Alessandro Ranellucci
|
038076e040
|
Bugfix: first layer extrusion width wasn't affecting infill. Includes regression test. #2042
|
2014-05-18 23:36:30 +02:00 |
|
Alessandro Ranellucci
|
0ddcefe956
|
Use support material speed for skirt and brim instead of perimeter speed so that perimeter speed can be set on a per-region basis
|
2014-05-18 17:02:18 +02:00 |
|
Alessandro Ranellucci
|
58ffaca2df
|
Bugfix: ooze_prevention brought the extruder too far. Includes regression test
|
2014-05-15 19:23:57 +02:00 |
|
Alessandro Ranellucci
|
69002b8ea2
|
No tests were covering randomize-start, which was not working anymore after recent ExtrusionLoop refactoring. #2028
|
2014-05-12 21:49:17 +02:00 |
|
Alessandro Ranellucci
|
7ba08c90cf
|
Refactoring to Model API for making it stricter and safer
|
2014-05-09 14:24:35 +02:00 |
|
Alessandro Ranellucci
|
93c1ae92c9
|
Added failing test case for contains_point() not working on Windows. #1950
|
2014-04-30 16:44:25 +02:00 |
|
Alessandro Ranellucci
|
4680bbdfe2
|
Make sure spiral vase mode is not enabled for multi-island layers. #1938
|
2014-04-30 12:23:07 +02:00 |
|
Alessandro Ranellucci
|
a31b2e6ca2
|
Stricter implementation of the overhang detection. Includes unit tests
|
2014-04-29 19:58:58 +02:00 |
|
Alessandro Ranellucci
|
7a9dec3720
|
One more change to multi-value placeholders: indices start from 0. #1899
|
2014-04-29 17:12:00 +02:00 |
|
Alessandro Ranellucci
|
a4b6075600
|
Fixed regression and ambiguity about multiple-value placeholders like [first_layer_temperature_1]. Includes several unit tests covering regression. #1899
|
2014-04-29 17:06:31 +02:00 |
|
Alessandro Ranellucci
|
913ab54a2b
|
Bugfix: gap fill was not inserted in the correct order before leaving island. Includes regression test. #1907
|
2014-04-29 15:25:14 +02:00 |
|
Alessandro Ranellucci
|
129b6651f6
|
More correct test description
|
2014-04-26 16:09:00 +02:00 |
|
Alessandro Ranellucci
|
148c773319
|
Exclude support from bridged areas
|
2014-04-26 16:07:43 +02:00 |
|
Alessandro Ranellucci
|
6201aacf88
|
New coverage detection for bridges. Includes implementation of ExPolygon::get_trapezoids()
|
2014-04-24 13:44:39 +02:00 |
|
Alessandro Ranellucci
|
d458a7c4d2
|
Merge pull request #1956 from ledvinap/fix-bridges
Fix bridges
|
2014-04-23 12:09:02 +02:00 |
|
Petr Ledvina
|
4c1ffecfc4
|
Fix test to check for correct direction and accept result close to 180 degrees.
|
2014-04-23 11:40:37 +02:00 |
|
Will Miles
|
fbce8e6730
|
Avoid integer overflow in arc test. Fixes #1918
|
2014-04-22 23:01:01 -04:00 |
|
Alessandro Ranellucci
|
9989ebaabd
|
Refactored the BridgeDetector class to expose a cleaner API and make it stateful
|
2014-04-22 00:59:14 +02:00 |
|
Alessandro Ranellucci
|
f7e8a99078
|
More tests and related fixes to bridge detection. #1917
|
2014-04-21 20:44:21 +02:00 |
|
Alessandro Ranellucci
|
c4bfe64fb8
|
Test coverage for retract_layer_change
|
2014-04-19 19:28:43 +02:00 |
|
Alessandro Ranellucci
|
a248c98192
|
Fixed regression when concentric infill was used as solid infill. Includes regression test. #1650
|
2014-04-19 16:53:37 +02:00 |
|
Alessandro Ranellucci
|
f51921a11a
|
Default extruder wasn't applied to perimeter extruder. Includes regression test. #1868
|
2014-04-19 11:43:41 +02:00 |
|
Alessandro Ranellucci
|
62e19469bc
|
Fixed regression in --infill-only-where-needed. Includes a minimal test suite for such feature. #1871
Conflicts:
t/fill.t
|
2014-04-18 21:48:32 +02:00 |
|
Alessandro Ranellucci
|
15628a90ed
|
Regression test for numerical issues causing thin gaps between perimeters and infill. #1803
|
2014-04-18 17:30:35 +02:00 |
|
Alessandro Ranellucci
|
e02d33bbce
|
Remove weak test. #1803
|
2014-04-15 00:57:43 +02:00 |
|
Alessandro Ranellucci
|
43ffb7d3e8
|
Bugfix: sometimes a tiny gap was left between infill and perimeters. Includes regression test. #1803
|
2014-04-15 00:22:31 +02:00 |
|
Alessandro Ranellucci
|
26bdbf0210
|
Test bridges when infill flow is larger than perimeter flow. #1917
|
2014-04-09 12:09:25 +02:00 |
|
Alessandro Ranellucci
|
627f23d5fe
|
Make angle increment (i.e. angle resolution) configurable
|
2014-04-08 16:53:32 +02:00 |
|
Alessandro Ranellucci
|
20ca6cea05
|
Test Clipper's buggy behavior with polylines having coinciding endpoints
|
2014-04-08 15:26:31 +02:00 |
|
Alessandro Ranellucci
|
38f6e3b643
|
More unit tests for bridge angle detection
|
2014-04-08 15:18:37 +02:00 |
|
Alessandro Ranellucci
|
9be57f750d
|
Some fixes to bridge direction detection. Includes regression tests
|
2014-04-08 14:51:55 +02:00 |
|
Alessandro Ranellucci
|
23e6abff49
|
Added first unit test for bridge direction
|
2014-04-08 13:08:42 +02:00 |
|
Alessandro Ranellucci
|
e4709068b9
|
Some more unit tests for arc fitting
|
2014-04-06 22:32:53 +02:00 |
|
Alessandro Ranellucci
|
1d35701f99
|
Incomplete work on arc fitting. Results are still incomplete. More unit tests are needed
|
2014-04-06 22:10:34 +02:00 |
|
Alessandro Ranellucci
|
e9e23119fc
|
Failing test for broken command line scaling. #1889
|
2014-04-05 11:21:26 +02:00 |
|
Alessandro Ranellucci
|
d6d6a51e0d
|
Fix for incomplete extrusion on solid surfaces
|
2014-04-05 10:54:24 +02:00 |
|
Alessandro Ranellucci
|
d2a6194960
|
Fix the 'extruder' behavior in CLI and test that Print::Simple accepts an incomplete DynamicConfig object
|
2014-04-05 10:18:00 +02:00 |
|
Alessandro Ranellucci
|
6f3844c1ba
|
Fix crash when using multiple skirts with a single, non-zero, extruder. Includes regression test
|
2014-04-05 10:09:05 +02:00 |
|
Alessandro Ranellucci
|
9c7cc484bc
|
Update t/support.t still assuming default support material pattern was honeycomb
|
2014-03-27 00:28:26 +01:00 |
|
Alessandro Ranellucci
|
071097d3f1
|
Fix extruder assignment and tests
|
2014-03-27 00:01:33 +01:00 |
|
Alessandro Ranellucci
|
10bf334a58
|
Added one more failing test to address bad option priority hierarchy
|
2014-03-26 19:42:01 +01:00 |
|
Alessandro Ranellucci
|
a058994b20
|
Disable thin wall test failing on Linux. A more robust implementation is needed. #1825
|
2014-03-25 14:23:11 +01:00 |
|
Alessandro Ranellucci
|
432a87e73d
|
New option for forcing the generation of interface shells. #1847
|
2014-03-25 01:11:28 +01:00 |
|
Alessandro Ranellucci
|
6feff7fe53
|
Test that stacked cubes with distinct extruders don't generate any internal interface shells. #1847
|
2014-03-24 23:44:47 +01:00 |
|
Alessandro Ranellucci
|
5ce4de0544
|
Bugfix: wrong inwards moves were calculated for 2+ copies because ExtrusionLoop objects were modified in place. Includes regression test. #1842
|
2014-03-24 20:01:14 +01:00 |
|
Alessandro Ranellucci
|
7421a7bf63
|
Turn fill_density into percentage
|
2014-03-22 16:23:33 +01:00 |
|
Alessandro Ranellucci
|
34f1511e0c
|
Better fix for non-global options not being replaced in filename placeholders. Includes refactoring and a new PlaceholderParser class. Also includes regression tests. #1831
|
2014-03-17 00:39:07 +01:00 |
|
Alessandro Ranellucci
|
bc054e613c
|
Fix regression causing non-global config options to be ignored when replacing placeholders in output filename format. #1831
|
2014-03-15 20:45:10 +01:00 |
|
Alessandro Ranellucci
|
2a73ab988f
|
Recursive pruning. Some more unit tests
|
2014-03-09 17:46:02 +01:00 |
|
Alessandro Ranellucci
|
33da6adc3c
|
Better pruning
|
2014-03-08 11:36:48 +01:00 |
|