Alessandro Ranellucci
7180e7cb30
Speed optimization in avoid_crossing_perimeters
2013-05-19 10:35:11 +02:00
Alessandro Ranellucci
e33ca54943
Some code cleanup in MotionPlanner
2013-05-17 20:03:38 +02:00
Alessandro Ranellucci
bc9ff47d3f
New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline
2013-04-27 15:02:13 +02:00
Alessandro Ranellucci
04d2231901
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
2f046799f2
Removed offset() method from Slic3r::Polygon because it only works with ccw polygons
2013-03-26 14:03:24 +01:00
Alessandro Ranellucci
4c41f6c462
Safer safety_offset() for ExPolygons
2013-03-26 13:57:37 +01:00
Alessandro Ranellucci
0f5064dd32
Untested fix for incomplete honeycomb support material. #1032
2013-03-16 21:10:12 +01:00
Alessandro Ranellucci
33b40eda18
Always fix self-intersecting polygons that Douglas-Peucker might return
2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
fa41e15c68
Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035
2013-03-09 17:07:11 +01:00
Alessandro Ranellucci
36d24ccb0b
Infill refactoring and cleanup complete
2013-03-07 15:47:32 +01:00
Alessandro Ranellucci
8ce7b13db5
Fixed regression in is_printable() - needs unit test
2013-02-26 20:54:40 +01:00
Alessandro Ranellucci
b9c84490b8
Get rid of most calls to $Slic3r::flow
2013-02-19 12:37:26 +01:00
Alessandro Ranellucci
7d08796b0a
Remove sporadic duplicate useless lines. #772
2013-02-04 14:27:23 +01:00
Alessandro Ranellucci
48e00a4c40
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Print.pm
lib/Slic3r/SVG.pm
2013-01-12 19:00:18 +01:00
Alessandro Ranellucci
f001374c6e
New implementation of the little inwards move before leaving a loop. #186
2012-12-05 11:31:35 +01:00
Alessandro Ranellucci
e21c806ee9
New wkt() method for debugging
2012-11-06 20:31:50 +01:00
Alessandro Ranellucci
68e1edab80
Require Math::Clipper 1.14 and increase scale factor for offset(). #720
2012-11-05 00:17:46 +01:00
Alessandro Ranellucci
554d10c854
Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects)
2012-10-31 19:08:29 +01:00
Alessandro Ranellucci
cec7bf815c
Get rid of the ExtrusionLoop objects in concentric filler
2012-10-30 15:29:13 +01:00
Alessandro Ranellucci
c95cd5ac38
Merge branch 'master' into avoid-crossing-perimeters
2012-09-21 15:36:45 +02:00
Alessandro Ranellucci
e40f32995f
Finish GUI decoupling
2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
cc8d8bd26f
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
README.markdown
lib/Slic3r/Config.pm
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
slic3r.pl
2012-09-12 16:04:16 +02:00
Alessandro Ranellucci
896641cb7e
Fixed regression causing some bridges not to be detected correctly. #629
2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
0eadc5adba
Manual rebase of the avoid_crossing_perimeters feature
2012-08-23 15:42:58 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Mark Hindess
b11778a85f
polygon_lines returns array of Slic3r::Line objects so bless is redundant.
2012-07-01 23:14:04 +01:00
Nicolas Dandrimont
4296ea6da1
Slic3r::Polygon's boost_linestring method needs to close the contour.
...
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour). This
addresses some of the bridge detection issues (#414 , #358 ).
2012-06-14 13:33:59 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
efdf266df1
Removed useless Polygon constructor and some cleanup
2012-05-23 11:51:20 +02:00
Alessandro Ranellucci
5a78111efa
Options to set extruder clearance for sequential printing and graphical preview of collisions
2012-05-23 11:47:52 +02:00
Alessandro Ranellucci
8ba6405cc9
Bugfix: some nearly-thin walls were discarded. #261
2012-05-05 17:07:38 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
cb182b8bc2
Honeycomb infill. #300
2012-04-16 11:55:14 +02:00
Alessandro Ranellucci
0afb5ad9dd
Bugfix: some holes were filled. #291
2012-04-02 11:40:12 +02:00
Alessandro Ranellucci
e8c64924db
Some GUI fixes after the recent contributions
2012-03-03 21:25:26 +01:00
Alessandro Ranellucci
c98f6734c7
Code optimization
2012-02-25 22:18:07 +01:00
Alessandro Ranellucci
eba7c10018
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
c3fc6ee66b
Fix regression introduced with f2e1fe5241
2012-02-21 20:16:03 +01:00
Alessandro Ranellucci
aa7a5d6069
Removed warning
2012-02-21 14:31:51 +01:00
Alessandro Ranellucci
f2e1fe5241
Do hole perimeters in ccw direction too
2012-02-21 14:29:58 +01:00
Alessandro Ranellucci
4ade11b26e
Some minor fixes related to polyline refactoring
2012-01-27 14:29:06 +01:00
Alessandro Ranellucci
debdd164e2
Bugfix: fatal error and warnings removed when cleaning some dirty layers
2012-01-21 18:44:24 +01:00
Alessandro Ranellucci
8ed91a8ec4
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
2011-12-30 19:59:51 +01:00
Alessandro Ranellucci
1c7564e4a4
Thin walls. #24
2011-12-30 17:17:37 +01:00
Alessandro Ranellucci
a1c766cc52
New bridging logic, more robust. #58
2011-11-19 16:44:24 +01:00
Alessandro Ranellucci
580f42c1de
Use the same bridging logic for "reverse bridges" (top surfaces)
2011-11-17 10:34:40 +01:00
Alessandro Ranellucci
8aca717209
Print solid infill without cutting an internal surface under small regions such as pillars. #39
2011-11-16 16:35:20 +01:00
Alessandro Ranellucci
038caddcda
New fill types (hilbertcurve, archimedeanchords, octagramspiral) and ability to use different patterns for solid layers. #20
2011-11-13 18:14:02 +01:00
Alessandro Ranellucci
fec816b065
Collect undetected lines (caused by dirty or non-manifold models), warn the user, post debug info. Includes some further ExPolygon refactoring.
2011-11-11 10:21:48 +01:00
