bubnikv
bbdaa44acb
Const version of a PrintObject::get_region(). Made get_region() inline.
2017-01-05 09:11:36 +01:00
bubnikv
6582182e0c
Adapted to the new ClipperUtils.hpp interface by @alexrj
2016-12-13 19:22:23 +01:00
bubnikv
695c92fb00
CLIPPER_OFFSET_SCALE was made a power of two, the scaling functions
...
inside ClipperUtils are now using bit shifts instead of multiplication
by doubles, which makes the scaling precise.
Removed the scale parameter from all offset functions.
Modified the safety offset to calculate offset per polygon instead
of over all polygons at once. The old way was not safe and very slow,
sometimes this meant a kiss of death for supports for example.
2016-11-28 17:33:17 +01:00
bubnikv
bfb336df0c
Refactored Print::validate() method to not throw an exception, but
...
to return a string with an error message instead. This was necessary
to avoid a hang-up on some Strawberry Perl distributions, when
a perl "croak" function is called after a C++ exception is caught.
2016-11-05 02:23:46 +01:00
bubnikv
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
bubnikv
2a5095a1ea
OpenGL support through GLEW. Only active if compiled with SLIC3R_GUI=1.
2016-09-14 16:31:26 +02:00
bubnikv
620c6c7378
Ported from the playground branch. Various documentation and optimization.
2016-09-13 13:30:00 +02:00
Alessandro Ranellucci
8138fbf349
New --retract-lift-above and --retract-lift-below options. #763 #3057
2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
4913e90e10
Remove any Perl related code from libslic3r
2015-12-08 00:39:54 +01:00
Alessandro Ranellucci
3a9cf91f83
Ported a couple more methods to XS
2015-12-02 18:29:33 +01:00
Alessandro Ranellucci
a16dda0885
Bugfix: changes to the resolution config option didn't trigger reslicing. #2795
2015-04-29 19:22:44 +02:00
Alessandro Ranellucci
8654537e55
Use support material layer height for raft layer instead of object layer height. #2723
2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
095391d702
When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701
2015-03-06 21:35:00 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
8791f5a493
Cleanup of some method signatures and of XS return types
2015-01-19 18:53:04 +01:00
Alessandro Ranellucci
af92e3d49e
Bugfix: validation for sequential printing was not entirely correct. #2480
2015-01-07 21:57:22 +01:00
Alessandro Ranellucci
494efe65b2
Bugfix: auto-center didn't update the PrintObject copies properly, causing misalignment. #2464
2014-12-29 22:29:24 +01:00
Alessandro Ranellucci
5639132dae
Bugfix: the region_volumes vector was not always extended after creating new regions, causing bad memory access in apply_config(). #2446
2014-12-24 18:35:59 +01:00
Alessandro Ranellucci
c00061678b
Use perimeter extruder for brim. #618
2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
050f9ff61a
Removed two useless methods in Print
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
93d9ee9205
Consider extrusion width in Print::total_bounding_box()
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
e8ab9ac13a
Ported Print::bounding_box(), Print::total_bounding_box(), Print::skirt_flow(), Print:skirt_first_layer_height() to XS
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
e4dd5cf82f
Bugfix: object steps were not invalidated when First layer extrusion width was changed. #2379
2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
e8f242ee3f
Move toolpaths preview to the plater dialog
2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
bf0eb1af0c
Refactored ClipperUtils API for a more consistent arguments convention
2014-11-15 23:44:03 +01:00
Alessandro Ranellucci
334086d605
Bugfix: skirt and brim were not recalculated when objects where just moved in plater
2014-11-12 23:28:42 +01:00
Alessandro Ranellucci
a5787cfb04
Merge branch 'xs-reload-object'
...
Conflicts:
lib/Slic3r/Print.pm
2014-11-12 22:51:48 +01:00
harriv
33cdee1ad6
Removed extra ; from Print.cpp
2014-11-11 22:17:02 +02:00
Alessandro Ranellucci
bad0bd8520
Ported Print::validate() to XS
2014-11-09 15:27:34 +01:00
Alessandro Ranellucci
3e4c572164
Ported some methods including add_model_object() and apply_config() to XS
2014-11-09 12:25:59 +01:00
Alessandro Ranellucci
d645dabcff
Ported reload_object() to XS
2014-11-07 20:25:05 +01:00
Alessandro Ranellucci
c2e710d092
Removed --g0
2014-10-21 21:41:11 +02:00
Alessandro Ranellucci
6adc3477c9
Moved C++ code into new libslic3r directory
2014-08-03 19:42:29 +02:00