Merge branch 'master' into fs_emboss

# Conflicts:
#	src/slic3r/GUI/GLCanvas3D.cpp
#	src/slic3r/GUI/Selection.cpp

resources/icons/edit.svg

@@ -0,0 +1,4 @@
+<svg width="40" height="40" viewBox="0 0 40 40" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path d="M38.2923 1.34808L38.2441 1.30417C37.3235 0.463194 36.1301 0 34.8837 0C33.4864 0 32.1449 0.591489 31.2029 1.62267L13.3916 21.1224C13.2293 21.3002 13.1061 21.5099 13.03 21.7381L10.9357 28.0167C10.6935 28.7426 10.815 29.5453 11.2607 30.164C11.7099 30.7875 12.4336 31.1598 13.1967 31.1598H13.1968C13.5269 31.1598 13.8495 31.0919 14.1555 30.958L20.2195 28.3052C20.44 28.2087 20.6377 28.0671 20.8 27.8894L38.6114 8.38977C40.4648 6.36078 40.3219 3.20211 38.2923 1.34808ZM14.9484 26.8569L16.1773 23.1726L16.281 23.0591L18.6102 25.1866L18.5066 25.3001L14.9484 26.8569ZM36.0718 6.07002L20.93 22.6472L18.6007 20.5197L33.7426 3.94242C34.0387 3.61819 34.444 3.43956 34.8838 3.43956C35.2696 3.43956 35.6391 3.5831 35.9251 3.84428L35.9731 3.88819C36.6019 4.46248 36.6461 5.44127 36.0718 6.07002V6.07002Z" fill="#ED6B21"/>
+<path d="M34.8369 15.8664C33.8871 15.8664 33.1171 16.6364 33.1171 17.5862V32.1868C33.1171 34.5984 31.155 36.5604 28.7435 36.5604H7.89985C5.48815 36.5604 3.52623 34.5984 3.52623 32.1868V11.5125C3.52623 9.10094 5.48826 7.1389 7.89985 7.1389H22.9865C23.9363 7.1389 24.7063 6.3689 24.7063 5.41912C24.7063 4.46934 23.9363 3.69934 22.9865 3.69934H7.89985C3.59158 3.69934 0.0866699 7.20437 0.0866699 11.5125V32.1867C0.0866699 36.4949 3.59169 39.9999 7.89985 39.9999H28.7433C33.0515 39.9999 36.5565 36.4949 36.5565 32.1867V17.5862C36.5566 16.6364 35.7866 15.8664 34.8369 15.8664V15.8664Z" fill="#808080"/>
+</svg>

resources/localization/cs/PrusaSlicer_cs.po

@@ -2135,8 +2135,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "Vyberte jeden nebo více souborů (STL, OBJ):"
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "Vyberte jeden nebo více souborů (STL/OBJ/AMF/3MF/PRUSA):"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "Vyberte jeden nebo více souborů (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -6044,12 +6044,13 @@ msgid "Import STL (Imperial Units)"
 msgstr "Importovat STL (imperiální jednotky)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "Importovat STL/OBJ/AM&F/3MF"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "Importovat STL/3MF/STEP/OBJ/AM&F"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
-msgstr "Importovat STL/OBJ/AMF/3MF bez konfigurace, zachová stávající podložku"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+msgstr ""
+"Importovat STL/3MF/STEP/OBJ/AMF bez konfigurace, zachová stávající podložku"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8227,9 +8228,8 @@ msgid "Open new instance"
 msgstr "Otevřít novou instanci"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr ""
-"Otevřít projekt STL/OBJ/AMF/3MF s konfigurací, odstranit modely na podložce"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "Otevřít projekt AMF/3MF s konfigurací, odstranit modely na podložce"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/localization/de/PrusaSlicer_de.po

@@ -2130,8 +2130,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "Wählen Sie eine oder mehrere Dateien (STL, OBJ):"
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "Wählen Sie eine oder mehrere Dateien (STL/OBJ/AMF/3MF/PRUSA):"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "Wählen Sie eine oder mehrere Dateien (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -6141,13 +6141,13 @@ msgid "Import STL (Imperial Units)"
 msgstr "STL importieren (imperiale Einheiten)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "Importiere STL/OBJ/AM&F/3MF"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "Importiere STL/3MF/STEP/OBJ/AM&F"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
 msgstr ""
-"Importiere STL/OBJ/AMF/3MF mit Konfigurationsdaten, Druckplatte beibehalten"
+"Importiere STL/3MF/STEP/OBJ/AMF mit Konfigurationsdaten, Druckplatte beibehalten"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8357,8 +8357,8 @@ msgid "Open new instance"
 msgstr "Neue Instanz öffnen"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr "Öffne Projekt STL/OBJ/AMF/3MF mit Konfiguration, Druckplatte leeren"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "Öffne Projekt AMF/3MF mit Konfiguration, Druckplatte leeren"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/localization/es/PrusaSlicer_es.po

@@ -2115,8 +2115,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "Elije uno o varios archivos (STL, OBJ):"
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "Escoje uno o más archivos (STL/OBJ/AMF/3MF/PRUSA):"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "Escoje uno o más archivos (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -6096,12 +6096,12 @@ msgid "Import STL (Imperial Units)"
 msgstr "Importar STL (Unidades Imperiales)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "Importar STL/OBJ/AM&F/3MF"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "Importar STL/3MF/STEP/OBJ/AM&F"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
-msgstr "Importar  STL/OBJ/AMF/3MF sin configuración, mantener la base"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+msgstr "Importar  STL/3MF/STEP/OBJ/AMF sin configuración, mantener la base"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8302,8 +8302,8 @@ msgid "Open new instance"
 msgstr "Abrir instancia nueva"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr "Abrir proyecto STL/OBJ/AMF/3MF con configuración, limpiar plataforma"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "Abrir proyecto AMF/3MF con configuración, limpiar plataforma"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/localization/fr/PrusaSlicer_fr.po

@@ -2139,8 +2139,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "Choisissez un ou plusieurs fichiers (STL, OBJ) :"
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "Choisir un ou plusieurs fichiers (STL/OBJ/AMF/3MF/PRUSA) :"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "Choisir un ou plusieurs fichiers (STL/3MF/STEP/OBJ/AMF/PRUSA) :"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -6155,12 +6155,12 @@ msgid "Import STL (Imperial Units)"
 msgstr "Importer le STL (unités impériales)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "Importer STL/OBJ/AM&F/3MF"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "Importer STL/3MF/STEP/OBJ/AM&F"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
-msgstr "Importer un STL/OBJ/AMF/3MF sans configuration, conserver le plateau"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+msgstr "Importer un STL/3MF/STEP/OBJ/AMF sans configuration, conserver le plateau"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8375,9 +8375,8 @@ msgid "Open new instance"
 msgstr "Ouvrir une nouvelle instance"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr ""
-"Ouvrir un projet STL/OBJ/AMF/3MF avec configuration, libérer le plateau"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "Ouvrir un projet AMF/3MF avec configuration, libérer le plateau"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/localization/it/PrusaSlicer_it.po

@@ -2119,8 +2119,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "Scegli uno o più file (STL, OBJ):"
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "Seleziona uno o più file (STL/OBJ/AMF/3MF/PRUSA):"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "Seleziona uno o più file (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -6091,12 +6091,12 @@ msgid "Import STL (Imperial Units)"
 msgstr "Importa STL (unità imperiali)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "Importa STL/OBJ/AM&F/3MF"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "Importa STL/3MF/STEP/OBJ/AM&F"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
-msgstr "Importa STL/OBJ/AMF/3MF senza configurazione, mantieni piano"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+msgstr "Importa STL/3MF/STEP/OBJ/AMF senza configurazione, mantieni piano"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8294,8 +8294,8 @@ msgid "Open new instance"
 msgstr "Apri una nuova istanza"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr "Apri progetto STL/OBJ/AMF/3MF con configurazione, pulisci piano"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "Apri progetto AMF/3MF con configurazione, pulisci piano"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/localization/ja/PrusaSlicer_ja.po

@@ -2081,8 +2081,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "1つ以上のファイル(STL, OBJ)を選択します："
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "1つ以上のファイルの選択(STL/OBJ/AMF/3MF/PRUSA):"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "1つ以上のファイルの選択(STL/3MF/STEP/OBJ/AMF/PRUSA):"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -5963,12 +5963,12 @@ msgid "Import STL (Imperial Units)"
 msgstr "STLのインポート(インチ)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "STL/OBJ/AMF/3MFのインポート(&F)"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "STL/3MF/STEP/OBJ/AMFのインポート(&F)"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
-msgstr "既存のプレートを保持しながらSTL/OBJ/AMF/3MFを設定なしでインポート"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+msgstr "既存のプレートを保持しながらSTL/3MF/STEP/OBJ/AMFを設定なしでインポート"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8124,8 +8124,8 @@ msgid "Open new instance"
 msgstr "新しいインスタンスを開く"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr "プロジェクトSTL/OBJ/AMF/3MFを設定を含めて開き、プレートをクリアします"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "プロジェクトAMF/3MFを設定を含めて開き、プレートをクリアします"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/localization/pl/PrusaSlicer_pl.po

@@ -2145,8 +2145,8 @@ msgid "Choose one or more files (STL, OBJ):"
 msgstr "Wybierz jeden lub więcej plików (STL, OBJ):"
 
 #: src/slic3r/GUI/GUI_App.cpp:1870
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr "Wybierz jeden lub więcej plików (STL/OBJ/AMF/3MF/PRUSA):"
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+msgstr "Wybierz jeden lub więcej plików (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1361
 msgid "Choose the type of firmware used by your printer."
@@ -6080,12 +6080,12 @@ msgid "Import STL (Imperial Units)"
 msgstr "Import STL (jednostki imperialne)"
 
 #: src/slic3r/GUI/MainFrame.cpp:1208
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr "Import STL/OBJ/AM&F/3MF"
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
+msgstr "Import STL/3MF/STEP/OBJ/AM&F"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:83
-msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
-msgstr "Otwórz STL/OBJ/AMF/3MF bez konfiguracji, zachowaj zawartość stołu"
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+msgstr "Otwórz STL/3MF/STEP/OBJ/AMF bez konfiguracji, zachowaj zawartość stołu"
 
 #: src/slic3r/GUI/Plater.cpp:5293
 msgid "Import config only"
@@ -8279,8 +8279,8 @@ msgid "Open new instance"
 msgstr "Otwórz nową instancję"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:78
-msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
-msgstr "Otwórz projekt STL/OBJ/AMF/3MF z konfiguracją, wyczyść stół"
+msgid "Open project AMF/3MF with config, clear plater"
+msgstr "Otwórz projekt AMF/3MF z konfiguracją, wyczyść stół"
 
 #: src/slic3r/GUI/MainFrame.cpp:1082
 #, c-format, boost-format

resources/profiles/Rigid3D.idx

@@ -0,0 +1,3 @@
+min_slic3r_version = 2.6.0-alpha0
+1.0.0 Initial Rigid3D bundle
+

resources/profiles/Rigid3D.ini

@@ -0,0 +1,469 @@
+# Print profiles for the Rigid3D printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Rigid3D
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.0
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Rigid3D/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:Zero2]
+name = Rigid3D Zero2
+variants = 0.4
+technology = FFF
+family = Zero
+bed_model = zero_bed.stl
+bed_texture = zero2_bed.png
+default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
+
+[printer_model:Zero3]
+name = Rigid3D Zero3
+variants = 0.4
+technology = FFF
+family = Zero
+bed_model = zero_bed.stl
+bed_texture = zero3_bed.png
+default_materials =Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
+
+[printer_model:Mucit]
+name = Rigid3D Mucit
+variants = 0.4
+technology = FFF
+family = Mucit
+bed_model = mucit_bed.stl
+bed_texture = mucit_bed.png
+default_materials = Generic PLA @Rigid3D; Rigid3D PLA @Rigid3D
+
+[printer_model:Mucit2]
+name = Rigid3D Mucit2
+variants = 0.4
+technology = FFF
+family = Mucit
+bed_model = mucit2_bed.stl
+bed_texture = mucit2_bed.png
+default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_min_thickness = 0.8
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_separation = 0
+brim_type = no_brim
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers =
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50%
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 10%
+fill_pattern = line
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 50%
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 1
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = rear
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 0
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 100%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thick_bridges = 0
+thin_walls = 1
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 100%
+top_solid_min_thickness = 0.8
+travel_speed = 80
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.06mm - Ultra @Rigid3D]
+inherits = *common*
+layer_height = 0.06
+bottom_solid_layers = 10
+top_solid_layers = 14
+
+[print:0.12mm - Super @Rigid3D]
+inherits = *common*
+layer_height = 0.12
+bottom_solid_layers = 7
+top_solid_layers = 7
+
+[print:0.16mm - Good @Rigid3D]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 5
+
+[print:0.20mm - Standard @Rigid3D]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 4
+
+[print:0.24mm - Draft @Rigid3D]
+inherits = *common*
+layer_height = 0.24
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.28mm - Low @Rigid3D]
+inherits = *common*
+layer_height = 0.28
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[filament:*common*]
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_below_layer_time = 60
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_wipe = nil
+min_print_speed = 10
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n"
+
+[filament:*PLA*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+filament_type = PLA
+full_fan_speed_layer = 4
+max_fan_speed = 100
+min_fan_speed = 100
+
+[filament:*ABS*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = ABS
+max_fan_speed = 0
+min_fan_speed = 0
+
+[filament:*PETG*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = PETG
+max_fan_speed = 50
+min_fan_speed = 30
+
+[filament:*FLEX*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+filament_type = FLEX
+full_fan_speed_layer = 4
+max_fan_speed = 100
+min_fan_speed = 100
+
+[filament:*NYLON*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = NYLON
+max_fan_speed = 0
+min_fan_speed = 0
+
+[filament:Generic PLA @Rigid3D]
+inherits = *PLA*
+bed_temperature = 55
+filament_colour = #FFFF00
+filament_density = 1.24
+filament_max_volumetric_speed = 12
+first_layer_temperature = 215
+temperature = 215
+first_layer_bed_temperature = 60
+
+[filament:Rigid3D PLA @Rigid3D]
+inherits = *PLA*
+filament_colour = #FFFF00
+filament_density = 1.24
+first_layer_temperature = 210
+temperature = 205
+first_layer_bed_temperature = 60
+bed_temperature = 55
+filament_max_volumetric_speed = 12
+
+[filament:Generic ABS @Rigid3D]
+inherits = *ABS*
+filament_colour = #49B928
+filament_density = 1.04
+first_layer_temperature = 235
+temperature = 235
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 8
+
+[filament:Generic PETG @Rigid3D]
+inherits = *PETG*
+filament_colour = #FF8000
+filament_density = 1.27
+first_layer_temperature = 240
+temperature = 240
+first_layer_bed_temperature = 70
+bed_temperature = 70
+filament_max_volumetric_speed = 8
+
+[filament:Generic FLEX @Rigid3D]
+inherits = *FLEX*
+filament_colour = #C80000
+filament_density = 1.21
+first_layer_temperature = 225
+temperature = 225
+first_layer_bed_temperature = 70
+bed_temperature = 70
+filament_max_volumetric_speed = 2.5
+
+[filament:Generic Nylon @Rigid3D]
+inherits = *NYLON*
+filament_colour = #0AF1CE
+filament_density = 1.12
+first_layer_temperature = 250
+temperature = 250
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 8
+
+# Common printer preset
+[printer:*common*]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+color_change_gcode = M600
+default_filament_profile = "Rigid3D PLA @Rigid3D"
+default_print_profile = "0.20mm - Standard @Rigid3D"
+deretract_speed = 0
+extruder_offset = 0x0
+gcode_flavor = marlin2
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n\n
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 1000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_travel = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 25
+machine_max_feedrate_x = 120
+machine_max_feedrate_y = 120
+machine_max_feedrate_z = 20
+machine_max_jerk_e = 5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.3
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.32
+min_layer_height = 0.05
+nozzle_diameter = 0.4
+pause_print_gcode = M0
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+remaining_times = 1
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 25
+silent_mode = 0
+single_extruder_multi_material = 0
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
+[printer:Rigid3D Zero2]
+inherits = *common*
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 190
+printer_model = Zero2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO2\nPRINTER_HAS_HEATEDBED\n
+start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G1 X0 Y180\nM107\nG91\nG0 Z20\nT0\nG1 E-1\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n
+
+[printer:Rigid3D Zero3]
+inherits = *common*
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 200
+printer_model = Zero3
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO3\nPRINTER_HAS_HEATEDBED\n
+start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
+
+[printer:Rigid3D Mucit]
+inherits = *common*
+bed_shape = 0x0,150x0,150x150,0x150
+max_print_height = 150
+printer_model = Mucit
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT\n
+start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G1 X0 Y140\nM107\nG91\nG0 Z20\nT0\nG1 E-2\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n
+
+[printer:Rigid3D Mucit2]
+inherits = *common*
+bed_shape = 0x0,150x0,150x150,0x150
+max_print_height = 150
+printer_model = Mucit2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT2\nPRINTER_HAS_HEATEDBED\n
+start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n