Alessandro Ranellucci
c9f68ed28a
Refactor E code and keep track of per-extruder consumend filament
2013-08-28 20:40:13 +02:00
Alessandro Ranellucci
b3f1795cb4
Reduce wipe feedrate a bit
2013-06-03 22:49:47 +02:00
Alessandro Ranellucci
71608e799e
Keep per-extruder E absolute value for Makerbot flavour to avoid any G92 E0. #950
2013-06-03 15:27:58 +02:00
Alessandro Ranellucci
7de8b20bc4
New wipe feature
2013-03-17 02:22:50 +01:00
Alessandro Ranellucci
460e169c67
New option to disable retraction on layer change
2013-03-09 20:05:43 +01:00
Alessandro Ranellucci
a9090688f9
Refactor bridge flow to Slic3r::Flow::Bridge class
2013-02-27 10:43:50 +01:00
Alessandro Ranellucci
dc4ada2374
Fix retraction tests and fix retract_extra_length and lift in multiple extruders environments
2012-12-21 15:14:44 +01:00
Alessandro Ranellucci
e9ae62a9d1
New --min-skirt-length option. #269
2012-10-29 11:17:57 +01:00
Alessandro Ranellucci
e696764af8
Assign extruders and flows to materials
2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
9e682924c7
New separate options for retraction length to be used when switching tools
2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
075213c731
Refactoring: make 'retracted' an attribute of the Extruder object
2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
9ca21c835c
Merge branch 'per-extruder-retraction-settings'
...
Conflicts:
lib/Slic3r/Config.pm
lib/Slic3r/GUI/Tab.pm
2012-08-08 22:06:47 +02:00
Alessandro Ranellucci
866b09f3f9
New --extruder-offset option
2012-08-07 21:39:45 +02:00
Alessandro Ranellucci
cf01c142de
Make retraction configurable for each extruder
2012-08-07 21:08:56 +02:00
Alessandro Ranellucci
63e77fcfd8
Refactor extruder settings
2012-08-07 20:50:54 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
77123ada7c
New spacing math. Speed optimizations
2012-07-04 09:33:33 +02:00
Alessandro Ranellucci
dd37867324
Bugfix: wrong spacing was calculated
2012-07-04 09:33:33 +02:00
Alessandro Ranellucci
f9f2361acb
Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture
2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
898266fd34
Initial refactoring for supporting multiple extruders. Little speed optimization included
2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
96a3234eaa
Different speed for external perimeters. #488
2012-06-27 19:42:16 +02:00
Alessandro Ranellucci
3a8f4015d6
Don't reset E when the makerbot flavor is selected
2012-06-24 21:05:44 +02:00
Alessandro Ranellucci
0938c73d08
Revert "Don't reset E when the makerbot flavor is selected"
...
This reverts commit 2e5e5983be
2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be
Don't reset E when the makerbot flavor is selected
2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
48d345c189
Bugfix: first_layer_speed was accepting mm/m values rather than mm/s when expressed as absolute. #452
2012-06-17 19:42:11 +02:00
Alessandro Ranellucci
217a6f2525
Bugfix: any retraction_lift value different from "0" caused no retraction before layer changes. #453
2012-06-17 19:36:02 +02:00
Alessandro Ranellucci
0c4b112718
Fixed regression preventing arcs to be generated at all (center detection is still buggy)
2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
0226039dfb
Fixed regression when cooling is enabled
2012-06-07 11:38:54 +02:00
Alessandro Ranellucci
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f
Bugfix: not retracting between infill of different islands using low infill densities. #242
2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666
Lift Z when changing layer too
2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
896c7e952e
Renamed bottom_layer_speed to first_layer_speed for consistency
2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
91ffb74429
Accept either absolute or relative values for --bottom-layer-speed. #151
2012-06-06 15:43:54 +02:00
Alessandro Ranellucci
4db416773c
Fixed typos in bed temperature M-codes. #386
2012-05-29 09:40:42 +02:00
Alessandro Ranellucci
ce6b4aeaee
New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape)
2012-05-20 20:08:59 +02:00
Alessandro Ranellucci
fa4f2c8b97
New option to randomize starting points across layers
2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
22f8d57b36
Memory optimizations broke thin walls
2012-05-19 19:40:51 +02:00
Alessandro Ranellucci
b246480535
Massive reduction of memory usage (down to one third).
2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
2d67d6b0b6
Restore 100% flow for support material
2012-05-17 22:57:59 +02:00
Alessandro Ranellucci
2a6ad2f3f7
Bugfix: removed warnings. #365
2012-05-13 22:56:40 +02:00
Alessandro Ranellucci
d58a741d99
Put layer number in G-code comments. #327
2012-05-01 15:06:19 +02:00
Alessandro Ranellucci
d8b8470d54
Retract before changing tool. #319
2012-05-01 14:44:52 +02:00
Alessandro Ranellucci
3ed5171d20
Take bottom layer speed ratio into account when estimating layer time. #334
2012-05-01 11:48:22 +02:00
Alessandro Ranellucci
e7558ce16c
Bugfix: wrong flow amount for solid layers. #317
2012-04-17 09:29:41 +02:00
Alessandro Ranellucci
285caffa9c
Omit G92 if No Extrusion
2012-04-16 20:06:53 +02:00
Alessandro Ranellucci
8d851c24a9
Increase the flow rate for support material
2012-04-16 14:18:07 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
