Lukas Matena
|
5a02bde170
|
Fix of merge conflict and uninitialized variables in writer class
|
2018-02-22 09:28:31 +01:00 |
|
Lukas Matena
|
5ca0a2f37d
|
Parametrized toolchanges, experiments with sparse wipe tower, etc
|
2018-02-21 13:07:32 +01:00 |
|
Lukas Matena
|
37bbeeb9d0
|
Parametrization of ramming and loading sequence - first steps
|
2018-01-04 12:03:06 +01:00 |
|
Lukas Matena
|
180967484e
|
Correction of wipe tower brim generation
|
2017-12-22 11:26:43 +01:00 |
|
Lukas Matena
|
4583d62edd
|
Merge branch 'master' into wipe_tower_improvements
|
2017-12-21 13:47:33 +01:00 |
|
Lukas Matena
|
b7a326a550
|
First attempts of variable wipe implementation, sparse infill modified to sawtooth
|
2017-12-21 13:28:26 +01:00 |
|
Lukas Matena
|
87c67636df
|
Extrusion flow calculation based on nozzle diameter etc
|
2017-12-07 11:59:14 +01:00 |
|
Lukas Matena
|
c34fd10e23
|
Wipe tower rotation around center point
|
2017-12-05 11:25:38 +01:00 |
|
bubnikv
|
16bd3fc624
|
Fixed an extruder ordering bug on the 1st layer wipe tower.
This is a regression after introducing the extruder priming areas
at the edge of the print bed.
|
2017-12-03 09:43:00 +01:00 |
|
Lukas Matena
|
2921302fe9
|
GUI integration of rotation angle setting
|
2017-11-30 12:08:22 +01:00 |
|
bubnikv
|
b08d6f1969
|
The last priming area is shortened and the excess wipe is moved
into the wipe tower if there is enough space inside the wipe tower.
|
2017-09-12 15:55:38 +02:00 |
|
bubnikv
|
b610866d77
|
Implemented priming of all the filaments of the Prusa Multi Material.
|
2017-09-01 17:30:18 +02:00 |
|
bubnikv
|
48f826c2c5
|
Disabled a limit of the nozzle diameter 0.4mm for the Prusa Wipe Tower.
Allowed scaling of the extrusion amount over the Prusa Wipe Tower
for layer heights over 0.2mm.
|
2017-08-28 14:57:00 +02:00 |
|
bubnikv
|
a15e6127cf
|
Relaxed the requirements on the layer height for the Wipe Tower to
the span of 0.15mm to 0.35mm.
|
2017-06-08 12:10:34 +02:00 |
|
bubnikv
|
2178180a19
|
Wipe tower: Wipe less than usual amount of material if the wipe
is followed by the final sparse zig-zag tower section.
|
2017-05-30 10:51:38 +02:00 |
|
bubnikv
|
e000b22578
|
Implemented wipe tower print path preview.
|
2017-05-25 22:27:53 +02:00 |
|
bubnikv
|
dfc4717308
|
Fixes for Multi Material ramming, increased separation of wipe lines.
|
2017-05-20 18:59:05 +02:00 |
|
bubnikv
|
70db88dd90
|
Improved retract handling on bowden extruders:
Separated deretract speed from a retract speed,
allowed a partial retract before wipe.
|
2017-05-19 19:24:21 +02:00 |
|
bubnikv
|
81701b400c
|
Prusa Multi Material: Improved path planning when jumping to the wipe tower.
|
2017-05-18 16:53:19 +02:00 |
|
bubnikv
|
7b6c9b3b3c
|
Fixes of the Prusa Multi Material wipe tower.
|
2017-05-17 16:45:37 +02:00 |
|
bubnikv
|
4bc827d1da
|
WipeTowerPrusaMM: Added some documentation, fixed minor issues.
|
2017-05-17 10:42:39 +02:00 |
|
bubnikv
|
7b152919a6
|
Changed handling of extruder temperatures
for single_extruder_multi_material printers.
Fixed some compilation errors on OSX.
Disabled re-slicing on change of new G-code only parameters.
|
2017-05-16 16:02:52 +02:00 |
|
bubnikv
|
c22b6edeeb
|
Initial integration of the Prusa MultiMatrial Wipe Tower.
|
2017-05-16 13:45:28 +02:00 |
|