Lukas Matena
2ac964a676
XL specific temporary:
...
- only enable the temp backtracking for XL
- hardcode toolchange time to 4.5s
2023-03-31 16:39:46 +02:00
Lukas Matena
211b8cdc90
Added a marker for the ooze prevention cooldown commands
2023-03-31 16:37:52 +02:00
enricoturri1966
943eb5b4fe
Modified gcode postprocessor to remove gcode lines while backtracing from the current position
2023-03-31 16:37:52 +02:00
Lukas Matena
97397ba6cb
Increased the backtracing time to 120 s
2023-03-31 16:37:52 +02:00
Lukas Matena
86f2142325
Change the notification from M117 to M104
2023-03-31 16:37:52 +02:00
enricoturri1966
64b3e0d6a9
Fixed method GCodeLine::extract_cmd()
2023-03-31 16:37:52 +02:00
Lukas Matena
57e1f3d4db
Backtracing updates:
...
- always enable the feature
- read the tool that we change to
- get temperature for that tool (from config at this point)
- replace the dummy XYYY gcode by M117 (print to display)
showing the tool, time to toolchange and required temp
2023-03-31 16:37:52 +02:00
enricoturri1966
c9724ae6fd
Modify gcode post-process to allow to insert new gcode lines by backtracing from the current processed line.
...
Current state is a prototype and the new code is embedded into a new tech: ENABLE_GCODE_POSTPROCESS_BACKTRACE
2023-03-31 16:37:52 +02:00
enricoturri1966
80e0666401
Merge remote-tracking branch 'origin/et_transformations'
2023-03-31 16:12:39 +02:00
enricoturri1966
3c8ecf5bd6
Merge branch 'master' of https://github.com/Prusa-Development/PrusaSlicerPrivate into et_transformations
2023-03-31 16:10:36 +02:00
David Kocik
e1c253b29e
fix of obsolete text
2023-03-31 15:42:13 +02:00
YuSanka
41026d47b6
EmbossGizmo: Fixed some phrases to improve localization
2023-03-31 14:31:22 +02:00
Filip Sykala - NTB T15p
4cf8d671cb
Change imgui dialog in emboss to wxWidget dialog for better styling.
2023-03-31 13:36:35 +02:00
David Kocik
dee0aa6f90
Merge branch 'dk_alt_eject'
2023-03-31 13:11:38 +02:00
David Kocik
6be2aa29dc
Alternative eject function (IOCTL_STORAGE_EJECT_MEDIA)
...
Detect if device has CARD READER configuration in Configuration Descriptor
log
2023-03-31 13:11:23 +02:00
tamasmeszaros
e1861d220c
Revert "Try to handle fff supports in arrange after slicing"
...
This reverts commit 92e0c13513
2023-03-31 12:24:14 +02:00
Filip Sykala - NTB T15p
d56f09a92a
Fix removing neighbor duplicit point between first and last point in polygon mentioned by @BubnikV
2023-03-31 09:48:14 +02:00
PavelMikus
d3037d325a
Minor improvement of the special case of extra perimeters path ordering
2023-03-30 16:57:44 +02:00
Lukas Matena
f95810bee4
Merge remote-tracking branch 'public/master'
2023-03-30 16:32:40 +02:00
PavelMikus
3a08097cd2
Improve performance of bridge over infill algorithm for very noisy/textured top surfaces
...
improve bridging direction unification when briding areas start overlapping
2023-03-30 16:23:03 +02:00
tamasmeszaros
47aacbdc5e
Merge branch 'tm_bugfix_SPE-1617'
2023-03-30 13:00:27 +02:00
Vojtech Bubnik
e4c479aba4
Added first layer print times to print statistics written at the end
...
of a G-code export.
; estimated first layer printing time (normal mode) = xxx
; estimated first layer printing time (silent mode) = yyy
2023-03-30 12:19:45 +02:00
Vojtech Bubnik
2b7cf2d877
GCodeGenerator / custom G-codes: Added new read/only options providing
...
the amount of total extruded material and per extruder extruded material
up to the point the value is evaluated:
"extruded_volume", "extruded_weight",
"extruded_volume_total", "extruded_weight_total"
2023-03-30 10:36:36 +02:00
kubispe1
ec4c153dcf
Update config.yml
...
Add customer support form
2023-03-30 10:24:18 +02:00
Lukáš Hejl
89b9f702d6
Fixed asserts and calculations in calculateExtrusionAreaDeviationError.
...
The previous method worked just for near collinear edges. But it was also used for sharp corners, and for those sharp corners, there was an overflow in the computation of weighted width.
Also, the computation of deviation error was wrong for those sharp corners.
2023-03-30 10:01:32 +02:00
enricoturri1966
91db979c8c
Show the reset button for skew only when the world matrix contains skew (so that the skewed object is visible in the 3D scene view)
2023-03-30 09:09:50 +02:00
enricoturri1966
6084a92d9b
Fixed conflicts after merge with master
2023-03-30 08:52:20 +02:00
Vojtech Bubnik
7a5639f322
Fixed crash if toolchange G-code modifies final position,
...
because the extruder was not set yet.
2023-03-29 17:53:23 +02:00
tamasmeszaros
cbd25227c4
More meaningful error message if slicing fails in SLA
2023-03-29 16:10:00 +02:00
Vojtech Bubnik
ab1813bdc8
PlaceholderParser: fixed access to "position" variable
...
Follow-up to 59552a8aee
2023-03-29 15:32:43 +02:00
Lukáš Hejl
9ed97abdb0
Fix of #10034 (SPE-1608): Fixed crash inside Arachne caused by degenerated Voronoi diagram.
...
Boost Voronoi diagram produced degenerated Voronoi diagram. This Voronoi diagram was detected by our method for detection of those types of degeneration. But rotation by PI / 6 wasn't able to fix it.
So now, when the Voronoi diagram is still degenerated after the first rotation, then we try another rotation by different angles to fix the degenerated Voronoi diagram.
2023-03-29 14:38:22 +02:00
YuSanka
eb2c121f94
Follow-up cc5660ad8c - Fixed tooltip texts
2023-03-29 14:20:31 +02:00
YuSanka
eefae26961
Merge remote-tracking branch 'origin/et_show_sla_supports' into master
2023-03-29 13:17:29 +02:00
YuSanka
dcf5889cfa
Fixed a save to 3mf: Added a check if cut information have to be saved to 3mf
2023-03-29 12:53:09 +02:00
rtyr
0ed47616f9
Added MK4 profiles.
2023-03-29 11:22:09 +02:00
tamasmeszaros
048e05af7e
Merge branch 'tm_arrange_skirt_brim_SPE-1465'
2023-03-29 11:06:19 +02:00
Filip Sykala - NTB T15p
6f9f7ad47a
change to constexpr
2023-03-29 10:57:48 +02:00
rtyr
f71ea4b615
MK4 resources
2023-03-29 10:54:03 +02:00
Vojtech Bubnik
eec51c67d3
Refactoring of PrintObject::discover_vertical_shells() for readability
...
and efficiency.
Also added an experiment of adding one more "ensuring" layer to support
top / bottom surfaces, disabled with one_more_layer_below_top_bottom_surfaces
2023-03-29 10:49:49 +02:00
Filip Sykala - NTB T15p
cc5660ad8c
Lock for rotation.
2023-03-29 10:45:11 +02:00
Pavel Mikus
c234b98db5
Fix additional special case for ordering of extra perimeters
2023-03-28 21:00:07 +02:00
Filip Sykala - NTB T15p
392dbba96f
Fix offsets for SLA Text dragging with visible supports.
2023-03-28 17:10:56 +02:00
YuSanka
0cb1c74ec2
Disabled font experiments
2023-03-28 16:47:31 +02:00
YuSanka
91f6530acf
ObjectList: Fixed selection, when object part is moving/rotating/scaling and "Sinking" info is appearing/disappearing.
...
+ Reverted "patch" commit e65ebccb7f
2023-03-28 16:47:31 +02:00
tamasmeszaros
f0949f30eb
Merge branch 'tm_export_stl_booleans_SPE-1540'
2023-03-28 16:34:08 +02:00
Filip Sykala - NTB T15p
56d15253d4
Fix update of model after finish text jobs.
2023-03-28 16:07:00 +02:00
tamasmeszaros
5a586b2b4e
Fix failed export message when cgal errors are detected on target meshes
2023-03-28 15:32:23 +02:00
tamasmeszaros
4e64e7e74f
Export boolean-ed models if possible to STL/obj files
2023-03-28 15:32:23 +02:00
David Kocik
e103f287ca
Merge branch 'dk_sla_put'
2023-03-28 14:18:36 +02:00
David Kocik
d798bc62ae
Sl1host inherits from prusalink
2023-03-28 14:07:34 +02:00
