)
|
||||
bool legacy_datadir() const { return m_legacy_datadir; }
|
||||
|
|
@ -154,11 +144,7 @@ public:
|
|||
Semver orig_version() const { return m_orig_version; }
|
||||
|
||||
// Does the config file exist?
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
bool exists();
|
||||
#else
|
||||
static bool exists();
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
std::vector<std::string> get_recent_projects() const;
|
||||
void set_recent_projects(const std::vector<std::string>& recent_projects);
|
||||
|
|
@ -196,10 +182,8 @@ private:
|
|||
return true;
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// Type of application: Editor or GCodeViewer
|
||||
EAppMode m_mode { EAppMode::Editor };
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Map of section, name -> value
|
||||
std::map<std::string, std::map<std::string, std::string>> m_storage;
|
||||
// Map of enabled vendors / models / variants
|
||||
|
|
|
|||
|
|
@ -87,8 +87,6 @@ add_library(libslic3r STATIC
|
|||
GCode/PostProcessor.hpp
|
||||
# GCode/PressureEqualizer.cpp
|
||||
# GCode/PressureEqualizer.hpp
|
||||
GCode/PreviewData.cpp
|
||||
GCode/PreviewData.hpp
|
||||
GCode/PrintExtents.cpp
|
||||
GCode/PrintExtents.hpp
|
||||
GCode/SpiralVase.cpp
|
||||
|
|
|
|||
|
|
@ -192,6 +192,23 @@ bool unescape_strings_cstyle(const std::string &str, std::vector<std::string> &o
|
|||
}
|
||||
}
|
||||
|
||||
std::string escape_ampersand(const std::string& str)
|
||||
{
|
||||
// Allocate a buffer 2 times the input string length,
|
||||
// so the output will fit even if all input characters get escaped.
|
||||
std::vector<char> out(str.size() * 6, 0);
|
||||
char* outptr = out.data();
|
||||
for (size_t i = 0; i < str.size(); ++i) {
|
||||
char c = str[i];
|
||||
if (c == '&') {
|
||||
(*outptr++) = '&';
|
||||
(*outptr++) = '&';
|
||||
} else
|
||||
(*outptr++) = c;
|
||||
}
|
||||
return std::string(out.data(), outptr - out.data());
|
||||
}
|
||||
|
||||
std::vector<std::string> ConfigOptionDef::cli_args(const std::string &key) const
|
||||
{
|
||||
std::vector<std::string> args;
|
||||
|
|
|
|||
|
|
@ -34,6 +34,8 @@ extern std::string escape_strings_cstyle(const std::vector<std::string> &strs);
|
|||
extern bool unescape_string_cstyle(const std::string &str, std::string &out);
|
||||
extern bool unescape_strings_cstyle(const std::string &str, std::vector<std::string> &out);
|
||||
|
||||
extern std::string escape_ampersand(const std::string& str);
|
||||
|
||||
/// Specialization of std::exception to indicate that an unknown config option has been encountered.
|
||||
class UnknownOptionException : public Slic3r::RuntimeError {
|
||||
public:
|
||||
|
|
|
|||
|
|
@ -1,10 +1,6 @@
|
|||
#include "CustomGCode.hpp"
|
||||
#include "Config.hpp"
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include "GCode.hpp"
|
||||
#else
|
||||
#include "GCode/PreviewData.hpp"
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
#include "GCodeWriter.hpp"
|
||||
|
||||
namespace Slic3r {
|
||||
|
|
@ -21,11 +17,7 @@ extern void update_custom_gcode_per_print_z_from_config(Info& info, DynamicPrint
|
|||
return;
|
||||
if (info.gcodes.empty() && ! colorprint_heights->values.empty()) {
|
||||
// Convert the old colorprint_heighs only if there is no equivalent data in a new format.
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
const std::vector<std::string>& colors = ColorPrintColors::get();
|
||||
#else
|
||||
const std::vector<std::string>& colors = GCodePreviewData::ColorPrintColors();
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
const auto& colorprint_values = colorprint_heights->values;
|
||||
info.gcodes.clear();
|
||||
info.gcodes.reserve(colorprint_values.size());
|
||||
|
|
|
|||
|
|
@ -306,11 +306,7 @@ double ExtrusionLoop::min_mm3_per_mm() const
|
|||
std::string ExtrusionEntity::role_to_string(ExtrusionRole role)
|
||||
{
|
||||
switch (role) {
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
case erNone : return L("Unknown");
|
||||
#else
|
||||
case erNone : return L("None");
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
case erPerimeter : return L("Perimeter");
|
||||
case erExternalPerimeter : return L("External perimeter");
|
||||
case erOverhangPerimeter : return L("Overhang perimeter");
|
||||
|
|
|
|||
|
|
@ -546,9 +546,7 @@ namespace Slic3r {
|
|||
return gcode;
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
const std::vector<std::string> ColorPrintColors::Colors = { "#C0392B", "#E67E22", "#F1C40F", "#27AE60", "#1ABC9C", "#2980B9", "#9B59B6" };
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
#define EXTRUDER_CONFIG(OPT) m_config.OPT.get_at(m_writer.extruder()->id())
|
||||
|
||||
|
|
@ -687,7 +685,6 @@ std::vector<std::pair<coordf_t, std::vector<GCode::LayerToPrint>>> GCode::collec
|
|||
return layers_to_print;
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// free functions called by GCode::do_export()
|
||||
namespace DoExport {
|
||||
static void update_print_estimated_times_stats(const GCodeProcessor& processor, PrintStatistics& print_statistics)
|
||||
|
|
@ -700,9 +697,6 @@ namespace DoExport {
|
|||
} // namespace DoExport
|
||||
|
||||
void GCode::do_export(Print* print, const char* path, GCodeProcessor::Result* result, ThumbnailsGeneratorCallback thumbnail_cb)
|
||||
#else
|
||||
void GCode::do_export(Print* print, const char* path, GCodePreviewData* preview_data, ThumbnailsGeneratorCallback thumbnail_cb)
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
{
|
||||
PROFILE_CLEAR();
|
||||
|
||||
|
|
@ -724,10 +718,6 @@ void GCode::do_export(Print* print, const char* path, GCodePreviewData* preview_
|
|||
if (file == nullptr)
|
||||
throw Slic3r::RuntimeError(std::string("G-code export to ") + path + " failed.\nCannot open the file for writing.\n");
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
m_enable_analyzer = preview_data != nullptr;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
try {
|
||||
m_placeholder_parser_failed_templates.clear();
|
||||
this->_do_export(*print, file, thumbnail_cb);
|
||||
|
|
@ -759,35 +749,12 @@ void GCode::do_export(Print* print, const char* path, GCodePreviewData* preview_
|
|||
throw Slic3r::RuntimeError(msg);
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
BOOST_LOG_TRIVIAL(debug) << "Start processing gcode, " << log_memory_info();
|
||||
m_processor.process_file(path_tmp, true, [print]() { print->throw_if_canceled(); });
|
||||
DoExport::update_print_estimated_times_stats(m_processor, print->m_print_statistics);
|
||||
if (result != nullptr)
|
||||
*result = std::move(m_processor.extract_result());
|
||||
BOOST_LOG_TRIVIAL(debug) << "Finished processing gcode, " << log_memory_info();
|
||||
#else
|
||||
GCodeTimeEstimator::PostProcessData normal_data = m_normal_time_estimator.get_post_process_data();
|
||||
GCodeTimeEstimator::PostProcessData silent_data = m_silent_time_estimator.get_post_process_data();
|
||||
|
||||
bool remaining_times_enabled = print->config().remaining_times.value;
|
||||
|
||||
BOOST_LOG_TRIVIAL(debug) << "Time estimator post processing" << log_memory_info();
|
||||
GCodeTimeEstimator::post_process(path_tmp, 60.0f, remaining_times_enabled ? &normal_data : nullptr, (remaining_times_enabled && m_silent_time_estimator_enabled) ? &silent_data : nullptr);
|
||||
|
||||
if (remaining_times_enabled) {
|
||||
m_normal_time_estimator.reset();
|
||||
if (m_silent_time_estimator_enabled)
|
||||
m_silent_time_estimator.reset();
|
||||
}
|
||||
|
||||
// starts analyzer calculations
|
||||
if (m_enable_analyzer) {
|
||||
BOOST_LOG_TRIVIAL(debug) << "Preparing G-code preview data" << log_memory_info();
|
||||
m_analyzer.calc_gcode_preview_data(*preview_data, [print]() { print->throw_if_canceled(); });
|
||||
m_analyzer.reset();
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
if (rename_file(path_tmp, path))
|
||||
throw Slic3r::RuntimeError(
|
||||
|
|
@ -804,88 +771,6 @@ void GCode::do_export(Print* print, const char* path, GCodePreviewData* preview_
|
|||
|
||||
// free functions called by GCode::_do_export()
|
||||
namespace DoExport {
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
static void init_time_estimators(const PrintConfig &config, GCodeTimeEstimator &normal_time_estimator, GCodeTimeEstimator &silent_time_estimator, bool &silent_time_estimator_enabled)
|
||||
{
|
||||
// resets time estimators
|
||||
normal_time_estimator.reset();
|
||||
normal_time_estimator.set_dialect(config.gcode_flavor);
|
||||
normal_time_estimator.set_extrusion_axis(config.get_extrusion_axis()[0]);
|
||||
silent_time_estimator_enabled = (config.gcode_flavor == gcfMarlin) && config.silent_mode;
|
||||
|
||||
// Until we have a UI support for the other firmwares than the Marlin, use the hardcoded default values
|
||||
// and let the user to enter the G-code limits into the start G-code.
|
||||
// If the following block is enabled for other firmwares than the Marlin, then the function
|
||||
// this->print_machine_envelope(file, print);
|
||||
// shall be adjusted as well to produce a G-code block compatible with the particular firmware flavor.
|
||||
if (config.gcode_flavor.value == gcfMarlin) {
|
||||
if (config.machine_limits_usage.value != MachineLimitsUsage::Ignore) {
|
||||
normal_time_estimator.set_max_acceleration((float)config.machine_max_acceleration_extruding.values[0]);
|
||||
normal_time_estimator.set_retract_acceleration((float)config.machine_max_acceleration_retracting.values[0]);
|
||||
normal_time_estimator.set_minimum_feedrate((float)config.machine_min_extruding_rate.values[0]);
|
||||
normal_time_estimator.set_minimum_travel_feedrate((float)config.machine_min_travel_rate.values[0]);
|
||||
normal_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::X, (float)config.machine_max_acceleration_x.values[0]);
|
||||
normal_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::Y, (float)config.machine_max_acceleration_y.values[0]);
|
||||
normal_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::Z, (float)config.machine_max_acceleration_z.values[0]);
|
||||
normal_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::E, (float)config.machine_max_acceleration_e.values[0]);
|
||||
normal_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::X, (float)config.machine_max_feedrate_x.values[0]);
|
||||
normal_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::Y, (float)config.machine_max_feedrate_y.values[0]);
|
||||
normal_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::Z, (float)config.machine_max_feedrate_z.values[0]);
|
||||
normal_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::E, (float)config.machine_max_feedrate_e.values[0]);
|
||||
normal_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::X, (float)config.machine_max_jerk_x.values[0]);
|
||||
normal_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::Y, (float)config.machine_max_jerk_y.values[0]);
|
||||
normal_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::Z, (float)config.machine_max_jerk_z.values[0]);
|
||||
normal_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::E, (float)config.machine_max_jerk_e.values[0]);
|
||||
}
|
||||
|
||||
if (silent_time_estimator_enabled)
|
||||
{
|
||||
silent_time_estimator.reset();
|
||||
silent_time_estimator.set_dialect(config.gcode_flavor);
|
||||
silent_time_estimator.set_extrusion_axis(config.get_extrusion_axis()[0]);
|
||||
|
||||
if (config.machine_limits_usage.value != MachineLimitsUsage::Ignore) {
|
||||
/* "Stealth mode" values can be just a copy of "normal mode" values
|
||||
* (when they aren't input for a printer preset).
|
||||
* Thus, use back value from values, instead of second one, which could be absent
|
||||
*/
|
||||
silent_time_estimator.set_max_acceleration((float)config.machine_max_acceleration_extruding.values.back());
|
||||
silent_time_estimator.set_retract_acceleration((float)config.machine_max_acceleration_retracting.values.back());
|
||||
silent_time_estimator.set_minimum_feedrate((float)config.machine_min_extruding_rate.values.back());
|
||||
silent_time_estimator.set_minimum_travel_feedrate((float)config.machine_min_travel_rate.values.back());
|
||||
silent_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::X, (float)config.machine_max_acceleration_x.values.back());
|
||||
silent_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::Y, (float)config.machine_max_acceleration_y.values.back());
|
||||
silent_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::Z, (float)config.machine_max_acceleration_z.values.back());
|
||||
silent_time_estimator.set_axis_max_acceleration(GCodeTimeEstimator::E, (float)config.machine_max_acceleration_e.values.back());
|
||||
silent_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::X, (float)config.machine_max_feedrate_x.values.back());
|
||||
silent_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::Y, (float)config.machine_max_feedrate_y.values.back());
|
||||
silent_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::Z, (float)config.machine_max_feedrate_z.values.back());
|
||||
silent_time_estimator.set_axis_max_feedrate(GCodeTimeEstimator::E, (float)config.machine_max_feedrate_e.values.back());
|
||||
silent_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::X, (float)config.machine_max_jerk_x.values.back());
|
||||
silent_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::Y, (float)config.machine_max_jerk_y.values.back());
|
||||
silent_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::Z, (float)config.machine_max_jerk_z.values.back());
|
||||
silent_time_estimator.set_axis_max_jerk(GCodeTimeEstimator::E, (float)config.machine_max_jerk_e.values.back());
|
||||
}
|
||||
|
||||
if (config.single_extruder_multi_material) {
|
||||
// As of now the fields are shown at the UI dialog in the same combo box as the ramming values, so they
|
||||
// are considered to be active for the single extruder multi-material printers only.
|
||||
silent_time_estimator.set_filament_load_times(config.filament_load_time.values);
|
||||
silent_time_estimator.set_filament_unload_times(config.filament_unload_time.values);
|
||||
}
|
||||
}
|
||||
}
|
||||
// Filament load / unload times are not specific to a firmware flavor. Let anybody use it if they find it useful.
|
||||
if (config.single_extruder_multi_material) {
|
||||
// As of now the fields are shown at the UI dialog in the same combo box as the ramming values, so they
|
||||
// are considered to be active for the single extruder multi-material printers only.
|
||||
normal_time_estimator.set_filament_load_times(config.filament_load_time.values);
|
||||
normal_time_estimator.set_filament_unload_times(config.filament_unload_time.values);
|
||||
}
|
||||
}
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
static void init_gcode_processor(const PrintConfig& config, GCodeProcessor& processor, bool& silent_time_estimator_enabled)
|
||||
{
|
||||
silent_time_estimator_enabled = (config.gcode_flavor == gcfMarlin) && config.silent_mode;
|
||||
|
|
@ -893,33 +778,6 @@ namespace DoExport {
|
|||
processor.apply_config(config);
|
||||
processor.enable_stealth_time_estimator(silent_time_estimator_enabled);
|
||||
}
|
||||
#else
|
||||
static void init_gcode_analyzer(const PrintConfig &config, GCodeAnalyzer &analyzer)
|
||||
{
|
||||
// resets analyzer
|
||||
analyzer.reset();
|
||||
|
||||
// send extruder offset data to analyzer
|
||||
GCodeAnalyzer::ExtruderOffsetsMap extruder_offsets;
|
||||
unsigned int num_extruders = static_cast<unsigned int>(config.nozzle_diameter.values.size());
|
||||
for (unsigned int extruder_id = 0; extruder_id < num_extruders; ++ extruder_id)
|
||||
{
|
||||
Vec2d offset = config.extruder_offset.get_at(extruder_id);
|
||||
if (!offset.isApprox(Vec2d::Zero()))
|
||||
extruder_offsets[extruder_id] = offset;
|
||||
}
|
||||
analyzer.set_extruder_offsets(extruder_offsets);
|
||||
|
||||
// tell analyzer about the extrusion axis
|
||||
analyzer.set_extrusion_axis(config.get_extrusion_axis()[0]);
|
||||
|
||||
// send extruders count to analyzer to allow it to detect invalid extruder idxs
|
||||
analyzer.set_extruders_count(num_extruders);
|
||||
|
||||
// tell analyzer about the gcode flavor
|
||||
analyzer.set_gcode_flavor(config.gcode_flavor);
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
static double autospeed_volumetric_limit(const Print &print)
|
||||
{
|
||||
|
|
@ -1043,11 +901,6 @@ namespace DoExport {
|
|||
|
||||
// Fill in print_statistics and return formatted string containing filament statistics to be inserted into G-code comment section.
|
||||
static std::string update_print_stats_and_format_filament_stats(
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
const GCodeTimeEstimator &normal_time_estimator,
|
||||
const GCodeTimeEstimator &silent_time_estimator,
|
||||
const bool silent_time_estimator_enabled,
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
const bool has_wipe_tower,
|
||||
const WipeTowerData &wipe_tower_data,
|
||||
const std::vector<Extruder> &extruders,
|
||||
|
|
@ -1056,13 +909,6 @@ namespace DoExport {
|
|||
std::string filament_stats_string_out;
|
||||
|
||||
print_statistics.clear();
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
print_statistics.estimated_normal_print_time = normal_time_estimator.get_time_dhm/*s*/();
|
||||
print_statistics.estimated_silent_print_time = silent_time_estimator_enabled ? silent_time_estimator.get_time_dhm/*s*/() : "N/A";
|
||||
print_statistics.estimated_normal_custom_gcode_print_times = normal_time_estimator.get_custom_gcode_times_dhm(true);
|
||||
if (silent_time_estimator_enabled)
|
||||
print_statistics.estimated_silent_custom_gcode_print_times = silent_time_estimator.get_custom_gcode_times_dhm(true);
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
print_statistics.total_toolchanges = std::max(0, wipe_tower_data.number_of_toolchanges);
|
||||
if (! extruders.empty()) {
|
||||
std::pair<std::string, unsigned int> out_filament_used_mm ("; filament used [mm] = ", 0);
|
||||
|
|
@ -1153,29 +999,16 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
|
|||
{
|
||||
PROFILE_FUNC();
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// modifies m_silent_time_estimator_enabled
|
||||
DoExport::init_gcode_processor(print.config(), m_processor, m_silent_time_estimator_enabled);
|
||||
#else
|
||||
DoExport::init_time_estimators(print.config(),
|
||||
// modifies the following:
|
||||
m_normal_time_estimator, m_silent_time_estimator, m_silent_time_estimator_enabled);
|
||||
DoExport::init_gcode_analyzer(print.config(), m_analyzer);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// resets analyzer's tracking data
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
m_last_height = 0.0f;
|
||||
m_last_layer_z = 0.0f;
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
m_last_mm3_per_mm = 0.0;
|
||||
m_last_width = 0.0f;
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#else
|
||||
m_last_mm3_per_mm = GCodeAnalyzer::Default_mm3_per_mm;
|
||||
m_last_width = GCodeAnalyzer::Default_Width;
|
||||
m_last_height = GCodeAnalyzer::Default_Height;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// How many times will be change_layer() called?
|
||||
// change_layer() in turn increments the progress bar status.
|
||||
|
|
@ -1266,16 +1099,8 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
|
|||
print.throw_if_canceled();
|
||||
|
||||
// adds tags for time estimators
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
if (print.config().remaining_times.value)
|
||||
_writeln(file, GCodeProcessor::First_Line_M73_Placeholder_Tag);
|
||||
#else
|
||||
if (print.config().remaining_times.value) {
|
||||
_writeln(file, GCodeTimeEstimator::Normal_First_M73_Output_Placeholder_Tag);
|
||||
if (m_silent_time_estimator_enabled)
|
||||
_writeln(file, GCodeTimeEstimator::Silent_First_M73_Output_Placeholder_Tag);
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Prepare the helper object for replacing placeholders in custom G-code and output filename.
|
||||
m_placeholder_parser = print.placeholder_parser();
|
||||
|
|
@ -1380,14 +1205,8 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
|
|||
// Set extruder(s) temperature before and after start G-code.
|
||||
this->_print_first_layer_extruder_temperatures(file, print, start_gcode, initial_extruder_id, false);
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// adds tag for processor
|
||||
_write_format(file, ";%s%s\n", GCodeProcessor::Extrusion_Role_Tag.c_str(), ExtrusionEntity::role_to_string(erCustom).c_str());
|
||||
#else
|
||||
if (m_enable_analyzer)
|
||||
// adds tag for analyzer
|
||||
_write_format(file, ";%s%d\n", GCodeAnalyzer::Extrusion_Role_Tag.c_str(), erCustom);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Write the custom start G-code
|
||||
_writeln(file, start_gcode);
|
||||
|
|
@ -1541,14 +1360,8 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
|
|||
_write(file, this->retract());
|
||||
_write(file, m_writer.set_fan(false));
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// adds tag for processor
|
||||
_write_format(file, ";%s%s\n", GCodeProcessor::Extrusion_Role_Tag.c_str(), ExtrusionEntity::role_to_string(erCustom).c_str());
|
||||
#else
|
||||
if (m_enable_analyzer)
|
||||
// adds tag for analyzer
|
||||
_write_format(file, ";%s%d\n", GCodeAnalyzer::Extrusion_Role_Tag.c_str(), erCustom);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Process filament-specific gcode in extruder order.
|
||||
{
|
||||
|
|
@ -1573,32 +1386,14 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
|
|||
_write(file, m_writer.postamble());
|
||||
|
||||
// adds tags for time estimators
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
if (print.config().remaining_times.value)
|
||||
_writeln(file, GCodeProcessor::Last_Line_M73_Placeholder_Tag);
|
||||
#else
|
||||
if (print.config().remaining_times.value) {
|
||||
_writeln(file, GCodeTimeEstimator::Normal_Last_M73_Output_Placeholder_Tag);
|
||||
if (m_silent_time_estimator_enabled)
|
||||
_writeln(file, GCodeTimeEstimator::Silent_Last_M73_Output_Placeholder_Tag);
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
print.throw_if_canceled();
|
||||
|
||||
// calculates estimated printing time
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
m_normal_time_estimator.calculate_time(false);
|
||||
if (m_silent_time_estimator_enabled)
|
||||
m_silent_time_estimator.calculate_time(false);
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
// Get filament stats.
|
||||
_write(file, DoExport::update_print_stats_and_format_filament_stats(
|
||||
// Const inputs
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
m_normal_time_estimator, m_silent_time_estimator, m_silent_time_estimator_enabled,
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
has_wipe_tower, print.wipe_tower_data(),
|
||||
m_writer.extruders(),
|
||||
// Modifies
|
||||
|
|
@ -1608,13 +1403,7 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
|
|||
_write_format(file, "; total filament cost = %.2lf\n", print.m_print_statistics.total_cost);
|
||||
if (print.m_print_statistics.total_toolchanges > 0)
|
||||
_write_format(file, "; total toolchanges = %i\n", print.m_print_statistics.total_toolchanges);
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
_writeln(file, GCodeProcessor::Estimated_Printing_Time_Placeholder_Tag);
|
||||
#else
|
||||
_write_format(file, "; estimated printing time (normal mode) = %s\n", m_normal_time_estimator.get_time_dhms().c_str());
|
||||
if (m_silent_time_estimator_enabled)
|
||||
_write_format(file, "; estimated printing time (silent mode) = %s\n", m_silent_time_estimator.get_time_dhms().c_str());
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Append full config.
|
||||
_write(file, "\n");
|
||||
|
|
@ -1896,15 +1685,8 @@ namespace ProcessLayer
|
|||
{
|
||||
assert(m600_extruder_before_layer >= 0);
|
||||
// Color Change or Tool Change as Color Change.
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// add tag for processor
|
||||
gcode += ";" + GCodeProcessor::Color_Change_Tag + ",T" + std::to_string(m600_extruder_before_layer) + "\n";
|
||||
#else
|
||||
// add tag for analyzer
|
||||
gcode += "; " + GCodeAnalyzer::Color_Change_Tag + ",T" + std::to_string(m600_extruder_before_layer) + "\n";
|
||||
// add tag for time estimator
|
||||
gcode += "; " + GCodeTimeEstimator::Color_Change_Tag + "\n";
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
if (!single_extruder_printer && m600_extruder_before_layer >= 0 && first_extruder_id != (unsigned)m600_extruder_before_layer
|
||||
// && !MMU1
|
||||
|
|
@ -1923,33 +1705,17 @@ namespace ProcessLayer
|
|||
{
|
||||
if (gcode_type == CustomGCode::PausePrint) // Pause print
|
||||
{
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// add tag for processor
|
||||
gcode += ";" + GCodeProcessor::Pause_Print_Tag + "\n";
|
||||
#else
|
||||
// add tag for analyzer
|
||||
gcode += "; " + GCodeAnalyzer::Pause_Print_Tag + "\n";
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
//! FIXME_in_fw show message during print pause
|
||||
if (!pause_print_msg.empty())
|
||||
gcode += "M117 " + pause_print_msg + "\n";
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
// add tag for time estimator
|
||||
gcode += "; " + GCodeTimeEstimator::Pause_Print_Tag + "\n";
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
gcode += config.pause_print_gcode;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// add tag for processor
|
||||
gcode += ";" + GCodeProcessor::Custom_Code_Tag + "\n";
|
||||
#else
|
||||
// add tag for analyzer
|
||||
gcode += "; " + GCodeAnalyzer::Custom_Code_Tag + "\n";
|
||||
// add tag for time estimator
|
||||
//gcode += "; " + GCodeTimeEstimator::Custom_Code_Tag + "\n";
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
if (gcode_type == CustomGCode::Template) // Template Cistom Gcode
|
||||
gcode += config.template_custom_gcode;
|
||||
else // custom Gcode
|
||||
|
|
@ -2091,7 +1857,6 @@ void GCode::process_layer(
|
|||
|
||||
std::string gcode;
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// add tag for processor
|
||||
gcode += "; " + GCodeProcessor::Layer_Change_Tag + "\n";
|
||||
// export layer z
|
||||
|
|
@ -2105,7 +1870,6 @@ void GCode::process_layer(
|
|||
// update caches
|
||||
m_last_layer_z = static_cast<float>(print_z);
|
||||
m_last_height = height;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Set new layer - this will change Z and force a retraction if retract_layer_change is enabled.
|
||||
if (! print.config().before_layer_gcode.value.empty()) {
|
||||
|
|
@ -2320,15 +2084,9 @@ void GCode::process_layer(
|
|||
m_wipe_tower->tool_change(*this, extruder_id, extruder_id == layer_tools.extruders.back()) :
|
||||
this->set_extruder(extruder_id, print_z);
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// let analyzer tag generator aware of a role type change
|
||||
if (layer_tools.has_wipe_tower && m_wipe_tower)
|
||||
m_last_processor_extrusion_role = erWipeTower;
|
||||
#else
|
||||
// let analyzer tag generator aware of a role type change
|
||||
if (m_enable_analyzer && layer_tools.has_wipe_tower && m_wipe_tower)
|
||||
m_last_analyzer_extrusion_role = erWipeTower;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
if (auto loops_it = skirt_loops_per_extruder.find(extruder_id); loops_it != skirt_loops_per_extruder.end()) {
|
||||
const std::pair<size_t, size_t> loops = loops_it->second;
|
||||
|
|
@ -2432,14 +2190,6 @@ void GCode::process_layer(
|
|||
if (m_cooling_buffer)
|
||||
gcode = m_cooling_buffer->process_layer(gcode, layer.id());
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
// add tag for analyzer
|
||||
if (gcode.find(GCodeAnalyzer::Pause_Print_Tag) != gcode.npos)
|
||||
gcode += "\n; " + GCodeAnalyzer::End_Pause_Print_Or_Custom_Code_Tag + "\n";
|
||||
else if (gcode.find(GCodeAnalyzer::Custom_Code_Tag) != gcode.npos)
|
||||
gcode += "\n; " + GCodeAnalyzer::End_Pause_Print_Or_Custom_Code_Tag + "\n";
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
#ifdef HAS_PRESSURE_EQUALIZER
|
||||
// Apply pressure equalization if enabled;
|
||||
// printf("G-code before filter:\n%s\n", gcode.c_str());
|
||||
|
|
@ -2449,17 +2199,8 @@ void GCode::process_layer(
|
|||
#endif /* HAS_PRESSURE_EQUALIZER */
|
||||
|
||||
_write(file, gcode);
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
BOOST_LOG_TRIVIAL(trace) << "Exported layer " << layer.id() << " print_z " << print_z <<
|
||||
log_memory_info();
|
||||
#else
|
||||
BOOST_LOG_TRIVIAL(trace) << "Exported layer " << layer.id() << " print_z " << print_z <<
|
||||
", time estimator memory: " <<
|
||||
format_memsize_MB(m_normal_time_estimator.memory_used() + (m_silent_time_estimator_enabled ? m_silent_time_estimator.memory_used() : 0)) <<
|
||||
", analyzer memory: " <<
|
||||
format_memsize_MB(m_analyzer.memory_used()) <<
|
||||
log_memory_info();
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
}
|
||||
|
||||
void GCode::apply_print_config(const PrintConfig &print_config)
|
||||
|
|
@ -2790,21 +2531,9 @@ std::string GCode::extrude_support(const ExtrusionEntityCollection &support_fill
|
|||
void GCode::_write(FILE* file, const char *what)
|
||||
{
|
||||
if (what != nullptr) {
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
const char* gcode = what;
|
||||
#else
|
||||
// apply analyzer, if enabled
|
||||
const char* gcode = m_enable_analyzer ? m_analyzer.process_gcode(what).c_str() : what;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
// writes string to file
|
||||
fwrite(gcode, 1, ::strlen(gcode), file);
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
// updates time estimator and gcode lines vector
|
||||
m_normal_time_estimator.add_gcode_block(gcode);
|
||||
if (m_silent_time_estimator_enabled)
|
||||
m_silent_time_estimator.add_gcode_block(gcode);
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -2944,70 +2673,36 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
|
|||
}
|
||||
|
||||
// adds processor tags and updates processor tracking data
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// PrusaMultiMaterial::Writer may generate GCodeProcessor::Height_Tag lines without updating m_last_height
|
||||
// so, if the last role was erWipeTower we force export of GCodeProcessor::Height_Tag lines
|
||||
bool last_was_wipe_tower = (m_last_processor_extrusion_role == erWipeTower);
|
||||
#else
|
||||
if (m_enable_analyzer) {
|
||||
// PrusaMultiMaterial::Writer may generate GCodeAnalyzer::Height_Tag and GCodeAnalyzer::Width_Tag lines without updating m_last_height and m_last_width
|
||||
// so, if the last role was erWipeTower we force export of GCodeAnalyzer::Height_Tag and GCodeAnalyzer::Width_Tag lines
|
||||
bool last_was_wipe_tower = (m_last_analyzer_extrusion_role == erWipeTower);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
char buf[64];
|
||||
char buf[64];
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
if (path.role() != m_last_processor_extrusion_role) {
|
||||
m_last_processor_extrusion_role = path.role();
|
||||
sprintf(buf, ";%s%s\n", GCodeProcessor::Extrusion_Role_Tag.c_str(), ExtrusionEntity::role_to_string(m_last_processor_extrusion_role).c_str());
|
||||
gcode += buf;
|
||||
}
|
||||
if (path.role() != m_last_processor_extrusion_role) {
|
||||
m_last_processor_extrusion_role = path.role();
|
||||
sprintf(buf, ";%s%s\n", GCodeProcessor::Extrusion_Role_Tag.c_str(), ExtrusionEntity::role_to_string(m_last_processor_extrusion_role).c_str());
|
||||
gcode += buf;
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
if (last_was_wipe_tower || (m_last_mm3_per_mm != path.mm3_per_mm)) {
|
||||
m_last_mm3_per_mm = path.mm3_per_mm;
|
||||
sprintf(buf, ";%s%f\n", GCodeProcessor::Mm3_Per_Mm_Tag.c_str(), m_last_mm3_per_mm);
|
||||
gcode += buf;
|
||||
}
|
||||
if (last_was_wipe_tower || (m_last_mm3_per_mm != path.mm3_per_mm)) {
|
||||
m_last_mm3_per_mm = path.mm3_per_mm;
|
||||
sprintf(buf, ";%s%f\n", GCodeProcessor::Mm3_Per_Mm_Tag.c_str(), m_last_mm3_per_mm);
|
||||
gcode += buf;
|
||||
}
|
||||
|
||||
if (last_was_wipe_tower || m_last_width != path.width) {
|
||||
m_last_width = path.width;
|
||||
sprintf(buf, ";%s%g\n", GCodeProcessor::Width_Tag.c_str(), m_last_width);
|
||||
gcode += buf;
|
||||
}
|
||||
if (last_was_wipe_tower || m_last_width != path.width) {
|
||||
m_last_width = path.width;
|
||||
sprintf(buf, ";%s%g\n", GCodeProcessor::Width_Tag.c_str(), m_last_width);
|
||||
gcode += buf;
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
|
||||
if (last_was_wipe_tower || std::abs(m_last_height - path.height) > EPSILON) {
|
||||
m_last_height = path.height;
|
||||
sprintf(buf, ";%s%g\n", GCodeProcessor::Height_Tag.c_str(), m_last_height);
|
||||
gcode += buf;
|
||||
}
|
||||
#else
|
||||
if (path.role() != m_last_analyzer_extrusion_role) {
|
||||
m_last_analyzer_extrusion_role = path.role();
|
||||
sprintf(buf, ";%s%d\n", GCodeAnalyzer::Extrusion_Role_Tag.c_str(), int(m_last_analyzer_extrusion_role));
|
||||
gcode += buf;
|
||||
}
|
||||
|
||||
if (last_was_wipe_tower || (m_last_mm3_per_mm != path.mm3_per_mm)) {
|
||||
m_last_mm3_per_mm = path.mm3_per_mm;
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Mm3_Per_Mm_Tag.c_str(), m_last_mm3_per_mm);
|
||||
gcode += buf;
|
||||
}
|
||||
|
||||
if (last_was_wipe_tower || m_last_width != path.width) {
|
||||
m_last_width = path.width;
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Width_Tag.c_str(), m_last_width);
|
||||
gcode += buf;
|
||||
}
|
||||
|
||||
if (last_was_wipe_tower || m_last_height != path.height) {
|
||||
m_last_height = path.height;
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Height_Tag.c_str(), m_last_height);
|
||||
gcode += buf;
|
||||
}
|
||||
if (last_was_wipe_tower || std::abs(m_last_height - path.height) > EPSILON) {
|
||||
m_last_height = path.height;
|
||||
sprintf(buf, ";%s%g\n", GCodeProcessor::Height_Tag.c_str(), m_last_height);
|
||||
gcode += buf;
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
std::string comment;
|
||||
if (m_enable_cooling_markers) {
|
||||
|
|
|
|||
|
|
@ -14,12 +14,7 @@
|
|||
#include "GCode/ToolOrdering.hpp"
|
||||
#include "GCode/WipeTower.hpp"
|
||||
#include "GCode/SeamPlacer.hpp"
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include "GCode/GCodeProcessor.hpp"
|
||||
#else
|
||||
#include "GCode/Analyzer.hpp"
|
||||
#include "GCodeTimeEstimator.hpp"
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
#include "EdgeGrid.hpp"
|
||||
#include "GCode/ThumbnailData.hpp"
|
||||
|
||||
|
|
@ -34,9 +29,6 @@ namespace Slic3r {
|
|||
|
||||
// Forward declarations.
|
||||
class GCode;
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
class GCodePreviewData;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
namespace { struct Item; }
|
||||
struct PrintInstance;
|
||||
|
|
@ -146,14 +138,12 @@ private:
|
|||
double m_last_wipe_tower_print_z = 0.f;
|
||||
};
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
class ColorPrintColors
|
||||
{
|
||||
static const std::vector<std::string> Colors;
|
||||
public:
|
||||
static const std::vector<std::string>& get() { return Colors; }
|
||||
};
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
class GCode {
|
||||
public:
|
||||
|
|
@ -162,12 +152,7 @@ public:
|
|||
m_enable_loop_clipping(true),
|
||||
m_enable_cooling_markers(false),
|
||||
m_enable_extrusion_role_markers(false),
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
m_last_processor_extrusion_role(erNone),
|
||||
#else
|
||||
m_enable_analyzer(false),
|
||||
m_last_analyzer_extrusion_role(erNone),
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
m_layer_count(0),
|
||||
m_layer_index(-1),
|
||||
m_layer(nullptr),
|
||||
|
|
@ -178,17 +163,8 @@ public:
|
|||
m_last_mm3_per_mm(0.0),
|
||||
m_last_width(0.0f),
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
m_last_mm3_per_mm(GCodeAnalyzer::Default_mm3_per_mm),
|
||||
m_last_width(GCodeAnalyzer::Default_Width),
|
||||
m_last_height(GCodeAnalyzer::Default_Height),
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
m_brim_done(false),
|
||||
m_second_layer_things_done(false),
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
m_normal_time_estimator(GCodeTimeEstimator::Normal),
|
||||
m_silent_time_estimator(GCodeTimeEstimator::Silent),
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
m_silent_time_estimator_enabled(false),
|
||||
m_last_obj_copy(nullptr, Point(std::numeric_limits<coord_t>::max(), std::numeric_limits<coord_t>::max()))
|
||||
{}
|
||||
|
|
@ -196,11 +172,7 @@ public:
|
|||
|
||||
// throws std::runtime_exception on error,
|
||||
// throws CanceledException through print->throw_if_canceled().
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
void do_export(Print* print, const char* path, GCodeProcessor::Result* result = nullptr, ThumbnailsGeneratorCallback thumbnail_cb = nullptr);
|
||||
#else
|
||||
void do_export(Print* print, const char* path, GCodePreviewData* preview_data = nullptr, ThumbnailsGeneratorCallback thumbnail_cb = nullptr);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Exported for the helper classes (OozePrevention, Wipe) and for the Perl binding for unit tests.
|
||||
const Vec2d& origin() const { return m_origin; }
|
||||
|
|
@ -363,16 +335,8 @@ private:
|
|||
// Markers for the Pressure Equalizer to recognize the extrusion type.
|
||||
// The Pressure Equalizer removes the markers from the final G-code.
|
||||
bool m_enable_extrusion_role_markers;
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// Keeps track of the last extrusion role passed to the processor
|
||||
ExtrusionRole m_last_processor_extrusion_role;
|
||||
#else
|
||||
// Enableds the G-code Analyzer.
|
||||
// Extended markers will be added during G-code generation.
|
||||
// The G-code Analyzer will remove these comments from the final G-code.
|
||||
bool m_enable_analyzer;
|
||||
ExtrusionRole m_last_analyzer_extrusion_role;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
// How many times will change_layer() be called?
|
||||
// change_layer() will update the progress bar.
|
||||
unsigned int m_layer_count;
|
||||
|
|
@ -384,7 +348,6 @@ private:
|
|||
double m_volumetric_speed;
|
||||
// Support for the extrusion role markers. Which marker is active?
|
||||
ExtrusionRole m_last_extrusion_role;
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// Support for G-Code Processor
|
||||
float m_last_height{ 0.0f };
|
||||
float m_last_layer_z{ 0.0f };
|
||||
|
|
@ -392,12 +355,6 @@ private:
|
|||
double m_last_mm3_per_mm;
|
||||
float m_last_width{ 0.0f };
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#else
|
||||
// Support for G-Code Analyzer
|
||||
double m_last_mm3_per_mm;
|
||||
float m_last_width;
|
||||
float m_last_height;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
Point m_last_pos;
|
||||
bool m_last_pos_defined;
|
||||
|
|
@ -418,20 +375,10 @@ private:
|
|||
// Index of a last object copy extruded.
|
||||
std::pair<const PrintObject*, Point> m_last_obj_copy;
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
// Time estimators
|
||||
GCodeTimeEstimator m_normal_time_estimator;
|
||||
GCodeTimeEstimator m_silent_time_estimator;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
bool m_silent_time_estimator_enabled;
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// Processor
|
||||
GCodeProcessor m_processor;
|
||||
#else
|
||||
// Analyzer
|
||||
GCodeAnalyzer m_analyzer;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// Write a string into a file.
|
||||
void _write(FILE* file, const std::string& what) { this->_write(file, what.c_str()); }
|
||||
|
|
|
|||
|
|
@ -15,7 +15,6 @@
|
|||
#include <utility>
|
||||
#endif
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include <chrono>
|
||||
|
||||
static const float INCHES_TO_MM = 25.4f;
|
||||
|
|
@ -2228,4 +2227,3 @@ void GCodeProcessor::update_estimated_times_stats()
|
|||
|
||||
} /* namespace Slic3r */
|
||||
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
|
|
|||
|
|
@ -1,7 +1,6 @@
|
|||
#ifndef slic3r_GCodeProcessor_hpp_
|
||||
#define slic3r_GCodeProcessor_hpp_
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCodeReader.hpp"
|
||||
#include "libslic3r/Point.hpp"
|
||||
#include "libslic3r/ExtrusionEntity.hpp"
|
||||
|
|
@ -584,8 +583,6 @@ namespace Slic3r {
|
|||
|
||||
} /* namespace Slic3r */
|
||||
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
#endif /* slic3r_GCodeProcessor_hpp_ */
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,521 +0,0 @@
|
|||
#include "PreviewData.hpp"
|
||||
#include <I18N.hpp>
|
||||
#include "Utils.hpp"
|
||||
|
||||
#include <boost/format.hpp>
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
|
||||
//! macro used to mark string used at localization,
|
||||
#define L(s) (s)
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
std::vector<unsigned char> Color::as_bytes() const
|
||||
{
|
||||
std::vector<unsigned char> ret;
|
||||
for (unsigned int i = 0; i < 4; ++i)
|
||||
{
|
||||
ret.push_back((unsigned char)(255.0f * rgba[i]));
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
GCodePreviewData::Extrusion::Layer::Layer(float z, const Paths& paths)
|
||||
: z(z)
|
||||
, paths(paths)
|
||||
{
|
||||
}
|
||||
|
||||
GCodePreviewData::Travel::Polyline::Polyline(EType type, EDirection direction, float feedrate, unsigned int extruder_id, const Polyline3& polyline)
|
||||
: type(type)
|
||||
, direction(direction)
|
||||
, feedrate(feedrate)
|
||||
, extruder_id(extruder_id)
|
||||
, polyline(polyline)
|
||||
{
|
||||
}
|
||||
|
||||
GCodePreviewData::Range::Range()
|
||||
{
|
||||
reset();
|
||||
}
|
||||
|
||||
void GCodePreviewData::Range::reset()
|
||||
{
|
||||
min_val = FLT_MAX;
|
||||
max_val = -FLT_MAX;
|
||||
}
|
||||
|
||||
bool GCodePreviewData::Range::empty() const
|
||||
{
|
||||
return min_val >= max_val;
|
||||
}
|
||||
|
||||
void GCodePreviewData::Range::update_from(float value)
|
||||
{
|
||||
min_val = std::min(min_val, value);
|
||||
max_val = std::max(max_val, value);
|
||||
}
|
||||
|
||||
void GCodePreviewData::Range::update_from(const RangeBase& other)
|
||||
{
|
||||
min_val = std::min(min_val, other.min());
|
||||
max_val = std::max(max_val, other.max());
|
||||
}
|
||||
|
||||
float GCodePreviewData::RangeBase::step_size() const
|
||||
{
|
||||
return (max() - min()) / static_cast<float>(range_rainbow_colors.size() - 1);
|
||||
}
|
||||
|
||||
Color GCodePreviewData::RangeBase::get_color_at(float value) const
|
||||
{
|
||||
// Input value scaled to the color range
|
||||
float step = step_size();
|
||||
const float global_t = (step != 0.0f) ? std::max(0.0f, value - min()) / step : 0.0f; // lower limit of 0.0f
|
||||
|
||||
constexpr std::size_t color_max_idx = range_rainbow_colors.size() - 1;
|
||||
|
||||
// Compute the two colors just below (low) and above (high) the input value
|
||||
const std::size_t color_low_idx = std::clamp(static_cast<std::size_t>(global_t), std::size_t{ 0 }, color_max_idx);
|
||||
const std::size_t color_high_idx = std::clamp(color_low_idx + 1, std::size_t{ 0 }, color_max_idx);
|
||||
|
||||
// Compute how far the value is between the low and high colors so that they can be interpolated
|
||||
const float local_t = std::min(global_t - static_cast<float>(color_low_idx), 1.0f); // upper limit of 1.0f
|
||||
|
||||
// Interpolate between the low and high colors in RGB space to find exactly which color the input value should get
|
||||
Color ret;
|
||||
for (unsigned int i = 0; i < 4; ++i)
|
||||
{
|
||||
ret.rgba[i] = lerp(range_rainbow_colors[color_low_idx].rgba[i], range_rainbow_colors[color_high_idx].rgba[i], local_t);
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
float GCodePreviewData::Range::min() const
|
||||
{
|
||||
return min_val;
|
||||
}
|
||||
|
||||
float GCodePreviewData::Range::max() const
|
||||
{
|
||||
return max_val;
|
||||
}
|
||||
|
||||
GCodePreviewData::LegendItem::LegendItem(const std::string& text, const Color& color)
|
||||
: text(text)
|
||||
, color(color)
|
||||
{
|
||||
}
|
||||
|
||||
const Color GCodePreviewData::Extrusion::Default_Extrusion_Role_Colors[erCount] =
|
||||
{
|
||||
Color(0.0f, 0.0f, 0.0f, 1.0f), // erNone
|
||||
Color(1.0f, 0.0f, 0.0f, 1.0f), // erPerimeter
|
||||
Color(0.0f, 1.0f, 0.0f, 1.0f), // erExternalPerimeter
|
||||
Color(0.0f, 0.0f, 1.0f, 1.0f), // erOverhangPerimeter
|
||||
Color(1.0f, 1.0f, 0.0f, 1.0f), // erInternalInfill
|
||||
Color(1.0f, 0.0f, 1.0f, 1.0f), // erSolidInfill
|
||||
Color(0.0f, 1.0f, 1.0f, 1.0f), // erTopSolidInfill
|
||||
// Color(1.0f, 0.7f, 0.61f, 1.0f), // erIroning
|
||||
Color(1.0f, 0.55f, 0.41f, 1.0f), // erIroning
|
||||
Color(0.5f, 0.5f, 0.5f, 1.0f), // erBridgeInfill
|
||||
Color(1.0f, 1.0f, 1.0f, 1.0f), // erGapFill
|
||||
Color(0.5f, 0.0f, 0.0f, 1.0f), // erSkirt
|
||||
Color(0.0f, 0.5f, 0.0f, 1.0f), // erSupportMaterial
|
||||
Color(0.0f, 0.0f, 0.5f, 1.0f), // erSupportMaterialInterface
|
||||
Color(0.7f, 0.89f, 0.67f, 1.0f), // erWipeTower
|
||||
Color(1.0f, 1.0f, 0.0f, 1.0f), // erCustom
|
||||
Color(0.0f, 0.0f, 0.0f, 1.0f) // erMixed
|
||||
};
|
||||
|
||||
const GCodePreviewData::Extrusion::EViewType GCodePreviewData::Extrusion::Default_View_Type = GCodePreviewData::Extrusion::FeatureType;
|
||||
|
||||
void GCodePreviewData::Extrusion::set_default()
|
||||
{
|
||||
view_type = Default_View_Type;
|
||||
|
||||
::memcpy((void*)role_colors, (const void*)Default_Extrusion_Role_Colors, erCount * sizeof(Color));
|
||||
|
||||
for (unsigned int i = 0; i < erCount; ++i)
|
||||
role_names[i] = ExtrusionEntity::role_to_string(ExtrusionRole(i));
|
||||
|
||||
role_flags = 0;
|
||||
for (unsigned int i = 0; i < erCount; ++i)
|
||||
role_flags |= 1 << i;
|
||||
}
|
||||
|
||||
bool GCodePreviewData::Extrusion::is_role_flag_set(ExtrusionRole role) const
|
||||
{
|
||||
return is_role_flag_set(role_flags, role);
|
||||
}
|
||||
|
||||
bool GCodePreviewData::Extrusion::is_role_flag_set(unsigned int flags, ExtrusionRole role)
|
||||
{
|
||||
return GCodeAnalyzer::is_valid_extrusion_role(role) && (flags & (1 << (role - erPerimeter))) != 0;
|
||||
}
|
||||
|
||||
size_t GCodePreviewData::Extrusion::memory_used() const
|
||||
{
|
||||
size_t out = sizeof(*this);
|
||||
out += SLIC3R_STDVEC_MEMSIZE(this->layers, Layer);
|
||||
for (const Layer &layer : this->layers) {
|
||||
out += SLIC3R_STDVEC_MEMSIZE(layer.paths, Path);
|
||||
for (const Path &path : layer.paths)
|
||||
out += SLIC3R_STDVEC_MEMSIZE(path.polyline.points, Point);
|
||||
}
|
||||
return out;
|
||||
}
|
||||
|
||||
const float GCodePreviewData::Travel::Default_Width = 0.075f;
|
||||
const float GCodePreviewData::Travel::Default_Height = 0.075f;
|
||||
const Color GCodePreviewData::Travel::Default_Type_Colors[Num_Types] =
|
||||
{
|
||||
Color(0.0f, 0.0f, 0.75f, 1.0f), // Move
|
||||
Color(0.0f, 0.75f, 0.0f, 1.0f), // Extrude
|
||||
Color(0.75f, 0.0f, 0.0f, 1.0f), // Retract
|
||||
};
|
||||
|
||||
void GCodePreviewData::Travel::set_default()
|
||||
{
|
||||
width = Default_Width;
|
||||
height = Default_Height;
|
||||
::memcpy((void*)type_colors, (const void*)Default_Type_Colors, Num_Types * sizeof(Color));
|
||||
color_print_idx = 0;
|
||||
|
||||
is_visible = false;
|
||||
}
|
||||
|
||||
size_t GCodePreviewData::Travel::memory_used() const
|
||||
{
|
||||
size_t out = sizeof(*this);
|
||||
out += SLIC3R_STDVEC_MEMSIZE(this->polylines, Polyline);
|
||||
for (const Polyline &polyline : this->polylines)
|
||||
out += SLIC3R_STDVEC_MEMSIZE(polyline.polyline.points, Vec3crd);
|
||||
return out;
|
||||
}
|
||||
|
||||
const Color GCodePreviewData::Retraction::Default_Color = Color(1.0f, 1.0f, 1.0f, 1.0f);
|
||||
|
||||
GCodePreviewData::Retraction::Position::Position(const Vec3crd& position, float width, float height)
|
||||
: position(position)
|
||||
, width(width)
|
||||
, height(height)
|
||||
{
|
||||
}
|
||||
|
||||
void GCodePreviewData::Retraction::set_default()
|
||||
{
|
||||
color = Default_Color;
|
||||
is_visible = false;
|
||||
}
|
||||
|
||||
size_t GCodePreviewData::Retraction::memory_used() const
|
||||
{
|
||||
return sizeof(*this) + SLIC3R_STDVEC_MEMSIZE(this->positions, Position);
|
||||
}
|
||||
|
||||
void GCodePreviewData::Shell::set_default()
|
||||
{
|
||||
is_visible = false;
|
||||
}
|
||||
|
||||
GCodePreviewData::GCodePreviewData()
|
||||
{
|
||||
set_default();
|
||||
}
|
||||
|
||||
void GCodePreviewData::set_default()
|
||||
{
|
||||
extrusion.set_default();
|
||||
travel.set_default();
|
||||
retraction.set_default();
|
||||
unretraction.set_default();
|
||||
shell.set_default();
|
||||
|
||||
// Configure the color range for feedrate to match the default for travels and to enable extrusions since they are always visible
|
||||
ranges.feedrate.set_mode(FeedrateKind::TRAVEL, travel.is_visible);
|
||||
ranges.feedrate.set_mode(FeedrateKind::EXTRUSION, true);
|
||||
}
|
||||
|
||||
void GCodePreviewData::reset()
|
||||
{
|
||||
ranges.width.reset();
|
||||
ranges.height.reset();
|
||||
ranges.feedrate.reset();
|
||||
ranges.fan_speed.reset();
|
||||
ranges.volumetric_rate.reset();
|
||||
extrusion.layers.clear();
|
||||
travel.polylines.clear();
|
||||
retraction.positions.clear();
|
||||
unretraction.positions.clear();
|
||||
}
|
||||
|
||||
bool GCodePreviewData::empty() const
|
||||
{
|
||||
return extrusion.layers.empty() && travel.polylines.empty() && retraction.positions.empty() && unretraction.positions.empty();
|
||||
}
|
||||
|
||||
Color GCodePreviewData::get_extrusion_role_color(ExtrusionRole role) const
|
||||
{
|
||||
return extrusion.role_colors[role];
|
||||
}
|
||||
|
||||
Color GCodePreviewData::get_height_color(float height) const
|
||||
{
|
||||
return ranges.height.get_color_at(height);
|
||||
}
|
||||
|
||||
Color GCodePreviewData::get_width_color(float width) const
|
||||
{
|
||||
return ranges.width.get_color_at(width);
|
||||
}
|
||||
|
||||
Color GCodePreviewData::get_feedrate_color(float feedrate) const
|
||||
{
|
||||
return ranges.feedrate.get_color_at(feedrate);
|
||||
}
|
||||
|
||||
Color GCodePreviewData::get_fan_speed_color(float fan_speed) const
|
||||
{
|
||||
return ranges.fan_speed.get_color_at(fan_speed);
|
||||
}
|
||||
|
||||
Color GCodePreviewData::get_volumetric_rate_color(float rate) const
|
||||
{
|
||||
return ranges.volumetric_rate.get_color_at(rate);
|
||||
}
|
||||
|
||||
void GCodePreviewData::set_extrusion_role_color(const std::string& role_name, float red, float green, float blue, float alpha)
|
||||
{
|
||||
for (unsigned int i = 0; i < erCount; ++i)
|
||||
{
|
||||
if (role_name == extrusion.role_names[i])
|
||||
{
|
||||
extrusion.role_colors[i] = Color(red, green, blue, alpha);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void GCodePreviewData::set_extrusion_paths_colors(const std::vector<std::string>& colors)
|
||||
{
|
||||
unsigned int size = (unsigned int)colors.size();
|
||||
|
||||
if (size % 2 != 0)
|
||||
return;
|
||||
|
||||
for (unsigned int i = 0; i < size; i += 2)
|
||||
{
|
||||
const std::string& color_str = colors[i + 1];
|
||||
|
||||
if (color_str.size() == 6)
|
||||
{
|
||||
bool valid = true;
|
||||
for (int c = 0; c < 6; ++c)
|
||||
{
|
||||
if (::isxdigit(color_str[c]) == 0)
|
||||
{
|
||||
valid = false;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (valid)
|
||||
{
|
||||
unsigned int color;
|
||||
std::stringstream ss;
|
||||
ss << std::hex << color_str;
|
||||
ss >> color;
|
||||
|
||||
float den = 1.0f / 255.0f;
|
||||
|
||||
float r = (float)((color & 0xFF0000) >> 16) * den;
|
||||
float g = (float)((color & 0x00FF00) >> 8) * den;
|
||||
float b = (float)(color & 0x0000FF) * den;
|
||||
|
||||
this->set_extrusion_role_color(colors[i], r, g, b, 1.0f);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
std::string GCodePreviewData::get_legend_title() const
|
||||
{
|
||||
switch (extrusion.view_type)
|
||||
{
|
||||
case Extrusion::FeatureType:
|
||||
return L("Feature type");
|
||||
case Extrusion::Height:
|
||||
return L("Height (mm)");
|
||||
case Extrusion::Width:
|
||||
return L("Width (mm)");
|
||||
case Extrusion::Feedrate:
|
||||
return L("Speed (mm/s)");
|
||||
case Extrusion::FanSpeed:
|
||||
return L("Fan Speed (%)");
|
||||
case Extrusion::VolumetricRate:
|
||||
return L("Volumetric flow rate (mm³/s)");
|
||||
case Extrusion::Tool:
|
||||
return L("Tool");
|
||||
case Extrusion::ColorPrint:
|
||||
return L("Color Print");
|
||||
case Extrusion::Num_View_Types:
|
||||
break; // just to supress warning about non-handled value
|
||||
}
|
||||
|
||||
return "";
|
||||
}
|
||||
|
||||
GCodePreviewData::LegendItemsList GCodePreviewData::get_legend_items(const std::vector<float>& tool_colors,
|
||||
const std::vector<std::string>& cp_items) const
|
||||
{
|
||||
struct Helper
|
||||
{
|
||||
static void FillListFromRange(LegendItemsList& list, const RangeBase& range, unsigned int decimals, float scale_factor)
|
||||
{
|
||||
list.reserve(range_rainbow_colors.size());
|
||||
|
||||
float step = range.step_size();
|
||||
if (step == 0.0f)
|
||||
{
|
||||
char buf[1024];
|
||||
sprintf(buf, "%.*f", decimals, scale_factor * range.min());
|
||||
list.emplace_back(buf, range_rainbow_colors[0]);
|
||||
}
|
||||
else
|
||||
{
|
||||
for (int i = static_cast<int>(range_rainbow_colors.size()) - 1; i >= 0; --i)
|
||||
{
|
||||
char buf[1024];
|
||||
sprintf(buf, "%.*f", decimals, scale_factor * (range.min() + (float)i * step));
|
||||
list.emplace_back(buf, range_rainbow_colors[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
LegendItemsList items;
|
||||
|
||||
switch (extrusion.view_type)
|
||||
{
|
||||
case Extrusion::FeatureType:
|
||||
{
|
||||
ExtrusionRole first_valid = erPerimeter;
|
||||
ExtrusionRole last_valid = erCustom;
|
||||
|
||||
items.reserve(last_valid - first_valid + 1);
|
||||
for (unsigned int i = (unsigned int)first_valid; i <= (unsigned int)last_valid; ++i)
|
||||
{
|
||||
items.emplace_back(Slic3r::I18N::translate(extrusion.role_names[i]), extrusion.role_colors[i]);
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
case Extrusion::Height:
|
||||
{
|
||||
Helper::FillListFromRange(items, ranges.height, 3, 1.0f);
|
||||
break;
|
||||
}
|
||||
case Extrusion::Width:
|
||||
{
|
||||
Helper::FillListFromRange(items, ranges.width, 3, 1.0f);
|
||||
break;
|
||||
}
|
||||
case Extrusion::Feedrate:
|
||||
{
|
||||
Helper::FillListFromRange(items, ranges.feedrate, 1, 1.0f);
|
||||
break;
|
||||
}
|
||||
case Extrusion::FanSpeed:
|
||||
{
|
||||
Helper::FillListFromRange(items, ranges.fan_speed, 0, 1.0f);
|
||||
break;
|
||||
}
|
||||
case Extrusion::VolumetricRate:
|
||||
{
|
||||
Helper::FillListFromRange(items, ranges.volumetric_rate, 3, 1.0f);
|
||||
break;
|
||||
}
|
||||
case Extrusion::Tool:
|
||||
{
|
||||
unsigned int tools_colors_count = (unsigned int)tool_colors.size() / 4;
|
||||
items.reserve(tools_colors_count);
|
||||
for (unsigned int i = 0; i < tools_colors_count; ++i)
|
||||
{
|
||||
Color color;
|
||||
::memcpy((void*)color.rgba.data(), (const void*)(tool_colors.data() + i * 4), 4 * sizeof(float));
|
||||
items.emplace_back((boost::format(Slic3r::I18N::translate(L("Extruder %d"))) % (i + 1)).str(), color);
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
case Extrusion::ColorPrint:
|
||||
{
|
||||
const int color_cnt = (int)tool_colors.size()/4;
|
||||
const auto color_print_cnt = (int)cp_items.size();
|
||||
if (color_print_cnt == 1) // means "Default print color"
|
||||
{
|
||||
Color color;
|
||||
::memcpy((void*)color.rgba.data(), (const void*)(tool_colors.data()), 4 * sizeof(float));
|
||||
|
||||
items.emplace_back(cp_items[0], color);
|
||||
break;
|
||||
}
|
||||
|
||||
if (color_cnt != color_print_cnt)
|
||||
break;
|
||||
|
||||
for (int i = 0 ; i < color_print_cnt; ++i)
|
||||
{
|
||||
Color color;
|
||||
::memcpy((void*)color.rgba.data(), (const void*)(tool_colors.data() + i * 4), 4 * sizeof(float));
|
||||
|
||||
items.emplace_back(cp_items[i], color);
|
||||
}
|
||||
break;
|
||||
}
|
||||
case Extrusion::Num_View_Types:
|
||||
break; // just to supress warning about non-handled value
|
||||
}
|
||||
|
||||
return items;
|
||||
}
|
||||
|
||||
// Return an estimate of the memory consumed by the time estimator.
|
||||
size_t GCodePreviewData::memory_used() const
|
||||
{
|
||||
return
|
||||
this->extrusion.memory_used() +
|
||||
this->travel.memory_used() +
|
||||
this->retraction.memory_used() +
|
||||
this->unretraction.memory_used() +
|
||||
sizeof(shell) + sizeof(ranges);
|
||||
}
|
||||
|
||||
const std::vector<std::string>& GCodePreviewData::ColorPrintColors()
|
||||
{
|
||||
static std::vector<std::string> color_print = {"#C0392B", "#E67E22", "#F1C40F", "#27AE60", "#1ABC9C", "#2980B9", "#9B59B6"};
|
||||
return color_print;
|
||||
}
|
||||
|
||||
Color operator + (const Color& c1, const Color& c2)
|
||||
{
|
||||
return Color(std::clamp(c1.rgba[0] + c2.rgba[0], 0.0f, 1.0f),
|
||||
std::clamp(c1.rgba[1] + c2.rgba[1], 0.0f, 1.0f),
|
||||
std::clamp(c1.rgba[2] + c2.rgba[2], 0.0f, 1.0f),
|
||||
std::clamp(c1.rgba[3] + c2.rgba[3], 0.0f, 1.0f));
|
||||
}
|
||||
|
||||
Color operator * (float f, const Color& color)
|
||||
{
|
||||
return Color(std::clamp(f * color.rgba[0], 0.0f, 1.0f),
|
||||
std::clamp(f * color.rgba[1], 0.0f, 1.0f),
|
||||
std::clamp(f * color.rgba[2], 0.0f, 1.0f),
|
||||
std::clamp(f * color.rgba[3], 0.0f, 1.0f));
|
||||
}
|
||||
|
||||
} // namespace Slic3r
|
||||
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
|
@ -1,398 +0,0 @@
|
|||
#ifndef slic3r_GCode_PreviewData_hpp_
|
||||
#define slic3r_GCode_PreviewData_hpp_
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
|
||||
#include "../libslic3r.h"
|
||||
#include "../ExtrusionEntity.hpp"
|
||||
#include "../Point.hpp"
|
||||
|
||||
#include <tuple>
|
||||
#include <array>
|
||||
#include <vector>
|
||||
#include <bitset>
|
||||
#include <cstddef>
|
||||
#include <algorithm>
|
||||
#include <string>
|
||||
|
||||
#include <float.h>
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
// Represents an RGBA color
|
||||
struct Color
|
||||
{
|
||||
std::array<float,4> rgba;
|
||||
|
||||
Color(const float *argba)
|
||||
{
|
||||
memcpy(this->rgba.data(), argba, sizeof(float) * 4);
|
||||
}
|
||||
constexpr Color(float r = 1.f, float g = 1.f, float b = 1.f, float a = 1.f) : rgba{r,g,b,a}
|
||||
{
|
||||
// Intentionally empty
|
||||
}
|
||||
|
||||
std::vector<unsigned char> as_bytes() const;
|
||||
};
|
||||
Color operator + (const Color& c1, const Color& c2);
|
||||
Color operator * (float f, const Color& color);
|
||||
|
||||
// Default colors for Ranges
|
||||
constexpr std::array<Color, 10> range_rainbow_colors{
|
||||
Color{0.043f, 0.173f, 0.478f, 1.0f},
|
||||
Color{0.075f, 0.349f, 0.522f, 1.0f},
|
||||
Color{0.110f, 0.533f, 0.569f, 1.0f},
|
||||
Color{0.016f, 0.839f, 0.059f, 1.0f},
|
||||
Color{0.667f, 0.949f, 0.000f, 1.0f},
|
||||
Color{0.988f, 0.975f, 0.012f, 1.0f},
|
||||
Color{0.961f, 0.808f, 0.039f, 1.0f},
|
||||
Color{0.890f, 0.533f, 0.125f, 1.0f},
|
||||
Color{0.820f, 0.408f, 0.188f, 1.0f},
|
||||
Color{0.761f, 0.322f, 0.235f, 1.0f}};
|
||||
|
||||
class GCodePreviewData
|
||||
{
|
||||
public:
|
||||
|
||||
// Color mapping to convert a float into a smooth rainbow of 10 colors.
|
||||
class RangeBase
|
||||
{
|
||||
public:
|
||||
virtual void reset() = 0;
|
||||
virtual bool empty() const = 0;
|
||||
virtual float min() const = 0;
|
||||
virtual float max() const = 0;
|
||||
|
||||
// Gets the step size using min(), max() and colors
|
||||
float step_size() const;
|
||||
|
||||
// Gets the color at a value using colors, min(), and max()
|
||||
Color get_color_at(float value) const;
|
||||
};
|
||||
|
||||
// Color mapping converting a float in a range between a min and a max into a smooth rainbow of 10 colors.
|
||||
class Range : public RangeBase
|
||||
{
|
||||
public:
|
||||
Range();
|
||||
|
||||
// RangeBase Overrides
|
||||
void reset() override;
|
||||
bool empty() const override;
|
||||
float min() const override;
|
||||
float max() const override;
|
||||
|
||||
// Range-specific methods
|
||||
void update_from(float value);
|
||||
void update_from(const RangeBase& other);
|
||||
|
||||
private:
|
||||
float min_val;
|
||||
float max_val;
|
||||
};
|
||||
|
||||
// Like Range, but stores multiple ranges internally that are used depending on mode.
|
||||
// Template param EnumRangeType must be an enum with values for each type of range that needs to be tracked in this MultiRange.
|
||||
// The last enum value should be num_values. The numerical values of all enum values should range from 0 to num_values.
|
||||
template <typename EnumRangeType>
|
||||
class MultiRange : public RangeBase
|
||||
{
|
||||
public:
|
||||
void reset() override
|
||||
{
|
||||
bounds = decltype(bounds){};
|
||||
}
|
||||
|
||||
bool empty() const override
|
||||
{
|
||||
for (std::size_t i = 0; i < bounds.size(); ++i)
|
||||
{
|
||||
if (bounds[i].min != bounds[i].max)
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
float min() const override
|
||||
{
|
||||
float min = FLT_MAX;
|
||||
for (std::size_t i = 0; i < bounds.size(); ++i)
|
||||
{
|
||||
// Only use bounds[i] if the current mode includes it
|
||||
if (mode.test(i))
|
||||
{
|
||||
min = std::min(min, bounds[i].min);
|
||||
}
|
||||
}
|
||||
return min;
|
||||
}
|
||||
|
||||
float max() const override
|
||||
{
|
||||
float max = -FLT_MAX;
|
||||
for (std::size_t i = 0; i < bounds.size(); ++i)
|
||||
{
|
||||
// Only use bounds[i] if the current mode includes it
|
||||
if (mode.test(i))
|
||||
{
|
||||
max = std::max(max, bounds[i].max);
|
||||
}
|
||||
}
|
||||
return max;
|
||||
}
|
||||
|
||||
void update_from(const float value, EnumRangeType range_type_value)
|
||||
{
|
||||
bounds[static_cast<std::size_t>(range_type_value)].update_from(value);
|
||||
}
|
||||
|
||||
void update_from(const MultiRange& other)
|
||||
{
|
||||
for (std::size_t i = 0; i < bounds.size(); ++i)
|
||||
{
|
||||
bounds[i].update_from(other.bounds[i]);
|
||||
}
|
||||
}
|
||||
|
||||
void set_mode(const EnumRangeType range_type_value, const bool enable)
|
||||
{
|
||||
mode.set(static_cast<std::size_t>(range_type_value), enable);
|
||||
}
|
||||
|
||||
private:
|
||||
// Interval bounds
|
||||
struct Bounds
|
||||
{
|
||||
float min{FLT_MAX};
|
||||
float max{-FLT_MAX};
|
||||
void update_from(const float value)
|
||||
{
|
||||
min = std::min(min, value);
|
||||
max = std::max(max, value);
|
||||
}
|
||||
void update_from(const Bounds other_bounds)
|
||||
{
|
||||
min = std::min(min, other_bounds.min);
|
||||
max = std::max(max, other_bounds.max);
|
||||
}
|
||||
};
|
||||
|
||||
std::array<Bounds, static_cast<std::size_t>(EnumRangeType::num_values)> bounds;
|
||||
std::bitset<static_cast<std::size_t>(EnumRangeType::num_values)> mode;
|
||||
};
|
||||
|
||||
// Enum distinguishing different kinds of feedrate data
|
||||
enum class FeedrateKind
|
||||
{
|
||||
EXTRUSION = 0, // values must go from 0 up to num_values
|
||||
TRAVEL,
|
||||
num_values //must be last in the list of values
|
||||
};
|
||||
|
||||
struct Ranges
|
||||
{
|
||||
// Color mapping by layer height.
|
||||
Range height;
|
||||
// Color mapping by extrusion width.
|
||||
Range width;
|
||||
// Color mapping by feedrate.
|
||||
MultiRange<FeedrateKind> feedrate;
|
||||
// Color mapping by fan speed.
|
||||
Range fan_speed;
|
||||
// Color mapping by volumetric extrusion rate.
|
||||
Range volumetric_rate;
|
||||
};
|
||||
|
||||
struct LegendItem
|
||||
{
|
||||
std::string text;
|
||||
Color color;
|
||||
|
||||
LegendItem(const std::string& text, const Color& color);
|
||||
};
|
||||
|
||||
typedef std::vector<LegendItem> LegendItemsList;
|
||||
|
||||
struct Extrusion
|
||||
{
|
||||
enum EViewType : unsigned char
|
||||
{
|
||||
FeatureType,
|
||||
Height,
|
||||
Width,
|
||||
Feedrate,
|
||||
FanSpeed,
|
||||
VolumetricRate,
|
||||
Tool,
|
||||
ColorPrint,
|
||||
Num_View_Types
|
||||
};
|
||||
|
||||
static const Color Default_Extrusion_Role_Colors[erCount];
|
||||
static const std::string Default_Extrusion_Role_Names[erCount];
|
||||
static const EViewType Default_View_Type;
|
||||
|
||||
class Path
|
||||
{
|
||||
public:
|
||||
Polyline polyline;
|
||||
ExtrusionRole extrusion_role;
|
||||
// Volumetric velocity. mm^3 of plastic per mm of linear head motion. Used by the G-code generator.
|
||||
float mm3_per_mm;
|
||||
// Width of the extrusion, used for visualization purposes.
|
||||
float width;
|
||||
// Height of the extrusion, used for visualization purposes.
|
||||
float height;
|
||||
// Feedrate of the extrusion, used for visualization purposes.
|
||||
float feedrate;
|
||||
// Id of the extruder, used for visualization purposes.
|
||||
uint32_t extruder_id;
|
||||
// Id of the color, used for visualization purposes in the color printing case.
|
||||
uint32_t cp_color_id;
|
||||
// Fan speed for the extrusion, used for visualization purposes.
|
||||
float fan_speed;
|
||||
};
|
||||
using Paths = std::vector<Path>;
|
||||
|
||||
struct Layer
|
||||
{
|
||||
float z;
|
||||
Paths paths;
|
||||
|
||||
Layer(float z, const Paths& paths);
|
||||
};
|
||||
|
||||
typedef std::vector<Layer> LayersList;
|
||||
|
||||
EViewType view_type;
|
||||
Color role_colors[erCount];
|
||||
std::string role_names[erCount];
|
||||
LayersList layers;
|
||||
unsigned int role_flags;
|
||||
|
||||
void set_default();
|
||||
bool is_role_flag_set(ExtrusionRole role) const;
|
||||
|
||||
// Return an estimate of the memory consumed by the time estimator.
|
||||
size_t memory_used() const;
|
||||
|
||||
static bool is_role_flag_set(unsigned int flags, ExtrusionRole role);
|
||||
};
|
||||
|
||||
struct Travel
|
||||
{
|
||||
enum EType : unsigned char
|
||||
{
|
||||
Move,
|
||||
Extrude,
|
||||
Retract,
|
||||
Num_Types
|
||||
};
|
||||
|
||||
static const float Default_Width;
|
||||
static const float Default_Height;
|
||||
static const Color Default_Type_Colors[Num_Types];
|
||||
|
||||
struct Polyline
|
||||
{
|
||||
enum EDirection
|
||||
{
|
||||
Vertical,
|
||||
Generic,
|
||||
Num_Directions
|
||||
};
|
||||
|
||||
EType type;
|
||||
EDirection direction;
|
||||
float feedrate;
|
||||
unsigned int extruder_id;
|
||||
Polyline3 polyline;
|
||||
|
||||
Polyline(EType type, EDirection direction, float feedrate, unsigned int extruder_id, const Polyline3& polyline);
|
||||
};
|
||||
|
||||
typedef std::vector<Polyline> PolylinesList;
|
||||
|
||||
PolylinesList polylines;
|
||||
float width;
|
||||
float height;
|
||||
Color type_colors[Num_Types];
|
||||
bool is_visible;
|
||||
size_t color_print_idx;
|
||||
|
||||
void set_default();
|
||||
|
||||
// Return an estimate of the memory consumed by the time estimator.
|
||||
size_t memory_used() const;
|
||||
};
|
||||
|
||||
struct Retraction
|
||||
{
|
||||
static const Color Default_Color;
|
||||
|
||||
struct Position
|
||||
{
|
||||
Vec3crd position;
|
||||
float width;
|
||||
float height;
|
||||
|
||||
Position(const Vec3crd& position, float width, float height);
|
||||
};
|
||||
|
||||
typedef std::vector<Position> PositionsList;
|
||||
|
||||
PositionsList positions;
|
||||
Color color;
|
||||
bool is_visible;
|
||||
|
||||
void set_default();
|
||||
|
||||
// Return an estimate of the memory consumed by the time estimator.
|
||||
size_t memory_used() const;
|
||||
};
|
||||
|
||||
struct Shell
|
||||
{
|
||||
bool is_visible;
|
||||
|
||||
void set_default();
|
||||
};
|
||||
|
||||
Extrusion extrusion;
|
||||
Travel travel;
|
||||
Retraction retraction;
|
||||
Retraction unretraction;
|
||||
Shell shell;
|
||||
Ranges ranges;
|
||||
|
||||
GCodePreviewData();
|
||||
|
||||
void set_default();
|
||||
void reset();
|
||||
bool empty() const;
|
||||
|
||||
Color get_extrusion_role_color(ExtrusionRole role) const;
|
||||
Color get_height_color(float height) const;
|
||||
Color get_width_color(float width) const;
|
||||
Color get_feedrate_color(float feedrate) const;
|
||||
Color get_fan_speed_color(float fan_speed) const;
|
||||
Color get_volumetric_rate_color(float rate) const;
|
||||
|
||||
void set_extrusion_role_color(const std::string& role_name, float red, float green, float blue, float alpha);
|
||||
void set_extrusion_paths_colors(const std::vector<std::string>& colors);
|
||||
|
||||
std::string get_legend_title() const;
|
||||
LegendItemsList get_legend_items(const std::vector<float>& tool_colors, const std::vector<std::string>& cp_items) const;
|
||||
|
||||
// Return an estimate of the memory consumed by the time estimator.
|
||||
size_t memory_used() const;
|
||||
|
||||
static const std::vector<std::string>& ColorPrintColors();
|
||||
};
|
||||
|
||||
} // namespace Slic3r
|
||||
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
#endif /* slic3r_GCode_PreviewData_hpp_ */
|
||||
|
|
@ -5,11 +5,7 @@
|
|||
#include <vector>
|
||||
#include <numeric>
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include "GCodeProcessor.hpp"
|
||||
#else
|
||||
#include "Analyzer.hpp"
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
#include "BoundingBox.hpp"
|
||||
|
||||
|
||||
|
|
@ -38,25 +34,18 @@ public:
|
|||
m_extrusion_flow(0.f),
|
||||
m_preview_suppressed(false),
|
||||
m_elapsed_time(0.f),
|
||||
#if !ENABLE_GCODE_VIEWER || ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
m_default_analyzer_line_width(line_width),
|
||||
#endif // !ENABLE_GCODE_VIEWER || ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
m_gcode_flavor(flavor),
|
||||
m_filpar(filament_parameters)
|
||||
{
|
||||
// adds tag for analyzer:
|
||||
char buf[64];
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
sprintf(buf, ";%s%f\n", GCodeProcessor::Height_Tag.c_str(), m_layer_height); // don't rely on GCodeAnalyzer knowing the layer height - it knows nothing at priming
|
||||
m_gcode += buf;
|
||||
sprintf(buf, ";%s%s\n", GCodeProcessor::Extrusion_Role_Tag.c_str(), ExtrusionEntity::role_to_string(erWipeTower).c_str());
|
||||
m_gcode += buf;
|
||||
#else
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Height_Tag.c_str(), m_layer_height); // don't rely on GCodeAnalyzer knowing the layer height - it knows nothing at priming
|
||||
m_gcode += buf;
|
||||
sprintf(buf, ";%s%d\n", GCodeAnalyzer::Extrusion_Role_Tag.c_str(), erWipeTower);
|
||||
m_gcode += buf;
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
change_analyzer_line_width(line_width);
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
|
|
@ -80,26 +69,6 @@ public:
|
|||
m_gcode += buf;
|
||||
return *this;
|
||||
}
|
||||
#else
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
WipeTowerWriter& change_analyzer_line_width(float line_width) {
|
||||
// adds tag for analyzer:
|
||||
char buf[64];
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Width_Tag.c_str(), line_width);
|
||||
m_gcode += buf;
|
||||
return *this;
|
||||
}
|
||||
|
||||
WipeTowerWriter& change_analyzer_mm3_per_mm(float len, float e) {
|
||||
static const float area = float(M_PI) * 1.75f * 1.75f / 4.f;
|
||||
float mm3_per_mm = (len == 0.f ? 0.f : area * e / len);
|
||||
// adds tag for analyzer:
|
||||
char buf[64];
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Mm3_Per_Mm_Tag.c_str(), mm3_per_mm);
|
||||
m_gcode += buf;
|
||||
return *this;
|
||||
}
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
|
||||
WipeTowerWriter& set_initial_position(const Vec2f &pos, float width = 0.f, float depth = 0.f, float internal_angle = 0.f) {
|
||||
|
|
@ -135,13 +104,13 @@ public:
|
|||
// Suppress / resume G-code preview in Slic3r. Slic3r will have difficulty to differentiate the various
|
||||
// filament loading and cooling moves from normal extrusion moves. Therefore the writer
|
||||
// is asked to suppres output of some lines, which look like extrusions.
|
||||
#if !ENABLE_GCODE_VIEWER || ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
WipeTowerWriter& suppress_preview() { change_analyzer_line_width(0.f); m_preview_suppressed = true; return *this; }
|
||||
WipeTowerWriter& resume_preview() { change_analyzer_line_width(m_default_analyzer_line_width); m_preview_suppressed = false; return *this; }
|
||||
#else
|
||||
WipeTowerWriter& suppress_preview() { m_preview_suppressed = true; return *this; }
|
||||
WipeTowerWriter& resume_preview() { m_preview_suppressed = false; return *this; }
|
||||
#endif // !ENABLE_GCODE_VIEWER || ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
|
||||
WipeTowerWriter& feedrate(float f)
|
||||
{
|
||||
|
|
@ -180,10 +149,6 @@ public:
|
|||
if (! m_preview_suppressed && e > 0.f && len > 0.f) {
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
change_analyzer_mm3_per_mm(len, e);
|
||||
#else
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
change_analyzer_mm3_per_mm(len, e);
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
// Width of a squished extrusion, corrected for the roundings of the squished extrusions.
|
||||
// This is left zero if it is a travel move.
|
||||
|
|
@ -463,9 +428,9 @@ private:
|
|||
float m_wipe_tower_depth = 0.f;
|
||||
unsigned m_last_fan_speed = 0;
|
||||
int current_temp = -1;
|
||||
#if !ENABLE_GCODE_VIEWER || ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
const float m_default_analyzer_line_width;
|
||||
#endif // !ENABLE_GCODE_VIEWER || ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
|
||||
float m_used_filament_length = 0.f;
|
||||
GCodeFlavor m_gcode_flavor;
|
||||
const std::vector<WipeTower::FilamentParameters>& m_filpar;
|
||||
|
|
|
|||
|
|
@ -1,9 +1,7 @@
|
|||
#include "GCodeReader.hpp"
|
||||
#include <boost/algorithm/string/classification.hpp>
|
||||
#include <boost/algorithm/string/split.hpp>
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include <boost/nowide/fstream.hpp>
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
#include <fstream>
|
||||
#include <iostream>
|
||||
#include <iomanip>
|
||||
|
|
@ -116,18 +114,10 @@ void GCodeReader::update_coordinates(GCodeLine &gline, std::pair<const char*, co
|
|||
|
||||
void GCodeReader::parse_file(const std::string &file, callback_t callback)
|
||||
{
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
boost::nowide::ifstream f(file);
|
||||
#else
|
||||
std::ifstream f(file);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
std::string line;
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
m_parsing_file = true;
|
||||
while (m_parsing_file && std::getline(f, line))
|
||||
#else
|
||||
while (std::getline(f, line))
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
this->parse_line(line, callback);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -108,9 +108,7 @@ public:
|
|||
{ GCodeLine gline; this->parse_line(line.c_str(), gline, callback); }
|
||||
|
||||
void parse_file(const std::string &file, callback_t callback);
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
void quit_parsing_file() { m_parsing_file = false; }
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
float& x() { return m_position[X]; }
|
||||
float x() const { return m_position[X]; }
|
||||
|
|
@ -149,9 +147,7 @@ private:
|
|||
char m_extrusion_axis;
|
||||
float m_position[NUM_AXES];
|
||||
bool m_verbose;
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
bool m_parsing_file{ false };
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
};
|
||||
|
||||
} /* namespace Slic3r */
|
||||
|
|
|
|||
|
|
@ -22,9 +22,6 @@
|
|||
#include "SVG.hpp"
|
||||
#include <Eigen/Dense>
|
||||
#include "GCodeWriter.hpp"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "GCode/PreviewData.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
|
|
|
|||
|
|
@ -1836,7 +1836,6 @@ namespace PresetUtils {
|
|||
return out;
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string system_printer_bed_model(const Preset& preset)
|
||||
{
|
||||
std::string out;
|
||||
|
|
@ -1854,7 +1853,6 @@ namespace PresetUtils {
|
|||
out = Slic3r::resources_dir() + "/profiles/" + preset.vendor->id + "/" + pm->bed_texture;
|
||||
return out;
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
} // namespace PresetUtils
|
||||
|
||||
} // namespace Slic3r
|
||||
|
|
|
|||
|
|
@ -537,10 +537,8 @@ public:
|
|||
namespace PresetUtils {
|
||||
// PrinterModel of a system profile, from which this preset is derived, or null if it is not derived from a system profile.
|
||||
const VendorProfile::PrinterModel* system_printer_model(const Preset &preset);
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string system_printer_bed_model(const Preset& preset);
|
||||
std::string system_printer_bed_texture(const Preset& preset);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
} // namespace PresetUtils
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1661,21 +1661,13 @@ void Print::process()
|
|||
// The export_gcode may die for various reasons (fails to process output_filename_format,
|
||||
// write error into the G-code, cannot execute post-processing scripts).
|
||||
// It is up to the caller to show an error message.
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string Print::export_gcode(const std::string& path_template, GCodeProcessor::Result* result, ThumbnailsGeneratorCallback thumbnail_cb)
|
||||
#else
|
||||
std::string Print::export_gcode(const std::string& path_template, GCodePreviewData* preview_data, ThumbnailsGeneratorCallback thumbnail_cb)
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
{
|
||||
// output everything to a G-code file
|
||||
// The following call may die if the output_filename_format template substitution fails.
|
||||
std::string path = this->output_filepath(path_template);
|
||||
std::string message;
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
if (!path.empty() && result == nullptr) {
|
||||
#else
|
||||
if (! path.empty() && preview_data == nullptr) {
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
// Only show the path if preview_data is not set -> running from command line.
|
||||
message = L("Exporting G-code");
|
||||
message += " to ";
|
||||
|
|
@ -1686,11 +1678,7 @@ std::string Print::export_gcode(const std::string& path_template, GCodePreviewDa
|
|||
|
||||
// The following line may die for multiple reasons.
|
||||
GCode gcode;
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
gcode.do_export(this, path.c_str(), result, thumbnail_cb);
|
||||
#else
|
||||
gcode.do_export(this, path.c_str(), preview_data, thumbnail_cb);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
return path.c_str();
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -11,9 +11,7 @@
|
|||
#include "GCode/ToolOrdering.hpp"
|
||||
#include "GCode/WipeTower.hpp"
|
||||
#include "GCode/ThumbnailData.hpp"
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
#include "GCode/GCodeProcessor.hpp"
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
#include "libslic3r.h"
|
||||
|
||||
|
|
@ -23,9 +21,6 @@ class Print;
|
|||
class PrintObject;
|
||||
class ModelObject;
|
||||
class GCode;
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
class GCodePreviewData;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
enum class SlicingMode : uint32_t;
|
||||
class Layer;
|
||||
class SupportLayer;
|
||||
|
|
@ -312,10 +307,6 @@ struct PrintStatistics
|
|||
PrintStatistics() { clear(); }
|
||||
std::string estimated_normal_print_time;
|
||||
std::string estimated_silent_print_time;
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
std::vector<std::pair<CustomGCode::Type, std::string>> estimated_normal_custom_gcode_print_times;
|
||||
std::vector<std::pair<CustomGCode::Type, std::string>> estimated_silent_custom_gcode_print_times;
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
double total_used_filament;
|
||||
double total_extruded_volume;
|
||||
double total_cost;
|
||||
|
|
@ -333,12 +324,6 @@ struct PrintStatistics
|
|||
std::string finalize_output_path(const std::string &path_in) const;
|
||||
|
||||
void clear() {
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
estimated_normal_print_time.clear();
|
||||
estimated_silent_print_time.clear();
|
||||
estimated_normal_custom_gcode_print_times.clear();
|
||||
estimated_silent_custom_gcode_print_times.clear();
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
total_used_filament = 0.;
|
||||
total_extruded_volume = 0.;
|
||||
total_cost = 0.;
|
||||
|
|
@ -380,11 +365,7 @@ public:
|
|||
void process() override;
|
||||
// Exports G-code into a file name based on the path_template, returns the file path of the generated G-code file.
|
||||
// If preview_data is not null, the preview_data is filled in for the G-code visualization (not used by the command line Slic3r).
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string export_gcode(const std::string& path_template, GCodeProcessor::Result* result, ThumbnailsGeneratorCallback thumbnail_cb = nullptr);
|
||||
#else
|
||||
std::string export_gcode(const std::string& path_template, GCodePreviewData* preview_data, ThumbnailsGeneratorCallback thumbnail_cb = nullptr);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// methods for handling state
|
||||
bool is_step_done(PrintStep step) const { return Inherited::is_step_done(step); }
|
||||
|
|
|
|||
|
|
@ -1214,9 +1214,9 @@ void PrintConfigDef::init_fff_params()
|
|||
def->enum_values.push_back("emit_to_gcode");
|
||||
def->enum_values.push_back("time_estimate_only");
|
||||
def->enum_values.push_back("ignore");
|
||||
def->enum_labels.push_back("Emit to G-code");
|
||||
def->enum_labels.push_back("Use for time estimate");
|
||||
def->enum_labels.push_back("Ignore");
|
||||
def->enum_labels.push_back(L("Emit to G-code"));
|
||||
def->enum_labels.push_back(L("Use for time estimate"));
|
||||
def->enum_labels.push_back(L("Ignore"));
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionEnum<MachineLimitsUsage>(MachineLimitsUsage::EmitToGCode));
|
||||
|
||||
|
|
|
|||
|
|
@ -110,30 +110,13 @@ std::string string_printf(const char *format, ...);
|
|||
// to be placed at the top of Slic3r generated files.
|
||||
std::string header_slic3r_generated();
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
// Standard "generated by PrusaGCodeViewer version xxx timestamp xxx" header string,
|
||||
// to be placed at the top of Slic3r generated files.
|
||||
std::string header_gcodeviewer_generated();
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
// getpid platform wrapper
|
||||
extern unsigned get_current_pid();
|
||||
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
template <typename Real>
|
||||
Real round_nearest(Real value, unsigned int decimals)
|
||||
{
|
||||
Real res = (Real)0;
|
||||
if (decimals == 0)
|
||||
res = ::round(value);
|
||||
else {
|
||||
Real power = ::pow((Real)10, (int)decimals);
|
||||
res = ::round(value * power + (Real)0.5) / power;
|
||||
}
|
||||
return res;
|
||||
}
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
|
||||
// Compute the next highest power of 2 of 32-bit v
|
||||
// http://graphics.stanford.edu/~seander/bithacks.html
|
||||
inline uint16_t next_highest_power_of_2(uint16_t v)
|
||||
|
|
|
|||
|
|
@ -614,12 +614,10 @@ std::string header_slic3r_generated()
|
|||
return std::string("generated by " SLIC3R_APP_NAME " " SLIC3R_VERSION " on " ) + Utils::utc_timestamp();
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
std::string header_gcodeviewer_generated()
|
||||
{
|
||||
return std::string("generated by " GCODEVIEWER_APP_NAME " " SLIC3R_VERSION " on ") + Utils::utc_timestamp();
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
|
||||
unsigned get_current_pid()
|
||||
{
|
||||
|
|
|
|||
|
|
@ -16,15 +16,9 @@
|
|||
#include "libslic3r/ExtrusionEntity.hpp"
|
||||
#include "libslic3r/ExtrusionEntityCollection.hpp"
|
||||
#include "libslic3r/Geometry.hpp"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/Print.hpp"
|
||||
#include "libslic3r/SLAPrint.hpp"
|
||||
#include "libslic3r/Slicing.hpp"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/Analyzer.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#include "slic3r/GUI/BitmapCache.hpp"
|
||||
#include "libslic3r/Format/STL.hpp"
|
||||
#include "libslic3r/Utils.hpp"
|
||||
|
|
|
|||
|
|
@ -19,9 +19,6 @@
|
|||
#include "libslic3r/SLAPrint.hpp"
|
||||
#include "libslic3r/Utils.hpp"
|
||||
#include "libslic3r/GCode/PostProcessor.hpp"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/Format/SL1.hpp"
|
||||
#include "libslic3r/Thread.hpp"
|
||||
#include "libslic3r/libslic3r.h"
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@
|
|||
#include <wx/debug.h>
|
||||
|
||||
#include "libslic3r/Utils.hpp"
|
||||
#include "libslic3r/Config.hpp"
|
||||
#include "GUI.hpp"
|
||||
#include "GUI_App.hpp"
|
||||
#include "GUI_Utils.hpp"
|
||||
|
|
@ -273,8 +274,8 @@ PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxSt
|
|||
const size_t odd_items = titles.size() % cols;
|
||||
|
||||
for (size_t i = 0; i < titles.size() - odd_items; i += cols) {
|
||||
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(titles[j], 0, wxBOTTOM, 3); }
|
||||
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(bitmaps[j], 0, wxBOTTOM, 20); }
|
||||
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(titles[j], 0, wxBOTTOM, 3); }
|
||||
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(variants_panels[j]); }
|
||||
|
||||
// Add separator space to multiliners
|
||||
|
|
@ -285,10 +286,10 @@ PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxSt
|
|||
if (odd_items > 0) {
|
||||
const size_t rem = titles.size() - odd_items;
|
||||
|
||||
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(titles[i], 0, wxBOTTOM, 3); }
|
||||
for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
|
||||
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(bitmaps[i], 0, wxBOTTOM, 20); }
|
||||
for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
|
||||
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(titles[i], 0, wxBOTTOM, 3); }
|
||||
for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
|
||||
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(variants_panels[i]); }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -4,7 +4,6 @@
|
|||
#include "libslic3r/GCode.hpp"
|
||||
#else
|
||||
#include "wxExtensions.hpp"
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
#include "GUI.hpp"
|
||||
#include "GUI_App.hpp"
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ ExtruderSequenceDialog::ExtruderSequenceDialog(const DoubleSlider::ExtrudersSequ
|
|||
|
||||
auto option_sizer = new wxBoxSizer(wxVERTICAL);
|
||||
|
||||
auto intervals_box = new wxStaticBox(this, wxID_ANY, _(L("Set extruder change for every"))+ " : ");
|
||||
auto intervals_box = new wxStaticBox(this, wxID_ANY, _(L("Set extruder change for every"))+ ": ");
|
||||
auto intervals_box_sizer = new wxStaticBoxSizer(intervals_box, wxVERTICAL);
|
||||
|
||||
m_intervals_grid_sizer = new wxFlexGridSizer(3, 5, em);
|
||||
|
|
@ -114,26 +114,26 @@ ExtruderSequenceDialog::ExtruderSequenceDialog(const DoubleSlider::ExtrudersSequ
|
|||
rb_by_mm->SetValue(true);
|
||||
});
|
||||
|
||||
m_interval_by_mm->Bind(wxEVT_KILL_FOCUS, [this, change_value](wxFocusEvent& event)
|
||||
m_interval_by_mm->Bind(wxEVT_KILL_FOCUS, [change_value](wxFocusEvent& event)
|
||||
{
|
||||
change_value();
|
||||
event.Skip();
|
||||
});
|
||||
|
||||
m_interval_by_mm->Bind(wxEVT_TEXT_ENTER, [this, change_value](wxEvent&)
|
||||
m_interval_by_mm->Bind(wxEVT_TEXT_ENTER, [change_value](wxEvent&)
|
||||
{
|
||||
change_value();
|
||||
});
|
||||
|
||||
m_intervals_grid_sizer->Add(rb_by_mm, 0, wxALIGN_CENTER_VERTICAL);
|
||||
m_intervals_grid_sizer->Add(m_interval_by_mm,0, wxALIGN_CENTER_VERTICAL);
|
||||
m_intervals_grid_sizer->Add(m_interval_by_mm, 0, wxALIGN_CENTER_VERTICAL);
|
||||
m_intervals_grid_sizer->Add(st_by_mm,0, wxALIGN_CENTER_VERTICAL);
|
||||
|
||||
intervals_box_sizer->Add(m_intervals_grid_sizer, 0, wxLEFT, em);
|
||||
option_sizer->Add(intervals_box_sizer, 0, wxEXPAND);
|
||||
|
||||
|
||||
auto extruders_box = new wxStaticBox(this, wxID_ANY, _(L("Set extruder(tool) sequence"))+ " : ");
|
||||
auto extruders_box = new wxStaticBox(this, wxID_ANY, _(L("Set extruder(tool) sequence"))+ ": ");
|
||||
auto extruders_box_sizer = new wxStaticBoxSizer(extruders_box, wxVERTICAL);
|
||||
|
||||
m_extruders_grid_sizer = new wxFlexGridSizer(3, 5, em);
|
||||
|
|
|
|||
|
|
@ -693,6 +693,11 @@ void SpinCtrl::BUILD() {
|
|||
|
||||
auto temp = new wxSpinCtrl(m_parent, wxID_ANY, text_value, wxDefaultPosition, size,
|
||||
0|wxTE_PROCESS_ENTER, min_val, max_val, default_value);
|
||||
#ifdef __WXGTK3__
|
||||
wxSize best_sz = temp->GetBestSize();
|
||||
if (best_sz.x > size.x)
|
||||
temp->SetSize(wxSize(size.x + 2 * best_sz.y, best_sz.y));
|
||||
#endif //__WXGTK3__
|
||||
temp->SetFont(Slic3r::GUI::wxGetApp().normal_font());
|
||||
if (!wxOSX) temp->SetBackgroundStyle(wxBG_STYLE_PAINT);
|
||||
|
||||
|
|
|
|||
|
|
@ -5,9 +5,6 @@
|
|||
#include "polypartition.h"
|
||||
#include "libslic3r/ClipperUtils.hpp"
|
||||
#include "libslic3r/PrintConfig.hpp"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/ThumbnailData.hpp"
|
||||
#include "libslic3r/Geometry.hpp"
|
||||
#include "libslic3r/ExtrusionEntity.hpp"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,4 @@
|
|||
#include "libslic3r/libslic3r.h"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#include "GUI_Preview.hpp"
|
||||
#include "GUI_App.hpp"
|
||||
#include "GUI.hpp"
|
||||
|
|
|
|||
|
|
@ -126,7 +126,7 @@ void GLGizmoFdmSupports::on_render_input_window(float x, float y, float bottom_l
|
|||
|
||||
m_imgui->text("");
|
||||
|
||||
if (m_imgui->button("Autoset by angle...")) {
|
||||
if (m_imgui->button(_L("Autoset by angle") + "...")) {
|
||||
m_setting_angle = true;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -720,7 +720,7 @@ void ImGuiWrapper::search_list(const ImVec2& size_, bool (*items_getter)(int, co
|
|||
// The press on Esc key invokes editing of InputText (removes last changes)
|
||||
// So we should save previous value...
|
||||
std::string str = search_str;
|
||||
ImGui::InputTextEx("", NULL, search_str, 20, search_size, ImGuiInputTextFlags_AutoSelectAll, NULL, NULL);
|
||||
ImGui::InputTextEx("", NULL, search_str, 40, search_size, ImGuiInputTextFlags_AutoSelectAll, NULL, NULL);
|
||||
edited = ImGui::IsItemEdited();
|
||||
if (edited)
|
||||
hovered_id = 0;
|
||||
|
|
@ -798,6 +798,8 @@ void ImGuiWrapper::search_list(const ImVec2& size_, bool (*items_getter)(int, co
|
|||
}
|
||||
};
|
||||
|
||||
ImGui::AlignTextToFramePadding();
|
||||
|
||||
// add checkboxes for show/hide Categories and Groups
|
||||
text(_L("Use for search")+":");
|
||||
check_box(_L("Category"), view_params.category);
|
||||
|
|
|
|||
|
|
@ -173,9 +173,9 @@ wxPoint OG_CustomCtrl::get_pos(const Line& line, Field* field_in/* = nullptr*/)
|
|||
_CTX(option.label, "Layers") : _(option.label);
|
||||
label += ":";
|
||||
|
||||
wxPaintDC dc(this);
|
||||
dc.SetFont(m_font);
|
||||
h_pos += dc.GetMultiLineTextExtent(label).x + m_h_gap;
|
||||
wxCoord label_w, label_h;
|
||||
GetTextExtent(label, &label_w, &label_h, 0, 0, &m_font);
|
||||
h_pos += label_w + 1 + m_h_gap;
|
||||
}
|
||||
h_pos += 3 * blinking_button_width;
|
||||
|
||||
|
|
@ -205,12 +205,6 @@ wxPoint OG_CustomCtrl::get_pos(const Line& line, Field* field_in/* = nullptr*/)
|
|||
|
||||
void OG_CustomCtrl::OnPaint(wxPaintEvent&)
|
||||
{
|
||||
#ifdef _WIN32
|
||||
SetBackgroundColour(wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOW));
|
||||
#else
|
||||
SetBackgroundColour(GetParent()->GetBackgroundColour());
|
||||
#endif // _WIN32
|
||||
|
||||
// case, when custom controll is destroyed but doesn't deleted from the evet loop
|
||||
if(!this->opt_group->custom_ctrl)
|
||||
return;
|
||||
|
|
@ -425,12 +419,6 @@ void OG_CustomCtrl::CtrlLine::msw_rescale()
|
|||
height = label_sz.y * (label_sz.GetWidth() > int(ctrl->opt_group->label_width * ctrl->m_em_unit) ? 2 : 1) + ctrl->m_v_gap;
|
||||
}
|
||||
|
||||
if (og_line.get_options().front().opt.full_width) {
|
||||
Field* field = ctrl->opt_group->get_field(og_line.get_options().front().opt_id);
|
||||
if (field->getWindow())
|
||||
field->getWindow()->SetSize(wxSize(3 * Field::def_width_wider() * ctrl->m_em_unit, -1));
|
||||
}
|
||||
|
||||
correct_items_positions();
|
||||
}
|
||||
|
||||
|
|
@ -509,7 +497,10 @@ void OG_CustomCtrl::CtrlLine::render(wxDC& dc, wxCoord v_pos)
|
|||
option_set.front().side_widget == nullptr && og_line.get_extra_widgets().size() == 0)
|
||||
{
|
||||
if (field && field->undo_to_sys_bitmap())
|
||||
draw_act_bmps(dc, wxPoint(h_pos, v_pos), field->undo_to_sys_bitmap()->bmp(), field->undo_bitmap()->bmp(), field->blink());
|
||||
h_pos = draw_act_bmps(dc, wxPoint(h_pos, v_pos), field->undo_to_sys_bitmap()->bmp(), field->undo_bitmap()->bmp(), field->blink()) + ctrl->m_h_gap;
|
||||
// update width for full_width fields
|
||||
if (option_set.front().opt.full_width && field->getWindow())
|
||||
field->getWindow()->SetSize(ctrl->GetSize().x - h_pos, -1);
|
||||
return;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -115,10 +115,15 @@ void ObjectDataViewModelNode::set_action_and_extruder_icons()
|
|||
m_type & (itVolume | itLayer) ? "cog" : /*m_type & itInstance*/ "set_separate_obj";
|
||||
m_action_icon = create_scaled_bitmap(m_action_icon_name); // FIXME: pass window ptr
|
||||
|
||||
// set extruder bitmap
|
||||
set_extruder_icon();
|
||||
}
|
||||
|
||||
void ObjectDataViewModelNode::set_extruder_icon()
|
||||
{
|
||||
if (m_type & itInstance)
|
||||
return; // don't set colored bitmap for Instance
|
||||
|
||||
// set extruder bitmap
|
||||
int extruder_idx = atoi(m_extruder.c_str());
|
||||
if (extruder_idx > 0) --extruder_idx;
|
||||
m_extruder_bmp = get_extruder_color_icon(extruder_idx);
|
||||
|
|
@ -180,6 +185,8 @@ void ObjectDataViewModelNode::msw_rescale()
|
|||
|
||||
if (!m_opt_categories.empty())
|
||||
update_settings_digest_bitmaps();
|
||||
|
||||
set_extruder_icon();
|
||||
}
|
||||
|
||||
bool ObjectDataViewModelNode::SetValue(const wxVariant& variant, unsigned col)
|
||||
|
|
|
|||
|
|
@ -209,8 +209,10 @@ public:
|
|||
return true;
|
||||
}
|
||||
|
||||
// Set action icons for node
|
||||
// Set action and extruder(if any exist) icons for node
|
||||
void set_action_and_extruder_icons();
|
||||
// set extruder icon for node
|
||||
void set_extruder_icon();
|
||||
// Set printable icon for node
|
||||
void set_printable_icon(PrintIndicator printable);
|
||||
|
||||
|
|
|
|||
|
|
@ -296,11 +296,7 @@ void OptionsGroup::activate_line(Line& line)
|
|||
const auto& option = option_set.front();
|
||||
const auto& field = build_field(option);
|
||||
|
||||
if (custom_ctrl) {
|
||||
if (is_window_field(field) && option.opt.full_width)
|
||||
field->getWindow()->SetSize(wxSize(3 * Field::def_width_wider() * wxGetApp().em_unit(), -1));
|
||||
}
|
||||
else {
|
||||
if (!custom_ctrl) {
|
||||
if (is_window_field(field))
|
||||
sizer->Add(field->getWindow(), option.opt.full_width ? 1 : 0,
|
||||
wxBOTTOM | wxTOP | (option.opt.full_width ? wxEXPAND : wxALIGN_CENTER_VERTICAL), (wxOSX || !staticbox) ? 0 : 2);
|
||||
|
|
|
|||
|
|
@ -269,6 +269,8 @@ void PhysicalPrinterDialog::build_printhost_settings(ConfigOptionsGroup* m_optgr
|
|||
m_optgroup->m_on_change = [this](t_config_option_key opt_key, boost::any value) {
|
||||
if (opt_key == "host_type" || opt_key == "printhost_authorization_type")
|
||||
this->update();
|
||||
if (opt_key == "print_host")
|
||||
this->update_printhost_buttons();
|
||||
};
|
||||
|
||||
m_optgroup->append_single_option_line("host_type");
|
||||
|
|
@ -413,6 +415,23 @@ void PhysicalPrinterDialog::build_printhost_settings(ConfigOptionsGroup* m_optgr
|
|||
|
||||
m_optgroup->activate();
|
||||
|
||||
Field* printhost_field = m_optgroup->get_field("print_host");
|
||||
if (printhost_field)
|
||||
{
|
||||
wxTextCtrl* temp = dynamic_cast<wxTextCtrl*>(printhost_field->getWindow());
|
||||
if (temp)
|
||||
temp->Bind(wxEVT_TEXT, ([this, printhost_field, temp](wxEvent& e)
|
||||
{
|
||||
#ifndef __WXGTK__
|
||||
e.Skip();
|
||||
temp->GetToolTip()->Enable(true);
|
||||
#endif // __WXGTK__
|
||||
TextCtrl* field = dynamic_cast<TextCtrl*>(printhost_field);
|
||||
if (field)
|
||||
field->propagate_value();
|
||||
}), temp->GetId());
|
||||
}
|
||||
|
||||
// Always fill in the "printhost_port" combo box from the config and select it.
|
||||
{
|
||||
Choice* choice = dynamic_cast<Choice*>(m_optgroup->get_field("printhost_port"));
|
||||
|
|
@ -423,6 +442,13 @@ void PhysicalPrinterDialog::build_printhost_settings(ConfigOptionsGroup* m_optgr
|
|||
update();
|
||||
}
|
||||
|
||||
void PhysicalPrinterDialog::update_printhost_buttons()
|
||||
{
|
||||
std::unique_ptr<PrintHost> host(PrintHost::get_print_host(m_config));
|
||||
m_printhost_test_btn->Enable(!m_config->opt_string("print_host").empty() && host->can_test());
|
||||
m_printhost_browse_btn->Enable(host->has_auto_discovery());
|
||||
}
|
||||
|
||||
void PhysicalPrinterDialog::update()
|
||||
{
|
||||
m_optgroup->reload_config();
|
||||
|
|
@ -455,9 +481,7 @@ void PhysicalPrinterDialog::update()
|
|||
m_optgroup->show_field("printhost_port", supports_multiple_printers);
|
||||
m_printhost_port_browse_btn->Show(supports_multiple_printers);
|
||||
|
||||
std::unique_ptr<PrintHost> host(PrintHost::get_print_host(m_config));
|
||||
m_printhost_test_btn->Enable(!m_config->opt_string("print_host").empty() && host->can_test());
|
||||
m_printhost_browse_btn->Enable(host->has_auto_discovery());
|
||||
update_printhost_buttons();
|
||||
|
||||
this->SetSize(this->GetBestSize());
|
||||
this->Layout();
|
||||
|
|
|
|||
|
|
@ -86,6 +86,7 @@ public:
|
|||
~PhysicalPrinterDialog();
|
||||
|
||||
void update();
|
||||
void update_printhost_buttons();
|
||||
void update_printers();
|
||||
wxString get_printer_name();
|
||||
void update_full_printer_names();
|
||||
|
|
|
|||
|
|
@ -32,9 +32,6 @@
|
|||
#include "libslic3r/Format/STL.hpp"
|
||||
#include "libslic3r/Format/AMF.hpp"
|
||||
#include "libslic3r/Format/3mf.hpp"
|
||||
#if !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
#endif // !ENABLE_GCODE_VIEWER
|
||||
#include "libslic3r/GCode/ThumbnailData.hpp"
|
||||
#include "libslic3r/Model.hpp"
|
||||
#include "libslic3r/SLA/Hollowing.hpp"
|
||||
|
|
@ -3563,7 +3560,7 @@ bool Plater::priv::warnings_dialog()
|
|||
{
|
||||
if (current_warnings.empty())
|
||||
return true;
|
||||
std::string text = _u8L("There are active warnings concerning sliced models:\n");
|
||||
std::string text = _u8L("There are active warnings concerning sliced models:") + "\n";
|
||||
bool empt = true;
|
||||
for (auto const& it : current_warnings) {
|
||||
int next_n = it.first.message.find_first_of('\n', 0);
|
||||
|
|
|
|||
|
|
@ -734,7 +734,7 @@ void UnsavedChangesDialog::show_info_line(Action action, std::string preset_name
|
|||
if (action == Action::Undef)
|
||||
text = _L("Some fields are too long to fit. Right mouse click reveals the full text.");
|
||||
else if (action == Action::Discard)
|
||||
text = _L("All modified options will be reverted.");
|
||||
text = _L("All settings changes will be discarded.");
|
||||
else {
|
||||
if (preset_name.empty())
|
||||
text = action == Action::Save ? _L("Save the selected options.") : _L("Transfer the selected settings to the newly selected preset.");
|
||||
|
|
|
|||
|
|
@ -244,11 +244,7 @@ std::string gcode(Print & print)
|
|||
boost::filesystem::path temp = boost::filesystem::unique_path();
|
||||
print.set_status_silent();
|
||||
print.process();
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
print.export_gcode(temp.string(), nullptr, nullptr);
|
||||
#else
|
||||
print.export_gcode(temp.string(), nullptr);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
std::ifstream t(temp.string());
|
||||
std::string str((std::istreambuf_iterator<char>(t)), std::istreambuf_iterator<char>());
|
||||
boost::nowide::remove(temp.string().c_str());
|
||||
|
|
|
|||
|
|
@ -50,12 +50,8 @@ SCENARIO("Model construction", "[Model]") {
|
|||
print.apply(model, config);
|
||||
print.process();
|
||||
boost::filesystem::path temp = boost::filesystem::unique_path();
|
||||
#if ENABLE_GCODE_VIEWER
|
||||
print.export_gcode(temp.string(), nullptr, nullptr);
|
||||
#else
|
||||
print.export_gcode(temp.string(), nullptr);
|
||||
#endif // ENABLE_GCODE_VIEWER
|
||||
REQUIRE(boost::filesystem::exists(temp));
|
||||
print.export_gcode(temp.string(), nullptr, nullptr);
|
||||
REQUIRE(boost::filesystem::exists(temp));
|
||||
REQUIRE(boost::filesystem::is_regular_file(temp));
|
||||
REQUIRE(boost::filesystem::file_size(temp) > 0);
|
||||
boost::nowide::remove(temp.string().c_str());
|
||||
|
|
|
|||
|
|
@ -4,7 +4,6 @@
|
|||
#include <xsinit.h>
|
||||
#include "libslic3r/GCode.hpp"
|
||||
#include "libslic3r/GCode/CoolingBuffer.hpp"
|
||||
#include "libslic3r/GCode/PreviewData.hpp"
|
||||
%}
|
||||
|
||||
%name{Slic3r::GCode::CoolingBuffer} class CoolingBuffer {
|
||||
|
|
|
|||
Loading…
Reference in a new issue