3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Reworked the "new" bridging to respect the bridge_flow_ratio

Browse source 
by maintaining extrusion spacing, but modifying the extrusion width
and / or height.
This commit is contained in:
Vojtech Bubnik 2021-03-09 12:30:31 +01:00
parent 8e27e355c2
commit f01f02154c
12 changed files with 173 additions and 134 deletions
src/libslic3r/Fill
Fill.cpp

33
src/libslic3r/Fill/Fill.cpp
View file

@ -28,6 +28,8 @@ struct SurfaceFillParams
// coordf_t overlap = 0.;
// Angle as provided by the region config, in radians.
float angle = 0.f;
// Is bridging used for this fill? Bridging parameters may be used even if this->flow.bridge() is not set.
bool bridge;
// Non-negative for a bridge.
float bridge_angle = 0.f;
@ -73,18 +75,19 @@ struct SurfaceFillParams
RETURN_COMPARE_NON_EQUAL(flow.width());
RETURN_COMPARE_NON_EQUAL(flow.height());
RETURN_COMPARE_NON_EQUAL(flow.nozzle_diameter());
RETURN_COMPARE_NON_EQUAL_TYPED(unsigned, flow.bridge());
RETURN_COMPARE_NON_EQUAL_TYPED(unsigned, bridge);
RETURN_COMPARE_NON_EQUAL_TYPED(unsigned, extrusion_role);
return false;
}
bool operator==(const SurfaceFillParams &rhs) const {
return this->extruder == rhs.extruder &&
this->pattern == rhs.pattern &&
this->pattern == rhs.pattern &&
this->spacing == rhs.spacing &&
// this->overlap == rhs.overlap &&
this->angle == rhs.angle &&
this->bridge == rhs.bridge &&
// this->bridge_angle == rhs.bridge_angle &&
this->density == rhs.density &&
// this->dont_adjust == rhs.dont_adjust &&
this->anchor_length == rhs.anchor_length &&
@ -128,6 +131,7 @@ std::vector<SurfaceFill> group_fills(const Layer &layer)
if (surface.is_solid()) {
params.density = 100.f;
//FIXME for non-thick bridges, shall we allow a bottom surface pattern?
params.pattern = (surface.is_external() && ! is_bridge) ?
(surface.is_top() ? region_config.top_fill_pattern.value : region_config.bottom_fill_pattern.value) :
region_config.top_fill_pattern == ipMonotonic ? ipMonotonic : ipRectilinear;
@ -144,9 +148,10 @@ std::vector<SurfaceFill> group_fills(const Layer &layer)
params.angle = float(Geometry::deg2rad(region_config.fill_angle.value));
// Calculate the actual flow we'll be using for this infill.
params.flow = is_bridge || Fill::use_bridge_flow(params.pattern) ?
params.bridge = is_bridge || Fill::use_bridge_flow(params.pattern);
params.flow = params.bridge ?
layerm.bridging_flow(extrusion_role) :
layerm.region()->flow(*layer.object(), extrusion_role, (surface.thickness == -1) ? layer.height : surface.thickness, layer.id() == 0);
layerm.flow(extrusion_role, (surface.thickness == -1) ? layer.height : surface.thickness);
// Calculate flow spacing for infill pattern generation.
if (surface.is_solid() || is_bridge) {
@ -159,7 +164,7 @@ std::vector<SurfaceFill> group_fills(const Layer &layer)
// for all layers, for avoiding the ugly effect of
// misaligned infill on first layer because of different extrusion width and
// layer height
params.spacing = layerm.region()->flow(*layer.object(), frInfill, layer.object()->config().layer_height).spacing();
params.spacing = layerm.flow(frInfill, layer.object()->config().layer_height).spacing();
// Anchor a sparse infill to inner perimeters with the following anchor length:
params.anchor_length = float(region_config.infill_anchor);
if (region_config.infill_anchor.percent)
@ -278,7 +283,7 @@ std::vector<SurfaceFill> group_fills(const Layer &layer)
params.extrusion_role = erInternalInfill;
params.angle = float(Geometry::deg2rad(layerm.region()->config().fill_angle.value));
// calculate the actual flow we'll be using for this infill
params.flow = layerm.region()->flow(*layer.object(), frSolidInfill, layer.height, layer.id() == 0);
params.flow = layerm.flow(frSolidInfill);
params.spacing = params.flow.spacing();
surface_fills.emplace_back(params);
surface_fills.back().surface.surface_type = stInternalSolid;
@ -346,9 +351,9 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
f->adapt_fill_octree = (surface_fill.params.pattern == ipSupportCubic) ? support_fill_octree : adaptive_fill_octree;
// calculate flow spacing for infill pattern generation
bool using_internal_flow = ! surface_fill.surface.is_solid() && ! surface_fill.params.flow.bridge();
bool using_internal_flow = ! surface_fill.surface.is_solid() && ! surface_fill.params.bridge;
double link_max_length = 0.;
if (! surface_fill.params.flow.bridge()) {
if (! surface_fill.params.bridge) {
#if 0
link_max_length = layerm.region()->config().get_abs_value(surface.is_external() ? "external_fill_link_max_length" : "fill_link_max_length", flow.spacing());
// printf("flow spacing: %f, is_external: %d, link_max_length: %lf\n", flow.spacing(), int(surface.is_external()), link_max_length);
@ -389,9 +394,7 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
// so we can safely ignore the slight variation that might have
// been applied to f->spacing
} else {
Flow new_flow = surface_fill.params.flow.bridge() ?
Flow::bridging_flow_from_spacing(float(f->spacing), surface_fill.params.flow.nozzle_diameter()) :
Flow::new_from_spacing(float(f->spacing), surface_fill.params.flow.nozzle_diameter(), surface_fill.params.flow.height());
Flow new_flow = surface_fill.params.flow.with_spacing(float(f->spacing));
flow_mm3_per_mm = new_flow.mm3_per_mm();
flow_width = new_flow.width();
}
@ -601,9 +604,9 @@ void Layer::make_ironing()
fill.spacing = ironing_params.line_spacing;
fill.angle = float(ironing_params.angle + 0.25 * M_PI);
fill.link_max_length = (coord_t)scale_(3. * fill.spacing);
double height = ironing_params.height * fill.spacing / nozzle_dmr;
Flow flow = Flow::new_from_spacing(float(nozzle_dmr), 0., float(height));
double flow_mm3_per_mm = flow.mm3_per_mm();
double extrusion_height = ironing_params.height * fill.spacing / nozzle_dmr;
float extrusion_width = Flow::rounded_rectangle_extrusion_width_from_spacing(float(nozzle_dmr), float(extrusion_height));
double flow_mm3_per_mm = nozzle_dmr * extrusion_height;
Surface surface_fill(stTop, ExPolygon());
for (ExPolygon &expoly : ironing_areas) {
surface_fill.expolygon = std::move(expoly);
@ -621,7 +624,7 @@ void Layer::make_ironing()
extrusion_entities_append_paths(
eec->entities, std::move(polylines),
erIroning,
flow_mm3_per_mm, float(flow.width()), float(height));
flow_mm3_per_mm, extrusion_width, float(extrusion_height));
}
}
}