Alessandro Ranellucci
954520cba5
Enable cooling by default
2013-01-17 10:40:45 +01:00
Alessandro Ranellucci
4bff4d0d50
Ignore perimeter_acceleration and infill_acceleration if their values are 25 and 50 to handle legacy configs gracefully.
2013-01-15 12:52:22 +01:00
Alessandro Ranellucci
ad9be0e4d7
Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865
2013-01-13 10:18:34 +01:00
Alessandro Ranellucci
32fd58d531
Acceleration control. #185
2013-01-10 15:29:40 +01:00
Alessandro Ranellucci
34e047205a
Automatic detection of support material threshold angle
2013-01-02 19:40:48 +01:00
Alessandro Ranellucci
e59ed7efb7
New toolchange_gcode option. #547
2012-12-23 16:29:08 +01:00
Alessandro Ranellucci
b70404bb23
Disable gap filling if gap fill speed is set to zero
2012-12-17 19:55:25 +01:00
Alessandro Ranellucci
142a6cc4eb
Add --vibration-limit back to CLI usage and disable it by default
2012-12-05 17:57:35 +01:00
Alessandro Ranellucci
cf32cd6510
Implement vibration limit using G4 pauses
2012-12-05 15:03:36 +01:00
Alessandro Ranellucci
0f0992e39a
Speed for support material. #813
2012-11-23 17:20:26 +01:00
Alessandro Ranellucci
5dba02fdeb
New separate speed setting for gap fill. #785
2012-11-23 11:25:02 +01:00
Alessandro Ranellucci
21a6219b62
Disable vibration limit. #785
2012-11-23 11:14:06 +01:00
Alessandro Ranellucci
124a1fd84e
Raise default frequency limit to 25Hz
2012-11-19 18:03:49 +01:00
Alessandro Ranellucci
99c942b5ea
Merge branch 'vibration-limit'
2012-11-19 15:54:50 +01:00
Alessandro Ranellucci
e119cee66c
Don't emit warnings on unknown options
2012-11-18 17:42:52 +01:00
Alessandro Ranellucci
600e951fd8
Completed vibration limit
2012-11-17 12:08:19 +01:00
Alessandro Ranellucci
96dd106f61
Initial work for limiting vibrations
2012-11-17 10:40:15 +01:00
Alessandro Ranellucci
a5a0f32e19
Expose all SLIC3R_* environment variables as placeholders. #781
2012-11-16 10:07:30 +01:00
Alessandro Ranellucci
0a5016a509
Cleaner usage of the PI constant
2012-10-30 14:15:48 +01:00
Alessandro Ranellucci
e9ae62a9d1
New --min-skirt-length option. #269
2012-10-29 11:17:57 +01:00
Alessandro Ranellucci
935173047a
Allow [print_center_X] and [print_center_Y] syntax for all coordinates settings (including bed_center etc.) and [temperature_0], [temperature_1] etc. for all index-based settings
2012-10-28 17:23:35 +01:00
Alessandro Ranellucci
deea02b444
Descriptive textual feedback for cooling settings
2012-10-28 12:43:41 +01:00
Alessandro Ranellucci
667d88603e
Reorder some options using the more compact layout
2012-10-25 12:37:02 +02:00
Alessandro Ranellucci
cee3864fc9
Independently set number of top/bottom solid layers. #676
2012-10-25 12:21:04 +02:00
Alessandro Ranellucci
ab7697ec1c
New option to force a solid layer every given number of layers. #617
2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
9ee9b54c73
Output an error if user tries to use 100% density with a non-solid fill pattern. #691
2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
c6c7dd12da
Silently ignore threads > 1 on non-threaded perls
2012-09-21 16:43:46 +02:00
Alessandro Ranellucci
37ae2e1e2d
Use support material extruder for brim. #653
2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
191de5d078
Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage)
2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
0c22250740
New option to disable retraction when moving between infill paths inside the same island. #29
2012-08-25 16:30:11 +02:00
Alessandro Ranellucci
92518d28fc
New option to configure the threshold for enforcing solid infill. #224
2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
d278998f11
Accept newline as separator for post-processing scripts in GUI. #615
2012-08-22 21:27:49 +02:00
Alessandro Ranellucci
9e682924c7
New separate options for retraction length to be used when switching tools
2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
8289692160
Handle configuration files saved while there was no extruder_offset control for the first extruder
2012-08-09 19:57:49 +02:00
Alessandro Ranellucci
2bf219a637
Bugfix: random failure to load presets. #600
2012-08-09 00:41:03 +02:00
Alessandro Ranellucci
9ca21c835c
Merge branch 'per-extruder-retraction-settings'
...
Conflicts:
lib/Slic3r/Config.pm
lib/Slic3r/GUI/Tab.pm
2012-08-08 22:06:47 +02:00
Alessandro Ranellucci
4fcecf5ef6
Bugfix: when an external config was selected in any section, exported settings didn't reflect other sections properly
2012-08-08 19:36:34 +02:00
Alessandro Ranellucci
3888727b96
Bugfix: legacy config files with empty temperature and/or first_layer_temperature caused crash
2012-08-08 16:25:13 +02:00
Alessandro Ranellucci
b048f51edd
Incomplete label for support material extruder option. #593
2012-08-08 15:21:02 +02:00
Alessandro Ranellucci
866b09f3f9
New --extruder-offset option
2012-08-07 21:39:45 +02:00
Alessandro Ranellucci
cf01c142de
Make retraction configurable for each extruder
2012-08-07 21:08:56 +02:00
Henrik Brix Andersen
57b134cc9c
Handle recursive ratio_over options correctly.
2012-07-27 22:56:35 +02:00
Henrik Brix Andersen
d68ab84faa
Fix quick slicing
2012-07-27 22:03:48 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Henrik Brix Andersen
f0579e59bd
Include timestamp in .ini files
2012-07-27 14:33:14 +02:00
Alessandro Ranellucci
1d364d7823
Refactor OptionsGroup to decouple it from the config repository, add ConfigOptionsGroup
2012-07-24 15:33:11 +02:00
Henrik Brix Andersen
ab9ffe9c19
Expose --external-perimeter-speed in the GUI. #556
2012-07-23 09:43:59 +02:00
Alessandro Ranellucci
30a2213fd9
Some multi-extruder options in GUI
2012-07-18 20:44:36 +02:00
Alessandro Ranellucci
b861560c71
Fix tooltips about extrusion widths
2012-07-18 18:16:27 +02:00
Alessandro Ranellucci
2495a77c0f
Add to GUI the setting for support material extrusion width. Also, populate %Groups with new options
2012-07-18 18:15:18 +02:00
