3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,358 Commits 1 Branch 1 Tag 249 MiB
231bffa99b
Commit Graph

118 Commits

Author SHA1 Message Date
Alessandro Ranellucci
e7558ce16c Bugfix: wrong flow amount for solid layers. #317 2012-04-17 09:29:41 +02:00
Alessandro Ranellucci
285caffa9c Omit G92 if No Extrusion 2012-04-16 20:06:53 +02:00
Alessandro Ranellucci
8d851c24a9 Increase the flow rate for support material 2012-04-16 14:18:07 +02:00
Alessandro Ranellucci
96d5e513b8 Rename $Slic3r::resolution to $Slic3r::scaling_factor 2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a Remove XXX from dependencies 2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
e3a9adae4d Bugfix: use P instead of S for Mach3 for M106 too. #286 2012-03-27 10:26:10 +02:00
Alessandro Ranellucci
4d71ca3071 Enable G0 automatically for Mach3. #266 2012-03-26 12:22:12 +02:00
Alessandro Ranellucci
1a06e35687 New option to specify G-code to be used at layer change. #279 2012-03-26 12:14:15 +02:00
Alessandro Ranellucci
3cf5f86ce0 Avoid G92 for Mach3. #220 2012-03-04 11:49:04 +01:00
Alessandro Ranellucci
c7006fed26 Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245 2012-03-03 22:16:38 +01:00
Alessandro Ranellucci
170d29a789 New --cooling option and checkbox to enable/disable fan and cooling control 2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
1d0a852679 Cooling and fan control. #110 2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
c3fc6ee66b Fix regression introduced with f2e1fe5241 2012-02-21 20:16:03 +01:00
Alessandro Ranellucci
94a2585b97 Dual extruder for support material 2012-02-19 17:02:49 +01:00
Alessandro Ranellucci
7b67fae686 Support material 2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
e0e2023a5a Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179 2012-02-19 10:48:58 +01:00
Alessandro Ranellucci
74c71b4ef2 Acceleration control. #185 2012-02-10 14:53:44 +01:00
Alessandro Ranellucci
3e65af7457 Revert "New First layer flow ratio option. #182" 
This reverts commit 99ef0865bb.
 2012-01-30 14:51:05 +01:00
Alessandro Ranellucci
99ef0865bb New First layer flow ratio option. #182 2012-01-30 14:25:14 +01:00
Alessandro Ranellucci
eb33c03926 Bugfix: flow wasn't adjusted for first layer according to its height setting. #182 2012-01-30 14:03:12 +01:00
Alessandro Ranellucci
f1b1454b36 Loops were not closing well 2012-01-21 11:51:31 +01:00
Alessandro Ranellucci
1c7564e4a4 Thin walls. #24 2011-12-30 17:17:37 +01:00
Alessandro Ranellucci
caf41f07dd Output required filament length and volume to command line and to the gcode file itself 2011-12-20 15:29:15 +01:00
Alessandro Ranellucci
d63eabcfa5 Clip less from loops to avoid gaps 2011-12-17 19:54:35 +01:00
Alessandro Ranellucci
1e6ecd9eab Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap. 2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
8e04d763f4 Don't increase flow for overlapping purposes when bridging 2011-12-16 10:53:22 +01:00
Alessandro Ranellucci
d346bc02cc Comments are now disabled by default, new --gcode-comments option to enable them 2011-12-14 19:49:21 +01:00
Alessandro Ranellucci
56691c1dea Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112 2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
0a74e068a3 Merge branch 'infill-overlap' 2011-12-08 10:53:24 +01:00
Alessandro Ranellucci
d9a70ea80d Customizable overlap ratio (it defaults to 0.15 now) 2011-12-08 10:53:07 +01:00
Alessandro Ranellucci
d813aea59a Don't slow down retractions on bottom layer. #101 2011-12-08 10:28:23 +01:00
Alessandro Ranellucci
53bc9c7421 Customizable speed for small perimeters. #60 2011-12-04 20:50:03 +01:00
Alessandro Ranellucci
0aff5fab24 Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89 2011-12-04 16:24:46 +01:00
Alessandro Ranellucci
52c9897eda New --extrusion-axis option; removed --no-extrusion 2011-12-01 22:34:21 +01:00
Alessandro Ranellucci
e99c9f9e5f Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77 2011-12-01 22:04:23 +01:00
Alessandro Ranellucci
92e86a2259 Bugfix: plate was lifted even when retracting for Z change 2011-11-28 19:59:39 +01:00
Alessandro Ranellucci
3ad9ed74ae New --solid-infill-feed-rate option. #68 2011-11-28 19:11:26 +01:00
Alessandro Ranellucci
4cdd0f6fd0 Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero. 2011-11-27 10:12:44 +01:00
Alessandro Ranellucci
8e7d00bb34 Avoid unnecessary retractions during infill. #29 2011-11-26 17:01:00 +01:00
Alessandro Ranellucci
25c85aada5 Renamed "filament packing density" to "extrusion multiplier". Same values. #4 2011-11-25 11:15:20 +01:00
Alessandro Ranellucci
3c0ea0b57f New --extrusion-width-ratio option. #8 2011-11-25 11:10:35 +01:00
Alessandro Ranellucci
47d347e1b2 Revert "Disable retraction when moving over infill space. #29" 
This reverts commit d6ed9c6f34.
 2011-11-24 12:53:09 +01:00
Alessandro Ranellucci
d6ed9c6f34 Disable retraction when moving over infill space. #29 2011-11-21 12:37:12 +01:00
Alessandro Ranellucci
2abd8fe240 Bugfix: bottom layer speed settings were ignored. 2011-11-15 12:02:31 +01:00
Alessandro Ranellucci
c2a2d9ae6d Combine Z changes and retractions using G0. #51 2011-11-14 12:45:20 +01:00
Alessandro Ranellucci
db35faeabb New experimental --g0 option for fast retractions. #51 2011-11-14 12:15:32 +01:00
Alessandro Ranellucci
b123194522 New --no-extrusion option to disable E values 2011-11-13 18:26:31 +01:00
Alessandro Ranellucci
c5d5e4d244 Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28 2011-11-12 10:18:20 +01:00
Alessandro Ranellucci
b4e268efad New --retract-lift option to lift Z while doing travel moves. #25 2011-11-07 15:58:47 +01:00
Alessandro Ranellucci
d620b46beb Bugfix: arcs now work (some glitches in detecting their center, though). #30 2011-11-07 14:12:07 +01:00
Alessandro Ranellucci
8172bcb772 Bugfix: G2/G3 I and J coordinates were wrong. #30 2011-11-06 20:24:42 +01:00
Alessandro Ranellucci
6d6533831e New experimental --gcode-arcs options to generate G2/G3 commands. #23 2011-10-28 14:13:44 +02:00
Alessandro Ranellucci
7f341cfcd3 New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill 2011-10-18 15:57:53 +02:00
Alessandro Ranellucci
f7335b6d1e Bugfix: latest retraction changes broke retraction 2011-10-14 12:14:20 +02:00
Alessandro Ranellucci
e410410dc7 Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster. 2011-10-12 14:54:49 +02:00
Alessandro Ranellucci
82d8d0896f Reset extrusion distance during retracts 2011-10-11 17:53:50 +02:00
Alessandro Ranellucci
ef485e511e Remove useless F params to shrink gcode size (#14) and Reset E before exceeding 65535 (#13) 2011-10-11 16:04:50 +02:00
Alessandro Ranellucci
a7d5e643ae Bugfix: couldn't set fill density to zero 2011-10-10 14:37:40 +02:00
Alessandro Ranellucci
1cb515a8e5 Merge branch 'high-res-perimeters' 
Conflicts:
	lib/Slic3r/Extruder.pm
 2011-10-06 20:09:50 +02:00
Alessandro Ranellucci
5daaf454b1 Faster algorithm for rectilinear fill 2011-10-06 17:13:42 +02:00
Alessandro Ranellucci
119eb0693f New high_res_perimeters option (like the "Skin" plugin for Skeinforge) 2011-10-06 17:11:59 +02:00
Alessandro Ranellucci
1978a99416 Faster algorithm for rectilinear fill 2011-10-06 16:22:22 +02:00
Alessandro Ranellucci
5a07137def Fixes to retraction and skirt 2011-10-05 21:25:17 +02:00
Alessandro Ranellucci
794b7a99d2 Fixes for hi-res STL models 2011-10-04 17:55:55 +02:00
Alessandro Ranellucci
21d287504c New --perimeter-feed-rate and --retract-before-travel options. Includes some refactoring and fixes. 2011-10-02 09:57:37 +02:00
Alessandro Ranellucci
55f2247cd9 New extrusion math 2011-10-01 18:10:33 +02:00
Alessandro Ranellucci
b61b543243 Minor cleanups 2011-09-26 19:53:01 +02:00
Alessandro Ranellucci
081f65852d Refactor extrusion logic in a dedicated class 2011-09-26 11:42:08 +02:00