3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77

Browse source
This commit is contained in:
Alessandro Ranellucci 2011-12-01 22:03:13 +01:00
parent 2a02d26ca5
commit e99c9f9e5f
6 changed files with 120 additions and 112 deletions
Download patch file Download diff file Expand all files Collapse all files

12
README.markdown
View file

@ -100,17 +100,17 @@ The author is Alessandro Ranellucci (me).
Filament options:
--filament-diameter Diameter in mm of your raw filament (default: 3)
--extrusion-multiplier
Change this to alter the amount of plastic extruded. There should be
Change this to alter the amount of plastic extruded. There should be
very little need to change this value, which is only useful to
compensate for filament packing (default: 1)
--temperature Extrusion temperature, set 0 to disable (default: 200)
Speed options:
--print-feed-rate Speed of print moves in mm/sec (default: 60)
--travel-feed-rate Speed of non-print moves in mm/sec (default: 130)
--perimeter-feed-rate
Speed of print moves for perimeters in mm/sec (default: 60)
--bridge-feed-rate Speed of bridge print moves in mm/sec (default: 60)
--travel-speed Speed of non-print moves in mm/sec (default: 130)
--perimeter-speed Speed of print moves for perimeters in mm/sec (default: 30)
--infill-speed Speed of print moves in mm/sec (default: 60)
--solid-infill-speed Speed of print moves for solid surfaces in mm/sec (default: 60)
--bridge-speed Speed of bridge print moves in mm/sec (default: 60)
--bottom-layer-speed-ratio
Factor to increase/decrease speeds on bottom
layer by (default: 0.3)