3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,942 Commits 1 Branch 1 Tag 249 MiB
2dd6325bf8
Commit Graph

161 Commits

Author SHA1 Message Date
Alessandro Ranellucci
2b36778dc1 Fix a situation where extra perimeters prevented top shell to be fully propagated. #1387 2013-08-13 09:45:33 +02:00
Alessandro Ranellucci
f1922ce7b3 Fix regression causing lack of contact infill 2013-08-12 19:19:22 +02:00
Alessandro Ranellucci
e5fe04ea7a Make sure teeth are not too tight 2013-08-12 19:10:40 +02:00
Alessandro Ranellucci
9513fa7600 Enforce some horizontal margin between object and interface/support (contact not affected) 2013-08-12 18:55:11 +02:00
Alessandro Ranellucci
ca7d4163d7 Remove jitter and overlaps in interface infill 2013-08-12 18:45:03 +02:00
Alessandro Ranellucci
7062d028d2 Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions 2013-08-12 18:12:53 +02:00
Alessandro Ranellucci
8d413eda44 Refactoring: generate interface and support in different cycles 2013-08-11 19:25:51 +02:00
Alessandro Ranellucci
5f07d39509 Reapply perimeter only to support 2013-08-10 21:30:50 +02:00
Alessandro Ranellucci
5380b6cb33 Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly 2013-08-10 19:39:35 +02:00
Alessandro Ranellucci
abb5d1256f Added some debugging code 2013-08-09 21:27:57 +02:00
Alessandro Ranellucci
5d80c26b29 Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic 2013-08-09 15:04:14 +02:00
Alessandro Ranellucci
f6569cf359 Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371 2013-08-08 14:41:23 +02:00
Alessandro Ranellucci
d8e2cde962 Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366 2013-07-31 23:44:17 +02:00
Alessandro Ranellucci
1b4878f305 Fix hang in new support material caused by numerical approximation leaving small polygons, as usual 2013-07-30 15:44:08 +02:00
Alessandro Ranellucci
913f401280 Merge new-support2 2013-07-29 20:50:26 +02:00
Alessandro Ranellucci
51de3ce14f Switch print_z to unscaled coordinates 2013-07-29 00:27:53 +02:00
Alessandro Ranellucci
691c45d57f Smarter handling of hollow prints. Optimization included 2013-07-28 10:56:41 +02:00
Alessandro Ranellucci
25af3eb35f Proper fix for preventing shells to propagate too much 2013-07-27 19:41:36 +02:00
Alessandro Ranellucci
6bd4803612 Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that 2013-07-26 20:17:33 +02:00
Alessandro Ranellucci
b1147861dd Implement lower_bound() and upper_bound() methods for ZTable 2013-07-20 21:19:59 +02:00
Alessandro Ranellucci
985af5ee56 Merge branch 'newslice' 2013-07-06 12:16:54 +02:00
Alessandro Ranellucci
86c4f5c5b0 Merge branch 'master' into newslice 2013-06-23 22:23:25 +02:00
Alessandro Ranellucci
de45b823e1 Merge branch 'master' into xs 2013-06-23 21:12:19 +02:00
Alessandro Ranellucci
2d687cd0a0 Only combine internal infill and leave internal-solid as it is. #1248 2013-06-23 18:21:47 +02:00
Alessandro Ranellucci
f3a9d41c70 Cache a Z table for layer range search 2013-06-23 17:07:12 +02:00
Alessandro Ranellucci
37105e8237 Ported get_layer_range() to C 2013-06-23 15:33:07 +02:00
Alessandro Ranellucci
9a904dc88d Lighter implementation of the slicing algorithm to save memory and time 2013-06-23 12:26:40 +02:00
Alessandro Ranellucci
1565560b55 One more little optimization 2013-06-22 20:37:15 +02:00
Alessandro Ranellucci
ac4a0bcdd8 Refactoring: use Slic3r::Geometry::BoundingBox objects everywhere 2013-06-16 12:21:25 +02:00
Alessandro Ranellucci
20158aac0d Merge branch 'issue1161' 2013-06-15 18:08:01 +02:00
Alessandro Ranellucci
878d17605c Ignore solid_infill_every_layers when fill_density is 0. Includes regression test. #1240 2013-06-14 16:48:24 +02:00
Alessandro Ranellucci
d5a9320587 Bugfix: narrow top surfaces didn't generate solid layers. #1161 2013-06-08 17:48:34 +02:00
Alessandro Ranellucci
3ffe98f0c3 Use actual Z to order objects in sequential printing rather than layer count, as layer heights might be different 2013-06-03 21:40:13 +02:00
Alessandro Ranellucci
7134df4638 Only skip objects with no layers without stopping the whole job 2013-06-03 11:39:23 +02:00
Alessandro Ranellucci
8a01cb9e96 Generate a better error when input file is too thin and no layers could be generated. #1127 2013-06-02 19:44:59 +02:00
Alessandro Ranellucci
c62b49d1af Optimization of extra perimeters detection 2013-05-31 14:30:07 +02:00
Alessandro Ranellucci
917915d68e Bugfix: superfluous extra perimeters were generated. #1170 2013-05-31 14:23:42 +02:00
Alessandro Ranellucci
bbb190dc68 Generate infill using each object's bounding_box instead of full print. #1177 2013-05-19 11:35:41 +02:00
Alessandro Ranellucci
08a0bbd7f0 Optimization: split meshes automatically when avoid_crossing_perimeters is enabled, so that we reduce the complexity of the MotionPlanner graphs. This commit includes a very large refactoring of the Model class which is now responsible for duplication and arrangement 2013-05-18 16:48:26 +02:00
Alessandro Ranellucci
c2301c5796 Don't extend solid layers when fill density is 0 2013-04-29 15:55:50 +02:00
Mark Hindess
407de02fe4 Use binary search for get_layer_range. 
Gives a 13% speed up on Teethy_Tiki.stl (thing:49334) with default settings
on my laptop.
When $self->layers->[0]->slice_z == $min_z the returned $min_layer value is
0 rather than the (incorrect?) -1 returned by the old code.
 2013-04-18 19:29:05 +01:00
Alessandro Ranellucci
e088d9b3f7 Cache Slic3r::Fill object 2013-04-18 18:40:59 +02:00
Alessandro Ranellucci
430c825918 Align rectilinear and line infill across layers (new implementation). #712 2013-04-18 17:34:21 +02:00
Alessandro Ranellucci
04d2231901 Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049 2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
1b79b1cb20 Refactoring: use the clone() method for inflating Surface objects 2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
6bc5de0b5d Allow custom ranges with layer_height = 0 2013-03-24 15:26:55 +01:00
Alessandro Ranellucci
0b81911cff Bugfix: artifacts near walls. #1049 2013-03-18 17:55:16 +01:00
Alessandro Ranellucci
8ce31c2a2b Don't exclude any infill under internal bridges; revert infill pattern to rectilinear for internal bridges. #240 2013-03-18 13:32:19 +01:00
Alessandro Ranellucci
1064c9bb2a Merge branch 'master' into grow-narrow 
Conflicts:
	lib/Slic3r/Fill.pm
	lib/Slic3r/Print/Object.pm
 2013-03-17 02:30:20 +01:00
Alessandro Ranellucci
83065b0789 Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value 2013-03-17 01:10:40 +01:00