3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'master' into xsdata

Browse source 
Conflicts:
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
This commit is contained in:
Alessandro Ranellucci 2013-08-16 09:09:56 +02:00
commit fa07c512b4
18 changed files with 262 additions and 191 deletions
lib/Slic3r/GCode
Layer.pm

24
lib/Slic3r/GCode/Layer.pm
View file

@ -46,23 +46,16 @@ sub process_layer {
$self->second_layer_things_done(1);
}
# set new layer, but don't move Z as support material contact areas may need an intermediate one
# set new layer - this will change Z and force a retraction if retract_layer_change is enabled
$gcode .= $self->gcodegen->change_layer($layer);
# prepare callback to call as soon as a Z command is generated
$self->gcodegen->move_z_callback(sub {
$self->gcodegen->move_z_callback(undef); # circular ref or not?
return "" if !$Slic3r::Config->layer_gcode;
return $Slic3r::Config->replace_options($Slic3r::Config->layer_gcode, {
layer_num => $self->gcodegen->layer->id,
}) . "\n";
});
$gcode .= $Slic3r::Config->replace_options($Slic3r::Config->layer_gcode, {
layer_num => $self->gcodegen->layer->id,
}) . "\n" if $Slic3r::Config->layer_gcode;
# extrude skirt
if ((values %{$self->skirt_done}) < $Slic3r::Config->skirt_height && !$self->skirt_done->{$layer->print_z}) {
$self->gcodegen->set_shift(@{$self->shift});
$gcode .= $self->gcodegen->set_extruder($self->extruders->[0]); # move_z requires extruder
$gcode .= $self->gcodegen->move_z($layer->print_z);
$gcode .= $self->gcodegen->set_extruder($self->extruders->[0]);
# skip skirt if we have a large brim
if ($layer->id < $Slic3r::Config->skirt_height) {
# distribute skirt loops across all extruders
@ -81,8 +74,7 @@ sub process_layer {
# extrude brim
if (!$self->brim_done) {
$gcode .= $self->gcodegen->set_extruder($self->extruders->[$Slic3r::Config->support_material_extruder-1]); # move_z requires extruder
$gcode .= $self->gcodegen->move_z($layer->print_z);
$gcode .= $self->gcodegen->set_extruder($self->extruders->[$Slic3r::Config->support_material_extruder-1]);
$self->gcodegen->set_shift(@{$self->shift});
$gcode .= $self->gcodegen->extrude_loop($_, 'brim') for @{$self->print->brim};
$self->brim_done(1);
@ -98,7 +90,6 @@ sub process_layer {
# extrude support material before other things because it might use a lower Z
# and also because we avoid travelling on other things when printing it
if ($self->print->has_support_material && $layer->isa('Slic3r::Layer::Support')) {
$gcode .= $self->gcodegen->move_z($layer->print_z);
if ($layer->support_interface_fills) {
$gcode .= $self->gcodegen->set_extruder($self->extruders->[$Slic3r::Config->support_material_interface_extruder-1]);
$gcode .= $self->gcodegen->extrude_path($_, 'support material interface')
@ -111,9 +102,6 @@ sub process_layer {
}
}
# set actual Z - this will force a retraction
$gcode .= $self->gcodegen->move_z($layer->print_z);
# tweak region ordering to save toolchanges
my @region_ids = 0 .. ($self->print->regions_count-1);
if ($self->gcodegen->multiple_extruders) {