3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
14,786 Commits 1 Branch 1 Tag 249 MiB
26755eb1d1
Commit Graph

14786 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
rtyr
006630299b
Fixed predator output filaname format, infill overlap 2020-11-09 11:44:00 +01:00
rtyr
f33f55646c
Bumped up version to 0.0.4 2020-11-09 11:43:02 +01:00
rtyr
71593a487f
Merge pull request #5104 from Tillverka3d/master 
Fix predator output filaname format, infill overlap, and retraction length
 2020-11-09 11:39:39 +01:00
rtyr
8f07c5b5cc
Merge pull request #5110 from pmjdebruijn/creality_filament_3 
Creality Filament 3
 2020-11-09 10:44:15 +01:00
enricoturri1966
479d4b70f2 GCode Viewer - Show print/printer/filament settings names in legend 2020-11-09 08:41:14 +01:00
Pascal de Bruijn
72bcd29bc7 creality.ini: add filament_colour per vendor 
this essentially associates filament_colour with a vendor

the colour codes were taking from each of the vendors websites
 2020-11-08 19:36:36 +01:00
Pascal de Bruijn
3b63b0eca0 creality.ini: lower Creality PLA temp 
Based on test-dog.gcode on the SD card included with the Enter 3 Pro

M190 S50.000000
M109 S200.000000

I also did a temperature tower test with the sample filament spool included
with my Ender 3 Pro, which I still hadn't opened.

And at all temps 190-215C I've seen fairly poor bridging, with 190C being the
least worst. I still have to test, but it'll likely perform well at 185C.

The semitranslucent white PLA included with my Ender 3 Pro, probably has a
matting agent in it, which explains why it's very flowy, and very similar
in performance to another Matte PLA filament I have, which also exhibits
poor bridging at even moderate temperatures.

For the time being, let's stick with Creality's own sample settings.
 2020-11-08 19:17:24 +01:00
Pascal de Bruijn
1025e01a9d creality.ini: slightly raise temp for Generic PLA 2020-11-08 19:14:17 +01:00
Pascal de Bruijn
39c5a5cc12 creality.ini: Add AzureFilm PLA filament 
Based on temperature tower
 2020-11-08 19:13:12 +01:00
Nicolas North [norðurljósahviða]
f843e1034d
Revert retract_lenght for Predator until further testing 2020-11-08 17:07:42 +01:00
Nicolas North [norðurljósahviða]
3a0b0913e3
Fix retraction lenght for predator 2020-11-07 23:50:59 +01:00
Nicolas North [norðurljósahviða]
c518ec8abd
Fix predator output filaname format and infill overlap 2020-11-07 22:20:01 +01:00
Vojtech Bubnik
517477f0dd Fix of the previous Adaptive Cubic infill refactoring 
plus couple of fixes of the old logic.
 2020-11-06 16:24:15 +01:00
YuSanka
8448d1a1dc OSX specific : Set top border for the mode buttons, when settings pages has new layouts 
(when tabs bar is hidden)

+ Code cleaning for OG_CustomCtrl (delete unused input parameter from the draw_blinking_bmp())
 2020-11-06 16:24:03 +01:00
YuSanka
1492bc9cd5 Localization : Next phrases corrections and update for PrusaSlicer.pot 2020-11-06 12:14:19 +01:00
enricoturri1966
8f31f404a3 Disabled tech ENABLE_CTRL_M_ON_WINDOWS 2020-11-06 11:55:57 +01:00
enricoturri1966
277376ee09 Enabled tech ENABLE_CTRL_M_ON_WINDOWS to produce an experimental build 2020-11-06 11:42:54 +01:00
enricoturri1966
f1b5142daa Follow-up of 944e760722 -> Removed debug output line 2020-11-06 11:20:47 +01:00
enricoturri1966
41ef6cf15c Disabled tech ENABLE_CTRL_M_ON_WINDOWS 2020-11-06 11:09:47 +01:00
enricoturri1966
411159b5e7 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-11-06 11:03:56 +01:00
enricoturri1966
944e760722 #4892 - Follow-up of 30481e1ea8 -> Fixed behavior of imgui dialog for settings of 3DConnexion devices (CTRL+M) on Windows 2020-11-06 11:03:41 +01:00
rtyr
e01b3f4759
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. 2020-11-06 10:55:50 +01:00
rtyr
98b7ce405c
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. 
https://github.com/prusa3d/PrusaSlicer/pull/5092
 2020-11-06 10:54:34 +01:00
tamasmeszaros
2a98aa113c Remove unused RotoptimzeWindow imgui dialog. 
It might be added in the future in a more polished form.
 2020-11-06 10:06:05 +01:00
Vojtech Bubnik
139b58a6f2 Adaptive Cubic infill with anchors: Trimming anchors with not only 
with a neighbor T-joint line, but also with other crossing lines.
 2020-11-06 08:56:53 +01:00
YuSanka
a131217ada Added missed parent for the SysInfoDialog 
see f0a339758b
 2020-11-05 22:19:48 +01:00
YuSanka
ed2f03ec79 Localization: 
Some phrases are corrected in the code
The POT-file is updated
 2020-11-05 22:17:49 +01:00
YuSanka
f0a339758b Fixed a Dialog position under OSX 
Always set parent for the Dialog, if we want to see the Dialog in the same display as a parent.
Dialog will be shown in the primary monitor otherwise.

+ fixed a draw of the canvas legend when we move application between Retina and non-Retina displays
 2020-11-05 11:53:16 -08:00
David Kocik
95d808f7c4 Merge branch 'dk_filaments' into master 2020-11-05 17:44:21 +01:00
David Kocik
e9295e268a config wizard printer selection - changed vertical spacing 2020-11-05 17:43:40 +01:00
Vojtech Bubnik
239d588c5d 1) Implemented anchoring of infill lines to perimeters with length 
limited anchors, while before a full perimeter segment was always
   taken if possible.
2) Adapted the line infills (grid, stars, triangles, cubic) to 1).
   This also solves a long standing issue of these infills producing
   anchors for each sweep direction independently, thus possibly
   overlapping and overextruding, which was quite detrimental
   in narrow areas.
3) Refactored cubic adaptive infill anchroing algorithm
   for performance and clarity.
 2020-11-05 17:32:40 +01:00
enricoturri1966
8491872fb7 #5079 - Fixed GCode Viewer changing files modified date on Windows 2020-11-05 14:02:43 +01:00
enricoturri1966
6d56e60091 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-11-05 11:02:08 +01:00
enricoturri1966
aea09b8347 #5072 - Added color icon into 'Print' items in legend for gcode color print visualization 2020-11-05 11:01:54 +01:00
enricoturri1966
2ec5a0d46c Fixed visualization of gcode toolpaths for spiral vase mode 2020-11-05 11:00:04 +01:00
rtyr
3da92257d2
Anycubic 0.0.3 2020-11-05 10:42:08 +01:00
rtyr
94c54d0538
Bumped up version to 0.0.3 2020-11-05 10:40:35 +01:00
rtyr
8f2812dd3b
Merge pull request #5086 from Tillverka3d/master 
fix infill_overlap, start_gcode, end_gcode for anycubic predator
 2020-11-05 10:39:28 +01:00
Nicolas North [norðurljósahviða]
69fd5c1074
fix infill_overlap, start_gcode, end_gcode for anycubic predator 2020-11-05 03:24:51 +01:00
YuSanka
ea5fdcd7b1 Removed cog icon from the horizontal slider. 
+ Shortcut "Shift+G" works from the Preview canvas now (not just from the focused slider as before)
 2020-11-04 07:30:33 -08:00
Lukas Matena
ece27dcc42 Bumped up version number 2020-11-04 15:45:37 +01:00
David Kocik
5d16c5f466 imgui README.md updated 2020-11-04 13:48:30 +01:00
enricoturri1966
747fcb1d07 Follow-up of d2e5be89e3 -> Fixed processing of color print, pause print and custom gcode tags 2020-11-04 13:33:27 +01:00
YuSanka
11ee0cc2cc Hot-fix for my last commit (d576c029bd) 2020-11-04 13:14:57 +01:00
Lukas Matena
ab6af3ff68 Fix of #5058 (failing build with wx3.0) 2020-11-04 11:58:45 +01:00
YuSanka
d576c029bd CustomCtrl : fixed correction of the CustomCtrl's line height in respect to the height of the inside controls (fields or widgets) 
Issue was appeared on the Ubuntu 20.04
 2020-11-04 10:17:32 +01:00
David Kocik
3ca3a544a8 New Export Finished notification showing path and opening containing folder. Fix of #4917. Fixed wrongly grayed eject button in File menu. Hopefully fix of ctrl shortcut of tooltips at sidebar. 2020-11-04 09:29:08 +01:00
rtyr
729304c129
Creality - Prusament PLA temp adjust 2020-11-03 22:15:39 +01:00
rtyr
f623aaa07e
Merge pull request #5070 from pmjdebruijn/creality_filament_2 
Creality filament 2
 2020-11-03 22:09:43 +01:00
Pascal de Bruijn
893475d7ed creality.ini: fix first_layer_bed_temperature for Generic PLA 2020-11-03 19:39:45 +01:00