Vojtech Bubnik
e687db9eb0
Ported custom_gcode and print unit tests from Perl to C++.
2022-05-06 18:30:18 +02:00
Vojtech Bubnik
a627614b58
Perl unit tests for perimeters and multi-material were rewritten to C++.
...
Perl binding was slimmed down, namely Clipper is no more linked by Perl.
2022-05-04 15:06:04 +02:00
bubnikv
95ede7c4b8
Rewrote Fill2.pm to C++, deleted Perl infills for good.
...
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
2016-11-02 10:47:00 +01:00
bubnikv
9e4edcd8ec
Enabled the C++ fillers for all infills, not just the supports.
...
Made sure the C++ fillers are instantiated at the worker threads,
where there are being released.
Extended the FillRectilinear2 to calculate the contour / line intersection
with exact arithmetics, improved robustness and added error handling
and error reporting, if the contours to be filled are not correct.
2016-10-20 17:44:46 +02:00
bubnikv
b2a6f43923
Documented perl modules.
2016-09-13 11:24:55 +02:00
Alessandro Ranellucci
a32937cef2
Refactoring: new Layer::make_fill() method
2016-02-20 20:51:07 +01:00
Alessandro Ranellucci
4f8a18bbad
Ported Layer::maker_perimeters() to XS
2015-12-02 19:32:57 +01:00
Alessandro Ranellucci
bce3d98d9d
Bugfix: error when setting per-region percent perimeter_extrusion_width. #2983
...
Conflicts:
lib/Slic3r/Layer.pm
2015-11-04 20:10:52 +01:00
Alessandro Ranellucci
9fcec10737
Finished porting LayerRegion to C++
2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
be2f46ca68
Ported Layer::merge_slices() to XS
2015-04-16 20:44:55 +02:00
Alessandro Ranellucci
5deadc8f12
Refactoring: removed _islands members in Slic3r::GCode
2014-11-23 20:03:16 +01:00
Alessandro Ranellucci
ed17c22889
Minor cleanup of imported symbols
2014-10-25 11:15:12 +02:00
Alessandro Ranellucci
380dd8adfc
Ported some methods to XS
2014-08-03 18:41:09 +02:00
Alessandro Ranellucci
d9f5fdae72
Bugfix: make_perimeters() was not truly idempotent because prepare_infill() split ->slices into typed surfaces
2014-07-15 19:07:38 +02:00
Alessandro Ranellucci
bcc8e356b2
Merge perimeters of adjacent regions having the same perimeter settings
2014-07-12 15:28:21 +02:00
Alessandro Ranellucci
5e80d7a388
Readd use strict and use warnings
2014-06-12 09:23:10 +02:00
Alessandro Ranellucci
ba8148f4ad
Merge branch 'printcpp' of github.com:sapir/Slic3r into sapir-printcpp
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/Print/Region.pm
2014-06-10 14:46:40 +02:00
Alessandro Ranellucci
af1a47c461
Minor optimization
2014-06-10 00:54:37 +02:00
Y. Sapir
85cbbed663
Set ISA manually for Slic3r::Layer::Support.
2014-05-24 23:50:46 +03:00
Y. Sapir
8da0bded1d
Move Print object storage to C++. (along with its subobjects)
2014-05-24 23:50:29 +03:00
Alessandro Ranellucci
a31b2e6ca2
Stricter implementation of the overhang detection. Includes unit tests
2014-04-29 19:58:58 +02:00
Alessandro Ranellucci
f6897a346a
Fix islands not being ordered efficiently with the logic that completes each of them before moving to the next one (which is now the default behavior). #1137
2014-04-25 19:11:17 +02:00
Alessandro Ranellucci
fec41d6dfd
Update plater and print upon changing object parts and their settings
2014-03-23 16:45:55 +01:00
Alessandro Ranellucci
e75dbf37fa
Never scale TriangleMesh objects
2013-11-23 19:25:33 +01:00
Alessandro Ranellucci
9f41f0279e
Some work to reduce recursive dependencies between classes
2013-11-11 20:37:06 +01:00
Alessandro Ranellucci
6adce9f66b
Update support material code to use shared memory
2013-09-17 23:14:49 +02:00
Alessandro Ranellucci
fc9cec9d81
Merge branch 'master' into xsdata
...
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print/Object.pm
2013-08-25 19:59:42 +02:00
Alessandro Ranellucci
3d6fb1b05c
New feature: ability to override specific settings for individual objects in the plater. #344
2013-08-25 14:37:50 +02:00
Alessandro Ranellucci
fa07c512b4
Merge branch 'master' into xsdata
...
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
2013-08-16 09:09:56 +02:00
Alessandro Ranellucci
5d80c26b29
Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic
2013-08-09 15:04:14 +02:00
Alessandro Ranellucci
b38cc2c244
Merge branch 'master' into xsdata
...
Conflicts:
lib/Slic3r.pm
lib/Slic3r/ExPolygon.pm
lib/Slic3r/Fill.pm
lib/Slic3r/Fill/Rectilinear.pm
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/TriangleMesh.pm
t/shells.t
xs/MANIFEST
2013-08-08 02:10:34 +02:00
Alessandro Ranellucci
913f401280
Merge new-support2
2013-07-29 20:50:26 +02:00
Alessandro Ranellucci
51de3ce14f
Switch print_z to unscaled coordinates
2013-07-29 00:27:53 +02:00
Alessandro Ranellucci
9b582a11ff
Adopt XS containers everywhere (incomplete work)
2013-07-16 09:49:34 +02:00
Alessandro Ranellucci
13e3a9129c
Use Slic3r::ExPolygon::Collection for Layer->slices
2013-07-14 15:06:49 +02:00
Alessandro Ranellucci
f7967414e0
Store layer slices and region slices as XS data to save memory and make them shared across threads
2013-07-07 12:54:20 +02:00
Alessandro Ranellucci
015580629b
Removed wrong optimization causing possible extra retractions while moving in infill space
2013-06-20 19:43:53 +02:00
Alessandro Ranellucci
48d5d6de58
Typo
2013-06-03 12:29:45 +02:00
Alessandro Ranellucci
81bae56e92
Limit only_retract_when_crossing_perimeters to travel moves that are completely enclosed in the upper layer's slices so that we avoid visible traces on top layers. #1091
2013-06-03 12:25:32 +02:00
Alessandro Ranellucci
2275de9f0d
Factored out the layer height logic
2013-03-10 11:37:16 +01:00
Alessandro Ranellucci
a9090688f9
Refactor bridge flow to Slic3r::Flow::Bridge class
2013-02-27 10:43:50 +01:00
Alessandro Ranellucci
504962712b
Bugfix: when using low layer heights and support material, the contact regions were generated with a negative height. #1013
2013-02-23 17:40:38 +01:00
Alessandro Ranellucci
3eedd4bbed
Fixed regression in support material after recent flow refactoring. #1012
2013-02-23 16:08:29 +01:00
Alessandro Ranellucci
91bcfc8a74
Remove $Slic3r::flow and $Slic3r::first_layer_flow
2013-02-22 16:08:11 +01:00
Alessandro Ranellucci
9222526e03
Customizable number of interface layers for support material and raft
2013-02-03 17:23:50 +01:00
Alessandro Ranellucci
177f1a9bf0
New raft_layers option. #123
2013-01-28 14:12:01 +01:00
Alessandro Ranellucci
30d9b2e508
Refactoring: initialize all layers at once and avoid duplication of slicing height math. #637
2013-01-01 23:28:48 +01:00
Alessandro Ranellucci
d5537e7797
Enable retraction for support material too, but only when moving away from support islands. #831
2012-12-20 18:47:40 +01:00
Alessandro Ranellucci
0bff8ad576
Bugfix: some multimaterial files generated a fatal error
2012-11-05 15:59:31 +01:00
Alessandro Ranellucci
ccb49a8439
Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea)
2012-10-28 16:59:20 +01:00
