Alessandro Ranellucci
|
cf32cd6510
|
Implement vibration limit using G4 pauses
|
2012-12-05 15:03:36 +01:00 |
|
Alessandro Ranellucci
|
f001374c6e
|
New implementation of the little inwards move before leaving a loop. #186
|
2012-12-05 11:31:35 +01:00 |
|
Alessandro Ranellucci
|
283809f5c2
|
No need for a role to identify small perimeters
|
2012-12-05 10:47:41 +01:00 |
|
Alessandro Ranellucci
|
ac6dc67e6a
|
Tidy
|
2012-12-05 01:12:50 +01:00 |
|
Alessandro Ranellucci
|
accc598eb5
|
Revert "Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186"
This reverts commit c57e94c065.
Conflicts:
lib/Slic3r/GCode.pm
|
2012-11-29 19:16:07 +01:00 |
|
Alessandro Ranellucci
|
b495e15d7f
|
Fix plater slowness after the introduction of the vertical projection
|
2012-11-29 19:13:52 +01:00 |
|
Alessandro Ranellucci
|
93310a6a81
|
Fix bounding_box_center()
|
2012-11-24 00:15:02 +01:00 |
|
Alessandro Ranellucci
|
116ab446e3
|
Show vertical projection instead of convex hull for objects with <= 2000 facets. #780
|
2012-11-24 00:13:04 +01:00 |
|
Alessandro Ranellucci
|
12873e973b
|
One more missing bit for gap_fill_speed
|
2012-11-23 18:37:47 +01:00 |
|
Alessandro Ranellucci
|
556e59bbe4
|
Last commit erroneously reverted gap fill speed
|
2012-11-23 17:41:15 +01:00 |
|
Alessandro Ranellucci
|
0f0992e39a
|
Speed for support material. #813
|
2012-11-23 17:20:26 +01:00 |
|
Alessandro Ranellucci
|
d6d96391a9
|
Avoid overextrusion when support material spacing is configured to < the extrusion spacing. #821
|
2012-11-23 17:15:52 +01:00 |
|
Alessandro Ranellucci
|
e7b307df02
|
Expose gap_fill_speed in GUI
|
2012-11-23 17:09:59 +01:00 |
|
Alessandro Ranellucci
|
5dba02fdeb
|
New separate speed setting for gap fill. #785
|
2012-11-23 11:25:02 +01:00 |
|
Alessandro Ranellucci
|
68e302fe27
|
Fix exporting G-code
|
2012-11-23 11:24:04 +01:00 |
|
Alessandro Ranellucci
|
21a6219b62
|
Disable vibration limit. #785
|
2012-11-23 11:14:06 +01:00 |
|
Alessandro Ranellucci
|
2abf2be781
|
New testing framework
|
2012-11-21 20:41:14 +01:00 |
|
Alessandro Ranellucci
|
8ae96a8868
|
Only apply vibration limit to gaps fill while it's not very mature to work with long segments
|
2012-11-21 19:27:38 +01:00 |
|
Alessandro Ranellucci
|
fc399d60e2
|
Raise the miter limit to avoid squaring corners too easily. #801
|
2012-11-20 17:43:20 +01:00 |
|
Alessandro Ranellucci
|
cd892fdce8
|
Connect zigzag gaps fill paths to benefit from simplification
|
2012-11-19 18:57:42 +01:00 |
|
Alessandro Ranellucci
|
e91320e031
|
Fix rotation for threaded perls
|
2012-11-19 18:31:41 +01:00 |
|
Alessandro Ranellucci
|
124a1fd84e
|
Raise default frequency limit to 25Hz
|
2012-11-19 18:03:49 +01:00 |
|
Alessandro Ranellucci
|
de8a845d81
|
Disable retraction for support material
|
2012-11-19 18:03:20 +01:00 |
|
Alessandro Ranellucci
|
5678cd562c
|
Fix preview after rotation in plater
|
2012-11-19 17:39:16 +01:00 |
|
Alessandro Ranellucci
|
99c942b5ea
|
Merge branch 'vibration-limit'
|
2012-11-19 15:54:50 +01:00 |
|
Alessandro Ranellucci
|
3c7321ab80
|
Bugfix: some retractions between objects/copies were skipped. #786
|
2012-11-19 15:34:52 +01:00 |
|
Alessandro Ranellucci
|
300734db38
|
Emit M106 S0 instead of M107 for Teacup
|
2012-11-19 15:30:55 +01:00 |
|
Alessandro Ranellucci
|
183736dd9a
|
Infill flow for bottom layer was calculated incorrectly when first_layer_height != layer_height
|
2012-11-19 12:37:05 +01:00 |
|
Alessandro Ranellucci
|
de0640603a
|
Append full config when --gcode-comments is enabled
|
2012-11-18 19:53:52 +01:00 |
|
Alessandro Ranellucci
|
a66e8e547d
|
Apply Douglas-Peucker to all paths before generating G-code
|
2012-11-18 18:00:33 +01:00 |
|
Alessandro Ranellucci
|
e119cee66c
|
Don't emit warnings on unknown options
|
2012-11-18 17:42:52 +01:00 |
|
Alessandro Ranellucci
|
c99ff0cfe2
|
Apply Douglas-Peucker to all paths before generating G-code
|
2012-11-18 17:38:08 +01:00 |
|
Alessandro Ranellucci
|
08700aa942
|
Keep bridge flow unchanged even with the new overlapping spacing
|
2012-11-18 15:44:47 +01:00 |
|
Alessandro Ranellucci
|
427e3c1720
|
Keep bridge flow unchanged even with the new overlapping spacing
|
2012-11-18 15:42:59 +01:00 |
|
Alessandro Ranellucci
|
7a87a76391
|
Refactor frequency limit to avoid processing G-code
|
2012-11-18 15:28:13 +01:00 |
|
Alessandro Ranellucci
|
008633f013
|
Working implementation of frequency limit
|
2012-11-18 12:23:11 +01:00 |
|
Alessandro Ranellucci
|
f3164594eb
|
More incomplete work
|
2012-11-18 11:33:53 +01:00 |
|
Alessandro Ranellucci
|
72007c4f6a
|
Rewrite frequency limiting code
|
2012-11-17 18:07:13 +01:00 |
|
Alessandro Ranellucci
|
600e951fd8
|
Completed vibration limit
|
2012-11-17 12:08:19 +01:00 |
|
Alessandro Ranellucci
|
96dd106f61
|
Initial work for limiting vibrations
|
2012-11-17 10:40:15 +01:00 |
|
Alessandro Ranellucci
|
8d557bee8c
|
Bugfix: AMF export was not working anymore. #799
|
2012-11-16 22:41:54 +01:00 |
|
Alessandro Ranellucci
|
7310cec087
|
Remove one more unused line
|
2012-11-16 22:09:32 +01:00 |
|
Alessandro Ranellucci
|
ed50aefa71
|
Remove unused code
|
2012-11-16 22:08:14 +01:00 |
|
Alessandro Ranellucci
|
ac5be309e3
|
Do not call merge_continuous_lines() anymore
|
2012-11-16 19:20:46 +01:00 |
|
Alessandro Ranellucci
|
aff0898f35
|
Typo
|
2012-11-16 18:24:09 +01:00 |
|
Alessandro Ranellucci
|
86f5cb8654
|
Previous commit about bridge spacing was incomplete
|
2012-11-16 18:10:09 +01:00 |
|
Alessandro Ranellucci
|
a81377d684
|
Apply overlap factor to bridges too
|
2012-11-16 13:18:06 +01:00 |
|
Alessandro Ranellucci
|
1c2bc94d5a
|
Bugfix: only_retract_when_crossing_perimeters might cause some missed retractions when printing multiple copies of the same object. #786
|
2012-11-16 12:39:55 +01:00 |
|
Alessandro Ranellucci
|
a1a12ffe8e
|
Allow setting top-solid-layers and bottom-solid-layers to 0 independently
|
2012-11-16 12:37:47 +01:00 |
|
Alessandro Ranellucci
|
06b475a4ed
|
Clone last_pos before storing it otherwise it will be translated. #786
|
2012-11-16 11:05:45 +01:00 |
|
Alessandro Ranellucci
|
b625c3b2b2
|
Simplify gaps fills to avoid some shaking
|
2012-11-16 10:47:42 +01:00 |
|
Alessandro Ranellucci
|
a5a0f32e19
|
Expose all SLIC3R_* environment variables as placeholders. #781
|
2012-11-16 10:07:30 +01:00 |
|
Alessandro Ranellucci
|
580e36eb25
|
Raise offset scale factor back to 100000 now that Clipper was updated
|
2012-11-15 10:09:29 +01:00 |
|
Alessandro Ranellucci
|
d3629a3a44
|
Require Math::Clipper 1.15. #779
|
2012-11-13 11:53:02 +01:00 |
|
Alessandro Ranellucci
|
93bb2c1056
|
Bugfix: fatal error when using brim and no skirt. #784
|
2012-11-07 23:06:32 +01:00 |
|
Alessandro Ranellucci
|
2e3110d2e4
|
Possible (or at least partial) workaround for the current Clipper segfault. #779
|
2012-11-07 15:23:01 +01:00 |
|
Alessandro Ranellucci
|
2ef90562ce
|
Fixed regression causing first two layers to be infilled with parallel lines
|
2012-11-06 22:16:01 +01:00 |
|
Alessandro Ranellucci
|
e21c806ee9
|
New wkt() method for debugging
|
2012-11-06 20:31:50 +01:00 |
|
Alessandro Ranellucci
|
1db614a5a9
|
Revert "Use G92 to apply Z offset. #486" #778
|
2012-11-06 20:04:44 +01:00 |
|
Alessandro Ranellucci
|
ab2b31672f
|
Fixed regression causing a long string between copies
|
2012-11-06 19:54:21 +01:00 |
|
Alessandro Ranellucci
|
0bff8ad576
|
Bugfix: some multimaterial files generated a fatal error
|
2012-11-05 15:59:31 +01:00 |
|
Alessandro Ranellucci
|
0a912c6316
|
Only apply min_skirt_length on bottom layer
|
2012-11-05 14:26:55 +01:00 |
|
Alessandro Ranellucci
|
68e1edab80
|
Require Math::Clipper 1.14 and increase scale factor for offset(). #720
|
2012-11-05 00:17:46 +01:00 |
|
Mark Hindess
|
705d6b3179
|
Quick fix for support material.
|
2012-11-02 22:39:08 +00:00 |
|
Alessandro Ranellucci
|
d67c07bd47
|
Fix typo causing incomplete honeycomb infill after recent refactoring
|
2012-11-01 18:32:35 +01:00 |
|
Alessandro Ranellucci
|
93a8391e18
|
Alternate gaps fill direction
|
2012-11-01 11:53:18 +01:00 |
|
Alessandro Ranellucci
|
37c0b45187
|
Detect gaps even after the desired number of perimeters has been generated
|
2012-11-01 11:51:52 +01:00 |
|
Alessandro Ranellucci
|
cb4ede7f9e
|
Do not pass the Print object to SVG::output anymore
|
2012-11-01 11:34:53 +01:00 |
|
Alessandro Ranellucci
|
554d10c854
|
Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects)
|
2012-10-31 19:08:29 +01:00 |
|
Alessandro Ranellucci
|
d4ccd39ad3
|
Minor code cleanup
|
2012-10-30 15:53:01 +01:00 |
|
Alessandro Ranellucci
|
92ab53868e
|
Remove unused methods
|
2012-10-30 15:49:11 +01:00 |
|
Alessandro Ranellucci
|
44d91774a6
|
Get rid of useless Slic3r::Fill instances
|
2012-10-30 15:38:17 +01:00 |
|
Alessandro Ranellucci
|
cec7bf815c
|
Get rid of the ExtrusionLoop objects in concentric filler
|
2012-10-30 15:29:13 +01:00 |
|
Alessandro Ranellucci
|
20e73face2
|
Get rid of max_print_dimension in filler objects
|
2012-10-30 15:09:54 +01:00 |
|
Alessandro Ranellucci
|
6c97e588b1
|
Don't require the print object in filler objects
|
2012-10-30 14:34:41 +01:00 |
|
Alessandro Ranellucci
|
5943114574
|
Only take layer_id instead of layer in filler objects
|
2012-10-30 14:25:48 +01:00 |
|
Alessandro Ranellucci
|
61047f0df5
|
Define perimeter/infill overlap over spacing instead of width and increase it slightly to compensate
|
2012-10-30 14:21:59 +01:00 |
|
Alessandro Ranellucci
|
610862a97f
|
Use the actual flow spacing for clipping concentric loops
|
2012-10-30 14:17:30 +01:00 |
|
Alessandro Ranellucci
|
0a5016a509
|
Cleaner usage of the PI constant
|
2012-10-30 14:15:48 +01:00 |
|
Alessandro Ranellucci
|
25d88bddff
|
Remove the change_layer method
|
2012-10-30 14:11:32 +01:00 |
|
Alessandro Ranellucci
|
52ed2c6ea4
|
Make flow_spacing required for ExtrusionLoop objects too
|
2012-10-30 14:07:50 +01:00 |
|
Alessandro Ranellucci
|
be7e211bb6
|
Make flow_spacing required for ExtrusionPath objects
|
2012-10-30 14:07:01 +01:00 |
|
Alessandro Ranellucci
|
37637c34f5
|
Refactor shortest_path
|
2012-10-30 13:59:33 +01:00 |
|
Alessandro Ranellucci
|
4c6fe0b3d4
|
Fixed regression preventing lift to work correctly
|
2012-10-30 10:45:55 +01:00 |
|
Alessandro Ranellucci
|
887634e1e2
|
Use G92 to apply Z offset. #486
|
2012-10-29 19:54:04 +01:00 |
|
Alessandro Ranellucci
|
709cbc1c15
|
Fixed regression causing support material generation to fail under threaded perls
|
2012-10-29 19:38:40 +01:00 |
|
Alessandro Ranellucci
|
df4dcf0534
|
Move by 30° instead of 45° when completing an external loop. #186
|
2012-10-29 11:21:41 +01:00 |
|
Alessandro Ranellucci
|
9b94a661d9
|
Fixed regression causing too much clipping at the endpoints of loops
|
2012-10-29 11:20:27 +01:00 |
|
Alessandro Ranellucci
|
e9ae62a9d1
|
New --min-skirt-length option. #269
|
2012-10-29 11:17:57 +01:00 |
|
Alessandro Ranellucci
|
c25e54a830
|
Expose perimeter/infill/support material extrusion widths in G-code comments
|
2012-10-29 00:31:25 +01:00 |
|
Alessandro Ranellucci
|
f2389682b6
|
Factor out some hard-coded settings
|
2012-10-29 00:23:33 +01:00 |
|
Alessandro Ranellucci
|
1ecadc10fb
|
Fixed regression causing one perimeter to be generated even when perimeters where set to 0. #759
|
2012-10-28 19:27:54 +01:00 |
|
Alessandro Ranellucci
|
8da4151c6d
|
Fix regression causing skirt to be printed at Z = 0 after a recent commit
|
2012-10-28 19:24:24 +01:00 |
|
Alessandro Ranellucci
|
c57e94c065
|
Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186
|
2012-10-28 19:15:34 +01:00 |
|
Alessandro Ranellucci
|
ecd054a57c
|
Don't emit T0 at the beginning of the file, so that it's generated automatically just right before starting the print
|
2012-10-28 17:29:01 +01:00 |
|
Alessandro Ranellucci
|
935173047a
|
Allow [print_center_X] and [print_center_Y] syntax for all coordinates settings (including bed_center etc.) and [temperature_0], [temperature_1] etc. for all index-based settings
|
2012-10-28 17:23:35 +01:00 |
|
Alessandro Ranellucci
|
ccb49a8439
|
Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea)
|
2012-10-28 16:59:20 +01:00 |
|
Alessandro Ranellucci
|
b5bd216f5c
|
Do not combine infill for bottom layer
|
2012-10-28 14:23:47 +01:00 |
|
Alessandro Ranellucci
|
f35cdef2aa
|
Renamed ExtrusionPath->depth_layers to height
|
2012-10-28 14:22:51 +01:00 |
|
Alessandro Ranellucci
|
2796041a6c
|
Bugfix: --top-solid-layers was ignored. #769
|
2012-10-28 12:52:53 +01:00 |
|