Pascal de Bruijn
41c56f2eb8
creality.ini: Extrudr NX2 slightly lower temps
...
After more practical testing, a slightly lower temp is beneficial on
small pointy areas, preventing them from being slightly deformed.
2021-04-13 19:09:54 +02:00
rtyr
6121f1de3b
version bumped up to 0.0.15
2021-04-12 11:42:32 +02:00
Pascal de Bruijn
d09871441a
creality.ini: add Tough PLAs
2021-04-05 17:24:16 +02:00
Pascal de Bruijn
744311f3c3
creality.ini: improve bridging
2021-04-04 15:24:57 +02:00
Pascal de Bruijn
7eaadf0e47
Revert "creality.ini: move Ender-3 specific extruder_clearance"
...
Due to #589 .
This reverts commit 34202f71e5
2021-03-01 23:56:08 +01:00
Pascal de Bruijn
45cbac0b7c
creality.ini: unhide new printers (except CR-X)
2021-03-01 19:00:04 +01:00
Pascal de Bruijn
065a129d47
creality.ini: remove single_extruder_multi_material_priming from printer section
2021-03-01 18:43:40 +01:00
Pascal de Bruijn
7fbb3a2b42
creality.ini: Add CR-5 Pro H
...
this is a high temp variant of the regular CR-5 Pro, with the
suspected all metal hotend, presumably the non-H variant has
a teflon lined hotend
related: 2d762ec320
2021-03-01 18:40:33 +01:00
Pascal de Bruijn
586ed35e3a
creality.ini: fix CR-5 Pro bed_shape
2021-03-01 18:34:18 +01:00
Pascal de Bruijn
f5863cd5d8
creality.ini: CR-200B also has a descending z axis
2021-03-01 18:24:44 +01:00
Pascal de Bruijn
5e78b0f24f
creality.ini: remove ignored renamed_from from *descendingz*
...
fixes: Nonpublic intermediate preset *descendingz* contains a "renamed_from" field, which is ignored
2021-03-01 18:21:27 +01:00
Pascal de Bruijn
34202f71e5
creality.ini: move Ender-3 specific extruder_clearance
...
replace general extruder_clearance with higher values so there's
a lot of clearance leeway until we get exact figures for each
printer model.
related: f9b4bbb016
2021-02-28 17:10:25 +01:00
Pascal de Bruijn
90f58fe90a
creality.ini: CR-200B bed_shape and max_print_height
2021-02-28 17:06:24 +01:00
Pascal de Bruijn
e5b7b20be1
creality.ini: CR-5 Pro more accurate bed
2021-02-28 16:57:35 +01:00
Pascal de Bruijn
19ba6f1492
creality.ini: add CR-200B
2021-02-28 16:53:33 +01:00
Pascal de Bruijn
2d762ec320
creality.ini: add CR-5 Pro
...
retract_length = 3
to prevent clogging since this printer is suspected to have
an all metal hot end, as Creality claims print temperatures
up to 300C
2021-02-28 16:38:05 +01:00
Pascal de Bruijn
249670f82c
creality.ini: fix CR-10 Mini bed_shape
2021-02-28 16:36:58 +01:00
Pascal de Bruijn
bc9c968f05
creality.ini disable single_extruder_multi_material_priming
2021-02-27 18:16:47 +01:00
Pascal de Bruijn
c142af74c5
creality.ini: add printer_notes to Ender3V2
2021-02-27 17:53:20 +01:00
Pascal de Bruijn
19c50c7e69
creality.ini: consolidate more properties to *common*
2021-02-27 17:51:57 +01:00
Pascal de Bruijn
6391d4243f
creality.ini: tweak fill_density and skirt_distance
2021-02-27 17:40:44 +01:00
Pascal de Bruijn
9b7621dc7e
creality.ini: double digit layer height (cosmetic)
2021-02-23 20:06:55 +01:00
Pascal de Bruijn
f9b4bbb016
creality.ini: more accurate extruder_clearance for Ender-3
...
radius = 47mm = 45mm carriage (including bltouch upgrade)
+ 2mm safety margin
height = 34mm = 30mm nozzle
+ 2mm bltouch probe pin
+ 2mm safety margin
2021-02-23 19:53:30 +01:00
Pascal de Bruijn
b06030f2bc
creality.ini: allow slightly steeper unsupported angles
2021-02-23 19:23:35 +01:00
rtyr
39ba24abd7
Updated version
2021-02-22 09:23:58 +01:00
Pascal de Bruijn
5f1129acea
creality.ini: descendingz gcode comment improvement
2021-02-19 18:54:47 +01:00
Pascal de Bruijn
5842842770
creality.ini: descendingz is more descriptive
2021-02-19 18:05:47 +01:00
Pascal de Bruijn
5c287cd998
creality.ini: relocate max_print_height close to bed_shape
2021-02-18 19:37:55 +01:00
Pascal de Bruijn
66a30b8102
creality.ini: add CR-8
2021-02-18 19:28:09 +01:00
Pascal de Bruijn
0cfa04fe2f
creality.ini: add Ender-4
2021-02-18 19:20:54 +01:00
Pascal de Bruijn
138501338c
creality.ini: add safe zone for Ender-3 V2
2021-02-18 19:06:03 +01:00
rtyr
669e8d573c
Merge pull request #6069 from pmjdebruijn/creality_start_gcode_2
...
creality.ini: improve start_gcode comments
2021-02-17 22:52:11 +01:00
Pascal de Bruijn
991bab61bb
creality.ini: support CR-6 SE pause print
2021-02-17 19:49:15 +01:00
Pascal de Bruijn
e3ea71a0d6
creality.ini: improve start_gcode comments
2021-02-17 18:39:59 +01:00
Pascal de Bruijn
e7ffcec29e
creality.ini: add Ender-6
2021-02-15 13:53:55 +01:00
Pascal de Bruijn
104c560575
creality.ini: Move Ender-3 V2 into proper order
2021-02-11 17:31:51 +01:00
Pascal de Bruijn
5dbd503d3d
creality.ini: add Ender-3 Max
2021-02-11 17:24:01 +01:00
Pascal de Bruijn
d135bd86de
creality.ini: Add Extrudr GreenTEC Pro filament
2021-02-08 17:07:41 +01:00
Pascal de Bruijn
7f925e700b
creality.ini: add experimental support for CR-X (Pro)
2021-02-07 16:45:14 +01:00
Pascal de Bruijn
723e0b6e9d
creality.ini: Add safety zone for CR-10 S Pro
2021-02-07 15:43:48 +01:00
Pascal de Bruijn
8feef8bcf0
creality.ini: add vendor associated color for Das Filament
2021-02-07 15:03:09 +01:00
Pascal de Bruijn
8ff82cc1d2
creality.ini: increase CR-6/CR-10 Max retract_length slightly
2021-02-07 13:48:28 +01:00
Pascal de Bruijn
622664ef8e
creality.ini: Add CR-10 Max
2021-02-05 17:28:44 +01:00
Pascal de Bruijn
6373c7f1cb
creality.ini: Add CR-6 Max and add safety border to CR-10 S4
2021-02-04 18:41:17 +01:00
Pascal de Bruijn
a4a465b9a6
creality.ini: Creality CR-6 SE improvements
2021-02-03 17:34:06 +01:00
rtyr
c8e5277f0c
Updated print temperature for Das Filament PLA
...
https://github.com/prusa3d/PrusaSlicer/issues/5693
2021-02-01 21:22:30 +01:00
rtyr
31e7a60494
Creality - bumped up version to 0.0.13
2021-01-29 10:43:34 +01:00
Pascal de Bruijn
1f9fe92720
creality.ini: hide CR-6 SE until next release
2021-01-28 18:14:19 +01:00
Pascal de Bruijn
ba87613454
creality.ini: update start_gcode/end_gcode comments
2021-01-28 18:13:45 +01:00
Pascal de Bruijn
ba6a40bcce
creality.ini: add CR-6 SE
2021-01-27 17:42:32 +01:00
