Mark Hindess
07f2dab5f6
Fix perimeters_* options to be singular to be consistent.
2012-06-30 23:18:15 +01:00
Alessandro Ranellucci
cbb111ee64
Fix for incomplete commit causing thin gaps to throw an error
2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
b9008a99f9
Fill the gaps while doing normal infill to avoid extra travel
2012-06-30 16:33:01 +02:00
Alessandro Ranellucci
5eb1982081
Bugfix: brim was extruded multiple times when sequential printing was enabled
2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933
Revert "Reduce memory usage during gcode output by discarding processed layers."
...
This reverts commit 4d1551c305
2012-06-30 16:12:06 +02:00
Alessandro Ranellucci
d5c9b74377
Allow scaling factor to be at least 2540 to allow the conversion of inch models
2012-06-29 20:46:51 +02:00
Mark Hindess
b4a21bea40
Fix for #499 .
2012-06-29 17:02:37 +01:00
Mark Hindess
4d1551c305
Reduce memory usage during gcode output by discarding processed layers.
...
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big. So this removes
the list entry after it's been processed.
2012-06-29 12:33:30 +01:00
Mark Hindess
2e1649e6b5
Comment out code that builds @vertices_facets data structure.
...
Saves memory and speeds up reading large models.
2012-06-28 19:58:21 +01:00
Alessandro Ranellucci
fb96cdec76
Command line options to assign perimeters and infill to different extruders
2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
80501d5b3c
New option to customize support material extrusion width
2012-06-28 16:33:07 +02:00
Alessandro Ranellucci
f9f2361acb
Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture
2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66
Rename support_material_tool to support_material_extruder
2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
3e8bc73fcb
Fix typo in previous commit
2012-06-28 14:49:20 +02:00
Alessandro Ranellucci
898266fd34
Initial refactoring for supporting multiple extruders. Little speed optimization included
2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
92460ba902
Bugfix: the plater didn't remember last input file directory. #485
2012-06-27 20:27:46 +02:00
Alessandro Ranellucci
eea6d84314
Bugfix: infill extrusion width was ignored
2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
47a07a86ee
Bugfix: GUI was unable to update flow settings
2012-06-27 19:49:53 +02:00
Alessandro Ranellucci
96a3234eaa
Different speed for external perimeters. #488
2012-06-27 19:42:16 +02:00
Mark Hindess
cc330932d6
Revert "Simple remote interface to slic3r using plack."
...
This reverts commit a3af688173
2012-06-27 17:58:27 +01:00
Mark Hindess
a3af688173
Simple remote interface to slic3r using plack.
...
Only supports a single stl model but supporting other file formats and
merge would be quite simple. Speed might mean requests timeout if
slicing takes too long. Just a proof-of-concept really but I might
use it to slice on my server from my laptop.
2012-06-27 17:42:34 +01:00
Mark Hindess
a49827f5ab
Revert "Fix license to match README."
...
This reverts commit 7d858338fa
2012-06-27 07:15:30 +01:00
Mark Hindess
840752194f
Speed up encloses_point calls from medial_axis code.
...
The points shouldn't be on hole borders so we can make the check
much quicker. Gives over 50% speed up slicing reprap shot glass
(thing:11944) with default settings and 0.3 layer height.
2012-06-26 23:11:46 +01:00
Mark Hindess
7d858338fa
Fix license to match README.
2012-06-25 23:00:50 +01:00
Mark Hindess
1d3f7e0b1c
Trivia: Remove duplicate word "speed".
2012-06-25 22:57:05 +01:00
Alessandro Ranellucci
3a8f4015d6
Don't reset E when the makerbot flavor is selected
2012-06-24 21:05:44 +02:00
Alessandro Ranellucci
0938c73d08
Revert "Don't reset E when the makerbot flavor is selected"
...
This reverts commit 2e5e5983be
2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be
Don't reset E when the makerbot flavor is selected
2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
f057dd4818
Bump version number to the correct one
2012-06-24 17:21:27 +02:00
Alessandro Ranellucci
73655d7ccc
Bump version number
2012-06-24 17:18:29 +02:00
Alessandro Ranellucci
0372d06247
Releasing 0.8.4
2012-06-24 16:50:09 +02:00
Alessandro Ranellucci
a4dcbd62da
Remove recursion warning for Douglas-Peucker
2012-06-24 16:37:59 +02:00
Alessandro Ranellucci
f88f516c30
Optimize honeycomb travels
2012-06-24 16:09:24 +02:00
Alessandro Ranellucci
a6dca1d82a
New option for support material pattern spacing; also, fixes and speedups to the overhang detection
2012-06-24 14:39:35 +02:00
Alessandro Ranellucci
36753d85b7
New option to define the overhang threshold angle for support material generation
2012-06-23 23:54:39 +02:00
Alessandro Ranellucci
07daefeddb
Require Moo 0.091009
2012-06-23 23:28:21 +02:00
Alessandro Ranellucci
1fb44474a9
Connect support material paths
2012-06-23 22:58:12 +02:00
Alessandro Ranellucci
bf1aba3d08
New --support-material-pattern and --support-material-angle options
2012-06-23 22:43:23 +02:00
Alessandro Ranellucci
e72bd56b9d
Rename brim_thickness to brim_width
2012-06-23 22:27:59 +02:00
Alessandro Ranellucci
a9d480f7bf
Bugfix: first layer extrusion width was computed on general layer height rather than first layer height. #465
2012-06-23 21:45:18 +02:00
Alessandro Ranellucci
48addf8c3f
New feature: brim. #424
2012-06-23 21:31:29 +02:00
Alessandro Ranellucci
53d24bc580
Bugfix: some infill paths were not connected. #477
2012-06-23 20:27:28 +02:00
Alessandro Ranellucci
ac08cf7469
Disable arc compensation code
2012-06-23 20:19:58 +02:00
Alessandro Ranellucci
44c636aea1
Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462
2012-06-23 20:08:08 +02:00
Alessandro Ranellucci
20229fccdb
Bugfix: fatal error when a layer contained nothing
2012-06-23 18:31:24 +02:00
Alessandro Ranellucci
464400a37b
Bugfix: when skirt distance was set to zero, the first loop coincided with the outer perimeter of the object
2012-06-23 17:44:05 +02:00
Alessandro Ranellucci
05e4571310
Do perimeters from outside to inside. #466
2012-06-23 17:41:44 +02:00
Alessandro Ranellucci
410279823c
New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459
2012-06-23 17:10:30 +02:00
Mark Hindess
f61a1f5a07
Create *::Geometry::nearest_point_index to speed up shortest_path method.
...
This fix gives a further 10% speedup on simcop2387's coaster.
2012-06-22 23:12:39 +01:00
Mark Hindess
62eb41b967
Manage flattened endpoint list rather than creating it at every iteration.
...
Gives an 8% speedup on simcop2387's coaster for me.
2012-06-22 23:12:39 +01:00
