rtyr
a1143ab26e
Creality and INAT update
2022-06-03 15:11:01 +02:00
Lukas Matena
5c616c5931
Sync to 2.4.1-beta1
2022-02-01 14:16:13 +01:00
Lukas Matena
ebb9041041
Merge branch 'master' into stable - no conflicts fixed
2022-02-01 14:15:18 +01:00
rtyr
7323851f66
Bumped up versioni to 0.0.13
2021-12-21 10:31:36 +01:00
Pascal de Bruijn
d05bf014eb
creality.ini: Ender-3 S1 improvements
...
It seems the firmware is setup to not have to run ABL for each print,
and thus Creality's example start_gcode does not include G29
Finetuning for the S1's Sprite Direct Drive extruder
2021-12-17 19:04:27 +01:00
rtyr
33351c4e5f
Bumped up version to 0.1.2 - Added Ender 3 S1
2021-12-16 12:02:32 +01:00
Pascal de Bruijn
37cfcadadd
creality.ini: add preliminary Ender-3 S1
2021-12-15 20:14:01 +01:00
Pascal de Bruijn
f5d4349016
creality.ini: slight improvements to Ender-2 Pro
...
Replace bed stl with something consistent with the rest
Replace bed svg with something simpler consistent with the rest
Add tiny safety margin
2021-12-15 20:03:45 +01:00
Pascal de Bruijn
c045a34fa0
creality.ini: always output layer heights with two decimals
2021-12-15 19:43:15 +01:00
rtyr
0255ff2fd6
Bumped up version to 0.1.1
2021-12-11 21:01:34 +01:00
Spencer Owen
93f62854b1
Add ender 2 pro
2021-12-04 13:34:29 -07:00
rtyr
fde3bce38c
Creality 0.1.0. Added Ender-7, Sermoon D1, CR-10 SMART
2021-06-28 19:08:20 +02:00
rtyr
e32cde8054
Creality - bumped up version to 0.1.0
2021-06-28 19:05:30 +02:00
Pascal de Bruijn
d737142f37
creality.ini: make print profiles inclusive of Sermoon printers
2021-06-28 18:02:00 +02:00
Pascal de Bruijn
43346a871c
creality.ini: beta support for Sermoon D1
2021-06-27 19:20:25 +02:00
Pascal de Bruijn
3cf1f568d0
creality.ini: beta support for Ender-7
2021-06-27 19:07:17 +02:00
Pascal de Bruijn
95c879cf00
creality.ini: beta support for CR-10 SMART
2021-06-27 18:51:41 +02:00
rtyr
32ec4aa652
Creality 0.0.17
...
Updated start g-code. Added specific start g-code for straingauge printers. Improved output filename format. Added filament profile.
2021-06-01 09:09:59 +02:00
rtyr
fdd5151a45
Version bumped to 0.0.17
2021-06-01 09:01:45 +02:00
Pascal de Bruijn
3abc0b84a4
creality.ini: straingauge start_gcode wait for bed temp to settle as well
...
given this applies to a larger bed printer as well (CR-6 Max).
2021-05-31 20:00:41 +02:00
Pascal de Bruijn
166790c49e
creality.ini: fix new placeholder syntax
2021-05-30 20:37:02 +02:00
Pascal de Bruijn
ddb556db66
creality.ini: internal start_gcode consistency improvements
2021-05-30 17:55:18 +02:00
Pascal de Bruijn
a934960c00
creality: special start_gcode for straingauge printers
2021-05-30 17:48:54 +02:00
Pascal de Bruijn
3a445c99fb
creality.ini: use 150C during ABL again
...
initially ABL temp was lowered to 120C for straingauge ABL (G29), but since
we're no longer doing ABL on each print for straingauge printers like the CR6
series, we can raise the temp a little again
2021-05-30 17:33:58 +02:00
rtyr
542f830c95
Creality 0.0.16, PR 1.2.5
2021-05-25 15:03:13 +02:00
Pascal de Bruijn
620985b29f
creality.ini: improve output_filename_format
...
this moves the print_time directly after the input_filename_base,
so it has the most chance of surviving truncation by marlin.
temperature is also added in front of the filament_type.
2021-05-04 18:41:06 +02:00
Pascal de Bruijn
6110d1ef05
creality.ini: Add Devil Design PLA Matt
2021-05-03 18:13:02 +02:00
rtyr
b71fa0d634
Bumped up version to 0.0.16
2021-04-20 20:35:49 +02:00
Pascal de Bruijn
2cb268c947
Revert "creality.ini: Extrudr NX2 slightly lower temps"
...
This reverts commit 41c56f2eb8
2021-04-20 18:13:21 +02:00
Pascal de Bruijn
d50c2872bd
creality.ini: disable explicit ABL for CR6-SE ( #6383 )
...
this is also better in line with Creality's intended behavior
2021-04-20 18:12:08 +02:00
Pascal de Bruijn
d33cffdd1e
creality.ini: remove parentheses for galaxy pla filament
...
since we've not using those for other filament subtypes
2021-04-16 19:32:32 +02:00
Pascal de Bruijn
2ffcf97be1
creality.ini: more accurate spool weights for Devil Design
...
I just noticed Devil Design uses identical spools to Extrudr NX-2
2021-04-16 19:30:33 +02:00
Pascal de Bruijn
10e914d9a9
creality.ini: add 3DJAKE ecoPLA Matt
...
the filament is very flowy, which means it prints well at lower temperatures.
and given the limited part cooling fan on most creality printers, it prints
less well at higher temperatures.
2021-04-14 18:00:09 +02:00
Pascal de Bruijn
d8f56ef5fd
creality.ini: add Devil Design approx spool weights
...
by manufacturer specifications:
https://devildesign.com/download/PLA_-_product_card.pdf
2021-04-14 17:59:55 +02:00
Pascal de Bruijn
41c56f2eb8
creality.ini: Extrudr NX2 slightly lower temps
...
After more practical testing, a slightly lower temp is beneficial on
small pointy areas, preventing them from being slightly deformed.
2021-04-13 19:09:54 +02:00
rtyr
f711c825e1
Updated Creality resources and profiles
2021-04-12 12:07:54 +02:00
rtyr
6121f1de3b
version bumped up to 0.0.15
2021-04-12 11:42:32 +02:00
Pascal de Bruijn
d09871441a
creality.ini: add Tough PLAs
2021-04-05 17:24:16 +02:00
Pascal de Bruijn
744311f3c3
creality.ini: improve bridging
2021-04-04 15:24:57 +02:00
Pascal de Bruijn
7eaadf0e47
Revert "creality.ini: move Ender-3 specific extruder_clearance"
...
Due to #589 .
This reverts commit 34202f71e5
2021-03-01 23:56:08 +01:00
Pascal de Bruijn
45cbac0b7c
creality.ini: unhide new printers (except CR-X)
2021-03-01 19:00:04 +01:00
Pascal de Bruijn
065a129d47
creality.ini: remove single_extruder_multi_material_priming from printer section
2021-03-01 18:43:40 +01:00
Pascal de Bruijn
7fbb3a2b42
creality.ini: Add CR-5 Pro H
...
this is a high temp variant of the regular CR-5 Pro, with the
suspected all metal hotend, presumably the non-H variant has
a teflon lined hotend
related: 2d762ec320
2021-03-01 18:40:33 +01:00
Pascal de Bruijn
586ed35e3a
creality.ini: fix CR-5 Pro bed_shape
2021-03-01 18:34:18 +01:00
Pascal de Bruijn
f5863cd5d8
creality.ini: CR-200B also has a descending z axis
2021-03-01 18:24:44 +01:00
Pascal de Bruijn
5e78b0f24f
creality.ini: remove ignored renamed_from from *descendingz*
...
fixes: Nonpublic intermediate preset *descendingz* contains a "renamed_from" field, which is ignored
2021-03-01 18:21:27 +01:00
Pascal de Bruijn
34202f71e5
creality.ini: move Ender-3 specific extruder_clearance
...
replace general extruder_clearance with higher values so there's
a lot of clearance leeway until we get exact figures for each
printer model.
related: f9b4bbb016
2021-02-28 17:10:25 +01:00
Pascal de Bruijn
90f58fe90a
creality.ini: CR-200B bed_shape and max_print_height
2021-02-28 17:06:24 +01:00
Pascal de Bruijn
e5b7b20be1
creality.ini: CR-5 Pro more accurate bed
2021-02-28 16:57:35 +01:00
Pascal de Bruijn
19ba6f1492
creality.ini: add CR-200B
2021-02-28 16:53:33 +01:00
