Merge remote-tracking branch 'origin/master' into ys_manipulation_panel_rw

This commit is contained in:
YuSanka 2019-09-25 11:33:19 +02:00
commit efb9ef37f6
36 changed files with 170 additions and 174 deletions

View file

@ -89,33 +89,34 @@ struct stl_neighbors {
};
struct stl_stats {
stl_stats() { this->reset(); }
void reset() { memset(this, 0, sizeof(stl_stats)); this->volume = -1.0; }
char header[81];
stl_type type;
uint32_t number_of_facets;
stl_vertex max;
stl_vertex min;
stl_vertex size;
float bounding_diameter;
float shortest_edge;
float volume;
int connected_edges;
int connected_facets_1_edge;
int connected_facets_2_edge;
int connected_facets_3_edge;
int facets_w_1_bad_edge;
int facets_w_2_bad_edge;
int facets_w_3_bad_edge;
int original_num_facets;
int edges_fixed;
int degenerate_facets;
int facets_removed;
int facets_added;
int facets_reversed;
int backwards_edges;
int normals_fixed;
int number_of_parts;
stl_stats() { memset(&header, 0, 81); }
char header[81] = "";
stl_type type = (stl_type)0;
uint32_t number_of_facets = 0;
stl_vertex max = stl_vertex::Zero();
stl_vertex min = stl_vertex::Zero();
stl_vertex size = stl_vertex::Zero();
float bounding_diameter = 0.f;
float shortest_edge = 0.f;
float volume = -1.f;
int connected_edges = 0;
int connected_facets_1_edge = 0;
int connected_facets_2_edge = 0;
int connected_facets_3_edge = 0;
int facets_w_1_bad_edge = 0;
int facets_w_2_bad_edge = 0;
int facets_w_3_bad_edge = 0;
int original_num_facets = 0;
int edges_fixed = 0;
int degenerate_facets = 0;
int facets_removed = 0;
int facets_added = 0;
int facets_reversed = 0;
int backwards_edges = 0;
int normals_fixed = 0;
int number_of_parts = 0;
void clear() { *this = stl_stats(); }
};
struct stl_file {
@ -124,7 +125,7 @@ struct stl_file {
void clear() {
this->facet_start.clear();
this->neighbors_start.clear();
this->stats.reset();
this->stats.clear();
}
size_t memsize() const {

View file

@ -36,6 +36,10 @@
#error "SEEK_SET not defined"
#endif
#ifndef BOOST_LITTLE_ENDIAN
extern void stl_internal_reverse_quads(char *buf, size_t cnt);
#endif /* BOOST_LITTLE_ENDIAN */
static FILE* stl_open_count_facets(stl_file *stl, const char *file)
{
// Open the file in binary mode first.
@ -238,10 +242,6 @@ bool stl_open(stl_file *stl, const char *file)
return result;
}
#ifndef BOOST_LITTLE_ENDIAN
extern void stl_internal_reverse_quads(char *buf, size_t cnt);
#endif /* BOOST_LITTLE_ENDIAN */
void stl_allocate(stl_file *stl)
{
// Allocate memory for the entire .STL file.

View file

@ -15,4 +15,4 @@
#undef clipper_hpp
#undef use_xyz
#endif clipper_z_hpp
#endif // clipper_z_hpp

View file

@ -249,7 +249,7 @@ ConfigOption* ConfigOptionDef::create_default_option() const
// Special case: For a DynamicConfig, convert a templated enum to a generic enum.
new ConfigOptionEnumGeneric(this->enum_keys_map, this->default_value->getInt()) :
this->default_value->clone();
return this->create_empty_option();
return this->create_empty_option();
}
// Assignment of the serialization IDs is not thread safe. The Defs shall be initialized from the main thread!

View file

@ -353,7 +353,7 @@ public:
bool apply_override(const ConfigOption *rhs) override {
if (this->nullable())
throw std::runtime_error("Cannot override a nullable ConfigOption.");
if (rhs->type() != this->type())
if (rhs->type() != this->type())
throw std::runtime_error("ConfigOptionVector.apply_override() applied to different types.");
auto rhs_vec = static_cast<const ConfigOptionVector<T>*>(rhs);
if (! rhs->nullable()) {
@ -461,7 +461,7 @@ public:
for (const double &v : this->values) {
if (&v != &this->values.front())
ss << ",";
serialize_single_value(ss, v);
serialize_single_value(ss, v);
}
return ss.str();
}
@ -607,7 +607,7 @@ public:
for (const int &v : this->values) {
if (&v != &this->values.front())
ss << ",";
serialize_single_value(ss, v);
serialize_single_value(ss, v);
}
return ss.str();
}

View file

@ -15,40 +15,39 @@ namespace Slic3r {
struct SurfaceFillParams
{
SurfaceFillParams() : flow(0.f, 0.f, 0.f, false) { memset(this, 0, sizeof(*this)); }
// Zero based extruder ID.
unsigned int extruder;
unsigned int extruder = 0;
// Infill pattern, adjusted for the density etc.
InfillPattern pattern;
InfillPattern pattern = InfillPattern(0);
// FillBase
// in unscaled coordinates
coordf_t spacing;
coordf_t spacing = 0.;
// infill / perimeter overlap, in unscaled coordinates
coordf_t overlap;
coordf_t overlap = 0.;
// Angle as provided by the region config, in radians.
float angle;
float angle = 0.f;
// Non-negative for a bridge.
float bridge_angle;
float bridge_angle = 0.f;
// FillParams
float density;
float density = 0.f;
// Don't connect the fill lines around the inner perimeter.
bool dont_connect;
bool dont_connect = false;
// Don't adjust spacing to fill the space evenly.
bool dont_adjust;
bool dont_adjust = false;
// width, height of extrusion, nozzle diameter, is bridge
// For the output, for fill generator.
Flow flow;
Flow flow = Flow(0.f, 0.f, 0.f, false);
// For the output
ExtrusionRole extrusion_role;
ExtrusionRole extrusion_role = ExtrusionRole(0);
// Various print settings?
// Index of this entry in a linear vector.
size_t idx;
size_t idx = 0;
bool operator<(const SurfaceFillParams &rhs) const {

View file

@ -979,7 +979,7 @@ bool store_amf(const char *path, Model *model, const DynamicPrintConfig *config)
stream << layer_height_profile.front();
for (size_t i = 1; i < layer_height_profile.size(); ++i)
stream << ";" << layer_height_profile[i];
stream << "\n </metadata>\n";
stream << "\n </metadata>\n";
}
// Export layer height ranges including the layer range specific config overrides.

View file

@ -246,7 +246,7 @@ static void extract_model_from_archive(
sscanf(normal_buf[2], "%f", &facet.normal(2)) != 1) {
// Normal was mangled. Maybe denormals or "not a number" were stored?
// Just reset the normal and silently ignore it.
memset(&facet.normal, 0, sizeof(facet.normal));
facet.normal = stl_normal::Zero();
}
facets.emplace_back(facet);
}
@ -278,7 +278,7 @@ static void extract_model_from_archive(
instance->set_rotation(instance_rotation);
instance->set_scaling_factor(instance_scaling_factor);
instance->set_offset(instance_offset);
if (group_id != (size_t)-1)
if (group_id != (unsigned int)(-1))
group_to_model_object[group_id] = model_object;
} else {
// This is not the 1st mesh of a group. Add it to the ModelObject.

View file

@ -659,7 +659,7 @@ void GCode::do_export(Print *print, const char *path, GCodePreviewData *preview_
if (print->is_step_done(psGCodeExport) && boost::filesystem::exists(boost::filesystem::path(path)))
return;
print->set_started(psGCodeExport);
print->set_started(psGCodeExport);
BOOST_LOG_TRIVIAL(info) << "Exporting G-code..." << log_memory_info();
@ -1415,7 +1415,7 @@ static bool custom_gcode_sets_temperature(const std::string &gcode, const int mc
// Skip the rest of the line.
for (; *ptr != 0 && *ptr != '\r' && *ptr != '\n'; ++ ptr);
// Skip the end of line indicators.
for (; *ptr == '\r' || *ptr == '\n'; ++ ptr);
for (; *ptr == '\r' || *ptr == '\n'; ++ ptr);
}
return temp_set_by_gcode;
}

View file

@ -308,7 +308,7 @@ void ToolOrdering::fill_wipe_tower_partitions(const PrintConfig &config, coordf_
LayerTools lt_new(0.5f * (lt.print_z + lt_object.print_z));
// Find the 1st layer above lt_new.
for (j = i + 1; j < m_layer_tools.size() && m_layer_tools[j].print_z < lt_new.print_z - EPSILON; ++ j);
if (std::abs(m_layer_tools[j].print_z - lt_new.print_z) < EPSILON) {
if (std::abs(m_layer_tools[j].print_z - lt_new.print_z) < EPSILON) {
m_layer_tools[j].has_wipe_tower = true;
} else {
LayerTools &lt_extra = *m_layer_tools.insert(m_layer_tools.begin() + j, lt_new);

View file

@ -698,7 +698,7 @@ WipeTower::ToolChangeResult WipeTower::tool_change(size_t tool, bool last_in_lay
writer.append(std::string("; material : " + (m_current_tool < m_filpar.size() ? m_filpar[m_current_tool].material : "(NONE)") + " -> " + m_filpar[tool].material + "\n").c_str())
.append(";--------------------\n");
writer.speed_override_backup();
writer.speed_override_backup();
writer.speed_override(100);
Vec2f initial_position = cleaning_box.ld + Vec2f(0.f, m_depth_traversed);
@ -748,7 +748,7 @@ WipeTower::ToolChangeResult WipeTower::tool_change(size_t tool, bool last_in_lay
if (m_current_tool < m_used_filament_length.size())
m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
ToolChangeResult result;
ToolChangeResult result;
result.priming = false;
result.initial_tool = int(old_tool);
result.new_tool = int(m_current_tool);
@ -806,7 +806,7 @@ WipeTower::ToolChangeResult WipeTower::toolchange_Brim(bool sideOnly, float y_of
if (m_current_tool < m_used_filament_length.size())
m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
ToolChangeResult result;
ToolChangeResult result;
result.priming = false;
result.initial_tool = int(old_tool);
result.new_tool = int(m_current_tool);
@ -1163,7 +1163,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer()
writer.extrude(box.rd.x() - m_perimeter_width / 2.f, writer.y() + 0.5f * step);
writer.extrude(box.ld.x() + m_perimeter_width / 2.f, writer.y());
}
writer.travel(box.rd.x()-m_perimeter_width/2.f,writer.y()); // wipe the nozzle
writer.travel(box.rd.x()-m_perimeter_width/2.f,writer.y()); // wipe the nozzle
}
else { // Extrude a sparse infill to support the material to be printed above.
const float dy = (fill_box.lu.y() - fill_box.ld.y() - m_perimeter_width);
@ -1196,7 +1196,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer()
if (m_current_tool < m_used_filament_length.size())
m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length();
ToolChangeResult result;
ToolChangeResult result;
result.priming = false;
result.initial_tool = int(old_tool);
result.new_tool = int(m_current_tool);

View file

@ -144,7 +144,7 @@ void LayerRegion::process_external_surfaces(const Layer *lower_layer, const Poly
}
if (! lower_layer_covered->empty())
voids = diff(voids, *lower_layer_covered);
fill_boundaries = diff(fill_boundaries, voids);
fill_boundaries = diff(fill_boundaries, voids);
}
}
@ -473,4 +473,4 @@ void LayerRegion::export_region_fill_surfaces_to_svg_debug(const char *name) con
}
}

View file

@ -1462,7 +1462,7 @@ stl_stats ModelObject::get_object_stl_stats() const
return this->volumes[0]->mesh().stl.stats;
stl_stats full_stats;
memset(&full_stats, 0, sizeof(stl_stats));
full_stats.volume = 0.f;
// fill full_stats from all objet's meshes
for (ModelVolume* volume : this->volumes)

View file

@ -252,7 +252,7 @@ bool Print::is_step_done(PrintObjectStep step) const
{
if (m_objects.empty())
return false;
tbb::mutex::scoped_lock lock(this->state_mutex());
tbb::mutex::scoped_lock lock(this->state_mutex());
for (const PrintObject *object : m_objects)
if (! object->is_step_done_unguarded(step))
return false;

View file

@ -1480,7 +1480,7 @@ SlicingParameters PrintObject::slicing_parameters(const DynamicPrintConfig& full
if (object_max_z <= 0.f)
object_max_z = (float)model_object.raw_bounding_box().size().z();
return SlicingParameters::create_from_config(print_config, object_config, object_max_z, object_extruders);
return SlicingParameters::create_from_config(print_config, object_config, object_max_z, object_extruders);
}
// returns 0-based indices of extruders used to print the object (without brim, support and other helper extrusions)

View file

@ -783,7 +783,7 @@ namespace SupportMaterialInternal {
for (const ExtrusionPath &ep : loop.paths)
if (ep.role() == erOverhangPerimeter && ! ep.polyline.empty())
return ep.size() >= (ep.is_closed() ? 3 : 2);
return false;
return false;
}
static bool has_bridging_perimeters(const ExtrusionEntityCollection &perimeters)
{
@ -2125,7 +2125,7 @@ void PrintObjectSupportMaterial::trim_support_layers_by_object(
}
// $layer->slices contains the full shape of layer, thus including
// perimeter's width. $support contains the full shape of support
// material, thus including the width of its foremost extrusion.
// material, thus including the width of its foremost extrusion.
// We leave a gap equal to a full extrusion width.
support_layer.polygons = diff(support_layer.polygons, polygons_trimming);
}
@ -2934,20 +2934,13 @@ void PrintObjectSupportMaterial::generate_toolpaths(
// Prepare fillers.
SupportMaterialPattern support_pattern = m_object_config->support_material_pattern;
bool with_sheath = m_object_config->support_material_with_sheath;
InfillPattern infill_pattern;
InfillPattern infill_pattern = (support_pattern == smpHoneycomb ? ipHoneycomb : ipRectilinear);
std::vector<float> angles;
angles.push_back(base_angle);
switch (support_pattern) {
case smpRectilinearGrid:
if (support_pattern == smpRectilinearGrid)
angles.push_back(interface_angle);
// fall through
case smpRectilinear:
infill_pattern = ipRectilinear;
break;
case smpHoneycomb:
infill_pattern = ipHoneycomb;
break;
}
BoundingBox bbox_object(Point(-scale_(1.), -scale_(1.0)), Point(scale_(1.), scale_(1.)));
// const coordf_t link_max_length_factor = 3.;
@ -3217,7 +3210,7 @@ void PrintObjectSupportMaterial::generate_toolpaths(
density = 0.5f;
flow = m_first_layer_flow;
// use the proper spacing for first layer as we don't need to align
// its pattern to the other layers
// its pattern to the other layers
//FIXME When paralellizing, each thread shall have its own copy of the fillers.
filler->spacing = flow.spacing();
filler->link_max_length = coord_t(scale_(filler->spacing * link_max_length_factor / density));

View file

@ -342,7 +342,7 @@ static void copy_config_dir_single_level(const boost::filesystem::path &path_src
! boost::filesystem::create_directory(path_dst))
throw std::runtime_error(std::string("Slic3r was unable to create a directory at ") + path_dst.string());
for (auto &dir_entry : boost::filesystem::directory_iterator(path_src))
for (auto &dir_entry : boost::filesystem::directory_iterator(path_src))
if (Slic3r::is_ini_file(dir_entry))
boost::filesystem::copy_file(dir_entry.path(), path_dst / dir_entry.path().filename(), boost::filesystem::copy_option::overwrite_if_exists);
}
@ -351,7 +351,7 @@ static void delete_existing_ini_files(const boost::filesystem::path &path)
{
if (! boost::filesystem::is_directory(path))
return;
for (auto &dir_entry : boost::filesystem::directory_iterator(path))
for (auto &dir_entry : boost::filesystem::directory_iterator(path))
if (boost::filesystem::is_regular_file(dir_entry.status()) && boost::algorithm::iends_with(dir_entry.path().filename().string(), ".ini"))
boost::filesystem::remove(dir_entry.path());
}
@ -378,7 +378,7 @@ const Snapshot& SnapshotDB::take_snapshot(const AppConfig &app_config, Snapshot:
sprintf(name, "filament_%u", i);
if (! app_config.has("presets", name))
break;
snapshot.filaments.emplace_back(app_config.get("presets", name));
snapshot.filaments.emplace_back(app_config.get("presets", name));
}
// Vendor specific config bundles and installed printers.
for (const std::pair<std::string, std::map<std::string, std::set<std::string>>> &vendor : app_config.vendors()) {
@ -417,7 +417,7 @@ const Snapshot& SnapshotDB::take_snapshot(const AppConfig &app_config, Snapshot:
// Backup the presets.
for (const char *subdir : { "print", "filament", "printer", "vendor" })
copy_config_dir_single_level(data_dir / subdir, snapshot_dir / subdir);
snapshot.save_ini((snapshot_dir / "snapshot.ini").string());
snapshot.save_ini((snapshot_dir / "snapshot.ini").string());
assert(m_snapshots.empty() || m_snapshots.back().time_captured <= snapshot.time_captured);
m_snapshots.emplace_back(std::move(snapshot));
return m_snapshots.back();

View file

@ -227,9 +227,9 @@ size_t Index::load(const boost::filesystem::path &path)
// End of semver or keyword.
break;
}
if (*key_end != 0 && *key_end != ' ' && *key_end != '\t' && *key_end != '=')
if (*key_end != 0 && *key_end != ' ' && *key_end != '\t' && *key_end != '=')
throw file_parser_error("Invalid keyword or semantic version", path, idx_line);
char *value = left_trim(key_end);
char *value = left_trim(key_end);
bool key_value_pair = *value == '=';
if (key_value_pair)
value = left_trim(value + 1);
@ -245,11 +245,11 @@ size_t Index::load(const boost::filesystem::path &path)
if (strcmp(key, "min_slic3r_version") == 0 || strcmp(key, "max_slic3r_version") == 0) {
if (! svalue.empty())
semver = Semver::parse(svalue);
if (! semver)
if (! semver)
throw file_parser_error(std::string(key) + " must referece a valid semantic version", path, idx_line);
if (strcmp(key, "min_slic3r_version") == 0)
if (strcmp(key, "min_slic3r_version") == 0)
ver.min_slic3r_version = *semver;
else
else
ver.max_slic3r_version = *semver;
} else {
// Ignore unknown keys, as there may come new keys in the future.

View file

@ -455,7 +455,7 @@ void BedShapePanel::update_shape()
else if (page_idx == SHAPE_CUSTOM)
m_shape = m_loaded_shape;
update_preview();
update_preview();
}
// Loads an stl file, projects it to the XY plane and calculates a polygon.

View file

@ -1225,13 +1225,16 @@ bool ConfigWizard::run(PresetBundle *preset_bundle, const PresetUpdater *updater
const wxString& ConfigWizard::name(const bool from_menu/* = false*/)
{
// A different naming convention is used for the Wizard on Windows vs. OSX & GTK.
// A different naming convention is used for the Wizard on Windows & GTK vs. OSX.
// Note: Don't call _() macro here.
// This function just return the current name according to the OS.
// Translation is implemented inside GUI_App::add_config_menu()
#if __APPLE__
static const wxString config_wizard_name = _(L("Configuration Assistant"));
static const wxString config_wizard_name_menu = _(L("Configuration &Assistant"));
static const wxString config_wizard_name = L("Configuration Assistant");
static const wxString config_wizard_name_menu = L("Configuration &Assistant");
#else
static const wxString config_wizard_name = _(L("Configuration Wizard"));
static const wxString config_wizard_name_menu = _(L("Configuration &Wizard"));
static const wxString config_wizard_name = L("Configuration Wizard");
static const wxString config_wizard_name_menu = L("Configuration &Wizard");
#endif
return from_menu ? config_wizard_name_menu : config_wizard_name;
}

View file

@ -928,8 +928,8 @@ bool GLCanvas3D::LegendTexture::generate(const GCodePreviewData& preview_data, c
if (items_count > 1)
m_original_height += (items_count - 1) * scaled_square_contour;
m_width = (int)next_highest_power_of_2((uint32_t)m_original_width);
m_height = (int)next_highest_power_of_2((uint32_t)m_original_height);
m_width = (int)next_highest_power_of_2((uint32_t)m_original_width);
m_height = (int)next_highest_power_of_2((uint32_t)m_original_height);
// generates bitmap
wxBitmap bitmap(m_width, m_height);
@ -1882,7 +1882,7 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re
if (m_reload_delayed)
return;
bool update_object_list = false;
bool update_object_list = false;
if (m_volumes.volumes != glvolumes_new)
update_object_list = true;
@ -5070,14 +5070,14 @@ void GLCanvas3D::_load_gcode_extrusion_paths(const GCodePreviewData& preview_dat
for (const GCodePreviewData::Extrusion::Layer &layer : preview_data.extrusion.layers)
for (const ExtrusionPath &path : layer.paths)
++ num_paths_per_role[size_t(path.role())];
std::vector<std::vector<float>> roles_values;
std::vector<std::vector<float>> roles_values;
roles_values.assign(size_t(erCount), std::vector<float>());
for (size_t i = 0; i < roles_values.size(); ++ i)
roles_values[i].reserve(num_paths_per_role[i]);
for (const GCodePreviewData::Extrusion::Layer& layer : preview_data.extrusion.layers)
for (const GCodePreviewData::Extrusion::Layer& layer : preview_data.extrusion.layers)
for (const ExtrusionPath& path : layer.paths)
roles_values[size_t(path.role())].emplace_back(Helper::path_filter(preview_data.extrusion.view_type, path));
roles_filters.reserve(size_t(erCount));
roles_filters.reserve(size_t(erCount));
size_t num_buffers = 0;
for (std::vector<float> &values : roles_values) {
sort_remove_duplicates(values);

View file

@ -125,7 +125,7 @@ void config_wizard(int reason)
if (! wxGetApp().check_unsaved_changes())
return;
try {
try {
ConfigWizard wizard(nullptr, static_cast<ConfigWizard::RunReason>(reason));
wizard.run(wxGetApp().preset_bundle, wxGetApp().preset_updater);
}

View file

@ -725,7 +725,7 @@ bool GUI_App::load_language(wxString language, bool initial)
#endif
if (initial)
message + "\n\nApplication will close.";
wxMessageBox(message, "PrusaSlicer - Switching language failed", wxOK | wxICON_ERROR);
wxMessageBox(message, "PrusaSlicer - Switching language failed", wxOK | wxICON_ERROR);
if (initial)
std::exit(EXIT_FAILURE);
else

View file

@ -753,9 +753,9 @@ void ObjectList::paste_volumes_into_list(int obj_idx, const ModelVolumePtrs& vol
}
select_items(items);
#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
//#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
selection_changed();
#endif //no __WXOSX__ //__WXMSW__
//#endif //no __WXOSX__ //__WXMSW__
}
void ObjectList::paste_objects_into_list(const std::vector<size_t>& object_idxs)
@ -773,9 +773,9 @@ void ObjectList::paste_objects_into_list(const std::vector<size_t>& object_idxs)
wxGetApp().plater()->changed_objects(object_idxs);
select_items(items);
#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
//#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
selection_changed();
#endif //no __WXOSX__ //__WXMSW__
//#endif //no __WXOSX__ //__WXMSW__
}
#ifdef __WXOSX__
@ -815,7 +815,9 @@ void ObjectList::list_manipulation(bool evt_context_menu/* = false*/)
if (col == nullptr) {
if (wxOSX)
UnselectAll();
else
else if (!evt_context_menu)
// Case, when last item was deleted and under GTK was called wxEVT_DATAVIEW_SELECTION_CHANGED,
// which invoked next list_manipulation(false)
return;
}
@ -1720,9 +1722,9 @@ void ObjectList::load_subobject(ModelVolumeType type)
if (sel_item)
select_item(sel_item);
#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
//#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
selection_changed();
#endif //no __WXOSX__ //__WXMSW__
//#endif //no __WXOSX__ //__WXMSW__
}
void ObjectList::load_part( ModelObject* model_object,
@ -1858,9 +1860,9 @@ void ObjectList::load_generic_subobject(const std::string& type_name, const Mode
const auto object_item = m_objects_model->GetTopParent(GetSelection());
select_item(m_objects_model->AddVolumeChild(object_item, name, type,
new_volume->get_mesh_errors_count()>0));
#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
//#ifndef __WXOSX__ //#ifdef __WXMSW__ // #ys_FIXME
selection_changed();
#endif //no __WXOSX__ //__WXMSW__
//#endif //no __WXOSX__ //__WXMSW__
}
void ObjectList::load_shape_object(const std::string& type_name)
@ -1899,6 +1901,9 @@ void ObjectList::load_shape_object(const std::string& type_name)
new_volume->config.set_key_value("extruder", new ConfigOptionInt(0));
new_object->invalidate_bounding_box();
new_object->center_around_origin();
new_object->ensure_on_bed();
const BoundingBoxf bed_shape = wxGetApp().plater()->bed_shape_bb();
new_object->instances[0]->set_offset(Slic3r::to_3d(bed_shape.center().cast<double>(), -new_object->origin_translation(2)));

View file

@ -252,7 +252,7 @@ void GLGizmoSlaSupports::render_points(const Selection& selection, bool picking)
const sla::SupportPoint& support_point = m_editing_mode ? m_editing_cache[i].support_point : m_normal_cache[i];
const bool& point_selected = m_editing_mode ? m_editing_cache[i].selected : false;
if (is_point_clipped(support_point.pos.cast<double>()))
if (is_mesh_point_clipped(support_point.pos.cast<double>()))
continue;
// First decide about the color of the point.
@ -335,14 +335,14 @@ void GLGizmoSlaSupports::render_points(const Selection& selection, bool picking)
bool GLGizmoSlaSupports::is_point_clipped(const Vec3d& point) const
bool GLGizmoSlaSupports::is_mesh_point_clipped(const Vec3d& point) const
{
if (m_clipping_plane_distance == 0.f)
return false;
Vec3d transformed_point = m_model_object->instances.front()->get_transformation().get_matrix() * point;
transformed_point(2) += m_z_shift;
return m_clipping_plane->distance(transformed_point) < 0.;
return m_clipping_plane->is_point_clipped(transformed_point);
}
@ -391,27 +391,15 @@ bool GLGizmoSlaSupports::unproject_on_mesh(const Vec2d& mouse_pos, std::pair<Vec
trafo.set_offset(trafo.get_offset() + Vec3d(0., 0., m_z_shift));
// The raycaster query
std::vector<Vec3f> hits;
std::vector<Vec3f> normals;
m_mesh_raycaster->unproject_on_mesh(mouse_pos, trafo.get_matrix(), camera, &hits, &normals);
// We must also take care of the clipping plane (if active)
unsigned i = 0;
if (m_clipping_plane_distance != 0.f) {
for (i=0; i<hits.size(); ++i)
if (! is_point_clipped(hits[i].cast<double>()))
break;
Vec3f hit;
Vec3f normal;
if (m_mesh_raycaster->unproject_on_mesh(mouse_pos, trafo.get_matrix(), camera, hit, normal, m_clipping_plane.get())) {
// Return both the point and the facet normal.
pos_and_normal = std::make_pair(hit, normal);
return true;
}
if (i==hits.size() || (hits.size()-i) % 2 != 0) {
// All hits are either clipped, or there is an odd number of unclipped
// hits - meaning the nearest must be from inside the mesh.
else
return false;
}
// Calculate and return both the point and the facet normal.
pos_and_normal = std::make_pair(hits[i], normals[i]);
return true;
}
// Following function is called from GLCanvas3D to inform the gizmo about a mouse/keyboard event.
@ -481,19 +469,15 @@ bool GLGizmoSlaSupports::gizmo_event(SLAGizmoEventType action, const Vec2d& mous
std::vector<Vec3f> points_inside;
std::vector<unsigned int> points_idxs = m_selection_rectangle.stop_dragging(m_parent, points);
for (size_t idx : points_idxs)
points_inside.push_back((trafo.get_matrix() * points[idx]).cast<float>());
points_inside.push_back(points[idx].cast<float>());
// Only select/deselect points that are actually visible
for (size_t idx : m_mesh_raycaster->get_unobscured_idxs(trafo, m_parent.get_camera(), points_inside,
[this](const Vec3f& pt) { return is_point_clipped(pt.cast<double>()); }))
for (size_t idx : m_mesh_raycaster->get_unobscured_idxs(trafo, m_parent.get_camera(), points_inside, m_clipping_plane.get()))
{
const sla::SupportPoint &support_point = m_editing_cache[points_idxs[idx]].support_point;
if (! is_point_clipped(support_point.pos.cast<double>())) {
if (rectangle_status == GLSelectionRectangle::Deselect)
unselect_point(points_idxs[idx]);
else
select_point(points_idxs[idx]);
}
if (rectangle_status == GLSelectionRectangle::Deselect)
unselect_point(points_idxs[idx]);
else
select_point(points_idxs[idx]);
}
return true;
}

View file

@ -125,7 +125,7 @@ private:
mutable std::unique_ptr<MeshClipper> m_supports_clipper;
std::vector<const ConfigOption*> get_config_options(const std::vector<std::string>& keys) const;
bool is_point_clipped(const Vec3d& point) const;
bool is_mesh_point_clipped(const Vec3d& point) const;
//void find_intersecting_facets(const igl::AABB<Eigen::MatrixXf, 3>* aabb, const Vec3f& normal, double offset, std::vector<unsigned int>& out) const;
// Methods that do the model_object and editing cache synchronization,

View file

@ -192,7 +192,7 @@ ConfigOptionsGroupShp LambdaObjectDialog::init_modificator_options_page(const wx
else
panel->SetSizer(optgroup->sizer);
return optgroup;
return optgroup;
}

View file

@ -917,7 +917,7 @@ void MainFrame::load_config_file()
wxString file;
if (dlg.ShowModal() == wxID_OK)
file = dlg.GetPath();
if (! file.IsEmpty() && this->load_config_file(file.ToUTF8().data())) {
if (! file.IsEmpty() && this->load_config_file(file.ToUTF8().data())) {
wxGetApp().app_config->update_config_dir(get_dir_name(file));
m_last_config = file;
}

View file

@ -152,8 +152,8 @@ Vec3f MeshRaycaster::AABBWrapper::get_hit_normal(const igl::Hit& hit) const
}
bool MeshRaycaster::unproject_on_mesh(const Vec2d& mouse_pos, const Transform3d& trafo,
const Camera& camera, std::vector<Vec3f>* positions, std::vector<Vec3f>* normals) const
bool MeshRaycaster::unproject_on_mesh(const Vec2d& mouse_pos, const Transform3d& trafo, const Camera& camera,
Vec3f& position, Vec3f& normal, const ClippingPlane* clipping_plane) const
{
const std::array<int, 4>& viewport = camera.get_viewport();
const Transform3d& model_mat = camera.get_view_matrix();
@ -179,25 +179,30 @@ bool MeshRaycaster::unproject_on_mesh(const Vec2d& mouse_pos, const Transform3d&
std::sort(hits.begin(), hits.end(), [](const igl::Hit& a, const igl::Hit& b) { return a.t < b.t; });
// Now stuff the points in the provided vector and calculate normals if asked about them:
if (positions != nullptr) {
positions->clear();
if (normals != nullptr)
normals->clear();
for (const igl::Hit& hit : hits) {
positions->push_back(m_AABB_wrapper->get_hit_pos(hit));
unsigned i = 0;
if (normals != nullptr)
normals->push_back(m_AABB_wrapper->get_hit_normal(hit));
// Remove points that are obscured or cut by the clipping plane
if (clipping_plane) {
for (i=0; i<hits.size(); ++i)
if (! clipping_plane->is_point_clipped(trafo * m_AABB_wrapper->get_hit_pos(hits[i]).cast<double>()))
break;
if (i==hits.size() || (hits.size()-i) % 2 != 0) {
// All hits are either clipped, or there is an odd number of unclipped
// hits - meaning the nearest must be from inside the mesh.
return false;
}
}
// Now stuff the points in the provided vector and calculate normals if asked about them:
position = m_AABB_wrapper->get_hit_pos(hits[i]);
normal = m_AABB_wrapper->get_hit_normal(hits[i]);
return true;
}
std::vector<unsigned> MeshRaycaster::get_unobscured_idxs(const Geometry::Transformation& trafo, const Camera& camera, const std::vector<Vec3f>& points,
std::function<bool(const Vec3f&)> fn_ignore_hit) const
const ClippingPlane* clipping_plane) const
{
std::vector<unsigned> out;
@ -206,19 +211,24 @@ std::vector<unsigned> MeshRaycaster::get_unobscured_idxs(const Geometry::Transfo
Vec3f direction_to_camera_mesh = (instance_matrix_no_translation_no_scaling.inverse().cast<float>() * direction_to_camera).normalized().eval();
Vec3f scaling = trafo.get_scaling_factor().cast<float>();
direction_to_camera_mesh = Vec3f(direction_to_camera_mesh(0)*scaling(0), direction_to_camera_mesh(1)*scaling(1), direction_to_camera_mesh(2)*scaling(2));
const Transform3f inverse_trafo = trafo.get_matrix().inverse().cast<float>();
for (size_t i=0; i<points.size(); ++i) {
const Vec3f& pt = points[i];
if (clipping_plane && clipping_plane->is_point_clipped(pt.cast<double>()))
continue;
bool is_obscured = false;
// Cast a ray in the direction of the camera and look for intersection with the mesh:
std::vector<igl::Hit> hits;
// Offset the start of the ray to the front of the ball + EPSILON to account for numerical inaccuracies.
// Offset the start of the ray by EPSILON to account for numerical inaccuracies.
if (m_AABB_wrapper->m_AABB.intersect_ray(
AABBWrapper::MapMatrixXfUnaligned(m_mesh->its.vertices.front().data(), m_mesh->its.vertices.size(), 3),
AABBWrapper::MapMatrixXiUnaligned(m_mesh->its.indices.front().data(), m_mesh->its.indices.size(), 3),
pt + direction_to_camera_mesh * EPSILON, direction_to_camera_mesh, hits)) {
inverse_trafo * pt + direction_to_camera_mesh * EPSILON, direction_to_camera_mesh, hits)) {
std::sort(hits.begin(), hits.end(), [](const igl::Hit& h1, const igl::Hit& h2) { return h1.t < h2.t; });
// If the closest hit facet normal points in the same direction as the ray,
// we are looking through the mesh and should therefore discard the point:
if (m_AABB_wrapper->get_hit_normal(hits.front()).dot(direction_to_camera_mesh) > 0.f)
@ -227,11 +237,12 @@ std::vector<unsigned> MeshRaycaster::get_unobscured_idxs(const Geometry::Transfo
// Eradicate all hits that the caller wants to ignore
for (unsigned j=0; j<hits.size(); ++j) {
const igl::Hit& hit = hits[j];
if (fn_ignore_hit(m_AABB_wrapper->get_hit_pos(hit))) {
if (clipping_plane && clipping_plane->is_point_clipped(trafo.get_matrix() * m_AABB_wrapper->get_hit_pos(hit).cast<double>())) {
hits.erase(hits.begin()+j);
--j;
}
}
// FIXME: the intersection could in theory be behind the camera, but as of now we only have camera direction.
// Also, the threshold is in mesh coordinates, not in actual dimensions.
if (! hits.empty())

View file

@ -50,6 +50,7 @@ public:
return (-get_normal().dot(pt) + m_data[3]);
}
bool is_point_clipped(const Vec3d& point) const { return distance(point) < 0.; }
void set_normal(const Vec3d& normal) { for (size_t i=0; i<3; ++i) m_data[i] = normal(i); }
void set_offset(double offset) { m_data[3] = offset; }
Vec3d get_normal() const { return Vec3d(m_data[0], m_data[1], m_data[2]); }
@ -98,10 +99,10 @@ public:
void set_camera(const Camera& camera);
bool unproject_on_mesh(const Vec2d& mouse_pos, const Transform3d& trafo, const Camera& camera,
std::vector<Vec3f>* positions = nullptr, std::vector<Vec3f>* normals = nullptr) const;
Vec3f& position, Vec3f& normal, const ClippingPlane* clipping_plane = nullptr) const;
std::vector<unsigned> get_unobscured_idxs(const Geometry::Transformation& trafo, const Camera& camera,
const std::vector<Vec3f>& points, std::function<bool(const Vec3f&)> fn_ignore_hit) const;
const std::vector<Vec3f>& points, const ClippingPlane* clipping_plane = nullptr) const;
Vec3f get_closest_point(const Vec3f& point, Vec3f* normal = nullptr) const;

View file

@ -133,7 +133,7 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n
m_options_mode.push_back(option_set[0].opt.mode);
// if we have a single option with no label, no sidetext just add it directly to sizer
if (option_set.size() == 1 && label_width == 0 && option_set.front().opt.full_width &&
if (option_set.size() == 1 && label_width == 0 && option_set.front().opt.full_width &&
option_set.front().opt.label.empty() &&
option_set.front().opt.sidetext.size() == 0 && option_set.front().side_widget == nullptr &&
line.get_extra_widgets().size() == 0) {

View file

@ -4288,11 +4288,10 @@ void Plater::increase_instances(size_t num)
sidebar().obj_list()->increase_object_instances(obj_idx, was_one_instance ? num + 1 : num);
if (p->get_config("autocenter") == "1") {
if (p->get_config("autocenter") == "1")
p->arrange();
} else {
p->update();
}
p->update();
p->get_selection().add_instance(obj_idx, (int)model_object->instances.size() - 1);

View file

@ -279,7 +279,7 @@ std::string PresetBundle::load_system_presets()
errors_cummulative += "\n";
}
}
if (first) {
if (first) {
// No config bundle loaded, reset.
this->reset(false);
}

View file

@ -410,7 +410,7 @@ void Selection::set_deserialized(EMode mode, const std::vector<std::pair<size_t,
if (! m_valid)
return;
m_mode = mode;
m_mode = mode;
for (unsigned int i : m_list)
(*m_volumes)[i]->selected = false;
m_list.clear();

View file

@ -371,7 +371,7 @@ void WipingPanel::toggle_advanced(bool user_action) {
else
m_advanced = !advanced_matches_simple(); // if called from constructor, show what is appropriate
(m_advanced ? m_page_advanced : m_page_simple)->Show();
(m_advanced ? m_page_advanced : m_page_simple)->Show();
(!m_advanced ? m_page_advanced : m_page_simple)->Hide();
m_widget_button->SetLabel(m_advanced ? _(L("Show simplified settings")) : _(L("Show advanced settings")));

View file

@ -669,7 +669,7 @@ wxDataViewItem ObjectDataViewModel::Add(const wxString &name,
if (has_errors)
root->m_bmp = *m_warning_bmp;
m_objects.push_back(root);
m_objects.push_back(root);
// notify control
wxDataViewItem child((void*)root);
wxDataViewItem parent((void*)NULL);
@ -720,7 +720,7 @@ wxDataViewItem ObjectDataViewModel::AddVolumeChild( const wxDataViewItem &parent
root->SetBitmap(*m_warning_bmp);
// notify control
const wxDataViewItem child((void*)node);
const wxDataViewItem child((void*)node);
ItemAdded(parent_item, child);
root->m_volumes_cnt++;