10166 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Alessandro Ranellucci	627e1b32e2	Add Slic3r version to gcode comment	2011-12-20 14:20:39 +01:00
Alessandro Ranellucci	5e850557d4	Added note to self about using the skeletonization algorithm to fill small gaps	2011-12-19 13:00:42 +01:00
Alessandro Ranellucci	e2a5c2119f	Bugfix: some holes were skipped	2011-12-19 12:09:14 +01:00
Alessandro Ranellucci	4af295bce3	Bugfix: very wrong infill for low density regions. #127	2011-12-19 09:55:03 +01:00
Alessandro Ranellucci	65a018f156	Move the parsing warning to the end, so that it won't block slicing	2011-12-18 13:43:31 +01:00
Alessandro Ranellucci	f20209ce01	Add spacing between adjacent surfaces to avoid mini blobs	2011-12-18 13:38:45 +01:00
Alessandro Ranellucci	e5619ee543	Bugfix: not all paths were closed correctly due to float rounding	2011-12-18 11:53:15 +01:00
Alessandro Ranellucci	47bbe18de2	Additional check to return a friendly error when binary STL is not valid	2011-12-18 10:50:55 +01:00
Alessandro Ranellucci	eca6d0b6d0	Adjust flow for solid surfaces when using concentric infill too. #120	2011-12-17 20:29:06 +01:00
Alessandro Ranellucci	6a3eeef83b	Removed warnings for concentric infill. #121	2011-12-17 19:59:31 +01:00
Alessandro Ranellucci	f73febff7a	Always start concentric infill from the center. #120	2011-12-17 19:56:56 +01:00
Alessandro Ranellucci	d63eabcfa5	Clip less from loops to avoid gaps	2011-12-17 19:54:35 +01:00
Alessandro Ranellucci	1e6ecd9eab	Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.	2011-12-17 19:52:34 +01:00
Alessandro Ranellucci	cd0fd80a69	Restore better perimeter/infill overlap for solid surfaces	2011-12-16 18:37:43 +01:00
Alessandro Ranellucci	8e04d763f4	Don't increase flow for overlapping purposes when bridging	2011-12-16 10:53:22 +01:00
Alessandro Ranellucci	f5eb4f03e1	Skirt can be disabled by either setting skirts to 0 or skirt-height to 0	2011-12-16 09:55:13 +01:00
Alessandro Ranellucci	172253cfd7	Always use rectilinear infill for internal-solid surfaces	2011-12-15 22:05:15 +01:00
Alessandro Ranellucci	8e06a4f6f2	Bugfix: fatal error when using concentric infill	2011-12-15 21:46:29 +01:00
Alessandro Ranellucci	e6bce05d9b	Releasing 0.5.6	2011-12-15 20:39:14 +01:00
Alessandro Ranellucci	b422537cc4	Bugfix: do not die when no layers are detected at all	2011-12-15 20:36:46 +01:00
Alessandro Ranellucci	18cfc15ead	Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)	2011-12-15 20:21:34 +01:00
Alessandro Ranellucci	2e013e72e8	Bugfix: models located very far from XYZ origin were incorrectly placed on the print area	2011-12-15 19:40:32 +01:00
Alessandro Ranellucci	40d06a6e11	Erorr in last commit about automatic extrusion width. #112	2011-12-15 12:50:02 +01:00
Alessandro Ranellucci	156a1deb0a	Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112	2011-12-15 09:33:42 +01:00
Alessandro Ranellucci	d346bc02cc	Comments are now disabled by default, new --gcode-comments option to enable them	2011-12-14 19:49:21 +01:00
Alessandro Ranellucci	3d213069a6	Bugfix: 100% overlap between perimeter and infill. #118	2011-12-14 19:40:18 +01:00
Alessandro Ranellucci	b9d01a32e5	Merge branch 'new-math'	2011-12-14 16:12:05 +01:00
Alessandro Ranellucci	2475de0554	Fix Pronterface instructions	2011-12-14 16:10:36 +01:00
Alessandro Ranellucci	048f7ca468	Adjusted flow width for solid infills was ignored	2011-12-14 11:35:19 +01:00
Alessandro Ranellucci	4bee1a12b8	Take overlap into account for external dimensions	2011-12-14 11:21:43 +01:00
Alessandro Ranellucci	efbcbc5bbf	Changed default retraction speed to 30mm/s. #115	2011-12-14 10:33:22 +01:00
Alessandro Ranellucci	ca5dfc05e7	Accept STL files with spaces at the end of vertex lines. #119	2011-12-14 10:29:08 +01:00
Alessandro Ranellucci	cf33ec0a5c	Notes about integration with Pronterface	2011-12-13 21:51:07 +01:00
Alessandro Ranellucci	569e737ae1	Only connect infill edges when not doing solid surfaces	2011-12-13 17:36:03 +01:00
Alessandro Ranellucci	56691c1dea	Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112	2011-12-13 17:34:31 +01:00
Alessandro Ranellucci	869cb48c1a	Merge branch 'master' of github.com:alexrj/Slic3r	2011-12-12 17:35:18 +01:00
Alessandro Ranellucci	3c2b2cfef2	Bugfix: duplicate options did not work correctly for copies > 2. #113	2011-12-12 17:32:45 +01:00
Alessandro Ranellucci	344a038fea	Merge pull request #114 from rtgoodwin/add_scale_output ... Added scale to settings output in gcode	2011-12-11 14:22:39 -08:00
Richard Goodwin	557afcc4b1	Added scale to settings output	2011-12-11 15:32:47 -06:00
Alessandro Ranellucci	9a610395ce	Move post-processing to utils/ directory	2011-12-11 10:20:53 +01:00
Alessandro Ranellucci	e99de80cd8	Merge pull request #111 from triffid/z-every-line-postprocessing-script ... Z every line postprocessing script	2011-12-11 01:20:22 -08:00
Michael Moon	ca25494177	add some comments	2011-12-11 08:27:16 +11:00
Michael Moon	359d4073df	add z-every-line script, first attempt	2011-12-11 08:22:14 +11:00
Alessandro Ranellucci	0ebd8eb8a9	Don't die when config has unknown options. #108	2011-12-10 10:39:07 +01:00
Alessandro Ranellucci	c957c27367	Remember last opened directory. #106	2011-12-09 14:07:50 +01:00
Alessandro Ranellucci	b92ba67272	Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac	2011-12-08 22:06:53 +01:00
Alessandro Ranellucci	0a74e068a3	Merge branch 'infill-overlap'	2011-12-08 10:53:24 +01:00
Alessandro Ranellucci	d9a70ea80d	Customizable overlap ratio (it defaults to 0.15 now)	2011-12-08 10:53:07 +01:00
Alessandro Ranellucci	7473d5f140	Set default infill angle to 45°. #103	2011-12-08 10:33:05 +01:00
Alessandro Ranellucci	d813aea59a	Don't slow down retractions on bottom layer. #101	2011-12-08 10:28:23 +01:00