3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,076 Commits 1 Branch 1 Tag 249 MiB
4ab972b87a
Commit Graph

82 Commits

Author SHA1 Message Date
slicer-builder
bb22f1dc8a prototyping tweakable XY supports; 
option should be present now in advanced support menu.
Can't figure out what's going on atm; support should be moving but isn't
 2017-01-03 11:46:52 +01:00
Joseph Lenox
f63c21f0f3 Added a feature to increase gap between object in XY and generated supports. 
Advanced feature, may not generate supports that are printable.
 2017-01-03 11:43:18 +01:00
bubnikv
07dd06c53c Merge remote-tracking branch 'origin/supports-synchronize-layers' 2017-01-03 10:51:23 +01:00
bubnikv
955bc957ba New supports now do rafts at least to the extent the test cases run through. 
New supports enabled, old supports will go away soon.
 2016-12-20 12:19:13 +01:00
bubnikv
26a8017e99 Made the support interface contact loops configurable. 2016-11-30 17:33:55 +01:00
bubnikv
38cb2842ac support_material_synchronize_layers implementation 2016-11-30 16:06:12 +01:00
bubnikv
695c92fb00 CLIPPER_OFFSET_SCALE was made a power of two, the scaling functions 
inside ClipperUtils are now using bit shifts instead of multiplication
by doubles, which makes the scaling precise.

Removed the scale parameter from all offset functions.

Modified the safety offset to calculate offset per polygon instead
of over all polygons at once. The old way was not safe and very slow,
sometimes this meant a kiss of death for supports for example.
 2016-11-28 17:33:17 +01:00
bubnikv
95ede7c4b8 Rewrote Fill2.pm to C++, deleted Perl infills for good. 
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
 2016-11-02 10:47:00 +01:00
bubnikv
15d3e94a66 Unified the creation of paths of debugging output files 
pointing to a predefined output directory.
 2016-10-21 10:18:01 +02:00
bubnikv
9e4edcd8ec Enabled the C++ fillers for all infills, not just the supports. 
Made sure the C++ fillers are instantiated at the worker threads,
where there are being released.
Extended the FillRectilinear2 to calculate the contour / line intersection
with exact arithmetics, improved robustness and added error handling
and error reporting, if the contours to be filled are not correct.
 2016-10-20 17:44:46 +02:00
bubnikv
7d7f093120 C++ supports sketched, but not finalized yet. Slic3r is still using 
the old Perl supports, but this time with the C++ fillers.
 2016-10-16 16:30:56 +02:00
bubnikv
5268574ade Made the sheath around the base support configurable. Without the sheath 
it is easier to remove the support, but the support is more fragile.
 2016-10-04 14:38:13 +02:00
bubnikv
5bb37ad2c4 A new feature "support_material_buildplate_only" implemented. 
Also a bug has been fixed for zero interface layers. Before
slic3r would put infinite number of interface layers over top surfaces,
if the number of interface layers was set to zero.
 2016-10-04 13:54:10 +02:00
bubnikv
9a83d4e8d5 Reverted some now unnecessary changes. Reverted the infill to the original perl implementation. 2016-09-12 13:26:17 +02:00
bubnikv
3a0172888a Adapted to the new infills. 2016-04-15 17:54:47 +02:00
bubnikv
7da68c91a5 Vojtech likes to use Sublime on Windows to get the wheels rolling. 2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
9fcec10737 Finished porting LayerRegion to C++ 2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
52d3a047a0 One more raft issue causing extra layers. #2723 2015-06-03 09:39:10 +02:00
Alessandro Ranellucci
6018dafc46 Removed debugging statement 2015-06-02 20:03:57 +02:00
Alessandro Ranellucci
5ce4d8cfb0 Bugfix: extra thin layers added to raft. #2723 2015-06-02 19:58:36 +02:00
Alessandro Ranellucci
ee66392e11 Fix numerical issues causing incomplete raft under certain circumstances. Includes a minor refactoring of raft layer logic. #2723 2015-06-02 19:44:29 +02:00
Alessandro Ranellucci
70ace8c76f Bugfix: use proper spacing for first support layer instead of trying to align it to upper layers. #2662 2015-02-27 18:43:15 +01:00
Alessandro Ranellucci
8605969dc5 Don't output slic3r:z attribute in SVG for raft layers 2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
1d204af6f4 Fixed regression causing rectilinear infill to be misaligned across layers. #2566 2015-01-28 19:49:56 +01:00
Alessandro Ranellucci
7b980c1dc9 New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703 2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
406d045ced The inwards move after an external loop was still randomly generated outwards in some cases. Perimeters are now generated with a distinct iterator for each slice. Nested islands are also correctly supported too. Various regression tests included. #2253 2015-01-08 15:22:13 +01:00
Alessandro Ranellucci
d38503bf44 Bugfix: downwards interface detection might cause a crash 2014-12-29 14:29:21 +01:00
Alessandro Ranellucci
af446dc7d4 Apply contact distance to first support layer above object's top surfaces too. #1939 2014-12-23 22:18:43 +01:00
Alessandro Ranellucci
473802ce8c Use support material interface extruder for layers above object's top surfaces too. #1939 2014-12-23 01:04:25 +01:00
Alessandro Ranellucci
e79aa2e81c New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618 2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
e8ab9ac13a Ported Print::bounding_box(), Print::total_bounding_box(), Print::skirt_flow(), Print:skirt_first_layer_height() to XS 2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
09fd5b4af4 Bugfix: adjust flow by using each support layer's height instead of a bogus one. #2269 2014-11-07 23:18:35 +01:00
Y. Sapir
a168973bea Call get_layer instead of layers->[] (more efficient now that layers() recreates the array). 2014-06-13 18:46:14 +03:00
Alessandro Ranellucci
8ee11b3239 Refactoring: keep height in Flow object and calculate spacing on demand 2014-06-12 01:00:13 +02:00
Alessandro Ranellucci
1674108bac Don't apply pillars to raft layers 2014-06-11 21:58:35 +02:00
Alessandro Ranellucci
82e2dd4e62 Bugfix: wrong number of raft layers in some situations due to a numerical error 2014-06-11 21:58:28 +02:00
Alessandro Ranellucci
ba8148f4ad Merge branch 'printcpp' of github.com:sapir/Slic3r into sapir-printcpp 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
	lib/Slic3r/Print/Region.pm
 2014-06-10 14:46:40 +02:00
Alessandro Ranellucci
3599bd0bae Distinct extrusion width for external perimeters 2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
39b8ac80ee Ignore holes in object footprint when generating raft 2014-05-29 14:54:47 +02:00
Alessandro Ranellucci
8290a006ed Bugfix: a lot of extra support material was generated when using both raft layers and support material. #2030 2014-05-26 14:09:42 +02:00
Y. Sapir
8da0bded1d Move Print object storage to C++. (along with its subobjects) 2014-05-24 23:50:29 +03:00
Alessandro Ranellucci
59f0e76da1 Distinct extrusion role for support material interface 2014-05-12 22:59:49 +02:00
Alessandro Ranellucci
c37ef2f18b New semantics for ExtrusionLoop objects. Early processing of perimeter overhangs for paralellizing such work and making G-code export lighter. Lots of refactoring. This should fix a number of minor bugs, including reversals of perimeter overhangs. 2014-05-08 11:07:37 +02:00
Alessandro Ranellucci
5f88135074 Adjust XY distance of the contact loop 2014-05-02 10:49:14 +02:00
Alessandro Ranellucci
4311f30739 Fixed one typo in BridgeDetector and some improvements to support material 2014-05-01 19:11:53 +02:00
Alessandro Ranellucci
010b71e9d4 Improvements to avoid numerical issues in bridge detection and bridge exclusion 2014-04-30 15:16:15 +02:00
Alessandro Ranellucci
8ded268e7e Take into account that $layerm->perimeters also contains ExtrusionPath objects. #1991 2014-04-30 10:47:31 +02:00
Alessandro Ranellucci
1667d1826d Put continuous base flange under pillars support material 2014-04-30 01:51:19 +02:00
Alessandro Ranellucci
1d10cd3da6 Also remove bridged perimeters area from support material 2014-04-30 01:20:18 +02:00
Alessandro Ranellucci
3e3cc4171c TODO about bridges and support material 2014-04-29 23:40:52 +02:00