Alessandro Ranellucci
148c773319
Exclude support from bridged areas
2014-04-26 16:07:43 +02:00
Alessandro Ranellucci
7ac0095018
Fix regression causing default extrusion width to be ignored. #1958
2014-04-25 19:39:27 +02:00
Alessandro Ranellucci
f6897a346a
Fix islands not being ordered efficiently with the logic that completes each of them before moving to the next one (which is now the default behavior). #1137
2014-04-25 19:11:17 +02:00
Alessandro Ranellucci
6201aacf88
New coverage detection for bridges. Includes implementation of ExPolygon::get_trapezoids()
2014-04-24 13:44:39 +02:00
Petr Ledvina
802ebfb0d6
Fix bridge detector
...
Test line direction is changed to reflect 0=east angle system
Test patern rotation direction is reversed - $angle represents infill direction
Angle test is changed to avoid returning negative value (this does happen otherwise - adding increments to $angle
creates ~ 1e-15 rounding error)
2014-04-23 11:35:58 +02:00
Alessandro Ranellucci
9989ebaabd
Refactored the BridgeDetector class to expose a cleaner API and make it stateful
2014-04-22 00:59:14 +02:00
Alessandro Ranellucci
f7e8a99078
More tests and related fixes to bridge detection. #1917
2014-04-21 20:44:21 +02:00
Alessandro Ranellucci
15628a90ed
Regression test for numerical issues causing thin gaps between perimeters and infill. #1803
2014-04-18 17:30:35 +02:00
Alessandro Ranellucci
93f4fe05e1
Better logic for gap fill: don't subtract from fill surfaces those gaps that medial axis was unable to fill. Thanks ledvinap for the idea and proof of concept implementation. Includes a tolerance factor for avoiding being too strict when collapsing loops (allow some overlap if that helps avoiding triggering medial axis). #1803
2014-04-15 01:41:40 +02:00
Alessandro Ranellucci
e02d33bbce
Remove weak test. #1803
2014-04-15 00:57:43 +02:00
Alessandro Ranellucci
43ffb7d3e8
Bugfix: sometimes a tiny gap was left between infill and perimeters. Includes regression test. #1803
2014-04-15 00:22:31 +02:00
Alessandro Ranellucci
8e5ca0ab76
Fixed a couple typos
2014-04-09 00:36:13 +02:00
Alessandro Ranellucci
627f23d5fe
Make angle increment (i.e. angle resolution) configurable
2014-04-08 16:53:32 +02:00
Alessandro Ranellucci
38f6e3b643
More unit tests for bridge angle detection
2014-04-08 15:18:37 +02:00
Alessandro Ranellucci
9be57f750d
Some fixes to bridge direction detection. Includes regression tests
2014-04-08 14:51:55 +02:00
Alessandro Ranellucci
23e6abff49
Added first unit test for bridge direction
2014-04-08 13:08:42 +02:00
Alessandro Ranellucci
119778caa9
Refactoring: move bridge angle detection to a separate class for easier unit testing
2014-04-07 23:18:11 +02:00
Alessandro Ranellucci
432a87e73d
New option for forcing the generation of interface shells. #1847
2014-03-25 01:11:28 +01:00
Alessandro Ranellucci
5d3c8575c5
Bugfix: holes were not sorted using the nearest-neighbor search, resulting in inefficient paths. #1785
2014-03-23 19:55:31 +01:00
Alessandro Ranellucci
52de292a48
Fixed wrong refactoring of perimeter tree traversal. #1832
2014-03-15 02:16:04 +01:00
Alessandro Ranellucci
b71d28bd5a
Fix minor error and update MANIFEST
2014-03-11 19:19:34 +01:00
Alessandro Ranellucci
f344426873
Better linear gap fill, now with adaptive extrusion width
2014-03-11 19:08:14 +01:00
Alessandro Ranellucci
98b7ae0022
Initial implementation of linear gap fill
2014-03-09 21:26:03 +01:00
Alessandro Ranellucci
7f5442265e
Include thin walls in general top-level perimeter sorting to get more efficient paths
2014-03-09 20:19:30 +01:00
Alessandro Ranellucci
2a73ab988f
Recursive pruning. Some more unit tests
2014-03-09 17:46:02 +01:00
Alessandro Ranellucci
04d80ca392
Some improvements to pruning and some additions here and there
2014-03-05 18:43:01 +01:00
Alessandro Ranellucci
c2ed6090d3
Fix the max width supplied to medial axis code: it's up to two extrusions
2014-03-05 00:53:51 +01:00
Alessandro Ranellucci
4a894b1e20
Add safety offset to thin wall regions to prevent overlapping geometry and corrupt Voronoi diagram
2014-03-05 00:45:17 +01:00
Alessandro Ranellucci
3c77b301a7
Promising approach to medial axis pruning
2014-03-04 23:33:13 +01:00
Alessandro Ranellucci
8644440070
Minor improvements to SVG debug output for medial axis
2014-03-03 14:20:15 +01:00
Alessandro Ranellucci
eadffe4a9e
Merge branch 'master' into boost-medialaxis
...
Conflicts:
lib/Slic3r/Layer/Region.pm
xs/src/ExPolygon.cpp
xs/src/Point.cpp
xs/src/Point.hpp
xs/src/TriangleMesh.cpp
xs/t/01_trianglemesh.t
2014-03-02 22:36:20 +01:00
Alessandro Ranellucci
0f9e143ba1
Removed debugging line
2014-03-02 00:44:16 +01:00
Alessandro Ranellucci
2295d48947
Better pruning of thin walls to avoid unwanted extra extrusions. Includes regression test. #1794
...
Conflicts:
lib/Slic3r/Layer/Region.pm
2014-03-02 00:31:17 +01:00
Alessandro Ranellucci
dfd9bc8958
Bugfix: prevent fatal error in the rare case that no bridge anchors are found. #1607
2014-01-15 00:24:37 +01:00
Alessandro Ranellucci
a51743a8c1
Bugfix: lack of strong type checking when passing arrayref objects to XS caused random lack of infill. Now added strong type checking for all XS entities. Also fixes a potential issue with bridges caused by the same error. #1652
...
Conflicts:
lib/Slic3r/Layer/Region.pm
2014-01-12 00:54:10 +01:00
Alessandro Ranellucci
7b0decbeb1
Finished implementing Boost.Polygon medial axis. Some cleanup needed
2014-01-10 16:18:55 +01:00
Alessandro Ranellucci
07a4c37c4c
Semi-working Boost.Polygon medial axis. Hangs after perimeters, though. Needs pruning and chaining
2014-01-10 11:47:16 +01:00
Alessandro Ranellucci
bf91f3096a
Incomplete work for using Boost.Polygon to compute medial axis
2014-01-09 17:26:39 +01:00
Alessandro Ranellucci
c8a48b4527
Implement modifier volumes and port _merge_loops() to XS
2014-01-07 15:40:38 +01:00
Alessandro Ranellucci
8ed738d3f7
More incomplete work for Flow/Extruder refactoring
2014-01-03 18:27:46 +01:00
Alessandro Ranellucci
e2f1040a76
More work
2014-01-02 10:44:54 +01:00
Alessandro Ranellucci
83326845dd
More incomplete work
2013-12-31 14:33:03 +01:00
Alessandro Ranellucci
beb1baa096
Incomplete work for refactoring regions and flows
2013-12-30 18:28:41 +01:00
Alessandro Ranellucci
13d7b39072
Fix random crashes on 32-bit. Thank you Valgrind
2013-12-28 15:37:04 +01:00
Alessandro Ranellucci
1a690589a8
Satisfy test suite
2013-12-24 12:03:30 +01:00
Alessandro Ranellucci
1157a7f859
Remove package variable $Slic3r::Config
2013-12-24 11:29:31 +01:00
Alessandro Ranellucci
87c5427010
Fixed regression causing incomplete gap fill when all configured perimeters were successfully generated. #1589
2013-12-23 21:23:26 +01:00
Alessandro Ranellucci
cacbaa7319
Fix regression causing thin walls to come out as zigzag paths. #1573 #1575
2013-12-23 20:37:46 +01:00
Alessandro Ranellucci
57fd6ad563
Removed dependency on ->object from Region.pm
2013-11-26 18:46:48 +01:00
Alessandro Ranellucci
a93c862338
Ported traverse_pt() to XS
2013-11-23 23:21:59 +01:00
