3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,207 Commits 1 Branch 1 Tag 249 MiB
2e3110d2e4
Commit Graph

1207 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Henrik Brix Andersen
a72b914eb0 Add lib/Slic3r/GUI/ConfigWizard.pm to MANIFEST 2012-07-01 00:24:55 +02:00
Mark Hindess
07f2dab5f6 Fix perimeters_* options to be singular to be consistent. 2012-06-30 23:18:15 +01:00
Henrik Brix Andersen
bfe7108cea Provide instructions for loading an existing configuration instead of using the wizard 2012-07-01 00:17:48 +02:00
Henrik Brix Andersen
8f0aab3520 Restore old configuration if configuration wizrd is cancelled 2012-07-01 00:10:48 +02:00
Henrik Brix Andersen
bb193c659c Start configuration wizard from sane default settings 2012-06-30 23:56:11 +02:00
Henrik Brix Andersen
e656c30d4f Clean up imports 2012-06-30 23:30:52 +02:00
Henrik Brix Andersen
757da9d39d Clean up imports 2012-06-30 23:28:07 +02:00
Henrik Brix Andersen
d90e82faa3 Check for unsaved changes before running configuration wizard 2012-06-30 23:00:05 +02:00
Henrik Brix Andersen
df658eb636 Rename SkeinPanel::on_close() to make it more generice 2012-06-30 22:57:30 +02:00
Henrik Brix Andersen
a0f8078ee1 Warn on dirty default presets as well 2012-06-30 22:34:13 +02:00
Alessandro Ranellucci
cbb111ee64 Fix for incomplete commit causing thin gaps to throw an error 2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
b9008a99f9 Fill the gaps while doing normal infill to avoid extra travel 2012-06-30 16:33:01 +02:00
Alessandro Ranellucci
5eb1982081 Bugfix: brim was extruded multiple times when sequential printing was enabled 2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933 Revert "Reduce memory usage during gcode output by discarding processed layers." 
This reverts commit 4d1551c305.
 2012-06-30 16:12:06 +02:00
Alessandro Ranellucci
d5c9b74377 Allow scaling factor to be at least 2540 to allow the conversion of inch models 2012-06-29 20:46:51 +02:00
Mark Hindess
b4a21bea40 Fix for #499. 2012-06-29 17:02:37 +01:00
Mark Hindess
4d1551c305 Reduce memory usage during gcode output by discarding processed layers. 
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big.  So this removes
the list entry after it's been processed.
 2012-06-29 12:33:30 +01:00
Henrik Brix Andersen
d884856b2e Add information about the Silk icon set. 2012-06-28 23:47:31 +02:00
Henrik Brix Andersen
4f179a5197 Explicitly set top level window (to ensure the wizard is not assumed to be the top level window) 2012-06-28 23:20:10 +02:00
Mark Hindess
2e1649e6b5 Comment out code that builds @vertices_facets data structure. 
Saves memory and speeds up reading large models.
 2012-06-28 19:58:21 +01:00
Alessandro Ranellucci
fb96cdec76 Command line options to assign perimeters and infill to different extruders 2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
80501d5b3c New option to customize support material extrusion width 2012-06-28 16:33:07 +02:00
Alessandro Ranellucci
f9f2361acb Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture 2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66 Rename support_material_tool to support_material_extruder 2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
3e8bc73fcb Fix typo in previous commit 2012-06-28 14:49:20 +02:00
Alessandro Ranellucci
898266fd34 Initial refactoring for supporting multiple extruders. Little speed optimization included 2012-06-28 14:44:54 +02:00
Henrik Brix Andersen
ed9f6e1f1e Rephrase a few of the wizard instructions 2012-06-27 23:20:29 +02:00
Henrik Brix Andersen
84cfe7afc7 Automatically show configuration wizard on first run 2012-06-27 22:13:57 +02:00
Henrik Brix Andersen
7211561ab3 Change wizard welcome text a bit 2012-06-27 21:51:12 +02:00
Henrik Brix Andersen
145b9076cc Let the wizard automatically set first_layer_height = nozzle_diameter 2012-06-27 21:03:57 +02:00
Alessandro Ranellucci
92460ba902 Bugfix: the plater didn't remember last input file directory. #485 2012-06-27 20:27:46 +02:00
Henrik Brix Andersen
dbc42f6841 Make it more clear that the wizard uses your current configuration as basis 2012-06-27 19:56:47 +02:00
Alessandro Ranellucci
eea6d84314 Bugfix: infill extrusion width was ignored 2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
47a07a86ee Bugfix: GUI was unable to update flow settings 2012-06-27 19:49:53 +02:00
Alessandro Ranellucci
96a3234eaa Different speed for external perimeters. #488 2012-06-27 19:42:16 +02:00
Henrik Brix Andersen
52872753df Minor changes to text and layout to look more like other wizards 2012-06-27 19:41:37 +02:00
Mark Hindess
cc330932d6 Revert "Simple remote interface to slic3r using plack." 
This reverts commit a3af688173.
 2012-06-27 17:58:27 +01:00
Mark Hindess
a3af688173 Simple remote interface to slic3r using plack. 
Only supports a single stl model but supporting other file formats and
merge would be quite simple.  Speed might mean requests timeout if
slicing takes too long.  Just a proof-of-concept really but I might
use it to slice on my server from my laptop.
 2012-06-27 17:42:34 +01:00
Henrik Brix Andersen
cd48dc4031 - Add nozzle_diameter to Configuration Wizard 
- Automatically set layer_height to (nozzle_diameter - 0.1)
 2012-06-27 17:59:29 +02:00
Mark Hindess
a49827f5ab Revert "Fix license to match README." 
This reverts commit 7d858338fa.

At least xnaron's perl doesn't like 'agpl3'.
 2012-06-27 07:15:30 +01:00
Mark Hindess
840752194f Speed up encloses_point calls from medial_axis code. 
The points shouldn't be on hole borders so we can make the check
much quicker.  Gives over 50% speed up slicing reprap shot glass
(thing:11944) with default settings and 0.3 layer height.
 2012-06-26 23:11:46 +01:00
Henrik Brix Andersen
406e31a20d Fix icon file name 2012-06-26 22:47:58 +02:00
Henrik Brix Andersen
373b341280 Remove cooling option from wizard 2012-06-26 22:47:10 +02:00
Henrik Brix Andersen
de3347c825 Add initial configuration wizard 2012-06-26 17:42:29 +02:00
Mark Hindess
7d858338fa Fix license to match README. 2012-06-25 23:00:50 +01:00
Mark Hindess
1d3f7e0b1c Trivia: Remove duplicate word "speed". 2012-06-25 22:57:05 +01:00
Mark Hindess
a4de0e659d Trivial typo/grammar. 2012-06-25 22:51:20 +01:00
Alessandro Ranellucci
3a8f4015d6 Don't reset E when the makerbot flavor is selected 2012-06-24 21:05:44 +02:00
Alessandro Ranellucci
0938c73d08 Revert "Don't reset E when the makerbot flavor is selected" 
This reverts commit 2e5e5983be.
 2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be Don't reset E when the makerbot flavor is selected 2012-06-24 20:58:12 +02:00