Joseph Lenox
90811f6736
Fix for issue #2526 , changed to GET.
2015-01-12 11:56:54 -06:00
Alessandro Ranellucci
9ec7b43ca1
Merge branch 'master' into sender
...
Conflicts:
lib/Slic3r/GUI/Tab.pm
2015-01-08 22:47:43 +01:00
Alessandro Ranellucci
9f4f711017
Disable the OctoPrint test button when LWP::UserAgent is not available
2015-01-08 21:37:00 +01:00
Alessandro Ranellucci
24daa50bfd
Button for testing OctoPrint connectivity. #2509
2015-01-08 21:34:51 +01:00
Alessandro Ranellucci
47e4e8bb66
Option to use volumetric E values. #1746
2015-01-05 19:39:10 +01:00
Alessandro Ranellucci
3ab4d4b094
Merge branch 'master' into sender
2015-01-04 19:36:28 +01:00
Alessandro Ranellucci
0775960b9f
Minor reordering of options
2015-01-04 19:20:13 +01:00
Alessandro Ranellucci
cbc0e270b7
Nicer configuration fields for USB/Serial connection
2015-01-04 19:14:54 +01:00
Alessandro Ranellucci
2c0d216c1a
More work on print controller
2015-01-03 23:25:55 +01:00
Alessandro Ranellucci
69da8b0999
Use borderless buttons for save/delete in presets management (better look on wxOSX with 3.0.0)
2015-01-01 17:14:57 +01:00
Alessandro Ranellucci
6896e53078
Octoprint -> OctoPrint
2014-12-29 12:49:32 +01:00
Alessandro Ranellucci
242dc17680
Minor improvements to Octoprint integration
2014-12-29 11:45:09 +01:00
Alessandro Ranellucci
b468e68c59
Bonjour autodiscovery of the Octoprint instances in local network. #1826
2014-12-28 18:49:52 +01:00
Alessandro Ranellucci
efe7d5f857
Integration with Octoprint. #1826
2014-12-28 01:30:05 +01:00
Alessandro Ranellucci
53e8699765
Prepend option category in the unsaved changes dialog
2014-12-27 14:38:06 +01:00
Alessandro Ranellucci
dbbc6e7e55
Update plater preset selectors when dismissing unsaved changes
2014-12-25 18:52:27 +01:00
Alessandro Ranellucci
70601eeb51
Tell what options were changed when prompting user for saving a modified preset. Also, check whether the preset was actually modified by performing a proper idempotent diff. #2165
2014-12-25 17:35:31 +01:00
Alessandro Ranellucci
350d634433
Enable extruder_offset configuration for first extruder. #2224
2014-12-24 00:34:17 +01:00
Alessandro Ranellucci
25bc8e6f29
Smarter automatic disabling of GUI fields + reordering of Print Settings pages + minor adjustments to tooltips
2014-12-23 20:47:11 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
7a7d00c8d6
Rename solid_fill_pattern to external_fill_pattern and clarify tooltip
2014-11-27 00:38:05 +01:00
Alessandro Ranellucci
ff9b53260d
New experimental feature for pressure management. Credits to @llluis for the original implementation. #1203 #1677 #2018
2014-11-24 18:22:39 +01:00
Alessandro Ranellucci
399fc519e6
Leave the Spiral Vase checkbox always enabled but prompt user when incompatible options are set. This should be more user-friendly than blindly disabling the Spiral Vase checkbox. #2360
2014-11-22 22:52:12 +01:00
Alessandro Ranellucci
24d67c42c6
Bugfix: configuration wizard was broken. #2210
2014-09-23 20:00:51 +02:00
Alessandro Ranellucci
321b70115b
Bugfix: changes in extruder count in GUI were not propagating to the rest of the GUI
2014-09-21 15:29:52 +02:00
Alessandro Ranellucci
678112b926
Bugfix: spiral vase checkbox couldn't be disabled under some circumstances
2014-08-08 17:18:41 +02:00
Alessandro Ranellucci
f260373336
Bugfix: GUI options weren't enabled/disabled upon preset change
2014-08-08 01:40:34 +02:00
Alessandro Ranellucci
d8b1eff62f
Enable min_fan_speed and disable_fan_first_layers when fan_always_on is checked
2014-07-01 21:58:57 +02:00
Alessandro Ranellucci
a06fad9e13
Enable/disable GUI controls according to the others in order to guide the user through option dependency
2014-07-01 18:18:23 +02:00
Alessandro Ranellucci
04b67f0cb0
Refactored OptionsGroup class for cleaner OOP model and cleaner event model
2014-07-01 16:42:12 +02:00
Alessandro Ranellucci
adf3d615bd
Fix Print preset being dirty at load time
2014-06-25 11:45:39 +02:00
Alessandro Ranellucci
3173e11e1f
Bugfix: object steps were incorrectly invalidated. #2102
2014-06-17 20:33:29 +02:00
Alessandro Ranellucci
afb7e675b8
Set preset dirty after setting bed shape
2014-06-17 00:30:44 +02:00
Alessandro Ranellucci
928335f186
Removed print_center option (but left --print-center from CLI)
2014-06-16 23:58:45 +02:00
Alessandro Ranellucci
d6d796fdd4
Finished implementing bed shape configuration within wizard
2014-06-16 22:45:13 +02:00
Alessandro Ranellucci
4fe2128fc4
Initial work for custom bed shape
2014-06-16 01:49:49 +02:00
Alessandro Ranellucci
3d8c8fa46e
Import wxTheApp
2014-06-14 19:59:59 +02:00
Alessandro Ranellucci
ddac2d1570
Merged SkeinPanel into MainFrame
2014-06-14 19:54:18 +02:00
Alessandro Ranellucci
e3e69251cb
New XY Size Compensation option. #581 #56
2014-06-10 13:28:57 +02:00
Alessandro Ranellucci
3599bd0bae
Distinct extrusion width for external perimeters
2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
88a2e5c791
Typo seal -> seam :-)
2014-05-24 22:10:28 +02:00
Alessandro Ranellucci
a3bd1b5302
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
8ca352eb62
Separate speed option for support material interface. #2009
2014-05-21 15:21:20 +02:00
Alessandro Ranellucci
85b0a4376a
Use last extruder's settings when adding new ones. #1997
2014-05-20 23:37:17 +02:00
Alessandro Ranellucci
0b0ec7be37
Fixed regression causing bad loading of multi-extruder values in GUI. #1984
2014-04-28 22:31:29 +02:00
Alessandro Ranellucci
ce9cf4d964
Don't put supports under bridges and potential bridges
2014-04-26 17:19:50 +02:00
Alessandro Ranellucci
c3bb8a69db
Bugfix: crash when extending an array option by 2+ positions. #1908
2014-04-19 16:38:28 +02:00
Alessandro Ranellucci
33ade1328f
Fix regression causing profile names to be listed in random order. #1864
2014-04-06 22:45:40 +02:00
Alessandro Ranellucci
c7a96a3113
Merge pull request #1881 from sapir/master
...
Disable some calls to on_presets_changed to speed up switching profiles
2014-04-06 12:52:05 +02:00
Alessandro Ranellucci
a6dd68a2a6
Bugfix: crash when setting number of extruders. #1876
2014-04-05 09:54:43 +02:00
Y. Sapir
576d02a20d
Make set_dirty ignore changes that don't do anything.
2014-03-30 00:23:35 +03:00
Y. Sapir
09d7d9b034
Remove call to on_presets_changed from Tab Page's on_change.
...
(set_dirty is called which handles it anyway.)
2014-03-30 00:21:57 +03:00
Alessandro Ranellucci
071097d3f1
Fix extruder assignment and tests
2014-03-27 00:01:33 +01:00
Alessandro Ranellucci
0ff33f47f1
Fix the extruder override logic. All role-based extruder options now default to 0, meaning no override is defined and the default (inherited) extruder is used. The default extruder option does not use the shortcut logic anymore (it was thus moved to be a CLI-specific logic)
2014-03-26 00:08:15 +01:00
Alessandro Ranellucci
2e6213fea6
Prevent crash when changing number of extruders
2014-03-25 19:21:44 +01:00
Alessandro Ranellucci
fed8783e30
New commands for exporting/importing full config bundles. Useful for printer vendors. #1365
2014-03-25 14:04:01 +01:00
Alessandro Ranellucci
432a87e73d
New option for forcing the generation of interface shells. #1847
2014-03-25 01:11:28 +01:00
Alessandro Ranellucci
67f3e9962b
Prevent user from saving a preset with the "- default -" name. #1717
2014-03-23 21:40:45 +01:00
Alessandro Ranellucci
9fb62e671f
Adapt GUI to new XS Config
2013-12-22 01:27:09 +01:00
Alessandro Ranellucci
beb7939e22
Rename standby_temperature to ooze_prevention. #1523
2013-11-15 16:01:15 +01:00
Alessandro Ranellucci
33e160c1ed
Automatically save presets after running the wizard
2013-11-11 21:45:58 +01:00
Alessandro Ranellucci
bcc061176c
New option to use G10/G11 for firmware-controlled retraction. #1494
2013-10-27 16:59:18 +01:00
Alessandro Ranellucci
991bc8ae3d
Partial work for implementing a standby temperature option
2013-09-18 17:45:02 +02:00
Alessandro Ranellucci
7d09f17810
Reflect max_fan_speed in cooling textual description. #1439
2013-09-16 10:09:39 +02:00
Alessandro Ranellucci
99816e07a6
New --first-layer-acceleration option
2013-08-09 14:30:43 +02:00
Alessandro Ranellucci
913f401280
Merge new-support2
2013-07-29 20:50:26 +02:00
Alessandro Ranellucci
f455ecb7da
Rename adjust_overhang_flow to overhangs
2013-07-06 11:35:40 +02:00
Alessandro Ranellucci
606d856af8
Lower case option group titles
2013-07-06 02:46:09 +02:00
Alessandro Ranellucci
b857d79604
Move spiral_vase to vertical shells section
2013-07-05 22:23:45 +02:00
Alessandro Ranellucci
f8ae8d3e8d
New option to disable overhang flow
2013-07-05 22:12:58 +02:00
Alessandro Ranellucci
282c751b0f
New option for disabling thin wall detection
2013-07-05 22:10:43 +02:00
Alessandro Ranellucci
0a7e0ffecf
New options: start_perimeters_at_concave_points start_perimeters_at_non_overhang
2013-07-05 22:06:58 +02:00
Alessandro Ranellucci
362232ada4
New Quality section in GUI
2013-07-05 21:57:56 +02:00
Alessandro Ranellucci
f0440bede4
Move infill_every_layers infill_only_where_needed into their own "Reducing Printing Time" section
2013-07-05 21:55:01 +02:00
Alessandro Ranellucci
ccdb29ddc9
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
2013-05-13 20:15:45 +02:00
Alessandro Ranellucci
7c89476602
Move fan_always_on in the Enable options group. #1166
2013-05-13 18:33:44 +02:00
Alessandro Ranellucci
bac5093de4
Alwyas apply disable_fan_first_layers, even if cooling is disabled, since fan_always_on is applied in that case as well. Update descriptive text and have it appear in case of disabled auto cooling. #1166
2013-05-10 15:09:27 +02:00
Alessandro Ranellucci
0d6ff22e19
Merge branch 'wipe'
2013-03-31 11:36:04 +02:00
Alessandro Ranellucci
7b7c9f6330
Launch even if config is corrupted. #1067
2013-03-30 00:30:21 +01:00
Alessandro Ranellucci
ec5f0635f7
Add wipe in GUI
2013-03-18 21:20:32 +01:00
Alessandro Ranellucci
35bd5a3423
New --solid-infill-extrusion-width option
2013-03-17 00:02:31 +01:00
Alessandro Ranellucci
cf5adca928
New --resolution option to simplify input models
2013-03-16 19:58:34 +01:00
Alessandro Ranellucci
db2e76a0df
New option to change perimeter order. #534
2013-03-16 18:56:49 +01:00
Alessandro Ranellucci
2942485a94
New option to make infill before perimeters. #1039
2013-03-10 18:15:44 +01:00
Alessandro Ranellucci
e9c7460c11
New --bridge-acceleration option
2013-03-09 20:31:09 +01:00
Alessandro Ranellucci
460e169c67
New option to disable retraction on layer change
2013-03-09 20:05:43 +01:00
Alessandro Ranellucci
9247b3e9f4
New --no-plater and --gui-mode options. #604
2013-03-09 16:43:09 +01:00
Alessandro Ranellucci
af50272b3b
Refactor simple mode definitions to dedicated SimpleTab classes
2013-03-09 16:27:18 +01:00
Alessandro Ranellucci
5477d66902
Advertise the expert mode in simple mode
2013-03-09 14:55:07 +01:00
Alessandro Ranellucci
46f35e39f6
Some more tweaks
2013-03-08 23:34:57 +01:00
Alessandro Ranellucci
0748e088a0
Reorder options in simple mode
2013-03-08 23:07:14 +01:00
Alessandro Ranellucci
84f4f098ca
Fix cooling and load in simple-mode. #1001
2013-03-08 22:58:28 +01:00
Alessandro Ranellucci
b901e1f6c8
Merge branch 'master' into simple-mode
2013-03-08 22:28:13 +01:00
Alessandro Ranellucci
97e864699e
New top-infill-extrusion-width option
2013-03-07 16:00:58 +01:00
Alessandro Ranellucci
cac79c0575
New option to only infill where strictly needed for supporting ceilings
2013-02-09 23:36:32 +01:00
Alessandro Ranellucci
8efe46e58d
New option to enforce support material on a given number of layers to improve adhesion of objects with poor footprint
2013-02-04 15:48:57 +01:00
Alessandro Ranellucci
9222526e03
Customizable number of interface layers for support material and raft
2013-02-03 17:23:50 +01:00
Alessandro Ranellucci
177f1a9bf0
New raft_layers option. #123
2013-01-28 14:12:01 +01:00
Alessandro Ranellucci
48e00a4c40
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Print.pm
lib/Slic3r/SVG.pm
2013-01-12 19:00:18 +01:00
Alessandro Ranellucci
32fd58d531
Acceleration control. #185
2013-01-10 15:29:40 +01:00
Alessandro Ranellucci
7239ca18c1
Simple mode
2013-01-03 15:49:20 +01:00
Alessandro Ranellucci
e59ed7efb7
New toolchange_gcode option. #547
2012-12-23 16:29:08 +01:00
Alessandro Ranellucci
25960a33e0
Put vibration limit back in GUI
2012-12-05 15:08:17 +01:00
Alessandro Ranellucci
0f0992e39a
Speed for support material. #813
2012-11-23 17:20:26 +01:00
Alessandro Ranellucci
e7b307df02
Expose gap_fill_speed in GUI
2012-11-23 17:09:59 +01:00
Alessandro Ranellucci
21a6219b62
Disable vibration limit. #785
2012-11-23 11:14:06 +01:00
Alessandro Ranellucci
96dd106f61
Initial work for limiting vibrations
2012-11-17 10:40:15 +01:00
Alessandro Ranellucci
e9ae62a9d1
New --min-skirt-length option. #269
2012-10-29 11:17:57 +01:00
Alessandro Ranellucci
deea02b444
Descriptive textual feedback for cooling settings
2012-10-28 12:43:41 +01:00
Alessandro Ranellucci
667d88603e
Reorder some options using the more compact layout
2012-10-25 12:37:02 +02:00
Alessandro Ranellucci
cee3864fc9
Independently set number of top/bottom solid layers. #676
2012-10-25 12:21:04 +02:00
Alessandro Ranellucci
bbd7765f40
Refactored the options group building to allow for more flexible layouts
2012-10-25 11:24:56 +02:00
Alessandro Ranellucci
1627268fd4
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
2012-10-24 11:49:31 +02:00
Alessandro Ranellucci
28b56ae840
Force unfocusing of all input fields when saving a preset, otherwise the currently focused one might be ignored. #750 #624
2012-10-22 16:03:08 +02:00
Alessandro Ranellucci
ab7697ec1c
New option to force a solid layer every given number of layers. #617
2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
cc8d8bd26f
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
README.markdown
lib/Slic3r/Config.pm
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
slic3r.pl
2012-09-12 16:04:16 +02:00
Alessandro Ranellucci
0c22250740
New option to disable retraction when moving between infill paths inside the same island. #29
2012-08-25 16:30:11 +02:00
Alessandro Ranellucci
d061534b83
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
README.markdown
lib/Slic3r/ExPolygon.pm
slic3r.pl
2012-08-25 14:26:32 +02:00
Alessandro Ranellucci
92518d28fc
New option to configure the threshold for enforcing solid infill. #224
2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
0eadc5adba
Manual rebase of the avoid_crossing_perimeters feature
2012-08-23 15:42:58 +02:00
Alessandro Ranellucci
9e682924c7
New separate options for retraction length to be used when switching tools
2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
d02012e4a3
Accept multiple --load arguments for GUI too
2012-08-09 00:59:41 +02:00
Alessandro Ranellucci
db8bb8c3d8
Revert "Hide extruder offset settings for the primary extruder"
...
This reverts commit 713d87b4c6
2012-08-09 00:51:53 +02:00
Alessandro Ranellucci
2bf219a637
Bugfix: random failure to load presets. #600
2012-08-09 00:41:03 +02:00
Alessandro Ranellucci
88cbae0d48
Bugfix: saving a printer preset with less extruders than it had resulted in the same number of extruders as before
2012-08-08 22:52:26 +02:00
Alessandro Ranellucci
713d87b4c6
Hide extruder offset settings for the primary extruder
2012-08-08 22:14:05 +02:00
Alessandro Ranellucci
9ca21c835c
Merge branch 'per-extruder-retraction-settings'
...
Conflicts:
lib/Slic3r/Config.pm
lib/Slic3r/GUI/Tab.pm
2012-08-08 22:06:47 +02:00
Alessandro Ranellucci
4fcecf5ef6
Bugfix: when an external config was selected in any section, exported settings didn't reflect other sections properly
2012-08-08 19:36:34 +02:00
Alessandro Ranellucci
866b09f3f9
New --extruder-offset option
2012-08-07 21:39:45 +02:00
Alessandro Ranellucci
a2c28fd6da
Move retraction settings to a temporary page until we merge the per-extruder-retraction-settings branch
2012-08-07 21:11:58 +02:00
Alessandro Ranellucci
cf01c142de
Make retraction configurable for each extruder
2012-08-07 21:08:56 +02:00
Alessandro Ranellucci
106c8fe46f
Minor reordering of infill options in GUI; also hide the entire staticbox if threads are not available
2012-08-07 20:22:26 +02:00
Alessandro Ranellucci
2548d5b993
Expose all multi-extruder settings to the GUI
2012-08-07 20:14:28 +02:00
Alessandro Ranellucci
793301d319
Allow to select multiple filaments in GUI when multiple extruders are configured
2012-08-07 18:44:47 +02:00
Alessandro Ranellucci
2616c24ffc
Bugfix: plater wasn't initialized with last settings. #573
2012-08-06 19:19:22 +02:00
QuantumConcepts
6bcbc743dd
Fixed #586 .
2012-08-06 08:23:00 -04:00
Alessandro Ranellucci
a8e9b6926a
Bugfix: each tab was loading too much from external config files
2012-08-06 13:03:44 +02:00
Alessandro Ranellucci
92754d7cd4
Fix multi-extruder options in GUI
2012-07-28 11:53:10 +02:00
Alessandro Ranellucci
87934a972c
Port recent global changes to the wizard
2012-07-28 11:34:12 +02:00
Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Henrik Brix Andersen
9f719d42bc
Include preset name in confirmation dialog
2012-07-27 14:11:04 +02:00
Henrik Brix Andersen
9e1308c03f
Ask for confirmation when deselecting a dirty preset.
2012-07-27 13:57:58 +02:00
Henrik Brix Andersen
848784ad95
Clear dirty when deleting preset.
2012-07-27 13:56:52 +02:00
Henrik Brix Andersen
40f1176346
Be careful not to change the current selection when working around http://trac.wxwidgets.org/ticket/13769
2012-07-27 13:54:45 +02:00
Alessandro Ranellucci
1d364d7823
Refactor OptionsGroup to decouple it from the config repository, add ConfigOptionsGroup
2012-07-24 15:33:11 +02:00
Henrik Brix Andersen
0b0e531661
Use more generic EVT_KEY_DOWN().
2012-07-24 14:17:10 +02:00
Henrik Brix Andersen
4dc41d2ca3
Intercept TAB key events in the wxTreeCtrl and generate a wxNavigationKeyEvent.
2012-07-24 12:42:58 +02:00
Henrik Brix Andersen
69e075df82
Hidden Sizer items does not take up space, simply show/hide pages instead of removing/adding them.
2012-07-24 12:41:51 +02:00
Henrik Brix Andersen
642bb336eb
Add the page before showing it.
2012-07-24 00:34:57 +02:00
Henrik Brix Andersen
37667d87ce
Use Wx::Sizer::Detach() instead of Wx::Sizer::Remove()
2012-07-24 00:34:07 +02:00
