3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,251 Commits 1 Branch 1 Tag 249 MiB
2562070232
Commit Graph

2637 Commits

Author SHA1 Message Date
Alessandro Ranellucci
f6e99f1467 Bugfix: [filament_preset] was not replaced in filename when using Quick Slice. #1870 2014-04-19 12:10:15 +02:00
Alessandro Ranellucci
1e5dcd8154 Always do one island at time instead of doing that only when avoid_crossing_perimeters is enabled. #1907 2014-04-19 11:57:01 +02:00
Alessandro Ranellucci
f51921a11a Default extruder wasn't applied to perimeter extruder. Includes regression test. #1868 2014-04-19 11:43:41 +02:00
Alessandro Ranellucci
0c50ab5323 Removed duplicated method added to Slic3r::Line in caf20664cd. #1945 2014-04-19 10:52:12 +02:00
Alessandro Ranellucci
caf20664cd Bugfix: ExPolygon::contains_line() was called with a Polyline object but didn't throw any error. Thanks ledvinap #1945 2014-04-19 01:26:21 +02:00
Alessandro Ranellucci
62e19469bc Fixed regression in --infill-only-where-needed. Includes a minimal test suite for such feature. #1871 
Conflicts:

	t/fill.t
 2014-04-18 21:48:32 +02:00
Alessandro Ranellucci
15628a90ed Regression test for numerical issues causing thin gaps between perimeters and infill. #1803 2014-04-18 17:30:35 +02:00
Alessandro Ranellucci
93f4fe05e1 Better logic for gap fill: don't subtract from fill surfaces those gaps that medial axis was unable to fill. Thanks ledvinap for the idea and proof of concept implementation. Includes a tolerance factor for avoiding being too strict when collapsing loops (allow some overlap if that helps avoiding triggering medial axis). #1803 2014-04-15 01:41:40 +02:00
Alessandro Ranellucci
e02d33bbce Remove weak test. #1803 2014-04-15 00:57:43 +02:00
Alessandro Ranellucci
43ffb7d3e8 Bugfix: sometimes a tiny gap was left between infill and perimeters. Includes regression test. #1803 2014-04-15 00:22:31 +02:00
Alessandro Ranellucci
f9661b02a6 Bugfix in utils/pdf-slices.pl, wrong shift caused slices to be outside the media box 2014-04-11 19:55:15 +02:00
Alessandro Ranellucci
8e5ca0ab76 Fixed a couple typos 2014-04-09 00:36:13 +02:00
Alessandro Ranellucci
627f23d5fe Make angle increment (i.e. angle resolution) configurable 2014-04-08 16:53:32 +02:00
Alessandro Ranellucci
38f6e3b643 More unit tests for bridge angle detection 2014-04-08 15:18:37 +02:00
Alessandro Ranellucci
9be57f750d Some fixes to bridge direction detection. Includes regression tests 2014-04-08 14:51:55 +02:00
Alessandro Ranellucci
23e6abff49 Added first unit test for bridge direction 2014-04-08 13:08:42 +02:00
Alessandro Ranellucci
119778caa9 Refactoring: move bridge angle detection to a separate class for easier unit testing 2014-04-07 23:18:11 +02:00
Alessandro Ranellucci
93a7d87fc6 Bugfix: pillars support material crashed when no overhangs were detected 2014-04-07 16:59:22 +02:00
Alessandro Ranellucci
1c020eda78 Merge pull request #1911 from sapir/speed 
Rewriting the extrusion path gcode generation in C++
 2014-04-07 09:38:21 +02:00
Alessandro Ranellucci
33ade1328f Fix regression causing profile names to be listed in random order. #1864 2014-04-06 22:45:40 +02:00
Alessandro Ranellucci
e4709068b9 Some more unit tests for arc fitting 2014-04-06 22:32:53 +02:00
Alessandro Ranellucci
1d35701f99 Incomplete work on arc fitting. Results are still incomplete. More unit tests are needed 2014-04-06 22:10:34 +02:00
Alessandro Ranellucci
c7a96a3113 Merge pull request #1881 from sapir/master 
Disable some calls to on_presets_changed to speed up switching profiles
 2014-04-06 12:52:05 +02:00
Alessandro Ranellucci
20df1023a6 Fixed broken command line scaling. Regression test was in previous commit. #1889 2014-04-05 11:22:05 +02:00
Alessandro Ranellucci
e9e23119fc Failing test for broken command line scaling. #1889 2014-04-05 11:21:26 +02:00
Alessandro Ranellucci
fc4ac5ded4 Re-enable the threads config option. #1882 2014-04-05 10:58:03 +02:00
Alessandro Ranellucci
d6d6a51e0d Fix for incomplete extrusion on solid surfaces 2014-04-05 10:54:24 +02:00
Alessandro Ranellucci
6f3844c1ba Fix crash when using multiple skirts with a single, non-zero, extruder. Includes regression test 2014-04-05 10:09:05 +02:00
Alessandro Ranellucci
a6dd68a2a6 Bugfix: crash when setting number of extruders. #1876 2014-04-05 09:54:43 +02:00
Alessandro Ranellucci
f308a46cd5 Bump version number 2014-04-02 20:25:05 +02:00
Alessandro Ranellucci
45559f87f3 Save the vector used for aligning object volumes to origin and apply it to additional parts added from the object part panel in order to make them coincide 2014-04-02 20:23:26 +02:00
Y. Sapir
4deeff995a Move extrusion path gcode generation to C++ for speed. 2014-04-01 21:11:43 +03:00
Y. Sapir
f56206cac3 Precache gcode_comments flag before path loop. 2014-04-01 21:11:43 +03:00
Y. Sapir
9f71ea15cf Precompute X and Y offsets before path loop. 2014-04-01 21:11:43 +03:00
Y. Sapir
576d02a20d Make set_dirty ignore changes that don't do anything. 2014-03-30 00:23:35 +03:00
Y. Sapir
09d7d9b034 Remove call to on_presets_changed from Tab Page's on_change. 
(set_dirty is called which handles it anyway.)
 2014-03-30 00:21:57 +03:00
Alessandro Ranellucci
017158c877 Update year to 2014 in about dialog 2014-03-27 15:33:17 +01:00
Alessandro Ranellucci
f41480ab8f Releasing 1.1.0 2014-03-27 11:15:39 +01:00
Alessandro Ranellucci
071097d3f1 Fix extruder assignment and tests 2014-03-27 00:01:33 +01:00
Alessandro Ranellucci
10bf334a58 Added one more failing test to address bad option priority hierarchy 2014-03-26 19:42:01 +01:00
Alessandro Ranellucci
0ff33f47f1 Fix the extruder override logic. All role-based extruder options now default to 0, meaning no override is defined and the default (inherited) extruder is used. The default extruder option does not use the shortcut logic anymore (it was thus moved to be a CLI-specific logic) 2014-03-26 00:08:15 +01:00
Alessandro Ranellucci
2e6213fea6 Prevent crash when changing number of extruders 2014-03-25 19:21:44 +01:00
Alessandro Ranellucci
d1bb69434e Handle non existing STL files gracefully 2014-03-25 19:06:51 +01:00
Alessandro Ranellucci
9b2445f0f5 Assign default material to OBJ files too 2014-03-25 15:39:13 +01:00
Alessandro Ranellucci
25191bd405 Prevent circular event handlers on Windows. #1856 2014-03-25 15:30:56 +01:00
Alessandro Ranellucci
f6f1517f58 Bugfix: the Add button in plater wasn't working anymore. #1856 2014-03-25 15:07:21 +01:00
Alessandro Ranellucci
7e3425d433 Bugfix: wizard wasn't run when user supplied an existing empty directory as --datadir 2014-03-25 14:07:03 +01:00
Alessandro Ranellucci
fed8783e30 New commands for exporting/importing full config bundles. Useful for printer vendors. #1365 2014-03-25 14:04:01 +01:00
Alessandro Ranellucci
c98c992b4d Revert wrong fix, applied because of bad understanding of the issue about deserialization of extruder_offset = 0x0 2014-03-25 01:20:46 +01:00
Alessandro Ranellucci
432a87e73d New option for forcing the generation of interface shells. #1847 2014-03-25 01:11:28 +01:00
Alessandro Ranellucci
6feff7fe53 Test that stacked cubes with distinct extruders don't generate any internal interface shells. #1847 2014-03-24 23:44:47 +01:00
Alessandro Ranellucci
72a6848f1b Fixed regression causing wrong relative positions of objects after splitting in plater. #1758 2014-03-24 21:42:38 +01:00
Alessandro Ranellucci
5ce4de0544 Bugfix: wrong inwards moves were calculated for 2+ copies because ExtrusionLoop objects were modified in place. Includes regression test. #1842 2014-03-24 20:01:14 +01:00
Alessandro Ranellucci
b4ac63d749 Error in previous commit: Bugfix: prevent crash when user entered Unicode characters in notes. #1590 2014-03-24 17:52:50 +01:00
Alessandro Ranellucci
ce984ef78c Revert "Error in previous commit: Bugfix: prevent crash when user entered Unicode characters in notes. #1590" 
This reverts commit e355e521d4.
 2014-03-24 17:52:14 +01:00
Alessandro Ranellucci
e355e521d4 Error in previous commit: Bugfix: prevent crash when user entered Unicode characters in notes. #1590 2014-03-24 17:02:25 +01:00
Alessandro Ranellucci
d9d2f3b3ab Bugfix: prevent crash when user entered Unicode characters in notes. #1590 2014-03-24 16:37:20 +01:00
Alessandro Ranellucci
7a58457add Prevent GUI from crashing when invalid values were written in numeric fields. Includes basic validation. #1709 2014-03-24 01:07:30 +01:00
Alessandro Ranellucci
67f3e9962b Prevent user from saving a preset with the "- default -" name. #1717 2014-03-23 21:40:45 +01:00
Alessandro Ranellucci
5d3c8575c5 Bugfix: holes were not sorted using the nearest-neighbor search, resulting in inefficient paths. #1785 2014-03-23 19:55:31 +01:00
Alessandro Ranellucci
ea3266c6e9 Fix modifiers 2014-03-23 16:56:41 +01:00
Alessandro Ranellucci
fec41d6dfd Update plater and print upon changing object parts and their settings 2014-03-23 16:45:55 +01:00
Alessandro Ranellucci
67ef3f1799 Assign a default extruder for newly added parts too 2014-03-23 15:25:26 +01:00
Alessandro Ranellucci
d75417601e Make the override panel prettier and prevent the default extruder setting from being deleted since it can't be readded manually 2014-03-23 15:18:08 +01:00
Alessandro Ranellucci
bf8c388568 Use a popup menu for part settings 2014-03-23 13:46:05 +01:00
Alessandro Ranellucci
21e6de0e59 Only expand shortcut options in StaticConfig objects. This way we can keep a default extruder value in the parts panel 2014-03-22 20:12:54 +01:00
Alessandro Ranellucci
61db9530d9 Fix AMF settings not being correctly propagated to plater and parts panel 2014-03-22 18:02:58 +01:00
Alessandro Ranellucci
6a157c22c2 Fixed minor fatal error 2014-03-22 17:44:42 +01:00
Alessandro Ranellucci
f71ac8cd65 Merge the Object Settings tab into the Parts tab 2014-03-22 17:41:14 +01:00
Alessandro Ranellucci
b5b735c988 ComboBox for fill density values 2014-03-22 17:01:48 +01:00
Alessandro Ranellucci
7421a7bf63 Turn fill_density into percentage 2014-03-22 16:23:33 +01:00
Alessandro Ranellucci
30aa255bb5 Correctly disable and reset the override settings panel 2014-03-21 22:15:33 +01:00
Alessandro Ranellucci
bf352de224 Replaced icon for modifier meshes and fixed delete button not being disabled when no part was selected 2014-03-21 22:06:47 +01:00
Alessandro Ranellucci
34f1511e0c Better fix for non-global options not being replaced in filename placeholders. Includes refactoring and a new PlaceholderParser class. Also includes regression tests. #1831 2014-03-17 00:39:07 +01:00
Alessandro Ranellucci
bc054e613c Fix regression causing non-global config options to be ignored when replacing placeholders in output filename format. #1831 2014-03-15 20:45:10 +01:00
Alessandro Ranellucci
96c2c21707 Minor bugfix for preventing wrong extruder numbers from being assigned 2014-03-15 18:24:56 +01:00
Alessandro Ranellucci
52de292a48 Fixed wrong refactoring of perimeter tree traversal. #1832 2014-03-15 02:16:04 +01:00
Alessandro Ranellucci
b71d28bd5a Fix minor error and update MANIFEST 2014-03-11 19:19:34 +01:00
Alessandro Ranellucci
f344426873 Better linear gap fill, now with adaptive extrusion width 2014-03-11 19:08:14 +01:00
Alessandro Ranellucci
98b7ae0022 Initial implementation of linear gap fill 2014-03-09 21:26:03 +01:00
Alessandro Ranellucci
7f5442265e Include thin walls in general top-level perimeter sorting to get more efficient paths 2014-03-09 20:19:30 +01:00
Alessandro Ranellucci
2a73ab988f Recursive pruning. Some more unit tests 2014-03-09 17:46:02 +01:00
Alessandro Ranellucci
04d80ca392 Some improvements to pruning and some additions here and there 2014-03-05 18:43:01 +01:00
Alessandro Ranellucci
c2ed6090d3 Fix the max width supplied to medial axis code: it's up to two extrusions 2014-03-05 00:53:51 +01:00
Alessandro Ranellucci
4a894b1e20 Add safety offset to thin wall regions to prevent overlapping geometry and corrupt Voronoi diagram 2014-03-05 00:45:17 +01:00
Alessandro Ranellucci
3c77b301a7 Promising approach to medial axis pruning 2014-03-04 23:33:13 +01:00
Alessandro Ranellucci
8644440070 Minor improvements to SVG debug output for medial axis 2014-03-03 14:20:15 +01:00
Alessandro Ranellucci
eadffe4a9e Merge branch 'master' into boost-medialaxis 
Conflicts:
	lib/Slic3r/Layer/Region.pm
	xs/src/ExPolygon.cpp
	xs/src/Point.cpp
	xs/src/Point.hpp
	xs/src/TriangleMesh.cpp
	xs/t/01_trianglemesh.t
 2014-03-02 22:36:20 +01:00
Alessandro Ranellucci
0f9e143ba1 Removed debugging line 2014-03-02 00:44:16 +01:00
Alessandro Ranellucci
2295d48947 Better pruning of thin walls to avoid unwanted extra extrusions. Includes regression test. #1794 
Conflicts:

	lib/Slic3r/Layer/Region.pm
 2014-03-02 00:31:17 +01:00
Alessandro Ranellucci
a344d68257 Use bridge speed for first solid layer above sparse infill. Includes unit test. #1792 2014-03-01 20:35:44 +01:00
Mark Hindess
59ebdebf72 Revert "Fix crash reported by Simooon on #Slic3r." 
It turns out this helped on the version of stable I was using
but not on master.

This reverts commit 8df6e2d930.
 2014-02-16 14:00:28 +00:00
Mark Hindess
8df6e2d930 Fix crash reported by Simooon on #Slic3r. 
Error was:

  Argument "" isn't numeric in subroutine entry at
    lib/Slic3r/GUI/OptionsGroup.pm line 392
 2014-02-16 12:05:01 +00:00
Alessandro Ranellucci
e837183327 Fixed regression when using --infill-only-where-needed. Includes regression test. #1721 2014-02-16 12:48:07 +01:00
Alessandro Ranellucci
878deb8183 Write material config to AMF files. Remove the old Materials tab. Update custom settings when a part is selected 2014-02-15 00:36:52 +01:00
Alessandro Ranellucci
691db31da0 Some incomplete work for per-region config 2014-02-14 22:26:00 +01:00
Alessandro Ranellucci
2e7b29fbdd Minor layout changes to the Parts editor 2014-02-14 22:25:59 +01:00
Alessandro Ranellucci
bf307371f4 Use a plain list instead of a tree to display object parts 2014-02-14 22:25:59 +01:00
Alessandro Ranellucci
df508551d0 Refresh plater canvas when switching presets 2014-02-14 22:25:58 +01:00
Alessandro Ranellucci
4c650a6d80 Fix regression about percent extrusion width not being validated. Includes regression test 2014-02-13 18:42:49 +01:00
Alessandro Ranellucci
49d290accf Fixed spiral vase regressions. Includes regression tests. #1773 2014-02-13 16:11:12 +01:00
Alessandro Ranellucci
0060873f1c Regression test and incomplete fix for bug affecting wrong spiral vase output. #1773 
Conflicts:

	lib/Slic3r/GCode/Layer.pm
 2014-02-13 16:11:02 +01:00
Alessandro Ranellucci
94cb298eec Make OpenGL optional for the new parts dialog. #1731 2014-02-11 01:09:10 +01:00
Alessandro Ranellucci
b961849c38 Bugfix: crashing when concentric infill produced very narrow loops. #1740 
Conflicts:

	lib/Slic3r/Fill/Concentric.pm
 2014-02-10 16:05:40 +01:00
Alessandro Ranellucci
3d483722c6 Perform additional checks before merging solid surfaces (i.e. take flow and fill pattern into account) 2014-02-10 13:19:44 +01:00
Alessandro Ranellucci
634ccb33ab Fix regression in Config->setenv affecting post-processing scripts. Includes regression test 2014-02-09 23:14:32 +01:00
Alessandro Ranellucci
bba69ed22f Merge pull request #1742 from treygreer/master 
fixed simple config load bug
 2014-02-07 02:12:42 +01:00
Alessandro Ranellucci
ffc891d885 Bugfix: when processing with fill_density = 0, top/bottom solid shells were missing regions thinner than 3 * extrusion width. Includes regression test. #1602 
Conflicts:

	lib/Slic3r/Print/Object.pm
	t/fill.t
 2014-02-07 02:07:21 +01:00
Trey Greer
0dba3dee58 fixed simple config load bug 2014-01-28 19:05:20 -05:00
Alessandro Ranellucci
42519174cd New erase() method for DynamicConfig objects 2014-01-22 21:15:19 +01:00
Alessandro Ranellucci
b5b8fb606f Basic functionality of the Parts tab is complete 2014-01-22 21:15:19 +01:00
Alessandro Ranellucci
7387e60706 More incomplete work 2014-01-22 21:15:19 +01:00
Alessandro Ranellucci
b20caa4e31 Completed parts visualization with highlighting 2014-01-22 21:15:19 +01:00
Alessandro Ranellucci
3f4f27fa5d Some incomplete work for interactive part editor 2014-01-22 21:15:18 +01:00
Alessandro Ranellucci
fd43ada293 Remove duplicated "Generating skirt" status message 2014-01-18 16:36:13 +01:00
Alessandro Ranellucci
90194ee581 Fix overflow in Point::ccw() affecting convex hull generation. Includes regression test 2014-01-17 14:49:51 +01:00
Alessandro Ranellucci
86f91bb3c4 New TriangleMeshSlicer::cut() method 2014-01-16 11:25:26 +01:00
Alessandro Ranellucci
dfd9bc8958 Bugfix: prevent fatal error in the rare case that no bridge anchors are found. #1607 2014-01-15 00:24:37 +01:00
Alessandro Ranellucci
a40556ab56 Repair meshes after splitting 2014-01-14 22:06:28 +01:00
Alessandro Ranellucci
79a2bab261 Revert stupid change that broke plater and provide the correct fix for --info 2014-01-14 21:46:39 +01:00
Alessandro Ranellucci
28a39f0275 Fix garbage collection of recently added classes 2014-01-14 20:11:08 +01:00
Alessandro Ranellucci
51af10da4f Some fixes to config API 2014-01-12 12:35:13 +01:00
Alessandro Ranellucci
12b661e877 Adapt skirt logic to the potential situation of objects with different layer heights 2014-01-12 11:06:21 +01:00
Alessandro Ranellucci
a51743a8c1 Bugfix: lack of strong type checking when passing arrayref objects to XS caused random lack of infill. Now added strong type checking for all XS entities. Also fixes a potential issue with bridges caused by the same error. #1652 
Conflicts:

	lib/Slic3r/Layer/Region.pm
 2014-01-12 00:54:10 +01:00
Alessandro Ranellucci
e68cbede6e Add scale rotate duplicate_grid to @Ignore and fix @Ignore which was ignored 2014-01-11 23:46:20 +01:00
Alessandro Ranellucci
89d3dbaa5a Bugfix: incorrect number of raft layers was generated when too few were requested. #1678 
Conflicts:

	lib/Slic3r/Print/Object.pm
 2014-01-11 23:26:48 +01:00
Alessandro Ranellucci
e7349622a2 Removed dependency on Storable; some fixes in Build.PL. #1693 2014-01-11 21:46:22 +01:00
Alessandro Ranellucci
c99b9d91db Fix bug in regression infill causing bad clipping at very low layer heights. Includes regression test. #1669 
Conflicts:

	lib/Slic3r/Fill/Rectilinear.pm
 2014-01-11 21:34:26 +01:00
Alessandro Ranellucci
3084876e60 Fixed --info 2014-01-11 18:05:14 +01:00
Alessandro Ranellucci
ea173cf815 Bugfix: ambiguous semantics of the layers_count() method caused M73 to go beyond 100%. #1670 
Conflicts:

	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
 2014-01-11 17:40:09 +01:00
Alessandro Ranellucci
c0a74780cb The ratio_over parameter was missing in the definition of first_layer_extrusion_width 2014-01-11 14:48:13 +01:00
Alessandro Ranellucci
ed3a6349c7 Adapt the new gcode.t test to master (and subtract final retraction from used filament length) 2014-01-11 14:42:31 +01:00
Alessandro Ranellucci
9515acf527 Put a hard limit on manually configured extrusion widths (10 * the largest nozzle diameter configured) to prevent confusion when a bad value is entered. #1691 
Conflicts:

	lib/Slic3r/Config.pm
 2014-01-11 14:32:42 +01:00
Alessandro Ranellucci
7b0decbeb1 Finished implementing Boost.Polygon medial axis. Some cleanup needed 2014-01-10 16:18:55 +01:00
Alessandro Ranellucci
07a4c37c4c Semi-working Boost.Polygon medial axis. Hangs after perimeters, though. Needs pruning and chaining 2014-01-10 11:47:16 +01:00
Alessandro Ranellucci
bf91f3096a Incomplete work for using Boost.Polygon to compute medial axis 2014-01-09 17:26:39 +01:00
Alessandro Ranellucci
11f065ca5e New object dialog tab with list of materials and volumes 2014-01-08 19:36:41 +01:00
Alessandro Ranellucci
6da98a6ecc Fix GUI 2014-01-07 19:08:37 +01:00
Alessandro Ranellucci
c8a48b4527 Implement modifier volumes and port _merge_loops() to XS 2014-01-07 15:40:38 +01:00
Alessandro Ranellucci
b17d06f9d1 Finished porting BoundingBox to XS 2014-01-07 12:48:09 +01:00
Alessandro Ranellucci
9c0a6a79d3 Incomplete work for porting BoundingBox to XS 2014-01-06 18:29:10 +01:00
Alessandro Ranellucci
3e93a14912 New support material pattern: pillars! 2014-01-05 16:51:16 +01:00
Alessandro Ranellucci
499b34dea1 Catch any click inside thumbnail's contour for easier selection of thin-walled objects 2014-01-05 15:02:12 +01:00
Alessandro Ranellucci
0bdea60b53 Merge branch 'region-config' 
Conflicts:
	lib/Slic3r/Format/AMF/Parser.pm
 2014-01-05 14:59:36 +01:00
Alessandro Ranellucci
2754ddf215 Fix positioning of loded AMF plates 2014-01-05 14:04:32 +01:00
Alessandro Ranellucci
036badf932 Ported Flow to XS 2014-01-05 13:16:13 +01:00
Alessandro Ranellucci
87342d324c Fix typo 2014-01-05 01:25:39 +01:00
Alessandro Ranellucci
4e76a9e4c9 Parse options from AMF metadata 2014-01-05 01:24:31 +01:00
Alessandro Ranellucci
07b9b12475 Make tests pass 2014-01-05 00:36:33 +01:00
Alessandro Ranellucci
a2cbb261cb More work for refactoring Flow/Extruder 2014-01-03 20:02:00 +01:00
Alessandro Ranellucci
8ed738d3f7 More incomplete work for Flow/Extruder refactoring 2014-01-03 18:27:46 +01:00
Alessandro Ranellucci
52ce6e4a7b Some initial work for refactoring Print->extruders 2014-01-03 10:44:36 +01:00
Alessandro Ranellucci
b9793b3f12 Moved first_layer_extrusion_width to PrintConfig 2014-01-03 00:34:30 +01:00
Alessandro Ranellucci
81663215c5 Adapt plater to the new split config 2014-01-02 22:06:58 +01:00
Alessandro Ranellucci
bfa2ee2770 Remove scale, rotate, duplicate, duplicate_grid from config (but leave them in CLI) 2014-01-02 18:01:21 +01:00
Alessandro Ranellucci
385e0e0974 Refactoring: new Slic3r::Print::Simple class for non-interactive slicing (used in CLI and Quick Slice) 2014-01-02 17:54:18 +01:00
Alessandro Ranellucci
5bf0942f45 Satisfy test suite and CLI 2014-01-02 17:24:23 +01:00
Alessandro Ranellucci
e2f1040a76 More work 2014-01-02 10:44:54 +01:00
Alessandro Ranellucci
0883d0f4eb More work here and there 2014-01-01 17:29:15 +01:00
Alessandro Ranellucci
83326845dd More incomplete work 2013-12-31 14:33:03 +01:00
Alessandro Ranellucci
d29e341a8b Parse options from AMF metadata 2013-12-30 19:00:32 +01:00
Alessandro Ranellucci
beb1baa096 Incomplete work for refactoring regions and flows 2013-12-30 18:28:41 +01:00
Alessandro Ranellucci
ca2952060d Draw more detailed thumbnails in plater and turn cursor to hand also when moving inside holes (otherwise objects with thin walls would not be easy to select) 2013-12-29 01:28:06 +01:00
Alessandro Ranellucci
13d7b39072 Fix random crashes on 32-bit. Thank you Valgrind 2013-12-28 15:37:04 +01:00
Alessandro Ranellucci
57e4e5c8e1 One more fix for ooze_prevention and skirt_height == -1 2013-12-24 15:33:54 +01:00
Alessandro Ranellucci
f9d38f6655 Allow value -1 for skirt_height with the meaning of: as tall as the object. This might fix an overflow on 32-bit systems when ooze_prevention is enabled 2013-12-24 15:16:10 +01:00
Alessandro Ranellucci
bd133d9434 Update Clipper to 6.1.2 2013-12-24 12:40:46 +01:00
Alessandro Ranellucci
1a690589a8 Satisfy test suite 2013-12-24 12:03:30 +01:00
Alessandro Ranellucci
2956c1a2e5 More work for removing references to $Slic3r::Config 2013-12-24 11:58:36 +01:00
Alessandro Ranellucci
1157a7f859 Remove package variable $Slic3r::Config 2013-12-24 11:29:31 +01:00
Alessandro Ranellucci
7ddf4f3ddf Fixes to complete_objects to make t/gcode.t pass 2013-12-24 01:13:02 +01:00
Alessandro Ranellucci
c5ead0f2a6 Fixes to Config and plater; also refactored the arrange() code 2013-12-24 00:30:51 +01:00
Alessandro Ranellucci
87c5427010 Fixed regression causing incomplete gap fill when all configured perimeters were successfully generated. #1589 2013-12-23 21:23:26 +01:00
Alessandro Ranellucci
7389bf3953 Partially revert cacbaa7319: no need for it in master branch 2013-12-23 20:40:44 +01:00
Alessandro Ranellucci
cacbaa7319 Fix regression causing thin walls to come out as zigzag paths. #1573 #1575 2013-12-23 20:37:46 +01:00
Alessandro Ranellucci
20f1f3d2b4 Fix regression preventing raft from being generated for the entire object footprint. #1614 #1567 2013-12-23 20:31:50 +01:00
Alessandro Ranellucci
fc5aac0ff6 Bugfix: fan wasn't turned on for bridges when vibration limit or another internal post-processor was enabled. Includes regression test. #1533 2013-12-23 01:19:53 +01:00
Alessandro Ranellucci
4f58a1c401 Rewrite avoid_crossing_perimeters() to fix a regression and get better performance by choosing regular points along contours. #1531 
Conflicts:

	lib/Slic3r/GCode/MotionPlanner.pm
 2013-12-22 19:07:07 +01:00
Alessandro Ranellucci
ab25cc4940 Merge branch 'xs-config' 
Conflicts:
	lib/Slic3r/Config.pm
	xs/MANIFEST
 2013-12-22 01:41:55 +01:00
Alessandro Ranellucci
c0070a8d54 Satisfy test suite with new XS based config 2013-12-22 01:38:10 +01:00
Alessandro Ranellucci
9fb62e671f Adapt GUI to new XS Config 2013-12-22 01:27:09 +01:00
Alessandro Ranellucci
4515d90052 Finished porting Config and option definition to XS 2013-12-22 00:39:03 +01:00
Alessandro Ranellucci
9836e963a5 Incomplete work for adapting the application to the new XS-based Config 2013-12-21 21:06:45 +01:00
Alessandro Ranellucci
1b9079ffbe Merge branch 'xs-model' 2013-12-20 01:41:13 +01:00
Alessandro Ranellucci
1cee992604 Temporarily disabled step-based slicing 2013-12-20 01:38:00 +01:00
Alessandro Ranellucci
a6a6a6888b Ported Slic3r::Print::State to XS 2013-12-20 01:36:42 +01:00
Alessandro Ranellucci
d2295cdf70 New Slic3r::Print::State class 2013-12-19 18:54:24 +01:00
Alessandro Ranellucci
685e8e4dfa More work for step-based slicing 2013-12-19 15:23:10 +01:00
Alessandro Ranellucci
5280b05ebb Initial work for step refactoring 2013-12-19 12:11:02 +01:00
Alessandro Ranellucci
38ea5f79d7 Merge branch 'xs-model' 2013-12-18 19:20:23 +01:00
Alessandro Ranellucci
266673213d New option for turning autocentering off. #404 2013-12-18 19:11:20 +01:00
Alessandro Ranellucci
15235699e4 Completed adapting plater behavior to new Print object API 2013-12-18 18:54:11 +01:00
Alessandro Ranellucci
916a0a0e58 Fix compilation and test suite 2013-12-18 16:34:31 +01:00
Alessandro Ranellucci
a12b1765d6 Fixed wrong commit f495136. Thanks pdbogen for the report. #1623 2013-12-18 10:21:17 +01:00
Alessandro Ranellucci
0591eecab7 Lazy mesh generation so that we only keep it in model object 2013-12-18 00:13:41 +01:00
Alessandro Ranellucci
f4951367ea Fixed fatal error about missing method thin_walls(). #1607 #1615 2013-12-17 16:17:15 +01:00
Alessandro Ranellucci
e4c9171890 Handle read_from_file() exceptions in GUI. #1619 2013-12-17 16:14:00 +01:00
Alessandro Ranellucci
94743d3af0 Handle read_from_file() exceptions in GUI. #1619 2013-12-17 16:11:42 +01:00
Alessandro Ranellucci
2d045d1f39 Removed extra line 2013-12-17 16:01:25 +01:00
Alessandro Ranellucci
02df73c94b More refactoring to clean up the Print object API 2013-12-16 00:54:59 +01:00
Alessandro Ranellucci
d3171b1eea More work for updating the embedded Print object when Model is changed in plater 2013-12-16 00:36:53 +01:00
Alessandro Ranellucci
fcbd62f07c Finished updating plater to the new centering logic 2013-12-15 23:50:05 +01:00
Alessandro Ranellucci
4993b12799 Some initial work for adapting plater to the new centering workflow 2013-12-15 18:00:44 +01:00
Alessandro Ranellucci
250608aa52 Move centering outside the Print object 2013-12-15 16:17:12 +01:00
Alessandro Ranellucci
2eff7c238e Some initial work for stateful Print object 2013-12-13 14:02:01 +01:00
Alessandro Ranellucci
14c97978c7 Use 0,0 for default instance 2013-12-13 12:24:23 +01:00
Alessandro Ranellucci
21ca1901c1 Merge branch 'xs-model' 
Conflicts:
	lib/Slic3r/Model.pm
 2013-12-13 12:22:17 +01:00
Alessandro Ranellucci
5470fbbebc Make quick_slice() work with new model handling 2013-12-13 12:18:30 +01:00
Alessandro Ranellucci
0e8a0ef1ca Refactoring. Use Model class for representing the plate in GUI 2013-12-12 20:19:33 +01:00
Alessandro Ranellucci
f55e057504 More work for refactoring add_model() to add_model_object(). Tests pass 2013-12-09 01:12:37 +01:00
Alessandro Ranellucci
a02ce3257e Merge branch 'stable' 2013-12-07 21:03:57 +01:00
Alessandro Ranellucci
0afee63e84 Fixed regression in object placement in STL export. #1552 2013-12-07 21:03:10 +01:00
Alessandro Ranellucci
361ca1568a Raise version number in master branch 2013-12-07 18:25:35 +01:00
Alessandro Ranellucci
12db58c9d0 Merge branch 'stable' 2013-12-07 14:54:07 +01:00
Alessandro Ranellucci
00e8ba4781 Fix regression causing complete_objects to skip Z moves after first object is complete. Includes regression test. #1582 #1541 2013-12-07 14:52:59 +01:00
Alessandro Ranellucci
0339d5423d Merge branch 'master' into xs-model 2013-12-06 22:48:42 +01:00
Alessandro Ranellucci
f4d12b5930 Don't return the cached bounding box but clone it 2013-12-06 22:48:12 +01:00
Alessandro Ranellucci
72fe6d903c Don't return the cached bounding box but clone it 2013-12-06 19:34:50 +01:00
Alessandro Ranellucci
7871673bf6 Initial work for new model handling 2013-11-27 12:18:24 +01:00
Alessandro Ranellucci
57fd6ad563 Removed dependency on ->object from Region.pm 2013-11-26 18:46:48 +01:00
Alessandro Ranellucci
bd8c430afd Merge branch 'stable' 
Conflicts:
	lib/Slic3r/Geometry/Clipper.pm
	lib/Slic3r/Layer/Region.pm
 2013-11-24 22:48:31 +01:00
Alessandro Ranellucci
3fca0956bc Adapt plater to new convex hull 2013-11-24 22:42:52 +01:00
Alessandro Ranellucci
bed1625d6b Split objects could not be repositioned in plater. 3D preview and stats were not available too. #1543 2013-11-24 14:28:17 +01:00
Alessandro Ranellucci
22605418ba Removed recursion warning in brim 2013-11-24 13:08:13 +01:00
Alessandro Ranellucci
387df3b900 Fix regression causing toolchange_gcode to crash Slic3r. Includes regression test. #1545 2013-11-24 13:04:16 +01:00
Alessandro Ranellucci
5217bc370a Fix regression causing retraction restarts to ignore extrusion_axis. Includes regression test. #1547 2013-11-24 12:37:36 +01:00
Alessandro Ranellucci
9cf138574c New TriangleMesh::convex_hull() 2013-11-24 01:15:52 +01:00
Alessandro Ranellucci
a29eeb7789 Fix t/geometry.t 2013-11-24 00:59:45 +01:00
Alessandro Ranellucci
a93c862338 Ported traverse_pt() to XS 2013-11-23 23:21:59 +01:00
Alessandro Ranellucci
b47b8ee34f Adapt new code to contains_point() 2013-11-23 22:45:17 +01:00
Alessandro Ranellucci
fc4483d09c Do perimeters one island at time instead of doing all holes before all contours 2013-11-23 22:45:00 +01:00
Alessandro Ranellucci
97c65bac90 Do perimeters one island at time instead of doing all holes before all contours 2013-11-23 22:43:30 +01:00
Alessandro Ranellucci
30297ee4dc Removed chained_path_items() 2013-11-23 21:47:33 +01:00
Alessandro Ranellucci
0045f84ed2 Removed chained_path_points() 2013-11-23 21:42:01 +01:00
Alessandro Ranellucci
0516aac715 Ported chained_path() to XS 2013-11-23 21:39:05 +01:00
Alessandro Ranellucci
4d5d003ba7 Ported horizontal_projection() to XS 2013-11-23 19:41:40 +01:00
Alessandro Ranellucci
e75dbf37fa Never scale TriangleMesh objects 2013-11-23 19:25:33 +01:00
Alessandro Ranellucci
46e3b3180e Ported Surface->offset() to XS 2013-11-23 18:29:25 +01:00
Alessandro Ranellucci
a331f4d27a Finished porting group() to XS 2013-11-23 18:15:59 +01:00
Alessandro Ranellucci
878d587196 Ported is_solid() and is_bridge() to XS. Also ported (but not used yet) group() to SurfaceCollection::group() 2013-11-23 00:07:04 +01:00
Alessandro Ranellucci
de9d5403e8 Finished porting convex_hull() to XS and removed dependency on Math::ConvexHull::MonotoneChain 2013-11-22 22:48:07 +01:00
Alessandro Ranellucci
4577f0725c Incomplete work for XS-based convex_hull 2013-11-22 21:43:35 +01:00
Alessandro Ranellucci
a950fbe0c2 Removed more unused functions and fixed tests 2013-11-22 16:19:15 +01:00
Alessandro Ranellucci
132d170f73 Ported simplify() to XS and removed dependency on Boost::Geometry::Utils 2013-11-22 16:01:50 +01:00
Alessandro Ranellucci
df8d889481 More unfinished work 2013-11-22 02:16:10 +01:00
Alessandro Ranellucci
518798beb3 Incomplete work for porting simplify() to XS 2013-11-21 20:25:24 +01:00
Alessandro Ranellucci
7475762a27 Remove residual uses of Boost for line clipping 2013-11-21 18:47:25 +01:00
Alessandro Ranellucci
3aef663f7f Removed clip_with_polygon() and clip_with_expolygon() 2013-11-21 18:16:03 +01:00
Alessandro Ranellucci
ac88fbcbb0 Ported clip_end(), length(), is_perimeter(), is_fill(), is_bridge() to XS 2013-11-21 18:03:40 +01:00
Alessandro Ranellucci
761f261a68 Ported intersect_expolygons() and subtract_expolygons() to XS 2013-11-21 17:53:50 +01:00
Alessandro Ranellucci
5f81292f3f Ported encloses_point() to XS and renamed to contains_point() 2013-11-21 16:21:42 +01:00
Alessandro Ranellucci
a225a8b2ef Ported contains_line() to XS 2013-11-21 15:12:06 +01:00
Alessandro Ranellucci
bd62de7653 Renamed encloses_line() to contains_line() and implemented it using diff_pl() 2013-11-21 14:35:28 +01:00
Alessandro Ranellucci
3025c77675 Use Clipper for line clipping 2013-11-21 14:15:38 +01:00
Alessandro Ranellucci
c5f7318fc9 Removed debugging statement 2013-11-20 15:38:51 +01:00
Alessandro Ranellucci
50c0081d25 Update Clipper to 6.0.0 2013-11-20 11:35:58 +01:00
Alessandro Ranellucci
d49052779f Remove useless code (thin walls and gaps are detected by the same logic now, so no need for additional checks) 2013-11-19 15:55:22 +01:00
Alessandro Ranellucci
b1ca0f30f2 Version number was not correctly saved 2013-11-18 18:48:06 +01:00
Alessandro Ranellucci
754e6ac74b Update version number. Releasing 1.0.0RC1! 2013-11-18 18:27:12 +01:00
Alessandro Ranellucci
583fc767d8 Fix regression in Avoid Crossing Perimeters. #1531 2013-11-18 17:20:48 +01:00
Alessandro Ranellucci
abe56f96da Cleaner logic for perimeters, thin walls and gaps. More correct results and faster processing 2013-11-18 17:06:08 +01:00
Alessandro Ranellucci
d4d8045905 Put standby_temperature into options cemetery. #1523 2013-11-16 12:45:43 +01:00
Alessandro Ranellucci
beb7939e22 Rename standby_temperature to ooze_prevention. #1523 2013-11-15 16:01:15 +01:00
Alessandro Ranellucci
5e78f8a0b0 Make sure all extruders are outside skirt at toolchange when standby_temperature is enabled 2013-11-15 15:52:11 +01:00
Alessandro Ranellucci
f733ef5f6b Handle non-thread-safe Math::Geometry::Voronoi. #1527 2013-11-15 12:55:53 +01:00
Alessandro Ranellucci
ab3e5b5a2c No support when --support-material-interface-layers was set to 1. #1515 2013-11-14 18:13:57 +01:00
Alessandro Ranellucci
bb37048c35 Added missing encoding in STL repair 2013-11-13 11:12:06 +01:00
Alessandro Ranellucci
4be1e5702a Free memory after closing the preview and the setting windows 2013-11-12 21:49:34 +01:00
Alessandro Ranellucci
2c416cc4ac Reduce width of text/spin controls because they're too large on Windows 2013-11-12 17:14:37 +01:00
Alessandro Ranellucci
85232bb6fd Fix a minor visualization glitch on Windows 2013-11-12 14:34:03 +01:00
Alessandro Ranellucci
faa54ced52 Share the thumbnail object instead of returning it from thread 2013-11-12 14:30:13 +01:00
Alessandro Ranellucci
d0cbf56354 Workaround "Attempt to free unreferenced scalar..." on Linux 32-bit 2013-11-12 12:10:32 +01:00
Alessandro Ranellucci
76213fb5b7 Save the last used Slic3r version and display a notice to encourage legacy users to revert their support material settings to the defaults 2013-11-11 22:20:25 +01:00
Alessandro Ranellucci
004517ad04 Automatically copy Simple Mode settings into a 'Simple Mode' preset in Expert Mode 2013-11-11 22:02:12 +01:00
Alessandro Ranellucci
33e160c1ed Automatically save presets after running the wizard 2013-11-11 21:45:58 +01:00
Alessandro Ranellucci
885ab5844e Ported regular_points() to XS and renamed it to equally_spaced_points() 2013-11-11 20:59:58 +01:00
Alessandro Ranellucci
6bb425e88d Minor fix about raft and support after previous commit 2013-11-11 20:50:22 +01:00
Alessandro Ranellucci
9f41f0279e Some work to reduce recursive dependencies between classes 2013-11-11 20:37:06 +01:00
Alessandro Ranellucci
bad8afdcda Fix regression causing incomplete output filepath expansion. #1514 2013-11-11 00:08:50 +01:00
Alessandro Ranellucci
655a546b04 Add .ngc to G-code file name suffixes 2013-11-10 23:37:59 +01:00
Alessandro Ranellucci
8d9361280e Bugfix: expert mode was crashing when home path contained non-ASCII 
characters on Windows. #1478
 2013-11-10 17:06:59 +01:00
Alessandro Ranellucci
928c4741c2 Fix regression in t/shells.t due to things ported to XS 2013-11-08 11:35:02 +01:00
Alessandro Ranellucci
c133a33ed2 Ported point_line_distance() and removed same_point() 2013-11-06 23:08:03 +01:00
Alessandro Ranellucci
09be25a156 Removed useless functions 2013-11-06 21:09:28 +01:00
Alessandro Ranellucci
d8e098ab0e Ported same_line() to XS 2013-11-06 19:38:10 +01:00
Alessandro Ranellucci
b5aaeb9b12 More work on the clipping method for medial axis. Includes Polyline->is_valid() 2013-11-06 19:30:45 +01:00
Alessandro Ranellucci
849d69d178 Fix regression in chained_path() introduced in fb763b0187. Includes regression test. #1184 2013-11-02 18:00:55 +01:00
Alessandro Ranellucci
4755e61d71 Bugfix: [input_filename] and [input_filename_base] were only available in the filename pattern and not in the custom G-code settings. #1507 2013-11-02 15:49:20 +01:00
Alessandro Ranellucci
0b63afb370 Fix complete_objects after XS port. Includes regression test. #1511 2013-11-02 14:44:30 +01:00
Alessandro Ranellucci
f491b7ba71 Fix t/support.t 2013-11-02 11:32:23 +01:00
Alessandro Ranellucci
3f7adfc07d Fix raft_layers according to the new support material logic 2013-11-02 11:16:44 +01:00
Alessandro Ranellucci
d7656f5fdc Use minimum extrusion width for support material too 2013-10-28 14:04:50 +01:00
Alessandro Ranellucci
ff25cc97fa Explicitely clip support material with object slices (test case from #1397) 2013-10-27 23:20:06 +01:00
Alessandro Ranellucci
29b83517cb Ported point_along_segment(), Polyline::length(), Polyline::clip_end() to XS 2013-10-27 22:57:25 +01:00
Alessandro Ranellucci
26a18a2a52 Temporarily revert to Voronoi-based medial axis 2013-10-27 22:02:57 +01:00
Alessandro Ranellucci
4f64e557d9 Typo 2013-10-27 21:38:32 +01:00
Alessandro Ranellucci
31f77748e7 Explain in the tooltip how is the threshold angle measured 2013-10-27 21:37:26 +01:00
Alessandro Ranellucci
a99d34a91a Bad memory access in regular_points() 2013-10-27 20:55:55 +01:00
Alessandro Ranellucci
58d92ac36a Support interface_layers == 0 2013-10-27 18:54:52 +01:00
Alessandro Ranellucci
bcc061176c New option to use G10/G11 for firmware-controlled retraction. #1494 2013-10-27 16:59:18 +01:00
Alessandro Ranellucci
0e3c9ebe52 Extend interface into base support when the latter is contained in a hole (for better interface anchoring) and fix contact loops when object is enclosed in a hole 2013-10-27 16:37:04 +01:00
Alessandro Ranellucci
4cba5111a3 Fix generation of contact loops 2013-10-27 15:22:44 +01:00
Alessandro Ranellucci
06e7a1ae68 Optimizations to regular_points(), clip_end(), clip_start() 2013-10-27 13:51:59 +01:00
Alessandro Ranellucci
28e9682d0e Several changes to support material, including a fix to prevent vertical overlapping and horizontal fusion of support and object 2013-10-27 10:19:26 +01:00
Alessandro Ranellucci
c08d4cc798 Fixed support unit tests and reduced dependency on $object 2013-10-26 17:56:59 +02:00
Alessandro Ranellucci
bdf825d078 Refactoring: split support material code into several methods 2013-10-26 17:20:54 +02:00
Alessandro Ranellucci
1741adaddf Removed debugging line 2013-10-26 09:53:32 +02:00
Alessandro Ranellucci
b653839e9a One more fix for Cancel button. #1461 2013-10-16 15:13:39 +02:00
Alessandro Ranellucci
127e38d4a4 Fix Cancel button. #1461 2013-10-14 22:07:41 +02:00
Alessandro Ranellucci
4c2c31b554 Fix speed math for wipe, which was causing too fast retraction. Includes regression test. #1468 2013-10-13 17:05:22 +02:00
Alessandro Ranellucci
bc0b9e1b72 Don't combine retract and travel anymore when using G0. #1289 2013-10-13 16:20:01 +02:00
Alessandro Ranellucci
e6b59aef4e Fix planepath fill patterns for very small regions. #1463 2013-10-13 16:07:14 +02:00
Alessandro Ranellucci
9918c1e97d Minor improvements in debug output 2013-10-13 12:12:03 +02:00
Alessandro Ranellucci
f603db5e84 Fix --export-svg 2013-10-13 11:45:22 +02:00
Alessandro Ranellucci
ac5e713323 Fix segfault when calling chained_path() on an ExtrusionPathCollection using no_sort. Includes regression test 2013-09-28 15:30:10 +02:00
Mark Hindess
f523c095b1 Trivial fix for support-related undefined sub errors. 2013-09-24 09:54:23 +01:00
Alessandro Ranellucci
0b526afb4e Change labels in wizard to avoid confusion 2013-09-21 20:25:34 +02:00
Alessandro Ranellucci
0ef6311ac3 Do not set first layer bed temperature if user set bed temperature to zero in wizard 2013-09-21 20:14:17 +02:00
Alessandro Ranellucci
197cd8e68b Typo 2013-09-19 16:09:47 +02:00
Alessandro Ranellucci
ed529b62f3 Fix threading issue with GUI. #1443 #1444 2013-09-19 16:00:47 +02:00
Alessandro Ranellucci
afdb490cf1 Fix STL export. #1448 2013-09-19 12:25:00 +02:00
Alessandro Ranellucci
032698fb07 Test that toolchanges happen outside skirt when standby-temperature is enabled 2013-09-19 10:44:29 +02:00
Alessandro Ranellucci
40fd7418cd Added test for standby_temperature 2013-09-19 01:29:34 +02:00
Alessandro Ranellucci
0dd3ab0662 Don't block while cooling extruder 2013-09-18 20:05:15 +02:00
Alessandro Ranellucci
0062c3b7fc Almost finished the implementation of --standby-temperature 2013-09-18 20:03:59 +02:00
Alessandro Ranellucci
9caf536aca Finished a basic implementation of --standby-temperature 2013-09-18 18:49:19 +02:00
Alessandro Ranellucci
991bc8ae3d Partial work for implementing a standby temperature option 2013-09-18 17:45:02 +02:00
Alessandro Ranellucci
4fe0675380 Removed ZTable code 2013-09-17 23:55:38 +02:00
Alessandro Ranellucci
a7989e382c Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375 2013-09-17 23:51:30 +02:00
Alessandro Ranellucci
e0da81e8bf Introduce a ->count method for all collections to save time 2013-09-17 23:38:23 +02:00
Alessandro Ranellucci
e8323fc339 Move support material code to its own class 2013-09-17 23:27:57 +02:00
Alessandro Ranellucci
6adce9f66b Update support material code to use shared memory 2013-09-17 23:14:49 +02:00
Alessandro Ranellucci
bbbdae3952 Better name for "Detect overhangs" 2013-09-17 21:49:13 +02:00
Alessandro Ranellucci
ea0e136b45 Prevent superfluous extra perimeters added when a region has an acute angle 2013-09-17 20:18:54 +02:00
Alessandro Ranellucci
06fc1d1044 Fix minor bug causing some gaps to be infilled twice 2013-09-17 19:39:22 +02:00
Alessandro Ranellucci
f79ba8cec0 Update dump-stl.pl 2013-09-17 19:25:10 +02:00
Alessandro Ranellucci
39449f9245 Revert a recent change made to shells generation, causing too much solid infill. Includes regression test. #1431 2013-09-17 19:24:16 +02:00
Alessandro Ranellucci
2c1274e2d9 Updated/fixed SectionCut 2013-09-17 14:16:29 +02:00
Alessandro Ranellucci
7bd2ce21ca Fix wrong bridge flow used for overhangs and bridge perimeters. Includes regression test. #1407 2013-09-17 10:37:01 +02:00
Alessandro Ranellucci
d13e7b264a New experimental medial axis code (suboptimal but looks good) 2013-09-17 10:37:01 +02:00
Alessandro Ranellucci
78167f56ee Some cleanup for the Voronoi code 2013-09-17 10:37:01 +02:00
Alessandro Ranellucci
a88ce0cb5e Fix regression in start perimeters at non-overhangs. #1442 2013-09-17 10:37:01 +02:00
Alessandro Ranellucci
9a51964e98 Clean medial axis code and gap fill 2013-09-17 10:37:01 +02:00
Alessandro Ranellucci
c7db2cb10f Prune tiny shells to avoid random extra internal solid infill. #1431 2013-09-16 12:36:04 +02:00
Alessandro Ranellucci
aef5c05c57 Update brim generation code. Includes regression test. #1440 2013-09-16 10:33:30 +02:00
Alessandro Ranellucci
5a9c163a2e Meaningful error when user wants to use 3D preview but didn't install the required modules. 2013-09-16 10:18:42 +02:00
Alessandro Ranellucci
7d09f17810 Reflect max_fan_speed in cooling textual description. #1439 2013-09-16 10:09:39 +02:00
Alessandro Ranellucci
1aa5dbafd3 Update AMF export code 2013-09-16 09:58:53 +02:00
Alessandro Ranellucci
e2cb40766b Fix two more Boost calls after xsdata merge. #1429 2013-09-12 11:16:11 +02:00
Alessandro Ranellucci
5f54d0eb90 Fix concentric infill and add regression test. #1432 2013-09-12 11:14:54 +02:00
Alessandro Ranellucci
747fd25f6d Fix threads, tests and require the most recent Moo version 2013-09-12 11:09:03 +02:00
Alessandro Ranellucci
bc48e17dff Use precomputed normals in 3D preview 2013-09-11 20:15:42 +02:00
Alessandro Ranellucci
d4512a12df Make plater work with new XS code 2013-09-11 20:00:51 +02:00
Alessandro Ranellucci
4c96a52012 Read OBJ and AMF 2013-09-11 14:46:38 +02:00
Alessandro Ranellucci
a821eb7f3c More work to avoid working with vertices outside XS 2013-09-11 11:55:08 +02:00
Alessandro Ranellucci
11e18f681d Incomplete work to store TriangleMesh objects in Model objects instead of extracting vertices and facets 2013-09-11 09:49:28 +02:00
Alessandro Ranellucci
78ee6e5d6d Calls to ->repair where needed 2013-09-10 19:25:53 +02:00
Alessandro Ranellucci
566d38a472 Replace TriangleMesh with the XS port 2013-09-10 00:40:46 +02:00
Alessandro Ranellucci
5e34a9cf21 Make Repair() idempotent and lowercase 2013-09-09 23:18:33 +02:00
Alessandro Ranellucci
1b9d2e2ef8 Use the XS slicing code 2013-09-09 18:21:10 +02:00
Alessandro Ranellucci
873762491b Fix a bad access after recent change about ->p returning objects by reference 2013-09-09 17:10:54 +02:00
Alessandro Ranellucci
5adb187dd2 More porting work 2013-09-07 21:08:53 +02:00
Alessandro Ranellucci
8607c559c7 Minor tidying 2013-09-07 00:42:56 +02:00
Alessandro Ranellucci
09684c67c2 Optimization: Remove useless calls to union() 2013-09-07 00:28:53 +02:00
Alessandro Ranellucci
10ab3bbb86 Fix Only infill where needed putting insufficient material. #1412 2013-09-07 00:02:58 +02:00
Alessandro Ranellucci
907ba55aab Some minor fixes needed after the xsdata merge. #1421 2013-09-06 22:52:56 +02:00
Alessandro Ranellucci
f104659020 Optimization 2013-09-06 19:21:38 +02:00
Alessandro Ranellucci
4dd12b57a1 Fixed wipe (includes regression test). #1421 2013-09-06 19:14:06 +02:00
Alessandro Ranellucci
e02ae0d18a Return Surface objects by reference from SurfaceCollection objects and fix a bug in XS code causing some shell options to be ignored 2013-09-06 18:36:38 +02:00
Alessandro Ranellucci
cb677c45de Don't grow horizontal shells having acute angles. #1387 2013-09-06 17:43:40 +02:00
Alessandro Ranellucci
9484c377d9 Removed debugging line 2013-09-06 16:46:28 +02:00
Alessandro Ranellucci
a2cc54c9d0 Merge pull request #1424 from 4ZM/master 
Changes to make slic3r build on Arch
 2013-09-06 07:43:46 -07:00
Alessandro Ranellucci
2d3dae621a Minor typos preventing correct positioning after recent XS merge 2013-09-05 14:23:31 +02:00
Anders Sundman
73878e0218 The 'use' prevented the build. 
There is probably a reason for this line though.
 2013-09-04 22:45:19 +02:00
Alessandro Ranellucci
67aefdccc7 Fixed --avoid-crossing-perimeters and --support-material after the xsdata merge 2013-09-04 00:10:53 +02:00
Alessandro Ranellucci
a49dc603cc Many changes and fixes to remove leaks and return objects by reference 2013-09-03 19:26:58 +02:00
Alessandro Ranellucci
275422fac7 Don't return first_point() and last_point() by reference 2013-09-02 22:33:03 +02:00
Alessandro Ranellucci
0ffb0f6a58 Fix tests 2013-09-02 22:10:52 +02:00
Alessandro Ranellucci
c0789506e4 Return objects by reference instead of always cloning 2013-09-02 20:22:20 +02:00
Alessandro Ranellucci
1cfdf7e955 Ported Slic3r::Polyline::Collection 2013-08-30 00:06:10 +02:00
Alessandro Ranellucci
fb82de9aaf Removed more unused code 2013-08-29 11:52:25 +02:00
Alessandro Ranellucci
649ef6ce79 Removed unused code 2013-08-29 11:48:58 +02:00
Alessandro Ranellucci
bd7b0e2aed Ported ExtrusionPath::Collection->chained_path 2013-08-29 11:47:59 +02:00
Alessandro Ranellucci
ea1d138c95 Ported ExtrusionLoop->make_counter_clockwise() 2013-08-29 01:40:42 +02:00
Alessandro Ranellucci
5d6fd7f4d9 Optimizations for better usage of XS code 2013-08-29 01:36:42 +02:00
Alessandro Ranellucci
9254ff9704 Typo in merge 2013-08-28 20:43:23 +02:00
Alessandro Ranellucci
e19c6a1494 Ported Point->distance_to() and Line->length() 2013-08-28 20:41:41 +02:00
Alessandro Ranellucci
c9f68ed28a Refactor E code and keep track of per-extruder consumend filament 2013-08-28 20:40:13 +02:00
Alessandro Ranellucci
70d824c9a7 One minor optimization in GCode.pm 2013-08-28 20:40:13 +02:00
Alessandro Ranellucci
5f17fa342b Move arc fitting code to its own post-processing filter and remove the built-in ExtrusionPath::Arc class 2013-08-28 20:40:13 +02:00
Alessandro Ranellucci
055273fbc8 Huge speed boost by reducing the number of method calls in GCode.pm 2013-08-28 20:38:22 +02:00
Alessandro Ranellucci
73c05a6092 Moved vibration limit to its own G-code filter 2013-08-28 20:37:56 +02:00
Alessandro Ranellucci
fb763b0187 Removed dependency on Math::Clipper 2013-08-27 01:26:44 +02:00
Alessandro Ranellucci
b11b595c97 Ported nearest_point() and nearest_point_index() 2013-08-27 00:52:20 +02:00
Alessandro Ranellucci
f1e9216c70 Save some time in GCode.pm method calls 2013-08-27 00:02:24 +02:00
Alessandro Ranellucci
9fb14f2119 Ported (and used) ExtrusionPath->first_point 2013-08-26 23:42:00 +02:00
Alessandro Ranellucci
fe42427a54 Ported Polygon->is_valid() and ExPolygon->is_valid() 2013-08-26 23:27:51 +02:00
Alessandro Ranellucci
da0b85c0d9 Ported ExPolygon->contour and ExPolygon->holes 2013-08-26 23:09:18 +02:00
Alessandro Ranellucci
85011dfef3 Ported Surface->p 2013-08-26 23:03:00 +02:00
Alessandro Ranellucci
494ed5c5ad Minor optimization (group offset_ex calls) 2013-08-26 22:54:06 +02:00
Alessandro Ranellucci
706851f836 Ported ExPolygon->area() 2013-08-26 22:50:26 +02:00
Alessandro Ranellucci
792fcba7be Ported Polygon->area 2013-08-26 22:44:40 +02:00
Alessandro Ranellucci
1f734807b9 Ported Polygon->split_at() 2013-08-26 22:39:35 +02:00
Alessandro Ranellucci
9cf831b9c5 Ported union_pt() to XS 2013-08-26 18:37:19 +02:00
Alessandro Ranellucci
443d4e52cb Fixed everything in the XS port 2013-08-26 17:58:37 +02:00
Alessandro Ranellucci
49040db9a3 Fixes to pass all tests 2013-08-26 16:25:42 +02:00
Alessandro Ranellucci
d786dd6c1c Merge branch 'master' into xsdata 2013-08-25 22:34:03 +02:00
Alessandro Ranellucci
4bf08cbdec Minor fix (still no thumbnail) 2013-08-25 22:33:50 +02:00
Alessandro Ranellucci
94a7d6b941 Validate config before launching the object settings dialog 2013-08-25 22:24:43 +02:00
Alessandro Ranellucci
fc9cec9d81 Merge branch 'master' into xsdata 
Conflicts:
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print/Object.pm
 2013-08-25 19:59:42 +02:00
Alessandro Ranellucci
026e0c06e4 Ability to customize how materials are mapped to extruders. #1020 2013-08-25 19:52:32 +02:00
Alessandro Ranellucci
cb0ee9729f A couple fixes for Windows 2013-08-25 18:08:56 +02:00
Alessandro Ranellucci
ae9f13ed54 Minor fix to font size 2013-08-25 18:04:45 +02:00
Alessandro Ranellucci
ae21a45886 Distinct dialogs for 3D preview and object settings 2013-08-25 18:03:26 +02:00
Alessandro Ranellucci
b55d4a4e4b Merge branch 'master' into plater2 2013-08-25 17:52:21 +02:00
Alessandro Ranellucci
e96d7b1d6a Show facets, materials and manifoldness in info panel 2013-08-25 17:26:55 +02:00
Alessandro Ranellucci
fde6e371a9 Use multiple colors for multimaterial models in 3D preview 2013-08-25 16:35:21 +02:00
Alessandro Ranellucci
5b734f4a13 Merge branch 'master' into plater2 
Conflicts:
	lib/Slic3r/GUI/Plater.pm
 2013-08-25 16:10:53 +02:00
Alessandro Ranellucci
2fb725405f GUI fixes for Windows 2013-08-25 15:45:22 +02:00
Alessandro Ranellucci
3d6fb1b05c New feature: ability to override specific settings for individual objects in the plater. #344 2013-08-25 14:37:50 +02:00
Alessandro Ranellucci
87b54ba2a0 Plater rearrange experiment 2013-08-25 12:22:05 +02:00
Alessandro Ranellucci
2dd6325bf8 Expose an Open button in the plater 2013-08-25 03:21:20 +02:00
Alessandro Ranellucci
945250c8c2 Show axes and ground 2013-08-25 02:58:50 +02:00
Alessandro Ranellucci
6f1fd51c2e Keep objects vertical in 3D preview 2013-08-25 02:07:51 +02:00
Alessandro Ranellucci
097912755b Fix handling of dirty models with overlapping facets, where some holes became filled because of wrong slice nesting 2013-08-19 16:53:54 +02:00
Alessandro Ranellucci
da1b6117df Minor fix in debug code 2013-08-19 12:16:19 +02:00
Alessandro Ranellucci
94ca28644e Ported union() to XS 2013-08-17 12:24:04 +02:00
Alessandro Ranellucci
fa07c512b4 Merge branch 'master' into xsdata 
Conflicts:
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
 2013-08-16 09:09:56 +02:00
Alessandro Ranellucci
314f377d7b Debugging code 2013-08-13 20:17:17 +02:00
Alessandro Ranellucci
ef8ce1b5ba Improvements to SVG debug tools: honor input order and support all colours 2013-08-13 10:34:49 +02:00
Alessandro Ranellucci
2b36778dc1 Fix a situation where extra perimeters prevented top shell to be fully propagated. #1387 2013-08-13 09:45:33 +02:00
Alessandro Ranellucci
36596bf569 Bugfix: alignment code for rectilinear infill caused lack of infill (regression in 948b43f). #1387 2013-08-12 20:27:25 +02:00
Alessandro Ranellucci
f1922ce7b3 Fix regression causing lack of contact infill 2013-08-12 19:19:22 +02:00
Alessandro Ranellucci
e5fe04ea7a Make sure teeth are not too tight 2013-08-12 19:10:40 +02:00
Alessandro Ranellucci
9513fa7600 Enforce some horizontal margin between object and interface/support (contact not affected) 2013-08-12 18:55:11 +02:00
Alessandro Ranellucci
ca7d4163d7 Remove jitter and overlaps in interface infill 2013-08-12 18:45:03 +02:00
Alessandro Ranellucci
7062d028d2 Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions 2013-08-12 18:12:53 +02:00
Alessandro Ranellucci
8d413eda44 Refactoring: generate interface and support in different cycles 2013-08-11 19:25:51 +02:00
Alessandro Ranellucci
5f07d39509 Reapply perimeter only to support 2013-08-10 21:30:50 +02:00
Alessandro Ranellucci
5380b6cb33 Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly 2013-08-10 19:39:35 +02:00
Alessandro Ranellucci
abb5d1256f Added some debugging code 2013-08-09 21:27:57 +02:00
Alessandro Ranellucci
4862d832b5 Simplify layer change code now that we have distinct support layers 2013-08-09 19:46:20 +02:00
Alessandro Ranellucci
548b301432 Offset projection of facets before the final union 2013-08-09 16:34:55 +02:00
Alessandro Ranellucci
b956faa153 Adapt avoid_crossing_perimeters code to the recent changes 2013-08-09 16:30:40 +02:00
Alessandro Ranellucci
3751e3813c Fix regression causing too much collapsing of infill regions 2013-08-09 16:18:21 +02:00
Alessandro Ranellucci
5d80c26b29 Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic 2013-08-09 15:04:14 +02:00
Alessandro Ranellucci
67f5b7ab14 Require --default-acceleration when other acceleration settings are used 2013-08-09 14:33:20 +02:00
Alessandro Ranellucci
99816e07a6 New --first-layer-acceleration option 2013-08-09 14:30:43 +02:00
Alessandro Ranellucci
cde662cb51 Fix collision detection for brim 2013-08-09 14:22:41 +02:00
Alessandro Ranellucci
3427b29a93 Fix wrong slices when many overlapping facets were present in the model 2013-08-08 16:27:41 +02:00
Alessandro Ranellucci
f6569cf359 Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371 2013-08-08 14:41:23 +02:00
Alessandro Ranellucci
b38cc2c244 Merge branch 'master' into xsdata 
Conflicts:
	lib/Slic3r.pm
	lib/Slic3r/ExPolygon.pm
	lib/Slic3r/Fill.pm
	lib/Slic3r/Fill/Rectilinear.pm
	lib/Slic3r/GCode.pm
	lib/Slic3r/GUI/Plater.pm
	lib/Slic3r/Geometry/Clipper.pm
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
	lib/Slic3r/TriangleMesh.pm
	t/shells.t
	xs/MANIFEST
 2013-08-08 02:10:34 +02:00
Alessandro Ranellucci
4438aec12c Revert "Remove thumbnail simplification because it caused loss of very thin parts. #1327" 
This reverts commit 1210b89893.

Conflicts:

	lib/Slic3r/GUI/Plater.pm
 2013-08-05 20:48:09 +02:00
Alessandro Ranellucci
0ce7ebc4b8 Integerize plater thumbnails 2013-08-05 20:21:08 +02:00
Alessandro Ranellucci
d8e2cde962 Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366 2013-07-31 23:44:17 +02:00
Alessandro Ranellucci
528595c7f7 Automatically ignore per-role extruders if they're not configured in Printer Settings (only in GUI expert mode) - CLI mode continues to autogenerate extruder settings. #1236 2013-07-31 20:43:19 +02:00
Alessandro Ranellucci
d83b14655a Better tooltip for raft layers 2013-07-31 20:02:24 +02:00
Alessandro Ranellucci
6ddeb2fa07 Initialize support material interface extruder explicitely. #1364 2013-07-31 19:52:25 +02:00
Alessandro Ranellucci
415a2d165a Cleaner code for first layer temperatures 2013-07-31 18:55:23 +02:00
Alessandro Ranellucci
60e5e2166a Include support contact layers in skirt/brim generation 2013-07-31 16:29:44 +02:00
Alessandro Ranellucci
3b47e1a492 New --info option to show file info (size, volume, repair stats). Removed utils/file_info.pl 2013-07-31 15:10:11 +02:00
Alessandro Ranellucci
1b4878f305 Fix hang in new support material caused by numerical approximation leaving small polygons, as usual 2013-07-30 15:44:08 +02:00
Alessandro Ranellucci
4e13d61aed Fix retraction/Z/lift problems after recent changes 2013-07-30 12:15:40 +02:00
Alessandro Ranellucci
913f401280 Merge new-support2 2013-07-29 20:50:26 +02:00
Alessandro Ranellucci
a2cc230bb5 Add note about a bug caused by the disabled optimization about splitting meshes before avoid_crossing_perimeters. #1315 2013-07-29 19:50:47 +02:00
Alessandro Ranellucci
10a8f479f9 Bugfix: lift was not working correctly with multiple extruders and multiple skirt layers. Also, we now ignore all lift settings except the one of the first extruder. Includes regression tests. #1332 #1338 2013-07-29 19:43:57 +02:00
Alessandro Ranellucci
b5907dc734 Bugfix: z_offset was not applied in spiral_vase. Includes regression test #1343 2013-07-29 17:28:30 +02:00
Alessandro Ranellucci
1210b89893 Remove thumbnail simplification because it caused loss of very thin parts. #1327 2013-07-29 16:43:48 +02:00
Alessandro Ranellucci
dc766f9f73 Bugfix: the tangent edge removal algorithm was refactored the wrong way and wasn't used anymore 2013-07-29 14:56:37 +02:00
Alessandro Ranellucci
8fe38d9b71 Bugfix: fatal error when failed loops were included in slices. #1358 2013-07-29 14:17:36 +02:00
Alessandro Ranellucci
9adac636b8 Avoid G92 E0 with sailfish. #1034 2013-07-29 14:17:30 +02:00
Alessandro Ranellucci
80676f358a Keep edge lines in rectilinear infill even when the sides are not perfectly straight 2013-07-29 13:36:22 +02:00
Alessandro Ranellucci
2a2d15e422 Fix error after recent change about bridges 2013-07-29 12:15:30 +02:00
Alessandro Ranellucci
1f36406a62 Bugfix: thin bridge anchors were ignored. #304 2013-07-29 11:54:32 +02:00
Alessandro Ranellucci
948b43fe0d Don't try to align rectilinear infill if solid, otherwise there will be a gap at one side 2013-07-29 11:05:04 +02:00
Alessandro Ranellucci
51de3ce14f Switch print_z to unscaled coordinates 2013-07-29 00:27:53 +02:00
Alessandro Ranellucci
3bcb2f04ed Add spiral vase test for hollow models 2013-07-28 15:02:03 +02:00
Alessandro Ranellucci
91cade7e8f Make sure there are no gaps in spiral vase. Includes regression test. #1251 2013-07-28 13:39:15 +02:00
Alessandro Ranellucci
691c45d57f Smarter handling of hollow prints. Optimization included 2013-07-28 10:56:41 +02:00
Alessandro Ranellucci
25af3eb35f Proper fix for preventing shells to propagate too much 2013-07-27 19:41:36 +02:00
Alessandro Ranellucci
6bd4803612 Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that 2013-07-26 20:17:33 +02:00
Alessandro Ranellucci
0a8872ca6c Extend utils/dump-stl.pl to also write STL files 2013-07-26 19:25:15 +02:00
Alessandro Ranellucci
debe540018 Better name for wipe 2013-07-26 16:23:43 +02:00
Alessandro Ranellucci
aa194c8125 Fix little regression causing object height not to be updated when object in plater was scaled 2013-07-26 14:30:00 +02:00
Alessandro Ranellucci
c1c1416838 Scale layer height ranges too when scaling object in plater. #1284 2013-07-26 14:26:59 +02:00
Alessandro Ranellucci
a145f1b6aa Don't merge adjacent bridges so that more correct angles can be detected for each one 2013-07-26 12:31:44 +02:00
Alessandro Ranellucci
c69edf27e9 Bugfix: only_retract_when_crossing_perimeters was not triggering retraction when moving between islands that are covered/bridged on the above layer. #1308 2013-07-26 10:52:22 +02:00
Alessandro Ranellucci
37bf0fa53b Bugfix: medial axis thin wall detection was triggered when not needed 2013-07-26 00:13:24 +02:00
Alessandro Ranellucci
8fe228fcee Smarter ordering of gap fill 2013-07-26 00:03:28 +02:00
Alessandro Ranellucci
2b8662cf0c Temporary workarond for an upstream bug in Moo which causes failure when running with threads. #1330 2013-07-24 10:06:02 +02:00
Alessandro Ranellucci
7ad291ea64 Add ZTable to thread_cleanup() 2013-07-23 23:20:18 +02:00
Alessandro Ranellucci
aa2ad3bbd2 Fix garbage collection of shared data. #1348 2013-07-23 23:18:22 +02:00
Alessandro Ranellucci
b1147861dd Implement lower_bound() and upper_bound() methods for ZTable 2013-07-20 21:19:59 +02:00
Alessandro Ranellucci
e29aca3553 Reapply correct optimization for simplifiying fill_surfaces before performing the offset. #1325 2013-07-20 12:22:41 +02:00
Alessandro Ranellucci
1b285f3f46 Thread-safe integration of ExtrusionPath::Collection 2013-07-18 22:29:12 +02:00
Alessandro Ranellucci
c030e38908 Ported ExtrusionPath::Collection 2013-07-18 19:09:07 +02:00
Alessandro Ranellucci
0efea9e442 Ported diff() and intersection() 2013-07-17 01:21:30 +02:00
Alessandro Ranellucci
c7b6818ccf Ported offset() and offset2() 2013-07-17 00:48:29 +02:00
Alessandro Ranellucci
bf8c799685 Ported diff_ex, intersection_ex, union_ex, xor_ex 2013-07-17 00:29:09 +02:00
Alessandro Ranellucci
f7ada2b5db Ported make_clockwise() and make_counter_clockwise() 2013-07-16 21:09:29 +02:00