3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,685 Commits 1 Branch 1 Tag 249 MiB
510c2092df
Commit Graph

1461 Commits

Author SHA1 Message Date
Alessandro Ranellucci
8f77d3b945 Increase spacing for bridge traces. #1090 2013-05-17 15:03:42 +02:00
Alessandro Ranellucci
8e2063397a Merge branch 'opengl' 2013-05-17 14:17:02 +02:00
Alessandro Ranellucci
5c74fd095b Very basic implementation of 3D preview - install Wx::GLCanvas to get it working 2013-05-17 14:14:33 +02:00
Alessandro Ranellucci
228c84ddc1 Use glDrawArrays() 2013-05-16 13:42:19 +02:00
Alessandro Ranellucci
09989ab8bd Fix regression in --gcode-arcs 2013-05-16 12:54:38 +02:00
Alessandro Ranellucci
521d668712 Reduce overlap for bridges. #1090 2013-05-16 12:34:24 +02:00
Alessandro Ranellucci
55071e544f Fix brim spacing. #1174 2013-05-16 12:29:46 +02:00
Alessandro Ranellucci
fc1a23f5b0 Quick and dirty OpenGL mockup 2013-05-16 12:09:01 +02:00
Alessandro Ranellucci
bff31d7002 Fix split_mesh() not working anymore since analyze() is lazy 2013-05-16 11:25:15 +02:00
Alessandro Ranellucci
90280fe63b Little fix for bridge rendering in SectionCut 2013-05-14 20:11:05 +02:00
Alessandro Ranellucci
967d567db0 Fix bridge rendering in SectionCut 2013-05-14 19:48:52 +02:00
Alessandro Ranellucci
632652d924 Unfinished work for displaying bridge paths in section cuts 2013-05-14 19:48:47 +02:00
Alessandro Ranellucci
06ad6b70f8 Bugfix: scaling object from the plater applied scale factor over the factor used in the previous slicing job. #1075 2013-05-14 16:31:50 +02:00
Alessandro Ranellucci
7eff002e21 Memory and speed optimization: only study meshes when needed 2013-05-14 14:47:00 +02:00
Alessandro Ranellucci
e51dbb994d One more speed optimization in STL.pm 2013-05-14 14:17:46 +02:00
Alessandro Ranellucci
745cea8e6c One more little speed optimization in STL.pm 2013-05-14 14:12:32 +02:00
Alessandro Ranellucci
25bafe7ff1 Memory (and maybe speed?) optimization in STL reader 2013-05-14 13:54:25 +02:00
Alessandro Ranellucci
4121a7ece5 Set support material enforce layers to 0 when spiral printing 2013-05-14 13:54:24 +02:00
Mark Hindess
7979dd9e9c Avoid expensive TriangleMesh BUILD method during clone. 
Gives 6% speedup and uses less memory when slicing yoda.stl and should
give significantly bigger speedup on more complex models and plates.
 2013-05-13 21:27:55 +01:00
Alessandro Ranellucci
a86c48d85c Disable retract on layer change when doing spiral vase; also check that we're printing a single-material object 2013-05-13 21:55:34 +02:00
Alessandro Ranellucci
a73020c10e Faster implementation of concentric infill, with loop order reversed so that smaller loops will be printed at the end. #898 2013-05-13 21:22:57 +02:00
Alessandro Ranellucci
ccdb29ddc9 New --spiral-vase option to continously raise Z when printing single-walled vases. #997 2013-05-13 20:15:45 +02:00
Alessandro Ranellucci
baa1a8c736 Move Slic3r::Test::GCodeReader to Slic3r::GCode::Reader 2013-05-13 20:14:33 +02:00
Alessandro Ranellucci
ece6dd8a0b Only make the inwards move when we have more than one perimeter 2013-05-13 19:35:42 +02:00
Alessandro Ranellucci
7c89476602 Move fan_always_on in the Enable options group. #1166 2013-05-13 18:33:44 +02:00
Alessandro Ranellucci
1aae311148 Fix menus for --no-plater. #1112 2013-05-13 18:30:12 +02:00
Alessandro Ranellucci
f6dc712158 Bugfix: most of the File menu items didn't work with --no-plater. #1112 2013-05-13 18:22:47 +02:00
Alessandro Ranellucci
d2425748a3 Code cleanup and remove arc compensation code 2013-05-13 13:18:58 +02:00
Alessandro Ranellucci
5efa409c7c Move gap fill to its own method 2013-05-13 13:07:22 +02:00
Alessandro Ranellucci
1d94618c5e Correctly detect external hole perimeters 2013-05-13 12:52:57 +02:00
Alessandro Ranellucci
ca549cd2fe Perimeters refactoring complete 2013-05-11 21:30:26 +02:00
Alessandro Ranellucci
67b24efd49 Incomplete work - still wrong order 2013-05-11 21:05:29 +02:00
Alessandro Ranellucci
df62c25c8f One more offset_ex() optimization 2013-05-11 09:39:38 +02:00
Alessandro Ranellucci
0e100827f8 Avoid useless looping and usage of ExPolygons 2013-05-11 09:35:33 +02:00
Alessandro Ranellucci
6e216e2fd9 New traverse_pt() 2013-05-11 09:24:48 +02:00
Alessandro Ranellucci
7953dcfb12 Merge branch 'better-brim' 
Conflicts:
	lib/Slic3r/Geometry/Clipper.pm
	lib/Slic3r/Print.pm
 2013-05-11 09:19:23 +02:00
Alessandro Ranellucci
bac5093de4 Alwyas apply disable_fan_first_layers, even if cooling is disabled, since fan_always_on is applied in that case as well. Update descriptive text and have it appear in case of disabled auto cooling. #1166 2013-05-10 15:09:27 +02:00
Alessandro Ranellucci
6b8894cf9a Rename ex_int_offset2 to offset2_ex 2013-05-10 13:56:29 +02:00
Alessandro Ranellucci
993fcd9182 Revert "Smarter ordering of brim loops. #687" until new Math::Clipper is out 
This reverts commit 4aad2f6243.
 2013-05-10 13:51:28 +02:00
Alessandro Ranellucci
5bf3f5f5e4 Make sure brim paths don't overlap 2013-05-10 13:47:40 +02:00
Alessandro Ranellucci
4aad2f6243 Smarter ordering of brim loops. #687 2013-05-09 14:52:56 +02:00
Alessandro Ranellucci
855ba90332 New script to generate vertical section cuts from any given G-code file 2013-05-02 11:42:51 +02:00
Alessandro Ranellucci
dde3e6e870 Disable Net::DBus. #1015 2013-04-29 15:57:07 +02:00
Alessandro Ranellucci
c2301c5796 Don't extend solid layers when fill density is 0 2013-04-29 15:55:50 +02:00
Alessandro Ranellucci
f7153d67d0 Make preset placeholders available in Quick Slice too. #921 2013-04-28 23:26:50 +02:00
Alessandro Ranellucci
bde730a611 Little fix in SectionCut.pm 2013-04-28 11:31:03 +02:00
Alessandro Ranellucci
6db8afe36d New option to remember last output directory. #698 2013-04-27 21:07:30 +02:00
Alessandro Ranellucci
f5bda326b8 Version check. #1006 2013-04-27 20:55:43 +02:00
Alessandro Ranellucci
bc9ff47d3f New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline 2013-04-27 15:02:13 +02:00
Alessandro Ranellucci
6842114d3d Fix for rectilinear infill failing in plates with new caching 2013-04-26 17:14:30 +02:00
Alessandro Ranellucci
24fd152ce4 Bugfix: cooling buffer was broken. #1149 2013-04-24 11:19:08 +02:00
Miro Hrončok
55c413627f Bugfix: configuration wizard crash 2 #1077 2013-04-23 16:17:43 +03:00
Mark Hindess
8c26f0da30 Avoid memory leaks by breaking reference cycle: Print -> Fill -> Print 2013-04-18 22:49:43 +01:00
Mark Hindess
aac2c45450 Avoid merging meshes when there is only one mesh to merge. 
When slicing yoda.stl it reduces peak memory usage by 5% and speeds up
slicing by 13%.
Further optimization using a simple proxy to implement the two methods
(size/extends) needed on the merge meshes is also possible and
undoubtedly worthwhile.
 2013-04-18 19:50:05 +01:00
Mark Hindess
407de02fe4 Use binary search for get_layer_range. 
Gives a 13% speed up on Teethy_Tiki.stl (thing:49334) with default settings
on my laptop.
When $self->layers->[0]->slice_z == $min_z the returned $min_layer value is
0 rather than the (incorrect?) -1 returned by the old code.
 2013-04-18 19:29:05 +01:00
Alessandro Ranellucci
4e6c58f749 TYpo 2013-04-18 19:49:02 +02:00
Alessandro Ranellucci
17f76c4951 Move bridge detection to its own method 2013-04-18 18:43:46 +02:00
Alessandro Ranellucci
e088d9b3f7 Cache Slic3r::Fill object 2013-04-18 18:40:59 +02:00
Alessandro Ranellucci
312bb285a0 Fix initialization of Rectilinear filler 2013-04-18 18:37:46 +02:00
Alessandro Ranellucci
c46bfc71b4 Merge branch 'master' into boost-optimizations 2013-04-18 17:48:46 +02:00
Alessandro Ranellucci
01bd9040f5 Fix syntax for ex_int_offset2() 2013-04-18 17:46:13 +02:00
Alessandro Ranellucci
b160feacfd Merge branch 'master' into clipper-optimizations 2013-04-18 17:36:42 +02:00
Alessandro Ranellucci
850690cf79 Minor optimization 2013-04-18 17:36:06 +02:00
Alessandro Ranellucci
430c825918 Align rectilinear and line infill across layers (new implementation). #712 2013-04-18 17:34:21 +02:00
Alessandro Ranellucci
bd3384525e Revert "Align rectilinear and line infill across layers. #712" 
This reverts commit a0a54ea706.
 2013-04-15 11:33:24 +02:00
Alessandro Ranellucci
a0a54ea706 Align rectilinear and line infill across layers. #712 2013-04-11 19:36:49 +02:00
Alessandro Ranellucci
94ed6cd239 Always move Z at travel speed. #1093 2013-04-08 22:23:51 +02:00
Jesse Vincent
7ec6332141 split apart the math in nearest_point_index and short-circuit if we know the candidate is no good 2013-04-07 19:53:15 -04:00
Jesse Vincent
e8ca1e59a6 no functional change. only return from one place for clarity 2013-04-07 19:44:32 -04:00
Jesse Vincent
da0e67a891 Only look up $point's X and Y once, rather than once on every pass through the loop. 
(Those lookups are expensive)
 2013-04-07 18:28:08 -04:00
Jesse Vincent
3e8c5804fe Inline comparable_distance_between_points 
It was called on an incredibly hot codepath from a single place. At 12313276 calls
on my test .stl, the sub call overhead alone was a significant perf hit.
 2013-04-07 18:13:40 -04:00
Jesse Vincent
060d2da7fe Small optimization on an incredibly hot codepath. 2013-04-07 18:01:15 -04:00
Alessandro Ranellucci
7e51cbcf69 Allow 0.1mm slots. #959 #1056 2013-04-04 01:24:40 +02:00
Alessandro Ranellucci
b4be61b703 Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071 2013-04-04 01:17:44 +02:00
Alessandro Ranellucci
a563801304 Merge branch 'master' of github.com:alexrj/Slic3r 2013-04-04 01:15:46 +02:00
Alessandro Ranellucci
3afeb5c7b5 Second layer commands were written multiple times 2013-04-04 00:52:11 +02:00
Alessandro Ranellucci
b725847a51 Bugfix: configuration wizard led to crash with simple mode. #1077 2013-04-03 19:26:59 +02:00
Alessandro Ranellucci
88e70a59c7 Don't wipe if option is disabled 2013-04-03 19:08:12 +02:00
Alessandro Ranellucci
d089d2b2d4 Bugfix: crash introduced by wipe 2013-04-03 19:06:33 +02:00
Devin Grady
e602aad998 inspired by f5e48a3, a seems to work to fix 1076 2013-04-01 22:12:51 -05:00
Alessandro Ranellucci
bf809d1fd0 Use linestring_length() from Boost 2013-03-31 19:50:22 +02:00
Alessandro Ranellucci
1187f4846d Some Clipper optimizations 2013-03-31 19:40:25 +02:00
Alessandro Ranellucci
0d6ff22e19 Merge branch 'wipe' 2013-03-31 11:36:04 +02:00
Alessandro Ranellucci
04d2231901 Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049 2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
7f23e72a10 Display preview for small files too. #929 2013-03-30 00:52:45 +01:00
Alessandro Ranellucci
33a4ec660d better handling of too-small and too-short models #929. 
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
 2013-03-30 00:47:13 +01:00
Alessandro Ranellucci
ac2356f66a Don't crash at the end of empty prints. #1042 2013-03-30 00:36:14 +01:00
Alessandro Ranellucci
7b7c9f6330 Launch even if config is corrupted. #1067 2013-03-30 00:30:21 +01:00
Alessandro Ranellucci
f5e48a306d Bugfix: support material and brim didn't work correctly. Includes unit test. #1074 2013-03-30 00:21:09 +01:00
Alessandro Ranellucci
d4119b0eb1 Better bridge direction detection. #1068 2013-03-29 23:49:58 +01:00
Alessandro Ranellucci
5beb2187d3 Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068 2013-03-29 19:24:08 +01:00
Alessandro Ranellucci
1b79b1cb20 Refactoring: use the clone() method for inflating Surface objects 2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
e563c62094 Replace SetValue with ChangeValue to avoid wxWidgets to fire useless events 2013-03-29 18:56:34 +01:00
Alessandro Ranellucci
d2b451d9a1 Merge branch 'master' into wipe 2013-03-26 16:28:01 +01:00
Alessandro Ranellucci
aae9625a13 Bugfix: solid-infill-below-area wasn't ignored when fill_density = 0, causing solid layers here and there. #1049 2013-03-26 15:47:40 +01:00
Alessandro Ranellucci
2f046799f2 Removed offset() method from Slic3r::Polygon because it only works with ccw polygons 2013-03-26 14:03:24 +01:00
Alessandro Ranellucci
4c41f6c462 Safer safety_offset() for ExPolygons 2013-03-26 13:57:37 +01:00
Alessandro Ranellucci
843a700e96 Fixes for wipe 2013-03-25 23:06:18 +01:00
Alessandro Ranellucci
4cb36fcbe2 Remove cooling checkbox from simple mode 2013-03-24 21:28:16 +01:00
Alessandro Ranellucci
6bc5de0b5d Allow custom ranges with layer_height = 0 2013-03-24 15:26:55 +01:00