3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
17,850 Commits 1 Branch 1 Tag 249 MiB
04f09361b9
Commit Graph

162 Commits

Author SHA1 Message Date
rtyr
7323851f66
Bumped up versioni to 0.0.13 2021-12-21 10:31:36 +01:00
Pascal de Bruijn
d05bf014eb creality.ini: Ender-3 S1 improvements 
It seems the firmware is setup to not have to run ABL for each print,
and thus Creality's example start_gcode does not include G29

Finetuning for the S1's Sprite Direct Drive extruder
 2021-12-17 19:04:27 +01:00
rtyr
33351c4e5f
Bumped up version to 0.1.2 - Added Ender 3 S1 2021-12-16 12:02:32 +01:00
Pascal de Bruijn
37cfcadadd creality.ini: add preliminary Ender-3 S1 2021-12-15 20:14:01 +01:00
Pascal de Bruijn
f5d4349016 creality.ini: slight improvements to Ender-2 Pro 
Replace bed stl with something consistent with the rest
Replace bed svg with something simpler consistent with the rest
Add tiny safety margin
 2021-12-15 20:03:45 +01:00
Pascal de Bruijn
c045a34fa0 creality.ini: always output layer heights with two decimals 2021-12-15 19:43:15 +01:00
rtyr
0255ff2fd6
Bumped up version to 0.1.1 2021-12-11 21:01:34 +01:00
Spencer Owen
93f62854b1 Add ender 2 pro 2021-12-04 13:34:29 -07:00
rtyr
e32cde8054
Creality - bumped up version to 0.1.0 2021-06-28 19:05:30 +02:00
Pascal de Bruijn
d737142f37 creality.ini: make print profiles inclusive of Sermoon printers 2021-06-28 18:02:00 +02:00
Pascal de Bruijn
43346a871c creality.ini: beta support for Sermoon D1 2021-06-27 19:20:25 +02:00
Pascal de Bruijn
3cf1f568d0 creality.ini: beta support for Ender-7 2021-06-27 19:07:17 +02:00
Pascal de Bruijn
95c879cf00 creality.ini: beta support for CR-10 SMART 2021-06-27 18:51:41 +02:00
rtyr
fdd5151a45
Version bumped to 0.0.17 2021-06-01 09:01:45 +02:00
Pascal de Bruijn
3abc0b84a4 creality.ini: straingauge start_gcode wait for bed temp to settle as well 
given this applies to a larger bed printer as well (CR-6 Max).
 2021-05-31 20:00:41 +02:00
Pascal de Bruijn
166790c49e creality.ini: fix new placeholder syntax 2021-05-30 20:37:02 +02:00
Pascal de Bruijn
ddb556db66 creality.ini: internal start_gcode consistency improvements 2021-05-30 17:55:18 +02:00
Pascal de Bruijn
a934960c00 creality: special start_gcode for straingauge printers 2021-05-30 17:48:54 +02:00
Pascal de Bruijn
3a445c99fb creality.ini: use 150C during ABL again 
initially ABL temp was lowered to 120C for straingauge ABL (G29), but since
we're no longer doing ABL on each print for straingauge printers like the CR6
series, we can raise the temp a little again
 2021-05-30 17:33:58 +02:00
Pascal de Bruijn
620985b29f creality.ini: improve output_filename_format 
this moves the print_time directly after the input_filename_base,
so it has the most chance of surviving truncation by marlin.

temperature is also added in front of the filament_type.
 2021-05-04 18:41:06 +02:00
Pascal de Bruijn
6110d1ef05 creality.ini: Add Devil Design PLA Matt 2021-05-03 18:13:02 +02:00
rtyr
b71fa0d634
Bumped up version to 0.0.16 2021-04-20 20:35:49 +02:00
Pascal de Bruijn
2cb268c947 Revert "creality.ini: Extrudr NX2 slightly lower temps" 
This reverts commit 41c56f2eb8.
 2021-04-20 18:13:21 +02:00
Pascal de Bruijn
d50c2872bd creality.ini: disable explicit ABL for CR6-SE (#6383) 
this is also better in line with Creality's intended behavior
 2021-04-20 18:12:08 +02:00
Pascal de Bruijn
d33cffdd1e creality.ini: remove parentheses for galaxy pla filament 
since we've not using those for other filament subtypes
 2021-04-16 19:32:32 +02:00
Pascal de Bruijn
2ffcf97be1 creality.ini: more accurate spool weights for Devil Design 
I just noticed Devil Design uses identical spools to Extrudr NX-2
 2021-04-16 19:30:33 +02:00
Pascal de Bruijn
10e914d9a9 creality.ini: add 3DJAKE ecoPLA Matt 
the filament is very flowy, which means it prints well at lower temperatures.

and given the limited part cooling fan on most creality printers, it prints
less well at higher temperatures.
 2021-04-14 18:00:09 +02:00
Pascal de Bruijn
d8f56ef5fd creality.ini: add Devil Design approx spool weights 
by manufacturer specifications:
https://devildesign.com/download/PLA_-_product_card.pdf
 2021-04-14 17:59:55 +02:00
Pascal de Bruijn
41c56f2eb8 creality.ini: Extrudr NX2 slightly lower temps 
After more practical testing, a slightly lower temp is beneficial on
small pointy areas, preventing them from being slightly deformed.
 2021-04-13 19:09:54 +02:00
rtyr
6121f1de3b
version bumped up to 0.0.15 2021-04-12 11:42:32 +02:00
Pascal de Bruijn
d09871441a creality.ini: add Tough PLAs 2021-04-05 17:24:16 +02:00
Pascal de Bruijn
744311f3c3 creality.ini: improve bridging 2021-04-04 15:24:57 +02:00
Pascal de Bruijn
7eaadf0e47 Revert "creality.ini: move Ender-3 specific extruder_clearance" 
Due to #589.

This reverts commit 34202f71e5.
 2021-03-01 23:56:08 +01:00
Pascal de Bruijn
45cbac0b7c creality.ini: unhide new printers (except CR-X) 2021-03-01 19:00:04 +01:00
Pascal de Bruijn
065a129d47 creality.ini: remove single_extruder_multi_material_priming from printer section 2021-03-01 18:43:40 +01:00
Pascal de Bruijn
7fbb3a2b42 creality.ini: Add CR-5 Pro H 
this is a high temp variant of the regular CR-5 Pro, with the
suspected all metal hotend, presumably the non-H variant has
a teflon lined hotend

related: 2d762ec320
 2021-03-01 18:40:33 +01:00
Pascal de Bruijn
586ed35e3a creality.ini: fix CR-5 Pro bed_shape 2021-03-01 18:34:18 +01:00
Pascal de Bruijn
f5863cd5d8 creality.ini: CR-200B also has a descending z axis 2021-03-01 18:24:44 +01:00
Pascal de Bruijn
5e78b0f24f creality.ini: remove ignored renamed_from from *descendingz* 
fixes: Nonpublic intermediate preset *descendingz* contains a "renamed_from" field, which is ignored
 2021-03-01 18:21:27 +01:00
Pascal de Bruijn
34202f71e5 creality.ini: move Ender-3 specific extruder_clearance 
replace general extruder_clearance with higher values so there's
a lot of clearance leeway until we get exact figures for each
printer model.

related: f9b4bbb016
 2021-02-28 17:10:25 +01:00
Pascal de Bruijn
90f58fe90a creality.ini: CR-200B bed_shape and max_print_height 2021-02-28 17:06:24 +01:00
Pascal de Bruijn
e5b7b20be1 creality.ini: CR-5 Pro more accurate bed 2021-02-28 16:57:35 +01:00
Pascal de Bruijn
19ba6f1492 creality.ini: add CR-200B 2021-02-28 16:53:33 +01:00
Pascal de Bruijn
2d762ec320 creality.ini: add CR-5 Pro 
retract_length = 3
to prevent clogging since this printer is suspected to have
an all metal hot end, as Creality claims print temperatures
up to 300C
 2021-02-28 16:38:05 +01:00
Pascal de Bruijn
249670f82c creality.ini: fix CR-10 Mini bed_shape 2021-02-28 16:36:58 +01:00
Pascal de Bruijn
bc9c968f05 creality.ini disable single_extruder_multi_material_priming 2021-02-27 18:16:47 +01:00
Pascal de Bruijn
c142af74c5 creality.ini: add printer_notes to Ender3V2 2021-02-27 17:53:20 +01:00
Pascal de Bruijn
19c50c7e69 creality.ini: consolidate more properties to *common* 2021-02-27 17:51:57 +01:00
Pascal de Bruijn
6391d4243f creality.ini: tweak fill_density and skirt_distance 2021-02-27 17:40:44 +01:00
Pascal de Bruijn
9b7621dc7e creality.ini: double digit layer height (cosmetic) 2021-02-23 20:06:55 +01:00