Alessandro Ranellucci
|
62bd33a766
|
Fixed regression causing fatal errors. #429
|
2012-06-09 15:53:14 +02:00 |
|
Alessandro Ranellucci
|
0c4b112718
|
Fixed regression preventing arcs to be generated at all (center detection is still buggy)
|
2012-06-07 19:53:27 +02:00 |
|
Alessandro Ranellucci
|
c0c53c4397
|
Fill gaps. #281
|
2012-06-07 15:31:51 +02:00 |
|
Alessandro Ranellucci
|
00c6b1bdf8
|
Bugfix: some thin walls still gave a fatal error. #416
|
2012-06-07 12:21:33 +02:00 |
|
Alessandro Ranellucci
|
0226039dfb
|
Fixed regression when cooling is enabled
|
2012-06-07 11:38:54 +02:00 |
|
Alessandro Ranellucci
|
caa32ab282
|
Fixed regression causing flow errors when using legacy config files. #421
|
2012-06-07 11:24:45 +02:00 |
|
Alessandro Ranellucci
|
709c444976
|
Fixed fatal error when using --first-layer-extrusion-width
|
2012-06-07 11:17:35 +02:00 |
|
Alessandro Ranellucci
|
5c9916dc75
|
Some basic ability to close holes in non-manifold models
|
2012-06-06 22:28:23 +02:00 |
|
Alessandro Ranellucci
|
85ef7ce665
|
Bugfix: many thin walls were not detected correctly. #313
|
2012-06-06 21:27:39 +02:00 |
|
Alessandro Ranellucci
|
fbfbfac2b6
|
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
|
2012-06-06 19:59:20 +02:00 |
|
Alessandro Ranellucci
|
2ccb443c2f
|
Bugfix: not retracting between infill of different islands using low infill densities. #242
|
2012-06-06 19:38:35 +02:00 |
|
Alessandro Ranellucci
|
58a696e666
|
Lift Z when changing layer too
|
2012-06-06 19:20:43 +02:00 |
|
Alessandro Ranellucci
|
8883df6692
|
Warn user when object couldn't be split
|
2012-06-06 19:00:34 +02:00 |
|
Alessandro Ranellucci
|
13e10abbbe
|
Fixed regression causing some models not to be sliced correctly. #410
|
2012-06-06 18:57:46 +02:00 |
|
Alessandro Ranellucci
|
c7af74884f
|
Legacy config files were not correctly supported
|
2012-06-06 18:47:11 +02:00 |
|
Alessandro Ranellucci
|
82dd3c7a3e
|
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
|
2012-06-06 18:05:03 +02:00 |
|
Alessandro Ranellucci
|
8a031fe501
|
New --first-layer-extrusion-width option. #385
|
2012-06-06 17:29:12 +02:00 |
|
Alessandro Ranellucci
|
d412820733
|
Update: preview area was not updating to the largest side of the build area
|
2012-06-06 16:18:41 +02:00 |
|
Alessandro Ranellucci
|
16b774603c
|
Accept either absolute or relative values for --first-layer-height. #151
|
2012-06-06 16:11:38 +02:00 |
|
Alessandro Ranellucci
|
896c7e952e
|
Renamed bottom_layer_speed to first_layer_speed for consistency
|
2012-06-06 15:52:21 +02:00 |
|
Alessandro Ranellucci
|
4a188f8566
|
Support for legacy config files containing bottom_layer_speed_ratio. #151
|
2012-06-06 15:48:14 +02:00 |
|
Alessandro Ranellucci
|
91ffb74429
|
Accept either absolute or relative values for --bottom-layer-speed. #151
|
2012-06-06 15:43:54 +02:00 |
|
Alessandro Ranellucci
|
aedb6cc35f
|
Accept both relative and absolute extrusion width values. #151
|
2012-06-06 15:23:34 +02:00 |
|
Alessandro Ranellucci
|
2e3c8241e4
|
Merge pull request #407 from beanz/simplify-check-manifoldness
Remove grep that is effectively repeated.
|
2012-06-05 01:57:45 -07:00 |
|
Josh McCullough
|
9da034a042
|
fixes #409
|
2012-06-05 10:55:02 +02:00 |
|
Mark Hindess
|
2689f49ef8
|
Remove grep that is effectively repeated.
|
2012-05-31 18:15:40 +01:00 |
|
Alessandro Ranellucci
|
ea83c562c1
|
Fixed regression caused by sequential printing code preventing skirt to extend past first layer. #396
|
2012-05-31 09:37:39 +02:00 |
|
Alessandro Ranellucci
|
3ef86ad6ff
|
Allow loading multiple files at once. #402
|
2012-05-31 09:26:30 +02:00 |
|
Alessandro Ranellucci
|
8aa20cd784
|
Fixed the "Export SVG..." menu item. #399
|
2012-05-30 12:06:01 +02:00 |
|
Alessandro Ranellucci
|
5eae22f8b0
|
Enforce prompt when overwriting G-code files. #398
|
2012-05-30 11:55:46 +02:00 |
|
Alessandro Ranellucci
|
949055d86c
|
Bump version number
|
2012-05-29 17:16:32 +02:00 |
|
Alessandro Ranellucci
|
fc1624531a
|
Releasing 0.8.2
|
2012-05-29 17:13:08 +02:00 |
|
Alessandro Ranellucci
|
99b265a89a
|
Fixed regression causing bad slicing
|
2012-05-29 17:12:00 +02:00 |
|
Alessandro Ranellucci
|
26051d12ef
|
Bugfix: fatal error when a non-manifold object is processed on a non-thraeded perl
|
2012-05-29 17:02:47 +02:00 |
|
Alessandro Ranellucci
|
09d4ab8470
|
Bump version number
|
2012-05-29 15:00:05 +02:00 |
|
Alessandro Ranellucci
|
63f8f4d710
|
Releasing 0.8.1
|
2012-05-29 14:55:33 +02:00 |
|
Alessandro Ranellucci
|
d8d2f73aff
|
Fixed regression causing fatal errors with many objects. #394
|
2012-05-29 14:54:20 +02:00 |
|
Alessandro Ranellucci
|
acf4f032be
|
Bump version number
|
2012-05-29 14:43:48 +02:00 |
|
Alessandro Ranellucci
|
af7ccb9fc1
|
Refactor resource paths
|
2012-05-29 14:19:14 +02:00 |
|
Alessandro Ranellucci
|
263806dd8c
|
Releasing 0.8.0
|
2012-05-29 13:28:21 +02:00 |
|
Alessandro Ranellucci
|
4db416773c
|
Fixed typos in bed temperature M-codes. #386
|
2012-05-29 09:40:42 +02:00 |
|
Alessandro Ranellucci
|
bc4b4a981b
|
Take extruder clearance radius into account when autopositioning
|
2012-05-29 09:38:53 +02:00 |
|
Alessandro Ranellucci
|
ce3e2d396e
|
Fixed regression preventing STL export from working. #387
|
2012-05-29 09:35:57 +02:00 |
|
Alessandro Ranellucci
|
e383d5e02d
|
Move struct format to constant
|
2012-05-28 20:29:51 +02:00 |
|
Alessandro Ranellucci
|
34e3dfdb08
|
Large memory savings (down to about 50%) for high-res input files
|
2012-05-28 19:58:27 +02:00 |
|
Alessandro Ranellucci
|
efdf266df1
|
Removed useless Polygon constructor and some cleanup
|
2012-05-23 11:51:20 +02:00 |
|
Alessandro Ranellucci
|
5a78111efa
|
Options to set extruder clearance for sequential printing and graphical preview of collisions
|
2012-05-23 11:47:52 +02:00 |
|
Alessandro Ranellucci
|
2c28d2f874
|
Bugfix: with 0 solid layers, no infill was generated at all on fist and last layer. #325
|
2012-05-22 12:24:48 +02:00 |
|
Alessandro Ranellucci
|
e7d609db12
|
Fix previous commit about slicing from smallest to tallest
|
2012-05-21 20:23:17 +02:00 |
|
Alessandro Ranellucci
|
e4b37db13f
|
Print objects from the smallest to the tallest to avoid extruder collisions (this applies when using the complete_objects setting)
|
2012-05-21 20:19:30 +02:00 |
|