Update Anycubic i3 Mega (S) profile
- revert retraction settings as the previous change causes issues with stringing. - sync many settings with Prusa MK2 profile and some with Prusa MK3 profile. - remove no longer needed SUPPORTED print settings. Support settings can now be selected directly in the PrusaSlicer menu. - add DAS FILAMENT PETG profile.
This commit is contained in:
Maximilian Engelhardt
parent
b2bcf17dfa
commit
f4b9d535de
@ -828,34 +828,35 @@ end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_acceleration = 1000
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 30
|
||||
bridge_speed = 25
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ and nozzle_diameter[0]==0.4
|
||||
default_acceleration = 1000
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 25
|
||||
external_perimeter_speed = 40
|
||||
extruder_clearance_height = 35
|
||||
extruder_clearance_radius = 60
|
||||
extrusion_width = 0.45
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_acceleration = 800
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 1
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
infill_acceleration = 1000
|
||||
infill_anchor = 2.5
|
||||
infill_anchor_max = 12
|
||||
infill_extrusion_width = 0.45
|
||||
max_print_speed = 200
|
||||
max_print_speed = 100
|
||||
min_skirt_length = 4
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 45
|
||||
perimeter_speed = 50
|
||||
perimeters = 2
|
||||
seam_position = nearest
|
||||
skirt_distance = 2
|
||||
@ -864,25 +865,24 @@ skirts = 1
|
||||
small_perimeter_speed = 25
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 80
|
||||
support_material_buildplate_only = 1
|
||||
solid_infill_speed = 50
|
||||
support_material = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.1
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 80%
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 50
|
||||
support_material_threshold = 55
|
||||
support_material_threshold = 50
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 0
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 5
|
||||
top_solid_min_thickness = 0.6
|
||||
top_solid_min_thickness = 0.7
|
||||
travel_speed = 180
|
||||
|
||||
[print:*supported_mega*]
|
||||
support_material = 1
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.15mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
@ -890,15 +890,14 @@ support_material = 1
|
||||
[print:*0.15mm_mega*]
|
||||
inherits = *common_mega*
|
||||
bottom_solid_layers = 5
|
||||
bridge_flow_ratio = 1
|
||||
infill_speed = 60
|
||||
layer_height = 0.15
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:0.15mm QUALITY @MEGA]
|
||||
inherits = *0.15mm_mega*
|
||||
|
||||
[print:0.15mm QUALITY SUPPORTED @MEGA]
|
||||
inherits = *0.15mm_mega*;*supported_mega*
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
@ -906,15 +905,13 @@ inherits = *0.15mm_mega*;*supported_mega*
|
||||
[print:*0.20mm_mega*]
|
||||
inherits = *common_mega*
|
||||
bottom_solid_layers = 4
|
||||
infill_speed = 60
|
||||
layer_height = 0.2
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:0.20mm QUALITY @MEGA]
|
||||
inherits = *0.20mm_mega*
|
||||
|
||||
[print:0.20mm QUALITY SUPPORTED @MEGA]
|
||||
inherits = *0.20mm_mega*;*supported_mega*
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.30mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
@ -925,12 +922,11 @@ bottom_solid_layers = 4
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 35
|
||||
extrusion_width = 0.5
|
||||
fill_pattern = grid
|
||||
fill_pattern = cubic
|
||||
infill_extrusion_width = 0.5
|
||||
infill_speed = 85
|
||||
layer_height = 0.3
|
||||
perimeter_extrusion_width = 0.5
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 30
|
||||
solid_infill_extrusion_width = 0.5
|
||||
support_material_extrusion_width = 0.38
|
||||
@ -940,9 +936,6 @@ top_solid_layers = 4
|
||||
[print:0.30mm DRAFT @MEGA]
|
||||
inherits = *0.30mm_mega*
|
||||
|
||||
[print:0.30mm DRAFT SUPPORTED @MEGA]
|
||||
inherits = *0.30mm_mega*;*supported_mega*
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- filament ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXXXX
|
||||
@ -1092,6 +1085,14 @@ first_layer_temperature = 215
|
||||
min_fan_speed = 100
|
||||
temperature = 210
|
||||
|
||||
[filament:DAS FILAMENT PETG @MEGA]
|
||||
inherits = *PETG_mega*
|
||||
filament_vendor = DAS FILAMENT
|
||||
bed_temperature = 75
|
||||
first_layer_bed_temperature = 75
|
||||
first_layer_temperature = 220
|
||||
temperature = 225
|
||||
|
||||
[filament:*PLA_mega*]
|
||||
inherits = *common_mega*
|
||||
bed_temperature = 60
|
||||
@ -1166,7 +1167,7 @@ bed_shape = 0x0,210x0,210x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
|
||||
default_filament_profile = Generic PLA @MEGA
|
||||
default_print_profile = 0.15mm QUALITY @MEGA
|
||||
deretract_speed = 40
|
||||
deretract_speed = 50
|
||||
end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
|
||||
extruder_colour = #808080
|
||||
gcode_flavor = marlin
|
||||
@ -1177,10 +1178,10 @@ remaining_times = 1
|
||||
retract_before_travel = 1.5
|
||||
retract_before_wipe = 60%
|
||||
retract_layer_change = 1
|
||||
retract_length = 3.2
|
||||
retract_lift = 0.2
|
||||
retract_length = 6
|
||||
retract_lift = 0.075
|
||||
retract_lift_below = 204
|
||||
retract_speed = 70
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
|
||||
thumbnails = 16x16,220x124
|
||||
|
||||
Loading…
Reference in New Issue
Block a user