New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618

README.md

@@ -353,6 +353,7 @@ The author of the Silk icon set is Mark James.
         --perimeter-extruder
                             Extruder to use for perimeters (1+, default: 1)
         --infill-extruder   Extruder to use for infill (1+, default: 1)
+        --solid-infill-extruder   Extruder to use for solid infill (1+, default: 1)
         --support-material-extruder
                             Extruder to use for support material (1+, default: 1)
         --support-material-interface-extruder

lib/Slic3r/Fill.pm

@@ -225,28 +225,32 @@ sub make_fill {
         my $mm3_per_mm = $flow->mm3_per_mm;
         
         # save into layer
-        push @fills, my $collection = Slic3r::ExtrusionPath::Collection->new;
+        {
-        $collection->no_sort($params->{no_sort});
+            my $role = $is_bridge ? EXTR_ROLE_BRIDGE
+                : $is_solid ? (($surface->surface_type == S_TYPE_TOP) ? EXTR_ROLE_TOPSOLIDFILL : EXTR_ROLE_SOLIDFILL)
+                : EXTR_ROLE_FILL;
     
+            my $extrusion_height = $is_bridge ? $flow->width : $h;
+            
+            push @fills, my $collection = Slic3r::ExtrusionPath::Collection->new($role);
+            $collection->no_sort($params->{no_sort});
             $collection->append(
                 map Slic3r::ExtrusionPath->new(
                     polyline    => $_,
-                role => ($is_bridge
+                    role        => $role,
-                        ? EXTR_ROLE_BRIDGE
-                        : $is_solid
-                            ? (($surface->surface_type == S_TYPE_TOP) ? EXTR_ROLE_TOPSOLIDFILL : EXTR_ROLE_SOLIDFILL)
-                            : EXTR_ROLE_FILL),
                     mm3_per_mm  => $mm3_per_mm,
                     width       => $flow->width,
-                height      => ($is_bridge ? $flow->width : $h),
+                    height      => $extrusion_height,
                 ), @polylines,
             );
+        }
+        
         push @fills_ordering_points, $polylines[0]->first_point;
     }
     
     # add thin fill regions
     foreach my $thin_fill (@{$layerm->thin_fills}) {
-        push @fills, Slic3r::ExtrusionPath::Collection->new($thin_fill);
+        push @fills, Slic3r::ExtrusionPath::Collection->new($thin_fill->role, $thin_fill);
         push @fills_ordering_points, $thin_fill->first_point;
     }
     

lib/Slic3r/GCode.pm

@@ -256,10 +256,10 @@ sub _extrude_path {
             $acceleration = $self->config->first_layer_acceleration;
         } elsif ($self->config->perimeter_acceleration && $path->is_perimeter) {
             $acceleration = $self->config->perimeter_acceleration;
-        } elsif ($self->config->infill_acceleration && $path->is_fill) {
-            $acceleration = $self->config->infill_acceleration;
         } elsif ($self->config->bridge_acceleration && $path->is_bridge) {
             $acceleration = $self->config->bridge_acceleration;
+        } elsif ($self->config->infill_acceleration && $path->is_infill) {
+            $acceleration = $self->config->infill_acceleration;
         } else {
             $acceleration = $self->config->default_acceleration;
         }

lib/Slic3r/GUI/Tab.pm

@@ -454,7 +454,8 @@ sub build {
         complete_objects extruder_clearance_radius extruder_clearance_height
         gcode_comments output_filename_format
         post_process
-        perimeter_extruder infill_extruder support_material_extruder support_material_interface_extruder
+        perimeter_extruder infill_extruder solid_infill_extruder
+        support_material_extruder support_material_interface_extruder
         ooze_prevention standby_temperature_delta
         interface_shells
         extrusion_width first_layer_extrusion_width perimeter_extrusion_width 
@@ -648,6 +649,7 @@ sub build {
             my $optgroup = $page->new_optgroup('Extruders');
             $optgroup->append_single_option_line('perimeter_extruder');
             $optgroup->append_single_option_line('infill_extruder');
+            $optgroup->append_single_option_line('solid_infill_extruder');
             $optgroup->append_single_option_line('support_material_extruder');
             $optgroup->append_single_option_line('support_material_interface_extruder');
         }

lib/Slic3r/Layer/Region.pm

@@ -246,7 +246,7 @@ sub make_perimeters {
         my ($polynodes, $depth, $is_contour) = @_;
         
         # convert all polynodes to ExtrusionLoop objects
-        my $collection = Slic3r::ExtrusionPath::Collection->new;
+        my $collection = Slic3r::ExtrusionPath::Collection->new(EXTR_ROLE_PERIMETER);  # temporary collection
         my @children = ();
         foreach my $polynode (@$polynodes) {
             my $polygon = ($polynode->{outer} // $polynode->{hole})->clone;
@@ -303,7 +303,7 @@ sub make_perimeters {
                 # (clone because the collection gets DESTROY'ed)
                 # We allow polyline reversal because Clipper may have randomly
                 # reversed polylines during clipping.
-                my $collection = Slic3r::ExtrusionPath::Collection->new(@paths);
+                my $collection = Slic3r::ExtrusionPath::Collection->new(EXTR_ROLE_PERIMETER, @paths); # temporary collection
                 @paths = map $_->clone, @{$collection->chained_path(0)};
             } else {
                 push @paths, Slic3r::ExtrusionPath->new(

lib/Slic3r/Print/GCode.pm

@@ -380,54 +380,87 @@ sub process_layer {
             }
         }
         
-        # tweak region ordering to save toolchanges
+        # We now define a strategy for building perimeters and fills. The separation 
-        my @region_ids = 0 .. ($self->print->region_count-1);
+        # between regions doesn't matter in terms of printing order, as we follow 
-        if ($self->_gcodegen->writer->multiple_extruders) {
+        # another logic instead:
-            my $last_extruder_id = $self->_gcodegen->writer->extruder->id;
+        # - we group all extrusions by extruder so that we minimize toolchanges
-            my $best_region_id = first { $self->print->regions->[$_]->config->perimeter_extruder-1 == $last_extruder_id } @region_ids;
+        # - we start from the last used extruder
-            @region_ids = ($best_region_id, grep $_ != $best_region_id, @region_ids) if $best_region_id;
+        # - for each extruder, we group extrusions by island
-        }
+        # - for each island, we extrude perimeters first, unless user set the infill_first
+        #   option
         
-        foreach my $region_id (@region_ids) {
+        # group extrusions by extruder and then by island
+        my %by_extruder = ();  # extruder_id => [ { perimeters => \@perimeters, infill => \@infill } ]
+        
+        foreach my $region_id (0..($self->print->region_count-1)) {
             my $layerm = $layer->regions->[$region_id] or next;
-            my $region = $self->print->regions->[$region_id];
+            my $region = $self->print->get_region($region_id);
-            $self->_gcodegen->config->apply_region_config($region->config);
             
-            # group extrusions by island
+            # process perimeters
-            my @perimeters_by_island = map [], 0..$#{$layer->slices};   # slice idx => @perimeters
+            {
-            my @infill_by_island     = map [], 0..$#{$layer->slices};   # slice idx => @fills
+                my $extruder_id = $region->config->perimeter_extruder-1;
-            
+                foreach my $perimeter (@{$layerm->perimeters}) {
-            # NOTE: we assume $layer->slices was already ordered with chained_path()!
+                    # init by_extruder item only if we actually use the extruder
-            
+                    $by_extruder{$extruder_id} //= [];
-            PERIMETER: foreach my $perimeter (@{$layerm->perimeters}) {
-                for my $i (0 .. $#{$layer->slices}-1) {
-                    if ($layer->slices->[$i]->contour->contains_point($perimeter->first_point)) {
-                        push @{ $perimeters_by_island[$i] }, $perimeter;
-                        next PERIMETER;
-                    }
-                }
-                push @{ $perimeters_by_island[-1] }, $perimeter; # optimization
-            }
-            FILL: foreach my $fill (@{$layerm->fills}) {
-                for my $i (0 .. $#{$layer->slices}-1) {
-                    if ($layer->slices->[$i]->contour->contains_point($fill->first_point)) {
-                        push @{ $infill_by_island[$i] }, $fill;
-                        next FILL;
-                    }
-                }
-                push @{ $infill_by_island[-1] }, $fill; # optimization
-            }
                     
+                    # $perimeter is an ExtrusionLoop or ExtrusionPath object
                     for my $i (0 .. $#{$layer->slices}) {
-                # give priority to infill if we were already using its extruder and it wouldn't
+                        if ($i == $#{$layer->slices}
-                # be good for perimeters
+                            || $layer->slices->[$i]->contour->contains_point($perimeter->first_point)) {
-                if ($self->print->config->infill_first
+                            $by_extruder{$extruder_id}[$i] //= { perimeters => {} };
-                    || ($self->_gcodegen->writer->multiple_extruders && $region->config->infill_extruder-1 == $self->_gcodegen->writer->extruder->id && $region->config->infill_extruder != $region->config->perimeter_extruder)) {
+                            $by_extruder{$extruder_id}[$i]{perimeters}{$region_id} //= [];
-                    $gcode .= $self->_extrude_infill($infill_by_island[$i], $region);
+                            push @{ $by_extruder{$extruder_id}[$i]{perimeters}{$region_id} }, $perimeter;
-                    $gcode .= $self->_extrude_perimeters($perimeters_by_island[$i], $region);
+                            last;
+                        }
+                    }
+                }
+            }
+            
+            # process infill
+            {
+                foreach my $fill (@{$layerm->fills}) {
+                    # init by_extruder item only if we actually use the extruder
+                    my $extruder_id = $fill->[0]->is_solid_infill
+                        ? $region->config->solid_infill_extruder-1
+                        : $region->config->infill_extruder-1;
+                    
+                    $by_extruder{$extruder_id} //= [];
+                    
+                    # $fill is an ExtrusionPath::Collection object
+                    for my $i (0 .. $#{$layer->slices}) {
+                        if ($i == $#{$layer->slices}
+                            || $layer->slices->[$i]->contour->contains_point($fill->first_point)) {
+                            $by_extruder{$extruder_id}[$i] //= { infill => {} };
+                            $by_extruder{$extruder_id}[$i]{infill}{$region_id} //= [];
+                            push @{ $by_extruder{$extruder_id}[$i]{infill}{$region_id} }, $fill;
+                            last;
+                        }
+                    }
+                }
+            }
+        }
+        
+        # tweak extruder ordering to save toolchanges
+        my @extruders = sort keys %by_extruder;
+        if (@extruders > 1) {
+            my $last_extruder_id = $self->_gcodegen->writer->extruder->id;
+            if (exists $by_extruder{$last_extruder_id}) {
+                @extruders = (
+                    $last_extruder_id,
+                    grep $_ != $last_extruder_id, @extruders,
+                );
+            }
+        }
+        
+        foreach my $extruder_id (@extruders) {
+            $gcode .= $self->_gcodegen->set_extruder($extruder_id);
+            foreach my $island (@{ $by_extruder{$extruder_id} }) {
+                if ($self->print->config->infill_first) {
+                    $gcode .= $self->_extrude_infill($island->{infill} // {});
+                    $gcode .= $self->_extrude_perimeters($island->{perimeters} // {});
                 } else {
-                    $gcode .= $self->_extrude_perimeters($perimeters_by_island[$i], $region);
+                    $gcode .= $self->_extrude_perimeters($island->{perimeters} // {});
-                    $gcode .= $self->_extrude_infill($infill_by_island[$i], $region);
+                    $gcode .= $self->_extrude_infill($island->{infill} // {});
                 }
             }
         }
@@ -452,31 +485,30 @@ sub process_layer {
 }
 
 sub _extrude_perimeters {
-    my $self = shift;
+    my ($self, $entities_by_region) = @_;
-    my ($island_perimeters, $region) = @_;
-    
-    return "" if !@$island_perimeters;
     
     my $gcode = "";
-    $gcode .= $self->_gcodegen->set_extruder($region->config->perimeter_extruder-1);
+    foreach my $region_id (sort keys %$entities_by_region) {
-    $gcode .= $self->_gcodegen->extrude($_, 'perimeter') for @$island_perimeters;
+        $self->_gcodegen->config->apply_region_config($self->print->get_region($region_id)->config);
+        $gcode .= $self->_gcodegen->extrude($_, 'perimeter')
+            for @{ $entities_by_region->{$region_id} };
+    }
     return $gcode;
 }
 
 sub _extrude_infill {
-    my $self = shift;
+    my ($self, $entities_by_region) = @_;
-    my ($island_fills, $region) = @_;
-    
-    return "" if !@$island_fills;
     
     my $gcode = "";
-    $gcode .= $self->_gcodegen->set_extruder($region->config->infill_extruder-1);
+    foreach my $region_id (sort keys %$entities_by_region) {
-    for my $fill (@$island_fills) {
+        $self->_gcodegen->config->apply_region_config($self->print->get_region($region_id)->config);
+        for my $fill (@{ $entities_by_region->{$region_id} }) {
             if ($fill->isa('Slic3r::ExtrusionPath::Collection')) {
-            $gcode .= $self->_gcodegen->extrude($_, 'fill') 
+                $gcode .= $self->_gcodegen->extrude($_, 'infill') 
                     for @{$fill->chained_path_from($self->_gcodegen->last_pos, 0)};
             } else {
-            $gcode .= $self->_gcodegen->extrude($fill, 'fill') ;
+                $gcode .= $self->_gcodegen->extrude($fill, 'infill') ;
+            }
         }
     }
     return $gcode;

lib/Slic3r/Print/Object.pm

@@ -1004,7 +1004,10 @@ sub combine_infill {
         next unless $every > 1 && $region->config->fill_density > 0;
         
         # limit the number of combined layers to the maximum height allowed by this regions' nozzle
-        my $nozzle_diameter = $self->print->config->get_at('nozzle_diameter', $region->config->infill_extruder-1);
+        my $nozzle_diameter = min(
+            $self->print->config->get_at('nozzle_diameter', $region->config->infill_extruder-1),
+            $self->print->config->get_at('nozzle_diameter', $region->config->solid_infill_extruder-1),
+        );
         
         # define the combinations
         my %combine = ();   # layer_idx => number of additional combined lower layers

lib/Slic3r/Print/SupportMaterial.pm

@@ -262,7 +262,7 @@ sub contact_area {
         {
             # get the average nozzle diameter used on this layer
             my @nozzle_diameters = map $self->print_config->get_at('nozzle_diameter', $_),
-                map { $_->config->perimeter_extruder-1, $_->config->infill_extruder-1 }
+                map { $_->config->perimeter_extruder-1, $_->config->infill_extruder-1, $_->config->solid_infill_extruder-1 }
                 @{$layer->regions};
             my $nozzle_diameter = sum(@nozzle_diameters)/@nozzle_diameters;
             

slic3r.pl

@@ -505,6 +505,7 @@ $j
     --perimeter-extruder
                         Extruder to use for perimeters (1+, default: $config->{perimeter_extruder})
     --infill-extruder   Extruder to use for infill (1+, default: $config->{infill_extruder})
+    --solid-infill-extruder   Extruder to use for solid infill (1+, default: $config->{solid_infill_extruder})
     --support-material-extruder
                         Extruder to use for support material (1+, default: $config->{support_material_extruder})
     --support-material-interface-extruder

t/fill.t

@@ -146,6 +146,7 @@ sub scale_points (@) { map [scale $_->[X], scale $_->[Y]], @_ }
 
 {
     my $collection = Slic3r::ExtrusionPath::Collection->new(
+        EXTR_ROLE_PERIMETER,
         map Slic3r::ExtrusionPath->new(polyline => $_, role => 0, mm3_per_mm => 1),
             Slic3r::Polyline->new([0,15], [0,18], [0,20]),
             Slic3r::Polyline->new([0,10], [0,8], [0,5]),
@@ -158,6 +159,7 @@ sub scale_points (@) { map [scale $_->[X], scale $_->[Y]], @_ }
 
 {
     my $collection = Slic3r::ExtrusionPath::Collection->new(
+        EXTR_ROLE_PERIMETER,
         map Slic3r::ExtrusionPath->new(polyline => $_, role => 0, mm3_per_mm => 1),
             Slic3r::Polyline->new([15,0], [10,0], [4,0]),
             Slic3r::Polyline->new([10,5], [15,5], [20,5]),

xs/lib/Slic3r/XS.pm

@@ -64,9 +64,9 @@ use overload
     'fallback' => 1;
 
 sub new {
-    my ($class, @paths) = @_;
+    my ($class, $type, @paths) = @_;
     
-    my $self = $class->_new;
+    my $self = $class->_new($type);
     $self->append(@paths);
     return $self;
 }

xs/src/libslic3r/ExtrusionEntity.cpp

@@ -76,9 +76,18 @@ ExtrusionPath::is_perimeter() const
 }
 
 bool
-ExtrusionPath::is_fill() const
+ExtrusionPath::is_infill() const
 {
-    return this->role == erInternalInfill
+    return this->role == erBridgeInfill
+        || this->role == erInternalInfill
+        || this->role == erSolidInfill
+        || this->role == erTopSolidInfill;
+}
+
+bool
+ExtrusionPath::is_solid_infill() const
+{
+    return this->role == erBridgeInfill
         || this->role == erSolidInfill
         || this->role == erTopSolidInfill;
 }

xs/src/libslic3r/ExtrusionEntity.hpp

@@ -64,7 +64,8 @@ class ExtrusionPath : public ExtrusionEntity
     void simplify(double tolerance);
     double length() const;
     bool is_perimeter() const;
-    bool is_fill() const;
+    bool is_infill() const;
+    bool is_solid_infill() const;
     bool is_bridge() const;
     std::string gcode(Extruder* extruder, double e, double F,
         double xofs, double yofs, std::string extrusion_axis,

xs/src/libslic3r/ExtrusionEntityCollection.cpp

@@ -5,7 +5,7 @@
 namespace Slic3r {
 
 ExtrusionEntityCollection::ExtrusionEntityCollection(const ExtrusionEntityCollection& collection)
-    : no_sort(collection.no_sort), orig_indices(collection.orig_indices)
+    : no_sort(collection.no_sort), role(collection.role), orig_indices(collection.orig_indices)
 {
     this->entities.reserve(collection.entities.size());
     for (ExtrusionEntitiesPtr::const_iterator it = collection.entities.begin(); it != collection.entities.end(); ++it)
@@ -23,6 +23,7 @@ void
 ExtrusionEntityCollection::swap (ExtrusionEntityCollection &c)
 {
     std::swap(this->entities, c.entities);
+    std::swap(this->role, c.role);
     std::swap(this->orig_indices, c.orig_indices);
     std::swap(this->no_sort, c.no_sort);
 }

xs/src/libslic3r/ExtrusionEntityCollection.hpp

@@ -13,7 +13,9 @@ class ExtrusionEntityCollection : public ExtrusionEntity
     ExtrusionEntitiesPtr entities;
     std::vector<size_t> orig_indices;  // handy for XS
     bool no_sort;
+    ExtrusionRole role;
     ExtrusionEntityCollection(): no_sort(false) {};
+    ExtrusionEntityCollection(ExtrusionRole _role): no_sort(false), role(_role) {};
     ExtrusionEntityCollection(const ExtrusionEntityCollection &collection);
     ExtrusionEntityCollection& operator= (const ExtrusionEntityCollection &other);
     void swap (ExtrusionEntityCollection &c);

xs/src/libslic3r/Layer.hpp

@@ -46,9 +46,11 @@ class LayerRegion
     PolylineCollection unsupported_bridge_edges;
 
     // ordered collection of extrusion paths/loops to build all perimeters
+    // (this collection contains both ExtrusionPath and ExtrusionLoop objects)
     ExtrusionEntityCollection perimeters;
 
     // ordered collection of extrusion paths to fill surfaces
+    // (this collection contains only ExtrusionEntityCollection objects)
     ExtrusionEntityCollection fills;
     
     Flow flow(FlowRole role, bool bridge = false, double width = -1) const;

xs/src/libslic3r/Print.cpp

@@ -301,6 +301,7 @@ Print::extruders() const
     FOREACH_REGION(this, region) {
         extruders.insert((*region)->config.perimeter_extruder - 1);
         extruders.insert((*region)->config.infill_extruder - 1);
+        extruders.insert((*region)->config.solid_infill_extruder - 1);
     }
     FOREACH_OBJECT(this, object) {
         extruders.insert((*object)->config.support_material_extruder - 1);

xs/src/libslic3r/PrintConfig.cpp

@@ -694,6 +694,13 @@ PrintConfigDef::build_def() {
     Options["solid_infill_below_area"].cli = "solid-infill-below-area=f";
     Options["solid_infill_below_area"].min = 0;
 
+    Options["solid_infill_extruder"].type = coInt;
+    Options["solid_infill_extruder"].label = "Solid infill extruder";
+    Options["solid_infill_extruder"].category = "Extruders";
+    Options["solid_infill_extruder"].tooltip = "The extruder to use when printing solid infill.";
+    Options["solid_infill_extruder"].cli = "solid-infill-extruder=i";
+    Options["solid_infill_extruder"].min = 1;
+
     Options["solid_infill_every_layers"].type = coInt;
     Options["solid_infill_every_layers"].label = "Solid infill every";
     Options["solid_infill_every_layers"].category = "Infill";

xs/src/libslic3r/PrintConfig.hpp

@@ -93,6 +93,10 @@ class DynamicPrintConfig : public DynamicConfig
                     this->option("support_material_interface_extruder", true)->setInt(extruder);
             }
         }
+        
+        if (!this->has("solid_infill_extruder") && this->has("infill_extruder"))
+            this->option("solid_infill_extruder", true)->setInt(this->option("infill_extruder")->getInt());
+        
         if (this->has("spiral_vase") && this->opt<ConfigOptionBool>("spiral_vase", true)->value) {
             {
                 // this should be actually done only on the spiral layers instead of all
@@ -225,6 +229,7 @@ class PrintRegionConfig : public virtual StaticPrintConfig
     ConfigOptionInt                 perimeters;
     ConfigOptionFloatOrPercent      small_perimeter_speed;
     ConfigOptionFloat               solid_infill_below_area;
+    ConfigOptionInt                 solid_infill_extruder;
     ConfigOptionFloatOrPercent      solid_infill_extrusion_width;
     ConfigOptionInt                 solid_infill_every_layers;
     ConfigOptionFloatOrPercent      solid_infill_speed;
@@ -259,6 +264,7 @@ class PrintRegionConfig : public virtual StaticPrintConfig
         this->perimeter_extrusion_width.percent                  = false;
         this->perimeter_speed.value                              = 30;
         this->perimeters.value                                   = 3;
+        this->solid_infill_extruder.value                        = 1;
         this->small_perimeter_speed.value                        = 30;
         this->small_perimeter_speed.percent                      = false;
         this->solid_infill_below_area.value                      = 70;
@@ -299,6 +305,7 @@ class PrintRegionConfig : public virtual StaticPrintConfig
         if (opt_key == "perimeters")                                 return &this->perimeters;
         if (opt_key == "small_perimeter_speed")                      return &this->small_perimeter_speed;
         if (opt_key == "solid_infill_below_area")                    return &this->solid_infill_below_area;
+        if (opt_key == "solid_infill_extruder")                      return &this->solid_infill_extruder;
         if (opt_key == "solid_infill_extrusion_width")               return &this->solid_infill_extrusion_width;
         if (opt_key == "solid_infill_every_layers")                  return &this->solid_infill_every_layers;
         if (opt_key == "solid_infill_speed")                         return &this->solid_infill_speed;

xs/src/libslic3r/PrintObject.cpp

@@ -255,6 +255,7 @@ PrintObject::invalidate_state_by_config_options(const std::vector<t_config_optio
             || *opt_key == "top_solid_layers"
             || *opt_key == "solid_infill_below_area"
             || *opt_key == "infill_extruder"
+            || *opt_key == "solid_infill_extruder"
             || *opt_key == "infill_extrusion_width") {
             steps.insert(posPrepareInfill);
         } else if (*opt_key == "external_fill_pattern"

xs/src/libslic3r/PrintRegion.cpp

@@ -53,8 +53,10 @@ PrintRegion::flow(FlowRole role, double layer_height, bool bridge, bool first_la
     size_t extruder;  // 1-based
     if (role == frPerimeter || role == frExternalPerimeter) {
         extruder = this->config.perimeter_extruder;
-    } else if (role == frInfill || role == frSolidInfill || role == frTopSolidInfill) {
+    } else if (role == frInfill) {
         extruder = this->config.infill_extruder;
+    } else if (role == frSolidInfill || role == frTopSolidInfill) {
+        extruder = this->config.solid_infill_extruder;
     } else {
         CONFESS("Unknown role $role");
     }

xs/t/12_extrusionpathcollection.t

@@ -26,7 +26,10 @@ my $loop = Slic3r::ExtrusionLoop->new_from_paths(
     ),
 );
 
-my $collection = Slic3r::ExtrusionPath::Collection->new($path);
+my $collection = Slic3r::ExtrusionPath::Collection->new(
+    Slic3r::ExtrusionPath::EXTR_ROLE_FILL,
+    $path,
+);
 isa_ok $collection, 'Slic3r::ExtrusionPath::Collection', 'collection object with items in constructor';
 ok !$collection->no_sort, 'no_sort is false by default';
 
@@ -55,6 +58,7 @@ is scalar(@{$collection->[1]}), 1, 'appended collection was duplicated';
 
 {
     my $collection = Slic3r::ExtrusionPath::Collection->new(
+        Slic3r::ExtrusionPath::EXTR_ROLE_FILL,
         map Slic3r::ExtrusionPath->new(polyline => $_, role => 0, mm3_per_mm => 1),
             Slic3r::Polyline->new([0,15], [0,18], [0,20]),
             Slic3r::Polyline->new([0,10], [0,8], [0,5]),
@@ -71,6 +75,7 @@ is scalar(@{$collection->[1]}), 1, 'appended collection was duplicated';
 
 {
     my $collection = Slic3r::ExtrusionPath::Collection->new(
+        Slic3r::ExtrusionPath::EXTR_ROLE_FILL,
         map Slic3r::ExtrusionPath->new(polyline => $_, role => 0, mm3_per_mm => 1),
             Slic3r::Polyline->new([15,0], [10,0], [4,0]),
             Slic3r::Polyline->new([10,5], [15,5], [20,5]),

xs/t/15_config.t

@@ -4,7 +4,7 @@ use strict;
 use warnings;
 
 use Slic3r::XS;
-use Test::More tests => 107;
+use Test::More tests => 108;
 
 foreach my $config (Slic3r::Config->new, Slic3r::Config::Full->new) {
     $config->set('layer_height', 0.3);
@@ -182,6 +182,13 @@ foreach my $config (Slic3r::Config->new, Slic3r::Config::Full->new) {
     is $config->get('perimeter_extruder'), 3, 'defined extruder is not overwritten by default extruder';
 }
 
+{
+    my $config = Slic3r::Config->new;
+    $config->set('infill_extruder', 2);
+    $config->normalize;
+    is $config->get('solid_infill_extruder'), 2, 'undefined solid infill extruder is populated with infill extruder';
+}
+
 {
     my $config = Slic3r::Config->new;
     $config->set('spiral_vase', 1);

xs/xsp/ExtrusionEntityCollection.xsp

@@ -6,7 +6,7 @@
 %}
 
 %name{Slic3r::ExtrusionPath::Collection} class ExtrusionEntityCollection {
-    %name{_new} ExtrusionEntityCollection();
+    %name{_new} ExtrusionEntityCollection(ExtrusionRole role);
     void reverse();
     void clear()
         %code{% THIS->entities.clear(); %};

xs/xsp/ExtrusionPath.xsp

@@ -23,7 +23,8 @@
     void simplify(double tolerance);
     double length();
     bool is_perimeter();
-    bool is_fill();
+    bool is_infill();
+    bool is_solid_infill();
     bool is_bridge();
     std::string gcode(Extruder* extruder, double e, double F,
         double xofs, double yofs, std::string extrusion_axis,