Commit Graph

14509 Commits

Author SHA1 Message Date
tamasmeszaros
2a98aa113c Remove unused RotoptimzeWindow imgui dialog.
It might be added in the future in a more polished form.
2020-11-06 10:06:05 +01:00
Vojtech Bubnik
139b58a6f2 Adaptive Cubic infill with anchors: Trimming anchors with not only
with a neighbor T-joint line, but also with other crossing lines.
2020-11-06 08:56:53 +01:00
YuSanka
a131217ada Added missed parent for the SysInfoDialog
see f0a339758b
2020-11-05 22:19:48 +01:00
YuSanka
ed2f03ec79 Localization:
Some phrases are corrected in the code
The POT-file is updated
2020-11-05 22:17:49 +01:00
YuSanka
f0a339758b Fixed a Dialog position under OSX
Always set parent for the Dialog, if we want to see the Dialog in the same display as a parent.
Dialog will be shown in the primary monitor otherwise.

+ fixed a draw of the canvas legend when we move application between Retina and non-Retina displays
2020-11-05 11:53:16 -08:00
David Kocik
95d808f7c4 Merge branch 'dk_filaments' into master 2020-11-05 17:44:21 +01:00
David Kocik
e9295e268a config wizard printer selection - changed vertical spacing 2020-11-05 17:43:40 +01:00
Vojtech Bubnik
239d588c5d 1) Implemented anchoring of infill lines to perimeters with length
limited anchors, while before a full perimeter segment was always
   taken if possible.
2) Adapted the line infills (grid, stars, triangles, cubic) to 1).
   This also solves a long standing issue of these infills producing
   anchors for each sweep direction independently, thus possibly
   overlapping and overextruding, which was quite detrimental
   in narrow areas.
3) Refactored cubic adaptive infill anchroing algorithm
   for performance and clarity.
2020-11-05 17:32:40 +01:00
enricoturri1966
8491872fb7 #5079 - Fixed GCode Viewer changing files modified date on Windows 2020-11-05 14:02:43 +01:00
enricoturri1966
6d56e60091 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-11-05 11:02:08 +01:00
enricoturri1966
aea09b8347 #5072 - Added color icon into 'Print' items in legend for gcode color print visualization 2020-11-05 11:01:54 +01:00
enricoturri1966
2ec5a0d46c Fixed visualization of gcode toolpaths for spiral vase mode 2020-11-05 11:00:04 +01:00
rtyr
3da92257d2
Anycubic 0.0.3 2020-11-05 10:42:08 +01:00
rtyr
94c54d0538
Bumped up version to 0.0.3 2020-11-05 10:40:35 +01:00
rtyr
8f2812dd3b
Merge pull request #5086 from Tillverka3d/master
fix infill_overlap, start_gcode, end_gcode for anycubic predator
2020-11-05 10:39:28 +01:00
Nicolas North [norðurljósahviða]
69fd5c1074
fix infill_overlap, start_gcode, end_gcode for anycubic predator 2020-11-05 03:24:51 +01:00
YuSanka
ea5fdcd7b1 Removed cog icon from the horizontal slider.
+ Shortcut "Shift+G" works from the Preview canvas now (not just from the focused slider as before)
2020-11-04 07:30:33 -08:00
Lukas Matena
ece27dcc42 Bumped up version number 2020-11-04 15:45:37 +01:00
David Kocik
5d16c5f466 imgui README.md updated 2020-11-04 13:48:30 +01:00
enricoturri1966
747fcb1d07 Follow-up of d2e5be89e3 -> Fixed processing of color print, pause print and custom gcode tags 2020-11-04 13:33:27 +01:00
YuSanka
11ee0cc2cc Hot-fix for my last commit (d576c029bd) 2020-11-04 13:14:57 +01:00
Lukas Matena
ab6af3ff68 Fix of #5058 (failing build with wx3.0) 2020-11-04 11:58:45 +01:00
YuSanka
d576c029bd CustomCtrl : fixed correction of the CustomCtrl's line height in respect to the height of the inside controls (fields or widgets)
Issue was appeared on the Ubuntu 20.04
2020-11-04 10:17:32 +01:00
David Kocik
3ca3a544a8 New Export Finished notification showing path and opening containing folder. Fix of #4917. Fixed wrongly grayed eject button in File menu. Hopefully fix of ctrl shortcut of tooltips at sidebar. 2020-11-04 09:29:08 +01:00
rtyr
729304c129
Creality - Prusament PLA temp adjust 2020-11-03 22:15:39 +01:00
rtyr
f623aaa07e
Merge pull request #5070 from pmjdebruijn/creality_filament_2
Creality filament 2
2020-11-03 22:09:43 +01:00
Pascal de Bruijn
893475d7ed creality.ini: fix first_layer_bed_temperature for Generic PLA 2020-11-03 19:39:45 +01:00
Pascal de Bruijn
f119bc9872 creality.ini: optimize Generic PLA
with some exceptions most regular PLAs seem to print well
around 200C, which is most likely due to the limited
effectiveness of the part cooling fan design on most
Creality printers
2020-11-03 19:32:00 +01:00
Pascal de Bruijn
eb0534b7b5 creality.ini: add 123-3D Jupiter PLA filament
print temperature based on a temperature tower test

190C seems to produce some inconsistencies
200C seems like the best tradeoff
210C has noticably worse bridging/overhangs

Offical pricing from the vendor is 19.50EUR per 1KG roll
2020-11-03 19:28:01 +01:00
Pascal de Bruijn
590ea85de5 creality.ini: add 3DJAKE ecoPLA filament
print temperature based on a temperature tower test

going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 210C

Offical pricing from the vendor is 21.99EUR per 1KG roll
2020-11-03 17:45:44 +01:00
Pascal de Bruijn
f4203e6509 creality.ini: add Velleman PLA filament
print temperature based on a temperature tower test

going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 215C

There is no reference pricing from the Belgian vendor,
however 20,99 per 0.75KG roll seems common
2020-11-03 17:38:01 +01:00
YuSanka
4d7b5d4451 "Sequential slider applied only to top layer" parameter from the Preferences is applied just for the horizontal slider now 2020-11-03 15:45:23 +01:00
Lukas Matena
b84efca01e Degree sign in FDM supports gizmo dialog:
The sign is used insted of 'deg' and it was moved into the slider,
to make it consistent with sliders in SLA gizmos.
2020-11-03 15:15:09 +01:00
Vojtech Bubnik
414fdaefc5 Merge remote-tracking branch 'remotes/origin/master' into lh_adaptive_infill_hooks 2020-11-03 15:07:38 +01:00
YuSanka
1c1b1bc019 Custom control : Fixed un-hovering for labels, which work as a hyperlinks 2020-11-03 13:40:49 +01:00
enricoturri1966
8af25f7771 Fixed post-processing of placeholders in gcode when not exporting remaining times 2020-11-03 12:26:48 +01:00
enricoturri1966
f94e94f53e GCode tool marker set as visible by default 2020-11-03 09:27:18 +01:00
enricoturri1966
eff95bcdb2 Disabled tech ENABLE_CTRL_M_ON_WINDOWS 2020-11-03 09:07:23 +01:00
enricoturri1966
54d6834553 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-11-03 08:41:14 +01:00
enricoturri1966
30481e1ea8 Tech ENABLE_CTRL_M_ON_WINDOWS [Experimental] to re-enable imgui dialog for settings of 3DConnexion devices (CTRL+M) on Windows 2020-11-03 08:41:04 +01:00
rtyr
51bd0b733e
Added 0.15mm print profile. 2020-11-03 08:35:46 +01:00
rtyr
47b854e0c0
New filament profiles.
https://github.com/prusa3d/PrusaSlicer/pull/5061
2020-11-03 08:27:31 +01:00
YuSanka
0a3109030e PhysicalPrinterDialog : fixed layout in update() 2020-11-02 22:04:40 +01:00
rtyr
36527cbaf2
Added Ender 5 thumbnail 2020-11-02 21:13:21 +01:00
rtyr
afa01fe1d7
Merge pull request #5060 from pmjdebruijn/ender5
Add Ender-5 support & related improvements
2020-11-02 21:11:41 +01:00
Pascal de Bruijn
e6f6c59dae creality.ini: fix Ender-5 end_gcode comments 2020-11-02 17:17:28 +01:00
Pascal de Bruijn
9ca5de8bdf creality.ini: end_gcode improvement 2020-11-02 17:12:30 +01:00
Pascal de Bruijn
7b10e467cd creality.ini: add Ender-5 2020-11-02 17:11:26 +01:00
Pascal de Bruijn
925900f235 creality.ini: fix Ender-5 Plus bed_shape 2020-11-02 17:02:24 +01:00
YuSanka
186d408cf4 Big code cleaning
Deleted all unused code
2020-11-02 06:48:30 -08:00