diff --git a/README.md b/README.md index 3939747fc..53c831561 100644 --- a/README.md +++ b/README.md @@ -20,9 +20,8 @@ All user facing code is written in C++, and some legacy code as well as unit tests are written in Perl. Perl is not required for either development or use of Slic3r. -The C++ API is public and its use in other projects is encouraged. -The goal is to make Slic3r fully modular so that any part of its logic -can be used separately. +The slicing core is the `libslic3r` library, which can be built and used in a standalone way. +The command line interface is a thin wrapper over `libslic3r`. ### What are Slic3r's main features? @@ -67,309 +66,13 @@ Sure! You can do the following to find things that are available to help with: ### What's Slic3r license? -Slic3r is licensed under the _GNU Affero General Public License, version 3_. -The author is Alessandro Ranellucci. +Slic3r PE is licensed under the _GNU Affero General Public License, version 3_. +The Prusa Edition is originally based on Slic3r by Alessandro Ranellucci. The [Silk icon set](http://www.famfamfam.com/lab/icons/silk/) used in Slic3r is licensed under the _Creative Commons Attribution 3.0 License_. The author of the Silk icon set is Mark James. -### How can I invoke slic3r.pl using the command line? +### How can I use Slic3r PE from the command line? - Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ... - - --help Output this usage screen and exit - --version Output the version of Slic3r and exit - --save Save configuration to the specified file - --load Load configuration from the specified file. It can be used - more than once to load options from multiple files. - -o, --output File to output gcode to (by default, the file will be saved - into the same directory as the input file using the - --output-filename-format to generate the filename.) If a - directory is specified for this option, the output will - be saved under that directory, and the filename will be - generated by --output-filename-format. - - Non-slicing actions (no G-code will be generated): - --repair Repair given STL files and save them as _fixed.obj - --cut Cut given input files at given Z (relative) and export - them as _upper.stl and _lower.stl - --split Split the shells contained in given STL file into several STL files - --info Output information about the supplied file(s) and exit - - -j, --threads Number of threads to use (1+, default: 2) - - GUI options: - --gui Forces the GUI launch instead of command line slicing (if you - supply a model file, it will be loaded into the plater) - --no-plater Disable the plater tab - --no-gui Forces the command line slicing instead of gui. - This takes precedence over --gui if both are present. - --autosave Automatically export current configuration to the specified file - - Output options: - --output-filename-format - Output file name format; all config options enclosed in brackets - will be replaced by their values, as well as [input_filename_base] - and [input_filename] (default: [input_filename_base].gcode) - --post-process Generated G-code will be processed with the supplied script; - call this more than once to process through multiple scripts. - --export-png Export zipped PNG files containing slices instead of G-code. - -m, --merge If multiple files are supplied, they will be composed into a single - print rather than processed individually. - - Printer options: - --nozzle-diameter Diameter of nozzle in mm (default: 0.5) - --print-center Coordinates in mm of the point to center the print around - (default: 100,100) - --z-offset Additional height in mm to add to vertical coordinates - (+/-, default: 0) - --gcode-flavor The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion, - default: reprap) - --use-relative-e-distances Enable this to get relative E values (default: no) - --use-firmware-retraction Enable firmware-controlled retraction using G10/G11 (default: no) - --use-volumetric-e Express E in cubic millimeters and prepend M200 (default: no) - --gcode-comments Make G-code verbose by adding comments (default: no) - - Filament options: - --filament-diameter Diameter in mm of your raw filament (default: 3) - --extrusion-multiplier - Change this to alter the amount of plastic extruded. There should be - very little need to change this value, which is only useful to - compensate for filament packing (default: 1) - --temperature Extrusion temperature in degree Celsius, set 0 to disable (default: 200) - --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius, - set 0 to disable (default: same as --temperature) - --bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: 0) - --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius, - set 0 to disable (default: same as --bed-temperature) - - Speed options: - --travel-speed Speed of non-print moves in mm/s (default: 130) - --perimeter-speed Speed of print moves for perimeters in mm/s (default: 30) - --small-perimeter-speed - Speed of print moves for small perimeters in mm/s or % over perimeter speed - (default: 30) - --external-perimeter-speed - Speed of print moves for the external perimeter in mm/s or % over perimeter speed - (default: 70%) - --infill-speed Speed of print moves in mm/s (default: 60) - --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed - (default: 60) - --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed - (default: 50) - --support-material-speed - Speed of support material print moves in mm/s (default: 60) - --support-material-interface-speed - Speed of support material interface print moves in mm/s or % over support material - speed (default: 100%) - --bridge-speed Speed of bridge print moves in mm/s (default: 60) - --gap-fill-speed Speed of gap fill print moves in mm/s (default: 20) - --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute - value or as a percentage over normal speeds (default: 30%) - - Acceleration options: - --perimeter-acceleration - Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero - to disable; default: 0) - --infill-acceleration - Overrides firmware's default acceleration for infill. (mm/s^2, set zero - to disable; default: 0) - --bridge-acceleration - Overrides firmware's default acceleration for bridges. (mm/s^2, set zero - to disable; default: 0) - --first-layer-acceleration - Overrides firmware's default acceleration for first layer. (mm/s^2, set zero - to disable; default: 0) - --default-acceleration - Acceleration will be reset to this value after the specific settings above - have been applied. (mm/s^2, set zero to disable; default: 0) - - Accuracy options: - --layer-height Layer height in mm (default: 0.3) - --first-layer-height Layer height for first layer (mm or %, default: 0.35) - --infill-every-layers - Infill every N layers (default: 1) - --solid-infill-every-layers - Force a solid layer every N layers (default: 0) - - Print options: - --perimeters Number of perimeters/horizontal skins (range: 0+, default: 3) - --top-solid-layers Number of solid layers to do for top surfaces (range: 0+, default: 3) - --bottom-solid-layers Number of solid layers to do for bottom surfaces (range: 0+, default: 3) - --solid-layers Shortcut for setting the two options above at once - --fill-density Infill density (range: 0%-100%, default: 40%) - --fill-angle Infill angle in degrees (range: 0-90, default: 45) - --fill-pattern Pattern to use to fill non-solid layers (default: honeycomb) - --solid-fill-pattern Pattern to use to fill solid layers (default: rectilinear) - --start-gcode Load initial G-code from the supplied file. This will overwrite - the default command (home all axes [G28]). - --end-gcode Load final G-code from the supplied file. This will overwrite - the default commands (turn off temperature [M104 S0], - home X axis [G28 X], disable motors [M84]). - --before-layer-gcode Load before-layer-change G-code from the supplied file (default: nothing). - --layer-gcode Load after-layer-change G-code from the supplied file (default: nothing). - --toolchange-gcode Load tool-change G-code from the supplied file (default: nothing). - --seam-position Position of loop starting points (random/nearest/aligned, default: aligned). - --external-perimeters-first Reverse perimeter order. (default: no) - --spiral-vase Experimental option to raise Z gradually when printing single-walled vases - (default: no) - --only-retract-when-crossing-perimeters - Disable retraction when travelling between infill paths inside the same island. - (default: no) - --solid-infill-below-area - Force solid infill when a region has a smaller area than this threshold - (mm^2, default: 70) - --infill-only-where-needed - Only infill under ceilings (default: no) - --infill-first Make infill before perimeters (default: no) - - Quality options (slower slicing): - --extra-perimeters Add more perimeters when needed (default: yes) - --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no) - --thin-walls Detect single-width walls (default: yes) - --overhangs Experimental option to use bridge flow, speed and fan for overhangs - (default: yes) - - Support material options: - --support-material Generate support material for overhangs - --support-material-threshold - Overhang threshold angle (range: 0-90, set 0 for automatic detection, - default: 0) - --support-material-pattern - Pattern to use for support material (default: honeycomb) - --support-material-spacing - Spacing between pattern lines (mm, default: 2.5) - --support-material-angle - Support material angle in degrees (range: 0-90, default: 0) - --support-material-contact-distance - Vertical distance between object and support material - (0+, default: 0.2) - --support-material-interface-layers - Number of perpendicular layers between support material and object (0+, default: 3) - --support-material-interface-spacing - Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: 0) - --raft-layers Number of layers to raise the printed objects by (range: 0+, default: 0) - --support-material-enforce-layers - Enforce support material on the specified number of layers from bottom, - regardless of --support-material and threshold (0+, default: 0) - --dont-support-bridges - Experimental option for preventing support material from being generated under bridged areas (default: yes) - - Retraction options: - --retract-length Length of retraction in mm when pausing extrusion (default: 1) - --retract-speed Speed for retraction in mm/s (default: 30) - --retract-restart-extra - Additional amount of filament in mm to push after - compensating retraction (default: 0) - --retract-before-travel - Only retract before travel moves of this length in mm (default: 2) - --retract-lift Lift Z by the given distance in mm when retracting (default: 0) - --retract-lift-above Only lift Z when above the specified height (default: 0) - --retract-lift-below Only lift Z when below the specified height (default: 0) - --retract-layer-change - Enforce a retraction before each Z move (default: no) - --wipe Wipe the nozzle while doing a retraction (default: no) - - Retraction options for multi-extruder setups: - --retract-length-toolchange - Length of retraction in mm when disabling tool (default: 10) - --retract-restart-extra-toolchange - Additional amount of filament in mm to push after - switching tool (default: 0) - - Cooling options: - --cooling Enable fan and cooling control - --min-fan-speed Minimum fan speed (default: 35%) - --max-fan-speed Maximum fan speed (default: 100%) - --bridge-fan-speed Fan speed to use when bridging (default: 100%) - --fan-below-layer-time Enable fan if layer print time is below this approximate number - of seconds (default: 60) - --slowdown-below-layer-time Slow down if layer print time is below this approximate number - of seconds (default: 30) - --min-print-speed Minimum print speed (mm/s, default: 10) - --disable-fan-first-layers Disable fan for the first N layers (default: 1) - --fan-always-on Keep fan always on at min fan speed, even for layers that don't need - cooling - - Skirt options: - --skirts Number of skirts to draw (0+, default: 1) - --skirt-distance Distance in mm between innermost skirt and object - (default: 6) - --skirt-height Height of skirts to draw (expressed in layers, 0+, default: 1) - --min-skirt-length Generate no less than the number of loops required to consume this length - of filament on the first layer, for each extruder (mm, 0+, default: 0) - --brim-width Width of the brim that will get added to each object to help adhesion - (mm, default: 0) - - Transform options: - --scale Factor for scaling input object (default: 1) - --rotate Rotation angle in degrees (0-360, default: 0) - --duplicate Number of items with auto-arrange (1+, default: 1) - --duplicate-grid Number of items with grid arrangement (default: 1,1) - --duplicate-distance Distance in mm between copies (default: 6) - --dont-arrange Don't arrange the objects on the build plate. The model coordinates - define the absolute positions on the build plate. - The option --print-center will be ignored. - --xy-size-compensation - Grow/shrink objects by the configured absolute distance (mm, default: 0) - - Sequential printing options: - --complete-objects When printing multiple objects and/or copies, complete each one before - starting the next one; watch out for extruder collisions (default: no) - --extruder-clearance-radius Radius in mm above which extruder won't collide with anything - (default: 20) - --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from - extruder tip and carriage bottom (default: 20) - - Miscellaneous options: - --notes Notes to be added as comments to the output file - --resolution Minimum detail resolution (mm, set zero for full resolution, default: 0) - - Flow options (advanced): - --extrusion-width Set extrusion width manually; it accepts either an absolute value in mm - (like 0.65) or a percentage over layer height (like 200%) - --first-layer-extrusion-width - Set a different extrusion width for first layer - --perimeter-extrusion-width - Set a different extrusion width for perimeters - --external-perimeter-extrusion-width - Set a different extrusion width for external perimeters - --infill-extrusion-width - Set a different extrusion width for infill - --solid-infill-extrusion-width - Set a different extrusion width for solid infill - --top-infill-extrusion-width - Set a different extrusion width for top infill - --support-material-extrusion-width - Set a different extrusion width for support material - --infill-overlap Overlap between infill and perimeters (default: 15%) - --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1) - - Multiple extruder options: - --extruder-offset Offset of each extruder, if firmware doesn't handle the displacement - (can be specified multiple times, default: 0x0) - --perimeter-extruder - Extruder to use for perimeters and brim (1+, default: 1) - --infill-extruder Extruder to use for infill (1+, default: 1) - --solid-infill-extruder Extruder to use for solid infill (1+, default: 1) - --support-material-extruder - Extruder to use for support material, raft and skirt (1+, default: 1) - --support-material-interface-extruder - Extruder to use for support material interface (1+, default: 1) - --ooze-prevention Drop temperature and park extruders outside a full skirt for automatic wiping - (default: no) - --ooze-prevention Drop temperature and park extruders outside a full skirt for automatic wiping - (default: no) - --standby-temperature-delta - Temperature difference to be applied when an extruder is not active and - --ooze-prevention is enabled (default: -5) - - -If you want to change a preset file, just do - - slic3r.pl --load config.ini --layer-height 0.25 --save config.ini - -If you want to slice a file overriding an option contained in your preset file: - - slic3r.pl --load config.ini --layer-height 0.25 file.stl +Please refer to the [Command Line Interface](https://github.com/prusa3d/Slic3r/wiki/Command-Line-Interface) wiki page. diff --git a/src/slic3r/GUI/PresetBundle.cpp b/src/slic3r/GUI/PresetBundle.cpp index d8fefbf3f..19f9040bf 100644 --- a/src/slic3r/GUI/PresetBundle.cpp +++ b/src/slic3r/GUI/PresetBundle.cpp @@ -1449,7 +1449,7 @@ bool PresetBundle::parse_color(const std::string &scolor, unsigned char *rgb_out void PresetBundle::load_default_preset_bitmaps() { this->prints.load_bitmap_default("cog"); - this->sla_prints.load_bitmap_default("package_green.png"); + this->sla_prints.load_bitmap_default("cog"); this->filaments.load_bitmap_default("spool.png"); this->sla_materials.load_bitmap_default("package_green.png"); this->printers.load_bitmap_default("printer");