Alessandro Ranellucci
1187f4846d
Some Clipper optimizations
2013-03-31 19:40:25 +02:00
Alessandro Ranellucci
7f23e72a10
Display preview for small files too. #929
2013-03-30 00:52:45 +01:00
Alessandro Ranellucci
33a4ec660d
better handling of too-small and too-short models #929 .
...
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
2013-03-30 00:47:13 +01:00
Alessandro Ranellucci
2f046799f2
Removed offset() method from Slic3r::Polygon because it only works with ccw polygons
2013-03-26 14:03:24 +01:00
Alessandro Ranellucci
813aa5b307
Allow drag and drop for OBJ files
2013-03-19 12:25:10 +01:00
Alessandro Ranellucci
33b40eda18
Always fix self-intersecting polygons that Douglas-Peucker might return
2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
f670acb4b1
Slice a single object with multiple layer heights. :-)
2013-03-10 14:58:49 +01:00
Alessandro Ranellucci
6a0ba97f0e
Move ObjectDialog to a separate file
2013-03-10 12:33:10 +01:00
Alessandro Ranellucci
b901e1f6c8
Merge branch 'master' into simple-mode
2013-03-08 22:28:13 +01:00
Alessandro Ranellucci
7412d4a687
Bugfix: manifoldness error triggered with multi-volume AMF files. #1019
2013-02-24 18:17:08 +01:00
Alessandro Ranellucci
f555a1ecc2
Replace 'Less' with 'Fewer' in plater. #944
2013-01-23 19:16:57 +01:00
Alessandro Ranellucci
7239ca18c1
Simple mode
2013-01-03 15:49:20 +01:00
Alessandro Ranellucci
b495e15d7f
Fix plater slowness after the introduction of the vertical projection
2012-11-29 19:13:52 +01:00
Alessandro Ranellucci
116ab446e3
Show vertical projection instead of convex hull for objects with <= 2000 facets. #780
2012-11-24 00:13:04 +01:00
Alessandro Ranellucci
e91320e031
Fix rotation for threaded perls
2012-11-19 18:31:41 +01:00
Alessandro Ranellucci
5678cd562c
Fix preview after rotation in plater
2012-11-19 17:39:16 +01:00
Alessandro Ranellucci
8d557bee8c
Bugfix: AMF export was not working anymore. #799
2012-11-16 22:41:54 +01:00
Alessandro Ranellucci
d0bee4bf41
Fixed regression in Split. #766
2012-10-27 21:39:57 +02:00
Alessandro Ranellucci
bc9ff848dd
Removed unused 'propgrid' import group from Wx. #764
2012-10-27 21:21:18 +02:00
Alessandro Ranellucci
392af5542b
Show object information when double-clicking it in the plater
2012-10-24 22:44:08 +02:00
Alessandro Ranellucci
3c8ac435ad
Remember last used filament presets when using multiple extruders too
2012-10-24 20:24:11 +02:00
Alessandro Ranellucci
c793a2657f
Replace Math::ConvexHull with Math::ConvexHull::MonotoneChain. #722
2012-10-22 15:29:54 +02:00
Alessandro Ranellucci
33b1970b95
Incomplete commit broke the plater on threaded perls
2012-10-22 14:02:58 +02:00
Alessandro Ranellucci
4f1b56f004
Fix regression causing the plater to merge all materials into a single one, thus not producing multi-extrusion prints
2012-10-21 20:56:19 +02:00
Alessandro Ranellucci
f5f9574173
Merge pull request #722 from mesheldrake/remove-dups-before-hull
...
use remove_coinciding_points before convex_hull
2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
6b4f038d17
Update copies number when decreasing parts. #747
2012-10-15 10:59:54 +02:00
Alessandro Ranellucci
1a6eaeaa91
Bugfix: split wasn't working properly under threaded perls
2012-10-01 18:12:14 +02:00
Alessandro Ranellucci
2c400ee2b8
Removed useless warning
2012-10-01 16:49:02 +02:00
Mike Sheldrake
4b91496edd
use remove_coinciding_points before convex_hull
...
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
2012-09-27 06:47:38 -07:00
Alessandro Ranellucci
fd74577eae
Fix typo in previous commit
2012-09-24 21:00:26 +02:00
Alessandro Ranellucci
1f4706f02f
[print_preset] and others were erroneously renamed to [print] etc. #675
2012-09-23 17:40:34 +02:00
Alessandro Ranellucci
77625894ff
New command to combine multiple STL files into a single multi-material AMF file
2012-09-23 14:48:58 +02:00
Alessandro Ranellucci
e696764af8
Assign extruders and flows to materials
2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
35e449e891
Make new plater compatible with threaded perls
2012-09-21 17:45:54 +02:00
Alessandro Ranellucci
f638558167
Preserve position when splitting objects in plater
2012-09-21 15:35:32 +02:00
Alessandro Ranellucci
e40f32995f
Finish GUI decoupling
2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
757515ba17
New [print_preset], [filament_preset] and [printer_preset] variables. #675
2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
e89f64e9d3
More unfinished work
2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
191de5d078
Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage)
2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
23f6842bd4
Export plates as AMF constellations
2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
f90520ed06
Refactoring: new Slic3r::Model class to represent files
2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
a1ac866b84
Refactoring: turn x_length and y_length in size
2012-08-25 20:14:01 +02:00
Nicolas Dandrimont
a147530d2a
Explicitly avoid passing arguments to remove when called from the event handler
...
Wx passes some objects to the callbacks, and we want to ignore those.
2012-08-11 16:05:17 +02:00
Nicolas Dandrimont
7b0d4cb4e1
Revert "Dereference the Wx object id when removing an object in the plater."
...
This reverts commit 4979029cd2
2012-08-11 16:00:41 +02:00
Nicolas Dandrimont
4979029cd2
Dereference the Wx object id when removing an object in the plater.
2012-08-11 15:49:06 +02:00
Alessandro Ranellucci
624e16b7e2
Unexpected results splitting objects with threaded perls. #610
2012-08-10 16:05:16 +02:00
Alessandro Ranellucci
2bf219a637
Bugfix: random failure to load presets. #600
2012-08-09 00:41:03 +02:00
Henrik Brix Andersen
e2b2e369f8
Disable using ENTER key for accessing "Export G-code..." button.
2012-08-08 21:45:17 +02:00
Henrik Brix Andersen
640c07a233
Revert 4099c3a8cf
...
Presenting detailed statistics about a given slice needs rethinking, as this solution will not scale.
2012-08-07 21:00:03 +02:00
Alessandro Ranellucci
2548d5b993
Expose all multi-extruder settings to the GUI
2012-08-07 20:14:28 +02:00
