3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
11,171 Commits 1 Branch 1 Tag 249 MiB
050a9adf36
Commit Graph

3993 Commits

Author SHA1 Message Date
Lukas Matena
5123673b3a CMakeLists: filename fix so everything works on case-sensitive filesystems 2019-09-27 11:42:52 +02:00
Lukas Matena
661c91a821 Fixing Linux build 
GCC 4.8 does not fully support C++11 and in-class char array initialization
 2019-09-27 11:31:16 +02:00
bubnikv
4b35ebe6e5 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-09-27 09:52:57 +02:00
bubnikv
e65ab90c16 Fix of G-code path planning: Infill lines were incorrectly ordered 
for islands with another islands in their holes.

Improvement of chaining of infill lines for 3D honeycomb, Gyroid and
Honeycomb infill: New TSP chaining algorithm is used.
 2019-09-27 09:51:07 +02:00
bubnikv
d06831076d WIP: Consolidation of shortest path calculations, 
various chaining algorithms are replaced with the improved TSP
algorithm.
 2019-09-26 17:30:03 +02:00
bubnikv
10eecb2cab Reworked Traveling Salesman Problem code for simplicity and robustness. 
The TSP algorithm is newly used for planning of the printing order
of objects AND their instances.
 2019-09-26 16:39:50 +02:00
YuSanka
82bc243281 Implemented possibility to set a resin cost 2019-09-26 16:36:31 +02:00
bubnikv
8d4dd294b2 Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-26 09:44:53 +02:00
bubnikv
41495a932a Introduction of a greedy Traveling Salesman Problem algorithm, 
producing better shortest path estimate than the "closest next neighbor"
heuristics. The new greedy algorithm utilizes KD tree for closest
end point search, and builds a graph to detect loops.

PerimeterGenerator newly uses the optimized TSP algorithm.

ExtrusionEntity has been refactored / simplified.
 2019-09-26 09:44:38 +02:00
YuSanka
1a03b664b9 Some changes for alignments in manipulation panel 2019-09-25 15:04:39 +02:00
Enrico Turri
6f8a9bc1ff Fixed visual hints in 3D scene not disappearing when tabbing out of size z field in object manipulators sidebar 2019-09-25 13:05:18 +02:00
YuSanka
f6996b7dda Try to fix Linux build 2019-09-25 12:45:39 +02:00
Lukas Matena
dbc51a140d Fixed erroneous use of logical OR where bitwise OR was meant 
Also, PrintBase::SlicingStatus enum had two entries assigned to 0 - removed the one that was never used
 2019-09-25 12:18:30 +02:00
YuSanka
efb9ef37f6 Merge remote-tracking branch 'origin/master' into ys_manipulation_panel_rw 2019-09-25 11:33:19 +02:00
Enrico Turri
fdbe339622 Fixed gizmo scale for objects added to scene using the new context menu 2019-09-25 11:25:14 +02:00
YuSanka
6faf67d90c Add binding for ManipulationEditors 2019-09-25 11:25:05 +02:00
Lukas Matena
1d18339e62 PRUS.cpp: Fixed an always-true condition in extract_model_from_archive 
SupportMaterial.cpp: Simplified one condition (also solves a -Wmaybe-uninitialized warning on gcc)
 2019-09-24 18:09:48 +02:00
Lukas Matena
b67d8c1614 Fixed memsetting non-trivially-copyable types 
Types stl_stats, stl_normal and SurfaceFillParams should not be zeroed by memset
This is not correct and also triggered warnings on gcc
 2019-09-24 17:09:07 +02:00
Lukas Matena
7861fa5086 Whitespace changes to supress misleading indentation warnings 
These appear in newer gcc when spaces and tabs are mixed
 2019-09-24 16:01:01 +02:00
YuSanka
b2e7081d31 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-24 14:33:20 +02:00
YuSanka
9607fbeb6d Fix of SPE-1027 2019-09-24 14:32:59 +02:00
Enrico Turri
2fd5044460 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-24 14:13:22 +02:00
Enrico Turri
7c1706f7ee Follow-up of f4910cafed -> Fix extended to Mac 2019-09-24 14:13:03 +02:00
Lukas Matena
c1e3be9b27 MeshUtils.cpp: MeshRaycaster is now aware of the clipping plane 2019-09-24 12:58:12 +02:00
Enrico Turri
a68a72a660 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-24 09:11:43 +02:00
Enrico Turri
e6604afd05 #2972 - Fixed selection after adding an instance with autocenter active 2019-09-24 09:11:27 +02:00
Jason Tibbitts
197a1f95ff Relocate declaration of stl_internal_reverse_quads 
On little-endian hosts, stl_internal_reverse_quads will be called before
it is declared.  Move the declaration up to the beginning of the file to
fix build breakage seen on an s390x host.
 2019-09-24 08:54:35 +02:00
YuSanka
a234193dea Fixed localization for "Configuration Wizard" menu item 2019-09-23 16:29:07 +02:00
Enrico Turri
2dc9949a4c ENABLE_ENHANCED_RELOAD_FROM_DISK set as default 2019-09-23 15:35:49 +02:00
Enrico Turri
82a52e8b21 #2922 - Port of commit: f42edd35ce by jschuh 2019-09-23 14:56:27 +02:00
YuSanka
d90a27d5f8 Merge remote-tracking branch 'origin' into ys_manipulation_panel_rw 2019-09-23 14:37:06 +02:00
YuSanka
c0c937425f Added missed comment to 7e060f84bd 2019-09-23 14:24:53 +02:00
Enrico Turri
1115e77b38 ENABLE_ENHANCED_RELOAD_FROM_DISK -> Fixed export/import to/from .amf to keep compatibility with 3rd part software. 2019-09-23 13:54:49 +02:00
Enrico Turri
4a45c1aa41 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-23 12:34:18 +02:00
Enrico Turri
5eb4692442 ENABLE_ENHANCED_RELOAD_FROM_DISK -> Fixed export/import to/from .3mf to keep compatibility with 3rd part software. 2019-09-23 12:33:21 +02:00
tamasmeszaros
a6f5fe7bea Fix arrange crash with incorrect geometries. Guard the case with tests. 2019-09-23 11:59:44 +02:00
YuSanka
4aec14ddab Replace "mm3/s" with "mm³/s" in preview legend for a "Volumetric flow rate" 2019-09-23 11:11:43 +02:00
YuSanka
4e22761f95 Fix of #2977 2019-09-23 10:17:53 +02:00
Enrico Turri
c0576a8770 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-23 08:27:01 +02:00
Vojtech Kral
927ad5776c avrdude: Cherry-pick rev 1421 from upstream: 
Submitted by Reinhard Max patch #8311: Add IPv6 support to the
-Pnet:host:port option * ser_posix.c (net_open):
Rewrite to use getaddrinfo() rather than gethostbyname()

Fix #2918
 2019-09-20 17:17:07 +02:00
Lukas Matena
656569b0e9 Fix of https://github.com/prusa3d/PrusaSlicer/issues/2953 
printf-like function argument mismatch: num was long, which was obfuscated by the auto keyword
 2019-09-20 16:47:10 +02:00
YuSanka
89ebf1f1e8 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-20 11:30:53 +02:00
YuSanka
7e060f84bd Forcing of explicit SetWidth for the columns under OSX, as an attempt to fix a narrow column width on 4(5)K monitors under OSX 2019-09-20 11:30:29 +02:00
Enrico Turri
ac305a77b3 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-20 11:19:24 +02:00
Enrico Turri
d66bf7e1e1 Follow-up of 8aaff08355 -> Do not show the new context menu when the user pans the scene + cleanup 2019-09-20 11:19:06 +02:00
Lukas Matena
b241ba16ed Fixed layer profile equality check for wipe tower validation (fixup of b43003d) 2019-09-20 10:53:50 +02:00
YuSanka
a27026aa03 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-20 09:58:33 +02:00
YuSanka
8aaff08355 Added Possibility to create "shape" as an independent object from 3dScene, 
using right click on empty place
 2019-09-20 09:57:27 +02:00
Enrico Turri
9e09c52ab0 #2948 - Max zoom takes in account custom bed model size 2019-09-20 09:53:35 +02:00
bubnikv
110d5b9d56 Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-19 17:16:43 +02:00
bubnikv
6ce1011a09 Slic3r -> PrusaSlicer in config snapshot dialog. 2019-09-19 17:16:37 +02:00
YuSanka
e34ef1dd07 Merge remote-tracking branch 'origin/dev' into ys_manipulation_panel_rw 2019-09-19 15:39:13 +02:00
YuSanka
29f3c938e6 Fix of SPE-1026 (Height range value works differently if you press enter and if you leave textbox) 
Related to GH #2946
 2019-09-19 15:28:36 +02:00
YuSanka
381735581b Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-19 14:12:12 +02:00
YuSanka
ddf37d3b01 Fix under OSX for 584b37513f 2019-09-19 14:11:56 +02:00
Enrico Turri
0de8245432 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-19 14:03:05 +02:00
Enrico Turri
355a7d6a8c Fixed empty filename when trying to export a plate where no object is selected and no object is printable 2019-09-19 14:01:17 +02:00
Enrico Turri
74747226f7 ENABLE_ENHANCED_RELOAD_FROM_DISK 
1) Modified .zip.amf import/export to save/load volume matrices and source data

2) Incremented .zip.amf version to 3
 2019-09-19 12:39:59 +02:00
YuSanka
91311fc0a0 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-19 12:30:35 +02:00
YuSanka
584b37513f Implemented possibility to create "shape" as an object (#2865) 2019-09-19 12:30:16 +02:00
bubnikv
80c5eaacdf Merge remote-tracking branch 'remotes/origin/dev' into vk-materials 2019-09-19 11:49:49 +02:00
Enrico Turri
3a40565d03 Added tech ENABLE_ENHANCED_RELOAD_FROM_DISK 
1) Reworked void Plater::priv::reload_from_disk() to be more general

2) Added source data to class ModelVolume

3) Modified .3mf import/export to save/load volume matrices and source data

4) Incremented .3mf version to 2
 2019-09-19 09:09:11 +02:00
bubnikv
40e5fb5bb9 Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-19 08:57:04 +02:00
bubnikv
94212fa2a9 Another fix of admesh on big endian architectures, fixes #2879 2019-09-19 08:56:47 +02:00
YuSanka
67d7809418 Fixed font size and layouts for ObjectManipulation panel under OSX 2019-09-19 08:44:19 +02:00
YuSanka
c9c407cc2b Rewrote UI for ObjectManipulation without using of OptionsGrope 2019-09-18 15:10:36 +02:00
Lukas Matena
76a657ce52 Plater.cpp - better added a range-check when selecting filament color in purging volumes dialog 2019-09-18 12:54:21 +02:00
Lukas Matena
741e98804c Purging volumes dialog now uses filament colour in case extruder color is undefined 2019-09-18 11:47:19 +02:00
Vojtech Kral
107ff6fd36 Materials: Cleanup 2019-09-17 17:16:15 +02:00
Vojtech Kral
cb1ee5ce55 ConfigWizard: Add view mode setting page 2019-09-17 15:52:26 +02:00
Enrico Turri
cd7895065a Fixed typo 2019-09-17 15:48:39 +02:00
Enrico Turri
f4910cafed Fixed selection after adding a modifier by loading it from file 2019-09-17 15:30:54 +02:00
Lukas Matena
dd7eb0b186 Merge branch 'lm_raycasting_refactoring' into dev 2019-09-17 14:59:14 +02:00
Lukas Matena
6bcafd7c83 SLA gizmo no more uses IGL code directly, all was moved to the new MeshRaycaster class 2019-09-17 14:57:57 +02:00
Lukas Matena
1dfd8a0e62 MeshRaycaster class is now used in SLA gizmo when selecting by rectangle 2019-09-17 14:57:54 +02:00
Lukas Matena
3694bf3da9 Added functions get_hit_pos, get_hit_normal, ready to implement intersect_ray 2019-09-17 14:57:49 +02:00
Lukas Matena
b6292247e8 Unproject on mesh in the SLA gizmo is now performed by the MeshRaycaster class 2019-09-17 14:57:45 +02:00
YuSanka
0890c1417a Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-17 13:42:06 +02:00
YuSanka
93aa5ac6ce Fixed re-scaling under MSW for Layers editing 
+ Clean code in GUI_ObjectManipulation.cpp
 2019-09-17 13:41:44 +02:00
Vojtech Kral
c5a67ff931 WIP: filament/material filtering per selected printers 2019-09-17 13:20:06 +02:00
Vojtech Kral
9a465514ff Filament and material default installation based on enabled printers 2019-09-17 13:20:06 +02:00
Vojtech Kral
270008a3fd Add material_type config option for SLA materials, use in Wizard 2019-09-17 13:20:06 +02:00
Vojtech Kral
235b659cf9 WIP: ConfigWizard: 3rd party bundle installation roughly done 2019-09-17 13:20:06 +02:00
Vojtech Kral
dba9925c4e Move ConfigWizard instance in GUI_App, lazy-initialized, 
add filament/material installation item in Sidebar combo boxes
 2019-09-17 13:20:06 +02:00
Vojtech Kral
87b7b1cc1d Load default filament/material selections from vendor profiles 2019-09-17 13:20:06 +02:00
Vojtech Kral
34b3548102 Filaments and materials selection/installation 2019-09-17 13:20:06 +02:00
Enrico Turri
a93e63e296 Fixed object shifted after saving to/reloading from .3mf and .zip.amf a multivolume object with printable parts moved by user 2019-09-17 12:50:54 +02:00
Vojtech Kral
8e11a7b895 PresetUpdater: Fix: Sanitize downloadedsemver, fix #2927 
Use HTTPS for the slicer app version url
 2019-09-16 18:02:14 +02:00
bubnikv
83b6b82188 Refactored ExtrusionEntityCollection::flatten() 2019-09-16 16:35:08 +02:00
bubnikv
abf91c0327 Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-16 15:38:37 +02:00
YuSanka
13bde53955 Call update_config_values after deleting of a overridden option 2019-09-16 12:05:56 +02:00
YuSanka
a12e6a7bde More clear identification if is there object selected 2019-09-16 11:55:05 +02:00
YuSanka
284355d378 Fix of #2878 (endless warning loop in configuration update) 2019-09-16 10:22:26 +02:00
bubnikv
ae3a3029c0 Merge remote-tracking branch 'remotes/origin/master' into dev 2019-09-13 18:58:39 +02:00
bubnikv
d86cf1e116 Fix of a regression in wipe tower generator: 
Return to the known position after custom tool change G-code.
 2019-09-13 18:56:37 +02:00
bubnikv
145cf294c9 Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-13 16:21:48 +02:00
bubnikv
a9182fb0b3 Merge branch 'master' into dev 2019-09-13 16:19:35 +02:00
bubnikv
345d73e0d6 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-09-13 16:17:23 +02:00
bubnikv
ea8b6262cf Introduction of ClipperLib_Z: The Clipper library compiled with support 
of the Z coordinate, compiled in the ClipperLib_Z namespace.

Update of Lukas's new brim clipping:
All the brim contours are now clipped by the ClipperLib_Z library
in one shot.
 2019-09-13 16:16:37 +02:00
Lukas Matena
ee7132a23d Fixup of 4f89672 + allowing negative support_contact_z 2019-09-13 15:47:00 +02:00
bubnikv
4f89672816 Fixed false positives of missing layers due to support layer snapping 
to avoid layers thinner than min_layer height, and possibly due to
the fact, that empty support extrusions may get generated
for support layers with non-empty support polygons.

Fix of Empty layers detection added to GCode.cpp (6ab1cec)
 2019-09-13 15:18:42 +02:00
Lukas Matena
70c0c87598 Renamed MeshClipper.cpp/.hpp to MeshUtils.cpp/.hpp 
More helper classes like the MeshClipper could live here
Moved ClippingPlane class in here to start
 2019-09-13 12:03:53 +02:00
Lukas Matena
9782701dd4 Calculating the transformations is now only performed by the MeshClipper 
Attempted to get mirroring right (that never worked correctly with the clipping plane in the sla gizmo)
The transformation of the support mesh is kind of a mystery to me, hopefully it is right
Also cleaned the code a bit (removed commented-out code, unused variables, etc)
 2019-09-13 12:03:53 +02:00
Lukas Matena
546917830b Initial implementation of MeshClipper class 
So far the work is shared between the old code in GLGizmoSlaSupports.cpp and the new class
 2019-09-13 12:03:53 +02:00
Lukas Matena
cf23146ee3 Refactoring the SLA clipping plane 
The plane is now internally stored as a plane in world coordinates
 2019-09-13 12:03:53 +02:00
tamasmeszaros
177a96a768 Fix arrange crash with ASAN 2019-09-13 11:01:02 +02:00
bubnikv
bb896b4c13 Merge remote-tracking branch 'remotes/origin/lm_brimskirt' 2019-09-12 15:53:20 +02:00
Enrico Turri
7fe691f14e Merge branch 'et_reload_from_disk' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-12 10:46:32 +02:00
Enrico Turri
724cc19ae5 Fixed object position after reload from disk 2019-09-12 10:44:38 +02:00
bubnikv
b4f2df6a98 Merge remote-tracking branch 'remotes/origin/master' into dev 2019-09-12 10:19:09 +02:00
bubnikv
6f4fff1b29 Fix of 2.1.0-rc2 Fails to open "certain' STL files #2906 2019-09-12 10:16:52 +02:00
Enrico Turri
22ab022088 Merge branch 'et_reload_from_disk' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-11 15:36:23 +02:00
Enrico Turri
c55a463c93 Do not show intermediate states in objects list while reloading from disk 2019-09-11 15:31:30 +02:00
Enrico Turri
26f3af4b16 Fixed modifiers after reload from disk 2019-09-11 15:02:57 +02:00
bubnikv
15c8b579b2 Refactoring of ExtrusionEntity / ExtrusionEntityCollection: 
Iterator loops replaced with C++11 loops.
Fixed clone() methods to return an ExtrusionEntity*.
PerimeterGenerator now uses move semantics on ExtrusionEntity a little
bit more.
 2019-09-11 13:25:50 +02:00
tamasmeszaros
c37ec7463f Add new config values to SL1 zip file config.ini 
All requested config values are written into SL1 ini file inside the zip

* TIme.hpp and Time.cpp is now part of libslic3r instead of libslic3r_gui
* Updated time manipulation function: separate timestamp_local_str and timestamp_utc_str
* timestamp_utc_str is used in header_slic3r_generated(). Gcode now contains UTC timestamps
 2019-09-11 13:10:23 +02:00
bubnikv
b3f27b8fb9 Fixed typo in comments 2019-09-11 11:38:17 +02:00
bubnikv
0989cb8296 Refactoring of PerimeterGenerator: 
header interface was reduced,
compiler warnings removed.
 2019-09-11 11:37:48 +02:00
Enrico Turri
af77eca9df Follow-up of 44c3493f7d -> error message logged only for multi-extruder printers 2019-09-11 10:02:27 +02:00
Enrico Turri
b383d9581a Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-11 09:01:44 +02:00
Enrico Turri
3835257ec2 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-11 09:01:34 +02:00
Enrico Turri
7e5043961a Added missing include 2019-09-11 08:51:36 +02:00
Enrico Turri
44c3493f7d GCodeAnalyzer: Fixed a crash when encountering an invalid toolchange 2019-09-11 08:39:29 +02:00
bubnikv
9bdc5b7939 Merge remote-tracking branch 'remotes/origin/master' into dev 2019-09-10 19:09:41 +02:00
bubnikv
b9389f2d39 Some C++11 refactoring 2019-09-10 19:09:37 +02:00
bubnikv
413e737d7e Fix of previous infill refactoring. 2019-09-10 19:08:04 +02:00
bubnikv
246dc64c99 Fix of "Bridging and gap fill are parsed incorrectly when infill is set to 0" #1476 
The gap fill was disabled for zero infill.
Now the gap fill is enabled in between the perimeters, but disabled between
the inner-most perimeter and infill in case the infill is set to zero.

Also in case there are multiple infill regions inside a perimeter,
the mutliple infills are considered as non-zero if at least one infill
is non-zero, therefore the gap fill will be added inside the inner-most
perimeter.
 2019-09-10 19:03:37 +02:00
tamasmeszaros
84e8081413 Fix compilation on OSX 2019-09-10 14:00:48 +02:00
tamasmeszaros
1c20c4c43d Fix arrangement of objects larger than the print bed. Issue #2897 2019-09-10 13:31:29 +02:00
Lukas Matena
2fef16c39a Fix of #1266 and #2258 
In case there were empty object layers supposed to be floating on supports which were set to use a specific extruder, wipe tower was missing layer required to do the toolchange, leading to a crash
Such cases are now detected and layers that need it are additionally assigned as wipe tower layers

Also tracked as SPE-526
 2019-09-10 13:13:21 +02:00
Lukas Matena
4fc20090c8 GUI_ObjectList.cpp: Max layer height defaults to 0.75*nozzle_diameter as it should (#2892) 2019-09-10 12:34:03 +02:00
Lukas Matena
c5f78dd6e2 Some more warnings fixed (WipeTower.cpp/.hpp) 2019-09-10 12:08:43 +02:00
Lukas Matena
86b258f727 Fixed many warnings in following files: 
src/slic3r/Config/Snapshot.cpp
src/slic3r/GUI/Field.cpp
src/slic3r/GUI/GLToolbar.cpp
src/slic3r/GUI/GUI_ObjectList.cpp
src/slic3r/GUI/GUI_ObjectList.hpp
src/slic3r/GUI/Plater.cpp
src/slic3r/GUI/Plater.hpp
src/slic3r/GUI/PresetBundle.cpp
src/slic3r/GUI/Tab.cpp
src/slic3r/GUI/wxExtensions.cpp
 2019-09-10 12:08:43 +02:00
Lukas Matena
a62bba2508 CoolingBuffer.cpp: Fixed a crash when encountering an invalid toolchange 
This can happen if the user enters invalid toolchange through the custom gcodes
Such toolchange is now simply ignored by the CoolingBuffer, exporting gcode is NOT stopped, a log error is emitted
 2019-09-10 11:46:18 +02:00
Enrico Turri
27f01bb09e Fixed instance printable property after reload from disk 2019-09-10 11:16:59 +02:00
bubnikv
4585618aea Fix of "Bridge flow ratio doesn't trigger reslicing of support" #2359 2019-09-09 18:09:40 +02:00
bubnikv
6ba43ebacb Merge remote-tracking branch 'remotes/origin/master' into dev 2019-09-09 17:49:07 +02:00
bubnikv
ac7bae8c5d Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-09 17:47:41 +02:00
bubnikv
5c72eecf26 Fix of "Strange behavior on bridge detection" #1482 
The very first slicing step needs to be invalidated if support is
enabled or disabled while the soluble supports are configured,
as the bridging is disabled for soluble supports, while the bridging
is enabled with supports disabled.
 2019-09-09 17:47:29 +02:00
bubnikv
ee928f5f4d Replaced Perl style infill type enums with C++ enums in comments. 2019-09-09 16:47:15 +02:00
bubnikv
735f5146e9 Fix of d146a0237e 
(reworked infill generator to merge regions with the same properties).
 2019-09-09 16:44:29 +02:00
Vojtech Kral
f747b97564 FirmwareDialog: Attempt to fix window double close assertion #2619 2019-09-09 16:41:14 +02:00
Lukas Matena
4dbc8b22a5 Updated tooltip 2019-09-09 16:39:26 +02:00
Lukas Matena
97a02f4412 Merge branch 'lm_custom_toolchange' 2019-09-09 16:12:09 +02:00
tamasmeszaros
796d0fbd81 Fix typo 2019-09-09 16:08:19 +02:00
Lukas Matena
822bc7a91c Fix of previous commit, tooltip update 2019-09-09 16:02:39 +02:00
Enrico Turri
6507b7bf39 Fixed gizmos update after objects loading 2019-09-09 15:55:04 +02:00
Enrico Turri
eae02f6cad Fixed handling of mouse left up event when moving an object while the place on face gizmo is active 2019-09-09 14:56:55 +02:00
Lukas Matena
499fdeddd1 Custom toolchange gcode is searched for tool-changing command 
If the custom toolchange gcode switches extruder to the one that is expected, PrusaSlicer does not issue its own T command
Otherwise, this command is inserted just after the custom gcode, even in case it is not empty
This should prevent issues such as #2884 and #2886 from being reported
 2019-09-09 13:05:18 +02:00
Enrico Turri
749a1863e5 Fixed rotate gizmo hovering 2019-09-09 12:11:49 +02:00
Enrico Turri
015d430f03 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-09 11:51:03 +02:00
Enrico Turri
a30c35d240 Follow-up of 9b5edbfa5f -> added comments 2019-09-09 11:50:19 +02:00
bubnikv
751b9e69fa Fixed stack overflows in G-code generator. 2019-09-09 10:18:17 +02:00
Enrico Turri
d954a70bbf Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-09 09:56:52 +02:00
Enrico Turri
9b5edbfa5f Fixed import from obj files 2019-09-09 09:56:36 +02:00
bubnikv
42e41dae04 Fix of a regression big endian issue in admesh 
fixes 2.1.0-rc build error in admesh (unusual architecture only) (#2879)
 2019-09-09 09:18:53 +02:00
Enrico Turri
ae0fc75b13 Merge branch 'et_reload_from_disk' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-09 08:42:39 +02:00
Enrico Turri
98d8fa37c9 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-09 08:28:16 +02:00
Enrico Turri
19616c4f93 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-06 17:53:17 +02:00
Enrico Turri
e6366894da Fixed object settings after reload from disk 2019-09-06 17:26:08 +02:00
Enrico Turri
5b60fe272a Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-06 17:25:39 +02:00
Vojtech Kral
d096804a24 Fix a few warnings in PrintHostDialogs, UploadDialogs 2019-09-06 16:33:00 +02:00
Enrico Turri
9cf3793aac Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-06 16:06:37 +02:00
Lukas Matena
a985a2720f Fixed some more warnings, moved function to get ExtrusionRole name into ExtrusionEntity.hpp 
So it can be called from wherever it may be needed
 2019-09-06 15:55:07 +02:00
Lukas Matena
3f988b314c Fixed several warnings (Config.hpp and few other files) 2019-09-06 15:55:07 +02:00
Enrico Turri
abd170fbf4 Follow-up of 6c3aae8f89 -> Fixed update of objects list when object has a unique instance 2019-09-06 15:50:54 +02:00
Vojtech Kral
34821df6eb Fix bad pointer dereference in ObjectList::list_manipulation() 
Fix of #2875
 2019-09-06 15:28:58 +02:00
Vojtech Kral
3b498f687c Fix a few error messages in avrdude 2019-09-06 15:14:28 +02:00
Enrico Turri
6c3aae8f89 Fixed update of instances in objects list after reload from disk 2019-09-06 15:10:07 +02:00
bubnikv
48ecbe777f Fix of "excess infill below bridges with 0% infill" #442 
Fix of "Bridging infill not connecting with infill set to 0%" #1301

Top, bottom and bridging areas are extended into infill as long
as the infill is not zero. If the infill is zero,
top, bottom and bridging areas wound not expand into these "void" areas.

With this commit, the top, bottom and bridging areas are allowed to expand
into the "void" areas as long as these "void" areas are supported below
with perimeters or some other non-empty infill, and slightly beyond
these supporting areas into the voids (currently hard coded to 1mm).
 2019-09-06 15:03:49 +02:00
Enrico Turri
4f1747d5f6 Keep correct instance selection after reload from disk 2019-09-06 14:36:47 +02:00
Enrico Turri
fe07bde385 Do not render intermediate states while reload from disk action is taking place 2019-09-06 13:49:15 +02:00
Enrico Turri
a7a01bfc72 Keep selection after reload from disk 2019-09-06 13:11:20 +02:00
Enrico Turri
d6c3c766aa Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into et_reload_from_disk 2019-09-06 12:22:45 +02:00
Enrico Turri
bda0246b5d Fix of #2868 -> Revert 2c9521c6d2 and partial revert of fab3634931 2019-09-06 09:44:39 +02:00
Lukas Matena
6cc29c308c Fill.cpp: Fixed a typo 2019-09-05 16:03:44 +02:00
YuSanka
c4d90ed47a Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-05 15:31:38 +02:00
YuSanka
4263fa8dff DoubleSlider refactoring 2019-09-05 15:31:22 +02:00
bubnikv
07798510fc Fighting the ASCII STL import. 
Fix of 2.1.0-rc: Loading MMU STL's results in object placement off the plater (#2868)
It has been broken with 9abef2241d
when trying to fix "Error on importing stl" #2813
 2019-09-05 14:29:34 +02:00
Enrico Turri
bdbaecb7f8 Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-05 09:55:08 +02:00
Enrico Turri
9b550fbd5b Improved time estimator post-processing 2019-09-05 09:54:44 +02:00
YuSanka
1651c8db6e Fixed ColorPrint Legend update if Print preset was changed and model was resliced. 2019-09-05 09:13:59 +02:00
Enrico Turri
3f5511faa3 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-05 08:14:34 +02:00
bubnikv
d2ac827137 Merge branch 'dev' of https://github.com/Prusa3d/PrusaSlicer into dev 2019-09-04 16:11:28 +02:00
bubnikv
d146a0237e WIP: Reworked the infill generator to merge areas with the same 
properties.

Note for Vojtech:
Review src/libslic3r/Fill/Fill.cpp once again,
add test for G-code generator properties (extrusion speed, cooling?)

Fixes Modifier slice/move efficiency #1005
 2019-09-04 16:11:16 +02:00
Lukas Matena
09e4ac42ba Fixed some more warnings (mostly GLGizmoSlaSupports.cpp) 2019-09-04 16:05:32 +02:00
Lukas Matena
570bec299f Merge branch 'master' into dev 2019-09-04 15:50:18 +02:00
Lukas Matena
326eb5e343 GUI_ObjectList.cpp: Fixed a crash when deleting instances. 
Deleting second-but-last instance deletes the whole Instances node, we must select object node in that case.
 2019-09-04 15:15:35 +02:00
tamasmeszaros
642442c977 Fix typo 2019-09-04 15:15:10 +02:00
Lukas Matena
805a5d22a1 Fixed couple of warnings in WipeTower.cpp, ToolOrdering.cpp and GCode.cpp 2019-09-04 14:56:35 +02:00
YuSanka
8c43b04970 Fixed debug crash in update_changed_tree_ui 
Reproduce: For MK2.5S printer preset set flag "Support stealth mode"
 2019-09-04 14:37:09 +02:00
YuSanka
229eff72d6 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-04 13:21:13 +02:00
YuSanka
aab3001b24 Added DoubleSlider::epsilon() to get a permissible error for layer height 2019-09-04 13:16:44 +02:00
bubnikv
a09bb3802b Updated the bundled Prusa Research profiles. 
Bumped up the version number to 2.0.0-rc.
Changed the location of profiles from PrusaSlicer-beta to PrusaSlicer
(that is the location for the released software).
 2019-09-04 12:50:43 +02:00
YuSanka
200ac4c35e Fixed layer Z rounding for ticks on DoubleSlider 2019-09-04 11:36:26 +02:00
Enrico Turri
308f601a99 Removed another bunch of compile warnings 2019-09-04 10:46:51 +02:00
Enrico Turri
6bbc97f24d Removed a bunch of compile warnings 2019-09-04 09:47:00 +02:00
YuSanka
db2319cb5c Fixed sidebar layouts for selected "Object" and "Layers" items in ObjectList 2019-09-04 09:24:44 +02:00
YuSanka
6b95c579af Fixed an adding of color change tick on last layer 2019-09-04 08:53:21 +02:00
YuSanka
5ae23a242b Try to fix asserts from wxBitmapCombobox 2019-09-03 15:30:37 +02:00
YuSanka
6befe7099b Fixed couple of warnings in Field.cpp, GUI_App.cpp and OptionsGroup.cpp 2019-09-03 10:59:04 +02:00
YuSanka
f73976ec8f Merge branch 'dev' of https://github.com/prusa3d/PrusaSlicer into dev 2019-09-03 10:29:29 +02:00
YuSanka
c960c2cf27 Code clean in Tab.cpp and Fixed couple of Mac-warnings in : 
GUI.cpp
GUI_App.cpp
GUI_ObjectList.cpp
MainFrame.hpp
Plater.cpp
PresetBundle.cpp
PresetHints.cpp
Tab.cpp
Tab.hpp
wxExtensions.cpp
wxExtensions.hpp
 2019-09-03 10:29:17 +02:00
Lukas Matena
fd47891793 GLGizmoSlaSupports.cpp: Snapshot label now differs for turning the gizmo on/off 
This behaviour was broken by recent merge
 2019-09-03 10:16:06 +02:00
Lukas Matena
b89d9c7aff Merge branch 'lm_gizmomanagerrefactoring' into dev 2019-09-03 08:29:31 +02:00
YuSanka
9e73674578 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-02 16:49:41 +02:00
YuSanka
ac4730bc7e Fix of SPE-1015 (Colorchange doesn't work correct on last and first layers) 2019-09-02 16:49:17 +02:00
Lukas Matena
66d74bc591 Merge branch 'lm_layer_height_validation' into dev 2019-09-02 16:31:59 +02:00
Lukas Matena
7d54b04699 Merge branch 'lm_wiping_dialog_colors' into dev 2019-09-02 16:31:22 +02:00
Lukas Matena
9ac6909d30 Fixed couple of warnings in GUI_ObjectList.cpp and GUI_ObjectSettings.cpp 2019-09-02 16:27:48 +02:00
Lukas Matena
942f959e87 Fixed couple of warnings 
Turned several includes into forward declarations
Removed several sprintf calls in favor of std::to_string
 2019-09-02 16:27:48 +02:00
Enrico Turri
0dfeee6caf Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-02 15:15:36 +02:00
Enrico Turri
d0513fc2da Fixed update of application's title bar when trying to import a non compatible .3mf or .amf project 2019-09-02 15:15:28 +02:00
YuSanka
fdb51912c2 Fixed SPE-1014 (Support settings in context menu for modifier) 2019-09-02 14:44:00 +02:00
Lukas Matena
19ab746a38 Merge branch 'master' into lm_gizmomanagerrefactoring 2019-09-02 14:31:03 +02:00
Lukas Matena
d8a274c5ab Nearly finished refactoring of GLGizmoManager 2019-09-02 14:30:15 +02:00
Lukas Matena
409a7c7734 SLA gizmo open/close should be saved on undo/redo stack 2019-09-02 14:30:15 +02:00
Lukas Matena
b6d35c9840 Started an attempt to refactor GLGizmoManager 2019-09-02 14:30:12 +02:00
YuSanka
dba5dd36f7 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-02 14:02:47 +02:00
YuSanka
94712544aa Fix for #2845 
+ Fixed get_config_value for coFloatOrPercent (percent mode allow non-just-int values)
 2019-09-02 14:02:26 +02:00
Enrico Turri
729bd529dc Fixed typo 2019-09-02 13:02:28 +02:00
Enrico Turri
bbfe420769 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-02 11:56:33 +02:00
Enrico Turri
0b03f0eb66 2nd attempt to fix non compatible (newer) .3mf and .amf import error handling on Linux and OsX 2019-09-02 11:55:14 +02:00
bubnikv
1e5a14a06c Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-09-02 11:47:23 +02:00
bubnikv
206dbb81c7 Fix of "Extra overhanging perimeters are added in 2.1.0-beta3" #2857 
Two bugs were fixed:

1) An entry in the GLVolume index was not always created when it should
	have been.

2) Removing empty volumes from the list of GLVolumes did not update
	the GLVolume index. This is an old issue, but it likely surfaced
	now with the introduction of splitting the large GLVolumes
	into multiple shorter ones.
 2019-09-02 11:47:11 +02:00
YuSanka
107bb1a308 Fix of #2850 2019-09-02 10:53:07 +02:00
YuSanka
e247d66889 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-09-02 10:07:31 +02:00
YuSanka
82f89229a9 Fixed side effect after changes in 54cf0f22d5 
+ Code cleaning
 2019-09-02 10:06:19 +02:00
Enrico Turri
813a73e614 Attempt to fix non compatible (newer) .3mf and .amf import error handling on Linux and OsX 2019-09-02 09:38:45 +02:00
bubnikv
eb458163e3 Fixing stack overflow issues when slicing in SLA mode: 
The BackgroundSlicingProcess thread will now have the same stack size
allocated as the TBB worker threads:
4MB on 64bit systems and 2MB on 32bit systems.
 2019-08-30 17:57:53 +02:00
bubnikv
415b0b28c3 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-08-30 16:05:19 +02:00
bubnikv
ae3a72d291 Fixed menu icons for undo / redo. 2019-08-30 16:05:12 +02:00
tamasmeszaros
17a7f58828 Revert full parallel support tree generation to partially parallel. 2019-08-30 15:13:40 +02:00
bubnikv
018311e668 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-08-30 14:13:59 +02:00
bubnikv
931b20e43c Fix for wxWidgets issue, where the FindLanguageInfo() returns locales 
with undefined ANSII code (wxLANGUAGE_KONKANI or wxLANGUAGE_MANIPURI).
 2019-08-30 14:13:47 +02:00
Enrico Turri
f1f1b515cd Fixed update of both canvas when compressed bed textures have been completely sent to gpu 2019-08-30 14:10:59 +02:00
Enrico Turri
f26d5effd9 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-08-30 10:33:38 +02:00
Enrico Turri
bb65ad6f2c Do not apply out of bed detection for non printable volumes 2019-08-30 10:33:21 +02:00
bubnikv
4d224b1b82 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-08-30 10:20:50 +02:00
bubnikv
9dda1f10a2 Updated the initial language detection to provided some logging. 2019-08-30 10:20:38 +02:00
Enrico Turri
beed31ad58 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-08-30 09:35:50 +02:00
Enrico Turri
54cf0f22d5 Fixed missing printable icon for 1st instance in objects list when opening a project containing objects with multiple instances 2019-08-30 09:35:34 +02:00
bubnikv
3d8f3116c1 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2019-08-30 09:20:14 +02:00
bubnikv
b305a6b37e Fix of 2.1.0-beta2 Linux AppImage - OpenGL detection fails #2844 
The OpenGL check was moved to GLCanvas3DManager init function,
where the OpenGL context is active at the 1st render event.
 2019-08-30 09:19:45 +02:00
Lukas Matena
b43003dfad Fixed layer height equality check needed in order to enable the wipe tower 
The change was needed because enabling the new layer-height-modifier made the validation fail, even if there was no real layer height modification
 2019-08-29 16:13:04 +02:00
Enrico Turri
a8f7bb54a5 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2019-08-29 15:38:43 +02:00
Enrico Turri
05c4976232 Do not automatically start slicing when switching to gcode preview if the Slice Now button is disabled 2019-08-29 15:38:21 +02:00
bubnikv
78697b2acf Improvement of selection of language / dictionaries. 
When switching the languages, if the newly selected dictionary
is "compatible" with the system best language or user's locale,
then the system best language locale or user's locale is activated,
not the locale connected to the dictionary.
 2019-08-29 15:35:28 +02:00
bubnikv
ace275af7f std::make_unique is not supported by our build servers. 
use Slic3r::make_unique instead
 2019-08-29 14:51:24 +02:00
bubnikv
468abfefbc Reworked selection of locales and translation dictionaries. 
Slicer now tries to heed user's locales, also it tries to switch
to the language recommended by the operating system (Windows & OSX
specific).
 2019-08-29 14:07:45 +02:00