That allows computed better values in cases when the extrusion width of the first layer or for the infill differs from the extrusion width for perimeters.
Parameters min_feature_size and wall_transition_length now can be set in percentages, and then they will be calculated based on nozzle size. Old profiles with default values are forced to replace old default values with new default values in percentages.
CONFLICT (content): Merge conflict in resources/profiles/PrusaResearch.idx
CONFLICT (content): Merge conflict in resources/profiles/PrusaResearch.ini
CONFLICT (content): Merge conflict in src/libslic3r/CMakeLists.txt
CONFLICT (content): Merge conflict in src/libslic3r/Fill/Fill.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode.hpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/GCodeProcessor.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/GCodeProcessor.hpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/SeamPlacer.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/SeamPlacer.hpp
CONFLICT (add/add): Merge conflict in src/libslic3r/Geometry/Curves.hpp
CONFLICT (content): Merge conflict in src/libslic3r/PerimeterGenerator.cpp
CONFLICT (content): Merge conflict in src/libslic3r/Point.hpp
CONFLICT (content): Merge conflict in src/libslic3r/PrintConfig.hpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/ConfigWizard.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/GCodeViewer.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/GLCanvas3D.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/GUI_App.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp
CONFLICT (content): Merge conflict in src/slic3r/Utils/FixModelByWin10.cpp
CONFLICT (modify/delete): t/perimeters.t deleted in HEAD and modified in master_250. Version master_250 of t/perimeters.t left in tree.
CONFLICT (content): Merge conflict in tests/fff_print/CMakeLists.txt
CONFLICT (content): Merge conflict in tests/fff_print/test_fill.cpp
CONFLICT (content): Merge conflict in version.inc
CONFLICT (modify/delete): xs/xsp/PerimeterGenerator.xsp deleted in HEAD and modified in master_250. Version master_250 of xs/xsp/PerimeterGenerator.xsp left in tree.
object layer over raft interface:
"first_layer_speed_over_raft", "first_layer_acceleration_over_raft".
Fixes I have a question about the speed of the first layer after the raft. #6623
Fixes Layer After Raft Is Not Considered First Layer! #6166
1) Changed the name of the variable "brim_offset" to "brim_separation"
for clarity.
2) Added legacy conversion after loading an old 3MF that does not define
then new "brim_separation" variable: The "brim_separation" is being
filled in with the "elefant_foot_compensation" value to produce
equal brim separation to the old PrusaSlicer that saved that 3MF file.
reset timestamp to 1. This led to a bug where e.g. deleting painted facets
through the respective item in object list followed by possible other actions
and undo restored the painted facets from the time when the project was loaded.
I'm not sure if there was any other situation where this problem manifested.
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
As a preparation for PrusaSlicer 2.4.0, the new firmware_flavor
"marlinfirmware" (signifying Marlin 2.0 and newer) that is not
supported by 2.3.2 yet will default to "marlin" (signifying legacy
Marlin).
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
S3D's strategy for merging self intersecting models is "Even / Odd"
which PrusaSlicer now supports as an alternative to "Positive" rule.
Also added a "Close Holes" option to fill in all internal structures.
3D-Labprint Models aren't sliceable (till years) #3062#3708
