3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
11,053 Commits 1 Branch 1 Tag 249 MiB
1baa333663
Commit Graph

435 Commits

Author SHA1 Message Date
bubnikv
38cb2842ac support_material_synchronize_layers implementation 2016-11-30 16:06:12 +01:00
bubnikv
79f5a16536 Reverted the perimeter generator to not save the perimeter areas. 
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.

Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
 2016-11-17 23:22:59 +01:00
bubnikv
22ca927f12 Reworked the bridge detector to allow searching a single bridging 
direction over multiple regions. This allows a single bridge to be
drawn over holes, which are too close to each other to allow
for separate bridges.
Fixes Bridging-Angle not optimal
https://github.com/prusa3d/Slic3r/issues/12

Re-allowed adaptive infill line width for solid infills. The adaptive
infill line width works in some circumstances, see Issue #15,
but the original implementation often changed the line width too
aggressively. The current implementation limits the line width change
to 20%.
Fixes Gaps between infill and perimeter leads to errors in laydown on following layer
https://github.com/prusa3d/Slic3r/issues/15
 2016-11-08 09:59:25 +01:00
bubnikv
d530bdba67 Test of a 100% coverage by the FillRectilinear2 has been disabled before, 
now also the expected number of tests executed has been adjusted accordingly.
 2016-11-02 17:15:05 +01:00
bubnikv
28ccb51f9b Fixed a crash when accessing a non-existing config value from C++ infill. 
Disabled a test case of 100% infill coverage. This needs to be
yet improved.
 2016-11-02 16:55:56 +01:00
bubnikv
95ede7c4b8 Rewrote Fill2.pm to C++, deleted Perl infills for good. 
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
 2016-11-02 10:47:00 +01:00
bubnikv
1fb57e439e Defined the +-* operators on Pointf. 
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
 2016-10-21 16:53:42 +02:00
bubnikv
b5e24d3527 Fix of a test case of PerimeterGenerator. 2016-09-28 11:17:59 +02:00
bubnikv
8564ac391c Test case for Bugfix: use Lift-z option for 2. extruder #3385 
thanks to
https://github.com/platsch
 2016-09-26 12:50:05 +02:00
Alessandro Ranellucci
9e8022f6f6 More refactoring to medial axis and gap fill, more robust 2016-05-20 17:03:57 +02:00
Chow Loong Jin
a94402a8a2 Update tests for new GCode style and markers 2016-04-10 16:40:18 +08:00
Alessandro Ranellucci
7041bb5bd9 Rewritten the medial axis algorithm, now more robust (don't just prune MAT from endpoints, but validate all single edges) 2016-03-26 01:45:08 +01:00
Alessandro Ranellucci
5ff7511a14 Fixed regression in bridging caused by error in porting. Includes regression test. #3175 2016-03-18 22:40:29 +01:00
Alessandro Ranellucci
790dbfe9a8 Fix false positive in lift unit test 2015-12-19 15:00:56 +01:00
Alessandro Ranellucci
a2ea191d84 Fix regression in lift, includes regression test 2015-12-19 12:44:22 +01:00
Alessandro Ranellucci
8138fbf349 New --retract-lift-above and --retract-lift-below options. #763 #3057 2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
48f1fab49f Bugfix: an error in porting caused bad perimeter ordering. Includes regression test and more unit tests for PerimeterGenerator 2015-12-01 20:40:00 +01:00
Alessandro Ranellucci
6ac79e3ed6 Ported make_perimeters() to C++ 2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
b4515cf695 Finished porting PerimeterGenerator to C++ 2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
b14290b9f6 Make tests happy 2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
b4019bb438 Ported more Slic3r::GCode methods to XS 2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
801f629fdc Ported Slic3r::GCode storage to XS 2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
76b2e88551 Removed setenv() test as we can't test environment variables in Perl since they are now set in XS 2015-07-01 20:15:52 +02:00
Alessandro Ranellucci
580d28d071 Finished porting PlaceholderParser to XS 2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
f14c0e2183 Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857 2015-06-01 17:55:51 +02:00
Alessandro Ranellucci
a587e11780 Regression test for overlapping gap fill. #2474 2015-05-22 14:26:01 +02:00
Alessandro Ranellucci
97211f35e7 More robust medial axis pruning. #2800 2015-05-13 20:50:30 +02:00
Alessandro Ranellucci
63af442e3e Bugfix: [layer_num] was out of order because of support material layers having their order numbers. Now we use a unique continuous series. Includes regression test. #2634 2015-05-03 21:41:30 +02:00
Alessandro Ranellucci
1f8ef2a63c Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761 2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
13b63d06ed Use thick raft layers as we do for support material layers. #2723 2015-03-09 20:00:55 +01:00
Alessandro Ranellucci
d8ee9dd5f5 Limit first object layer height correctly when using a larger support material extruder. #2722 2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
095391d702 When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701 2015-03-06 21:35:00 +01:00
Alessandro Ranellucci
722e94513c Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled 2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
a3b843b24e Bugfix: temperature was not set correctly when using sequential printing. Includes regression test. #2702 2015-03-02 23:56:38 +01:00
Alessandro Ranellucci
a07c48bb30 Fixed regression causing [input_filename] and [input_filename_base] not being available in custom G-code anymore. Includes regression test. #1507 2015-02-15 23:47:35 +01:00
Alessandro Ranellucci
6eb1fa36ed Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656 2015-02-14 12:47:33 +01:00
Alessandro Ranellucci
2e88b088e6 Make tests happy with new defaults 2015-01-31 12:10:50 +01:00
Alessandro Ranellucci
229039d3b8 Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103 2015-01-19 15:31:12 +01:00
Alessandro Ranellucci
7b980c1dc9 New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703 2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
90afbc8bd9 Bugfix: don't crash when skirts > 0 but skirt_height = 0. Includes regression test. #2537 2015-01-18 13:01:00 +01:00
Alessandro Ranellucci
89f0c60fc8 Adapt t/multi.t to new behavior of auto_assign_extruders() 2015-01-17 10:36:42 +01:00
Alessandro Ranellucci
d1243397fa Make tests happy 2015-01-14 00:14:56 +01:00
Alessandro Ranellucci
406d045ced The inwards move after an external loop was still randomly generated outwards in some cases. Perimeters are now generated with a distinct iterator for each slice. Nested islands are also correctly supported too. Various regression tests included. #2253 2015-01-08 15:22:13 +01:00
Alessandro Ranellucci
49817aac34 Removed test that doesn't apply anymore because the logic of only_retract_when_crossing_perimeters is much more complex now 2015-01-06 21:04:00 +01:00
Alessandro Ranellucci
0f7933c4f9 Bugfix: pressure regulation accumulated too much retraction and didn't discharge at the end of print. Includes regression test. #2470 2015-01-06 00:35:39 +01:00
Alessandro Ranellucci
3332282767 Unit test for pressure advance. #2470 2015-01-05 20:07:47 +01:00
Alessandro Ranellucci
d46d9079a3 Fixed test after recent change of distance_to_line() semantics 2015-01-03 15:41:54 +01:00
Alessandro Ranellucci
de2fd9721c Fixed ooze prevention test as well 2014-12-29 01:37:34 +01:00
Alessandro Ranellucci
33f7b08c80 Fix t/support.t after changing contact distance on top surfaces 2014-12-24 12:11:30 +01:00
Alessandro Ranellucci
19548fe301 Don't perform wiping if we have just changed layer and no extrusions were performed before the first retraction. Includes regression test. #2214 2014-12-24 12:02:42 +01:00
Alessandro Ranellucci
092b1724ba Fixed t/vibrationlimit.t 2014-12-23 11:23:12 +01:00
Alessandro Ranellucci
0ded18207b Adapt t/fill.t to the new infill internal API 2014-12-22 17:29:23 +01:00
Alessandro Ranellucci
9ac60dca1a Fixed vibration limit. 2014-12-21 12:39:19 +01:00
Alessandro Ranellucci
21ea100d0e Fixed tests 2014-12-17 01:15:47 +01:00
Alessandro Ranellucci
9264db7ecd Removed useless thing added in e79aa2e81c 2014-12-17 00:52:01 +01:00
Alessandro Ranellucci
e79aa2e81c New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618 2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
d350241da3 Make combine_infill() completely idempotent. Includes unit testing 2014-12-08 21:23:42 +01:00
Alessandro Ranellucci
9a9ba02d85 Bugfix: infill was not correctly generated when infill_every_layers was used along with raft_layers. Includes regression test. #2396 2014-12-08 20:14:04 +01:00
Alessandro Ranellucci
6ce651eb4a Fixed wrong implementation of concave_points() and convex_points() in C++. #2384 2014-12-07 19:53:22 +01:00
Alessandro Ranellucci
7a7d00c8d6 Rename solid_fill_pattern to external_fill_pattern and clarify tooltip 2014-11-27 00:38:05 +01:00
Alessandro Ranellucci
23848492ce Fixed regression causing crash when using avoid_crossing_perimeters with multiple object, caused by recent refactorings. Added regression test 2014-11-26 22:46:51 +01:00
Alessandro Ranellucci
60a76b8cfa Fixed regression causing retraction to be skipped when Retract Length was 0 but Use Firmware Retraction was enabled. Includes regression test. #2359 2014-11-23 19:32:06 +01:00
Alessandro Ranellucci
379cde30e2 Ported Slic3r::BridgeDetector to XS 2014-11-15 22:41:22 +01:00
Alessandro Ranellucci
6135a9fb8b Bugfix: a move below z_offset was performed when retract_lift was enabled and lift amount was less than z_offset. Includes regression test. #2349 2014-11-09 19:24:17 +01:00
Alessandro Ranellucci
59f0c64e1c Fixed regression test for #2301 2014-11-07 17:27:16 +01:00
Alessandro Ranellucci
66b5f45f45 Merge branch 'issue2301-bridge-speed' 2014-11-07 17:18:17 +01:00
Alessandro Ranellucci
fb2d84b5d3 Bugfix: double G10 and G11 commands were issued. #2320 2014-11-07 00:26:39 +01:00
Alessandro Ranellucci
8ad200a352 Minor cleanup of t/gcode.t 2014-11-06 21:13:30 +01:00
Alessandro Ranellucci
9372abb51e Fixed regression in min_skirt_length. Includes regression test. #2337 2014-11-06 21:11:59 +01:00
Alessandro Ranellucci
30b0869595 Bugfix: crash when slicing one layer objects with sailfish G-code flavor. Includes regression test. #2335 2014-11-06 21:06:09 +01:00
Alessandro Ranellucci
11bd1e68e2 Fixed some regressions in retracts and wipe. Includes regression test 2014-11-05 01:16:26 +01:00
Alessandro Ranellucci
36c1a9d20c Renamed shift_x and shift_y into origin 2014-10-25 10:56:21 +02:00
Alessandro Ranellucci
7f57f007cd Refactoring: moved Slic3r::GCode::Base to Slic3r::GCode::Writer 2014-10-25 10:42:07 +02:00
Alessandro Ranellucci
c2e710d092 Removed --g0 2014-10-21 21:41:11 +02:00
Alessandro Ranellucci
167df0ab87 Refactoring: moved most of the low-level G-code to the Slic3r::GCode::Base class. Cleanup of the retraction and wipe logic. 2014-10-21 20:16:45 +02:00
Alessandro Ranellucci
4b013d7a48 Added failing test for bridge speed not being used for first object layer above support material. #2301 2014-10-18 14:08:40 +02:00
Alessandro Ranellucci
534b8c3f12 Fixed minor harmless error in a couple tests 2014-08-08 11:07:51 +02:00
Alessandro Ranellucci
c0a6b1a9cc Bugfix: enabling/disabling support material didn't cause skirt to be recalculated 2014-08-08 01:37:39 +02:00
Alessandro Ranellucci
30fa055995 Bugfix: medial axis missed some segments. #2144 2014-08-03 15:03:47 +02:00
Alessandro Ranellucci
c4d70bcb85 Always use a rectangle with semicircles as extrudate shape 2014-07-26 15:29:24 +02:00
Alessandro Ranellucci
a654722f18 Fixed test relying on old layer_height default value 2014-07-26 14:15:53 +02:00
Alessandro Ranellucci
71209711b3 Bugfix: ignore only_retract_when_crossing_perimeters when fill_density = 0 2014-07-23 00:57:31 +02:00
Alessandro Ranellucci
5ec12080e0 Added unit tests about temperatures being preserved in spiral_vase mode 2014-07-03 14:36:15 +02:00
Alessandro Ranellucci
928335f186 Removed print_center option (but left --print-center from CLI) 2014-06-16 23:58:45 +02:00
Alessandro Ranellucci
e24b3a8916 Merge branch 'call_get_layer' of github.com:sapir/Slic3r into sapir-call_get_layer 
Conflicts:
	lib/Slic3r/Print.pm
 2014-06-14 00:05:24 +02:00
Y. Sapir
09357e5868 A few improvements to gcode placeholder tests. 2014-06-13 14:02:09 +03:00
Alessandro Ranellucci
9bff6ccde7 Fixed tests after recent fixes to concave_points 2014-06-11 22:21:30 +02:00
Alessandro Ranellucci
5dcc1eab79 Bugfix: seam_position = aligned failed in certaim circumstances because of faulty concave points detection. Includes regression test 2014-06-11 21:58:41 +02:00
Alessandro Ranellucci
82e2dd4e62 Bugfix: wrong number of raft layers in some situations due to a numerical error 2014-06-11 21:58:28 +02:00
Alessandro Ranellucci
3599bd0bae Distinct extrusion width for external perimeters 2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
64853d5661 Bugfix: M73 was exceeding 100% when multiple objects were printed together. #1912 2014-06-05 16:24:47 +02:00
Alessandro Ranellucci
28695c719c Fixed regression causing bridge flow to be incorrect when a manual default extrusion width was specified. Includes several regression tests. #2027 2014-06-03 23:59:03 +02:00
Alessandro Ranellucci
ce1e736b6b Bugfix: crash when skirt was contained in brim area. Includes regression test. #2058 2014-05-27 13:38:41 +02:00
Alessandro Ranellucci
3d25b9030c Bugfix: movement between objects in sequential printing mode was going too far away. #2013 #2007 2014-05-26 15:19:13 +02:00
Alessandro Ranellucci
abdf6531f1 Bugfix: wrong logic for concave_points() and convex_points() 2014-05-26 11:50:42 +02:00
Alessandro Ranellucci
7ea09a0071 Bugfix: failure when exporting SVG from object containing multiple islands. Includes regression test. #2050 2014-05-26 11:13:53 +02:00
Alessandro Ranellucci
4e5f7d74ff Bugfix: wrong handling of large number of raft layers. #2041 2014-05-25 23:17:00 +02:00
Alessandro Ranellucci
88a2e5c791 Typo seal -> seam :-) 2014-05-24 22:10:28 +02:00
Alessandro Ranellucci
a3bd1b5302 New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925 2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
5e6ff952df Fix more regressions in test suite regarding the workaround for Clipper bug 2014-05-21 15:45:16 +02:00