12917 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Alessandro Ranellucci	caf41f07dd	Output required filament length and volume to command line and to the gcode file itself	2011-12-20 15:29:15 +01:00
Alessandro Ranellucci	627e1b32e2	Add Slic3r version to gcode comment	2011-12-20 14:20:39 +01:00
Alessandro Ranellucci	5e850557d4	Added note to self about using the skeletonization algorithm to fill small gaps	2011-12-19 13:00:42 +01:00
Alessandro Ranellucci	e2a5c2119f	Bugfix: some holes were skipped	2011-12-19 12:09:14 +01:00
Alessandro Ranellucci	4af295bce3	Bugfix: very wrong infill for low density regions. #127	2011-12-19 09:55:03 +01:00
Alessandro Ranellucci	65a018f156	Move the parsing warning to the end, so that it won't block slicing	2011-12-18 13:43:31 +01:00
Alessandro Ranellucci	f20209ce01	Add spacing between adjacent surfaces to avoid mini blobs	2011-12-18 13:38:45 +01:00
Alessandro Ranellucci	e5619ee543	Bugfix: not all paths were closed correctly due to float rounding	2011-12-18 11:53:15 +01:00
Alessandro Ranellucci	47bbe18de2	Additional check to return a friendly error when binary STL is not valid	2011-12-18 10:50:55 +01:00
Alessandro Ranellucci	eca6d0b6d0	Adjust flow for solid surfaces when using concentric infill too. #120	2011-12-17 20:29:06 +01:00
Alessandro Ranellucci	6a3eeef83b	Removed warnings for concentric infill. #121	2011-12-17 19:59:31 +01:00
Alessandro Ranellucci	f73febff7a	Always start concentric infill from the center. #120	2011-12-17 19:56:56 +01:00
Alessandro Ranellucci	d63eabcfa5	Clip less from loops to avoid gaps	2011-12-17 19:54:35 +01:00
Alessandro Ranellucci	1e6ecd9eab	Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.	2011-12-17 19:52:34 +01:00
Alessandro Ranellucci	cd0fd80a69	Restore better perimeter/infill overlap for solid surfaces	2011-12-16 18:37:43 +01:00
Alessandro Ranellucci	8e04d763f4	Don't increase flow for overlapping purposes when bridging	2011-12-16 10:53:22 +01:00
Alessandro Ranellucci	f5eb4f03e1	Skirt can be disabled by either setting skirts to 0 or skirt-height to 0	2011-12-16 09:55:13 +01:00
Alessandro Ranellucci	172253cfd7	Always use rectilinear infill for internal-solid surfaces	2011-12-15 22:05:15 +01:00
Alessandro Ranellucci	8e06a4f6f2	Bugfix: fatal error when using concentric infill	2011-12-15 21:46:29 +01:00
Alessandro Ranellucci	e6bce05d9b	Releasing 0.5.6	2011-12-15 20:39:14 +01:00
Alessandro Ranellucci	b422537cc4	Bugfix: do not die when no layers are detected at all	2011-12-15 20:36:46 +01:00
Alessandro Ranellucci	18cfc15ead	Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)	2011-12-15 20:21:34 +01:00
Alessandro Ranellucci	2e013e72e8	Bugfix: models located very far from XYZ origin were incorrectly placed on the print area	2011-12-15 19:40:32 +01:00
Alessandro Ranellucci	40d06a6e11	Erorr in last commit about automatic extrusion width. #112	2011-12-15 12:50:02 +01:00
Alessandro Ranellucci	156a1deb0a	Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112	2011-12-15 09:33:42 +01:00
Alessandro Ranellucci	d346bc02cc	Comments are now disabled by default, new --gcode-comments option to enable them	2011-12-14 19:49:21 +01:00
Alessandro Ranellucci	3d213069a6	Bugfix: 100% overlap between perimeter and infill. #118	2011-12-14 19:40:18 +01:00
Alessandro Ranellucci	b9d01a32e5	Merge branch 'new-math'	2011-12-14 16:12:05 +01:00
Alessandro Ranellucci	2475de0554	Fix Pronterface instructions	2011-12-14 16:10:36 +01:00
Alessandro Ranellucci	048f7ca468	Adjusted flow width for solid infills was ignored	2011-12-14 11:35:19 +01:00
Alessandro Ranellucci	4bee1a12b8	Take overlap into account for external dimensions	2011-12-14 11:21:43 +01:00
Alessandro Ranellucci	efbcbc5bbf	Changed default retraction speed to 30mm/s. #115	2011-12-14 10:33:22 +01:00
Alessandro Ranellucci	ca5dfc05e7	Accept STL files with spaces at the end of vertex lines. #119	2011-12-14 10:29:08 +01:00
Alessandro Ranellucci	cf33ec0a5c	Notes about integration with Pronterface	2011-12-13 21:51:07 +01:00
Alessandro Ranellucci	569e737ae1	Only connect infill edges when not doing solid surfaces	2011-12-13 17:36:03 +01:00
Alessandro Ranellucci	56691c1dea	Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112	2011-12-13 17:34:31 +01:00
Alessandro Ranellucci	869cb48c1a	Merge branch 'master' of github.com:alexrj/Slic3r	2011-12-12 17:35:18 +01:00
Alessandro Ranellucci	3c2b2cfef2	Bugfix: duplicate options did not work correctly for copies > 2. #113	2011-12-12 17:32:45 +01:00
Alessandro Ranellucci	344a038fea	Merge pull request #114 from rtgoodwin/add_scale_output ... Added scale to settings output in gcode	2011-12-11 14:22:39 -08:00
Richard Goodwin	557afcc4b1	Added scale to settings output	2011-12-11 15:32:47 -06:00
Alessandro Ranellucci	9a610395ce	Move post-processing to utils/ directory	2011-12-11 10:20:53 +01:00
Alessandro Ranellucci	e99de80cd8	Merge pull request #111 from triffid/z-every-line-postprocessing-script ... Z every line postprocessing script	2011-12-11 01:20:22 -08:00
Michael Moon	ca25494177	add some comments	2011-12-11 08:27:16 +11:00
Michael Moon	359d4073df	add z-every-line script, first attempt	2011-12-11 08:22:14 +11:00
Alessandro Ranellucci	0ebd8eb8a9	Don't die when config has unknown options. #108	2011-12-10 10:39:07 +01:00
Alessandro Ranellucci	c957c27367	Remember last opened directory. #106	2011-12-09 14:07:50 +01:00
Alessandro Ranellucci	b92ba67272	Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac	2011-12-08 22:06:53 +01:00
Alessandro Ranellucci	0a74e068a3	Merge branch 'infill-overlap'	2011-12-08 10:53:24 +01:00
Alessandro Ranellucci	d9a70ea80d	Customizable overlap ratio (it defaults to 0.15 now)	2011-12-08 10:53:07 +01:00
Alessandro Ranellucci	7473d5f140	Set default infill angle to 45°. #103	2011-12-08 10:33:05 +01:00