Updated Creality resources and profiles

resources/profiles/Creality.idx

@@ -1,4 +1,8 @@
+min_slic3r_version = 2.3.1-beta
+0.0.15 Added new printer models, filament profiles. Various improvements.
 min_slic3r_version = 2.3.0-rc2
+0.0.14 Optimized start g-code. Added filament profile. Various improvements.
+0.0.13 Optimized start and end g-code. General improvements.
 0.0.12 Added Ender-3V2 and filament profiles.
 min_slic3r_version = 2.3.0-beta2
 0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.

resources/profiles/Creality.ini

@@ -5,7 +5,7 @@
 name = Creality
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.12
+config_version = 0.0.15
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -21,16 +21,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
-
-[printer_model:ENDER3V2]
-name = Creality Ender-3V2
-variants = 0.4
-technology = FFF
-family = ENDER
-bed_model = ender3_bed.stl
-bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
 
 [printer_model:ENDER3BLTOUCH]
 name = Creality Ender-3 BLTouch
@@ -39,7 +30,34 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER3V2]
+name = Creality Ender-3 V2
+variants = 0.4
+technology = FFF
+family = ENDER
+bed_model = ender3v2_bed.stl
+bed_texture = ender3v2.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER3MAX]
+name = Creality Ender-3 Max
+variants = 0.4
+technology = FFF
+family = ENDER
+bed_model = cr10v2_bed.stl
+bed_texture = cr10spro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER4]
+name = Creality Ender-4
+variants = 0.4
+technology = FFF
+family = ENDER
+bed_model = ender3v2_bed.stl
+bed_texture = ender3v2.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER5]
 name = Creality Ender-5
@@ -48,7 +66,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER5PLUS]
 name = Creality Ender-5 Plus
@@ -57,7 +75,16 @@ technology = FFF
 family = ENDER
 bed_model = ender5plus_bed.stl
 bed_texture = ender5plus.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER6]
+name = Creality Ender-6
+variants = 0.4
+technology = FFF
+family = ENDER
+bed_model = ender6_bed.stl
+bed_texture = ender6.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER2]
 name = Creality Ender-2
@@ -66,7 +93,43 @@ technology = FFF
 family = ENDER
 bed_model = ender2_bed.stl
 bed_texture = ender2.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR5PRO]
+name = Creality CR-5 Pro
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr5pro_bed.stl
+bed_texture = cr5pro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR5PROH]
+name = Creality CR-5 Pro H
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr5pro_bed.stl
+bed_texture = cr5pro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR6SE]
+name = Creality CR-6 SE
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr6se_bed.stl
+bed_texture = cr6se.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR6MAX]
+name = Creality CR-6 Max
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr10s4_bed.stl
+bed_texture = cr10s4.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10MINI]
 name = Creality CR-10 Mini
@@ -75,7 +138,16 @@ technology = FFF
 family = CR
 bed_model = cr10mini_bed.stl
 bed_texture = cr10mini.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR10MAX]
+name = Creality CR-10 Max
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr10max_bed.stl
+bed_texture = cr10max.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10]
 name = Creality CR-10
@@ -84,7 +156,7 @@ technology = FFF
 family = CR
 bed_model = cr10_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10V2]
 name = Creality CR-10 V2
@@ -93,7 +165,7 @@ technology = FFF
 family = CR
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10V3]
 name = Creality CR-10 V3
@@ -102,7 +174,7 @@ technology = FFF
 family = CR
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S]
 name = Creality CR-10 S
@@ -111,7 +183,7 @@ technology = FFF
 family = CR
 bed_model = cr10_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10SPRO]
 name = Creality CR-10 S Pro
@@ -119,8 +191,8 @@ variants = 0.4
 technology = FFF
 family = CR
 bed_model = cr10v2_bed.stl
-bed_texture = cr10.svg
+bed_texture = cr10spro.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10SPROV2]
 name = Creality CR-10 S Pro V2
@@ -129,7 +201,7 @@ technology = FFF
 family = CR
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S4]
 name = Creality CR-10 S4
@@ -138,7 +210,7 @@ technology = FFF
 family = CR
 bed_model = cr10s4_bed.stl
 bed_texture = cr10s4.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S5]
 name = Creality CR-10 S5
@@ -147,7 +219,7 @@ technology = FFF
 family = CR
 bed_model = cr10s5_bed.stl
 bed_texture = cr10s5.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR20]
 name = Creality CR-20
@@ -156,7 +228,7 @@ technology = FFF
 family = CR
 bed_model = ender3_bed.stl
 bed_texture = cr20.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR20PRO]
 name = Creality CR-20 Pro
@@ -165,7 +237,43 @@ technology = FFF
 family = CR
 bed_model = ender3_bed.stl
 bed_texture = cr20.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR200B]
+name = Creality CR-200B
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr200b_bed.stl
+bed_texture = cr200b.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR8]
+name = Creality CR-8
+variants = 0.4
+technology = FFF
+family = CR
+bed_model = cr8_bed.stl
+bed_texture = cr8.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+#[printer_model:CRX]
+#name = Creality CR-X
+#variants = 0.4
+#technology = FFF
+#family = CR-X
+#bed_model = cr10v2_bed.stl
+#bed_texture = cr10spro.svg
+#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+#[printer_model:CRXPRO]
+#name = Creality CR-X Pro
+#variants = 0.4
+#technology = FFF
+#family = CR-X
+#bed_model = cr10v2_bed.stl
+#bed_texture = cr10spro.svg
+#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
@@ -173,6 +281,7 @@ default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG
 # Common print preset
 [print:*common*]
 avoid_crossing_perimeters = 0
+bridge_acceleration = 250
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 25
@@ -180,6 +289,7 @@ brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 complete_objects = 0
+default_acceleration = 500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -188,11 +298,11 @@ external_perimeters_first = 0
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 25
 extra_perimeters = 0
-extruder_clearance_height = 25
+extruder_clearance_height = 34
-extruder_clearance_radius = 45
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = grid
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -226,9 +336,9 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirts = 1
-skirt_distance = 2
+skirt_distance = 3
 skirt_height = 2
 small_perimeter_speed = 25
 solid_infill_below_area = 0
@@ -254,7 +364,7 @@ support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 40
 support_material_synchronize_layers = 0
-support_material_threshold = 45
+support_material_threshold = 40
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
@@ -275,13 +385,15 @@ layer_height = 0.08
 perimeters = 3
 bottom_solid_layers = 9
 top_solid_layers = 11
+bridge_flow_ratio = 0.70
 
 [print:*0.10mm*]
 inherits = *common*
-layer_height = 0.1
+layer_height = 0.10
 perimeters = 3
 bottom_solid_layers = 7
 top_solid_layers = 9
+bridge_flow_ratio = 0.70
 
 [print:*0.12mm*]
 inherits = *common*
@@ -289,12 +401,14 @@ layer_height = 0.12
 perimeters = 3
 bottom_solid_layers = 6
 top_solid_layers = 7
+bridge_flow_ratio = 0.70
 
 [print:*0.16mm*]
 inherits = *common*
 layer_height = 0.16
 bottom_solid_layers = 5
 top_solid_layers = 7
+bridge_flow_ratio = 0.85
 
 [print:*0.20mm*]
 inherits = *common*
@@ -349,7 +463,14 @@ compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diamete
 inherits = *0.28mm*
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
-# Common filament preset
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
+# So having some leeway to get good bed adhesion is not a luxury for many users
+
 [filament:*common*]
 cooling = 0
 compatible_printers = 
@@ -540,6 +661,17 @@ filament_density = 1.3
 filament_colour = #3C4547
 filament_spool_weight = 256
 
+[filament:Extrudr GreenTEC Pro @CREALITY]
+inherits = *PLA*
+filament_vendor = Extrudr
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 56.24
+filament_density = 1.35
+filament_colour = #3C4547
+
 [filament:Real Filament PLA @CREALITY]
 inherits = *PLA*
 filament_vendor = Real Filament
@@ -574,6 +706,28 @@ filament_density = 1.24
 filament_colour = #125467
 filament_spool_weight = 238
 
+[filament:3DJAKE ecoPLA Tough @CREALITY]
+inherits = *PLA*
+filament_vendor = 3DJAKE
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 29.99
+filament_density = 1.21
+filament_colour = #125467
+
+[filament:FormFutura Tough PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = FormFutura
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 46.65
+filament_density = 1.21
+filament_colour = #ed000e
+
 [filament:123-3D Jupiter PLA @CREALITY]
 inherits = *PLA*
 filament_vendor = 123-3D
@@ -588,12 +742,13 @@ filament_colour = #FFE200
 [filament:Das Filament PLA @CREALITY]
 inherits = *PLA*
 filament_vendor = Das Filament
-temperature = 215
+temperature = 210
-bed_temperature = 50
+bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 50
+first_layer_bed_temperature = 60
 filament_cost = 20.56
 filament_density = 1.24
+filament_colour = #C7F935
 
 [filament:Das Filament PETG @CREALITY]
 inherits = *PET*
@@ -604,6 +759,7 @@ first_layer_temperature = 240
 first_layer_bed_temperature = 70
 filament_cost = 27.44
 filament_density = 1.29
+filament_colour = #C7F935
 
 # Common printer preset
 [printer:*common*]
@@ -611,8 +767,8 @@ printer_technology = FFF
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
 between_objects_gcode = 
 pause_print_gcode = 
-deretract_speed = 0
+deretract_speed = 40
-extruder_colour = #FFFF00
+extruder_colour = #FCE94F
 extruder_offset = 0x0
 gcode_flavor = marlin
 silent_mode = 0
@@ -634,23 +790,24 @@ machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.3
+max_layer_height = 0.28
-min_layer_height = 0.07
+min_layer_height = 0.08
 max_print_height = 250
 nozzle_diameter = 0.4
 printer_notes = 
 printer_settings_id = 
-retract_before_travel = 1
+printer_variant = 0.4
-retract_before_wipe = 0%
+retract_before_travel = 2
+retract_before_wipe = 70%
 retract_layer_change = 1
-retract_length = 1
+retract_length = 5
 retract_length_toolchange = 1
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 35
+retract_speed = 60
 single_extruder_multi_material = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
@@ -662,173 +819,271 @@ z_offset = 0
 printer_model = 
 default_print_profile = 0.16mm OPTIMAL @CREALITY
 default_filament_profile = Generic PLA @CREALITY
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+
+# Intended for printers with a smaller bed, like the Ender-3 series
+[printer:*fastabl*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+
+# Intended for printers with a larger bed, like the CR-10 series
+[printer:*slowabl*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+
+# Intended for printers with vendor official firmware verified to support M25
+[printer:*pauseprint*]
+pause_print_gcode = M25 ; pause print
+
+# Intended for printers where the Z-axis lowers the print bed during printing, like the Ender-5 series
+[printer:*descendingz*]
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+
+# Intended for printers with dual extruders and a single hotend/nozzle, like the CR-X series
+[printer:*dualextruder*]
+single_extruder_multi_material = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+extra_loading_move = -2
+parking_pos_retraction = 92
+deretract_speed = 40,40
+extruder_colour = #FCE94F;#729FCF
+extruder_offset = 0x0,0x0
+max_layer_height = 0.28,0.28
+min_layer_height = 0.08,0.08
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 70%,70%
+retract_layer_change = 1,1
+retract_length = 5,5
+retract_length_toolchange = 1,1
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 60,60
+wipe = 1,1
 
 [printer:Creality Ender-3]
 inherits = *common*
 renamed_from = "Creality ENDER-3"
-printer_model = ENDER3
-printer_variant = 0.4
-max_layer_height = 0.28
-min_layer_height = 0.08
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
 bed_shape = 3x3,228x3,228x228,3x228
 max_print_height = 250
-machine_max_acceleration_e = 5000
+printer_model = ENDER3
-machine_max_acceleration_extruding = 500
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
-machine_max_acceleration_retracting = 1000
-machine_max_acceleration_x = 500
-machine_max_acceleration_y = 500
-machine_max_acceleration_z = 100
-machine_max_feedrate_e = 60
-machine_max_feedrate_x = 500
-machine_max_feedrate_y = 500
-machine_max_feedrate_z = 10
-machine_max_jerk_e = 5
-machine_max_jerk_x = 8
-machine_max_jerk_y = 8
-machine_max_jerk_z = 0.4
-machine_min_extruding_rate = 0
-machine_min_travel_rate = 0
-nozzle_diameter = 0.4
-retract_before_travel = 2
-retract_length = 5
-retract_speed = 60
-deretract_speed = 40
-retract_before_wipe = 70%
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
-
-[printer:Creality Ender-3V2]
-inherits = Creality Ender-3
-printer_model = ENDER3V2
-printer_variant = 0.4
-bed_shape = 0x0,220x0,220x220,0x220
-
-[printer:*fastabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
-
-[printer:*slowabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
-
-[printer:*invertedz*]
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
 [printer:Creality Ender-3 BLTouch]
 inherits = Creality Ender-3; *fastabl*
 renamed_from = "Creality ENDER-3 BLTouch"
 printer_model = ENDER3BLTOUCH
 
+[printer:Creality Ender-3 V2]
+inherits = *common*
+renamed_from = "Creality Ender-3V2"
+bed_shape = 5x0,215x0,215x220,5x220
+max_print_height = 250
+printer_model = ENDER3V2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3V2\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-3 Max]
+inherits = *common*
+retract_length = 6
+bed_shape = 5x5,295x5,295x295,5x295
+max_print_height = 340
+printer_model = ENDER3MAX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3MAX\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-4]
+inherits = *common*; *descendingz*
+bed_shape = 5x0,215x0,215x220,5x220
+max_print_height = 300
+printer_model = ENDER4
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER4\nPRINTER_HAS_BOWDEN
+
 [printer:Creality Ender-5]
-inherits = Creality Ender-3; *invertedz*
+inherits = *common*; *descendingz*
 retract_length = 6
 bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
+max_print_height = 300
 printer_model = ENDER5
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
-max_print_height = 300
 machine_max_acceleration_e = 1000
 machine_max_feedrate_z = 5
 
 [printer:Creality Ender-5 Plus]
-inherits = Creality Ender-3; *slowabl*; *invertedz*
+inherits = *common*; *slowabl*; *descendingz*
 retract_length = 6
 bed_shape = 5x5,355x5,355x355,5x355
+max_print_height = 400
 printer_model = ENDER5PLUS
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PLUS\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 machine_max_acceleration_e = 1000
 machine_max_feedrate_z = 5
 machine_max_feedrate_x = 300
 machine_max_feedrate_y = 300
 
+[printer:Creality Ender-6]
+inherits = *common*; *descendingz*
+bed_shape = 5x5,255x5,255x255,5x255
+max_print_height = 400
+printer_model = ENDER6
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER6\nPRINTER_HAS_BOWDEN
+
 [printer:Creality Ender-2]
-inherits = Creality Ender-3
+inherits = *common*
 renamed_from = "Creality ENDER-2"
 bed_shape = 0x0,150x0,150x150,0x150
+max_print_height = 200
 printer_model = ENDER2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2\nPRINTER_HAS_BOWDEN
-max_print_height = 200
+
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 X15 Y135 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
+[printer:Creality CR-5 Pro]
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y140 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+30, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+inherits = *common*; *slowabl*; *descendingz*
+retract_length = 6
+bed_shape = 5x5,295x5,295x220,5x220
+max_print_height = 380
+printer_model = CR5PRO
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PRO\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-5 Pro H]
+inherits = *common*; *slowabl*; *descendingz*
+retract_length = 3
+bed_shape = 5x5,295x5,295x220,5x220
+max_print_height = 380
+printer_model = CR5PROH
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PROH\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-6 SE]
+inherits = *common*; *fastabl*; *pauseprint*
+bed_shape = 5x0,230x0,230x235,5x235
+printer_model = CR6SE
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6SE\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-6 Max]
+inherits = *common*; *slowabl*
+retract_length = 6
+bed_shape = 5x5,395x5,395x395,5x395
+max_print_height = 400
+printer_model = CR6MAX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6MAX\nPRINTER_HAS_BOWDEN
 
 [printer:Creality CR-10 Mini]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 6
-bed_shape = 2.5x5,2.5x225,302.5x225,302.5x5
+bed_shape = 2.5x5,302.5x5,302.5x225,2.5x225
+max_print_height = 300
 printer_model = CR10MINI
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MINI\nPRINTER_HAS_BOWDEN
-max_print_height = 300
+
+[printer:Creality CR-10 Max]
+inherits = *common*; *slowabl*
+retract_length = 6
+bed_shape = 5x5,445x5,445x445,5x445
+max_print_height = 470
+printer_model = CR10MAX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MAX\nPRINTER_HAS_BOWDEN
 
 [printer:Creality CR-10]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 V2]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10V2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V2\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 V3]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 1
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10V3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V3
-max_print_height = 400
 
 [printer:Creality CR-10 S]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10S
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S Pro]
-inherits = Creality Ender-3; *slowabl*
+inherits = *common*; *slowabl*
 retract_length = 6
-bed_shape = 0x0,300x0,300x300,0x300
+bed_shape = 5x5,295x5,295x295,5x295
+max_print_height = 400
 printer_model = CR10SPRO
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPRO\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S Pro V2]
-inherits = Creality Ender-3; *slowabl*
+inherits = *common*; *slowabl*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10SPROV2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPROV2\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S4]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 6
-bed_shape = 5x5,405x5,405x405,5x405
+bed_shape = 5x5,395x5,395x395,5x395
+max_print_height = 400
 printer_model = CR10S4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S4\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S5]
-inherits = Creality Ender-3
+inherits = *common*
 retract_length = 6
 bed_shape = 5x5,505x5,505x505,5x505
+max_print_height = 500
 printer_model = CR10S5
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
-max_print_height = 500
 
 [printer:Creality CR-20]
-inherits = Creality Ender-3
+inherits = *common*
 printer_model = CR20
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20\nPRINTER_HAS_BOWDEN
 
 [printer:Creality CR-20 Pro]
-inherits = Creality Ender-3; *fastabl*
+inherits = *common*; *fastabl*
 retract_length = 4
 printer_model = CR20PRO
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20PRO\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-200B]
+inherits = *common*; *descendingz*
+bed_shape = 5x5,195x5,195x195,5x195
+max_print_height = 200
+printer_model = CR200B
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR200B\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-8]
+inherits = *common*
+bed_shape = 5x5,215x5,215x215,5x215
+max_print_height = 210
+printer_model = CR8
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR8\nPRINTER_HAS_BOWDEN
+
+#[printer:Creality CR-X]
+#inherits = *common*; *dualextruder*
+#retract_length = 6,6
+#bed_shape = 5x5,295x5,295x295,5x295
+#max_print_height = 400
+#printer_model = CRX
+#printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CRX\nPRINTER_HAS_BOWDEN
+
+#[printer:Creality CR-X Pro]
+#inherits = *common*; *dualextruder*; *slowabl*
+#retract_length = 6,6
+#bed_shape = 5x5,295x5,295x295,5x295
+#max_print_height = 400
+#printer_model = CRXPRO
+#printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CRXPRO\nPRINTER_HAS_BOWDEN

resources/profiles/Creality/cr10max.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="440mm" height="440mm" version="1.1" viewBox="0 0 440 440" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="439.5" height="439.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/cr10s4.svg

@@ -1,4 +1,4 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<svg width="400mm" height="400mm" version="1.1" viewBox="0 0 400 400" xmlns="http://www.w3.org/2000/svg">
+<svg width="390mm" height="390mm" version="1.1" viewBox="0 0 390 390" xmlns="http://www.w3.org/2000/svg">
-  <rect x=".25" y=".25" width="399.5" height="399.5" fill="none" stroke="#fff" stroke-width=".5"/>
+  <rect x=".25" y=".25" width="389.5" height="389.5" fill="none" stroke="#fff" stroke-width=".5"/>
 </svg>

resources/profiles/Creality/cr10spro.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="290mm" height="290mm" version="1.1" viewBox="0 0 290 290" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="289.5" height="289.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/cr200b.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="190mm" height="190mm" version="1.1" viewBox="0 0 190 190" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="189.5" height="189.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/cr5pro.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="290mm" height="215mm" version="1.1" viewBox="0 0 290 215" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="289.5" height="214.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/cr6se.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="225mm" height="235mm" version="1.1" viewBox="0 0 225 235" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="224.5" height="234.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/cr8.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="210mm" height="210mm" version="1.1" viewBox="0 0 210 210" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="209.5" height="209.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/ender3v2.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="210mm" height="220mm" version="1.1" viewBox="0 0 210 220" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="209.5" height="219.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>

resources/profiles/Creality/ender6.svg

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="250mm" height="250mm" version="1.1" viewBox="0 0 250 250" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="249.5" height="249.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>