3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
15,553 Commits 1 Branch 1 Tag 249 MiB
5af4167b74
Commit Graph

344 Commits

Author SHA1 Message Date
rtyr
669e8d573c
Merge pull request #6069 from pmjdebruijn/creality_start_gcode_2 
creality.ini: improve start_gcode comments
 2021-02-17 22:52:11 +01:00
Pascal de Bruijn
991bab61bb creality.ini: support CR-6 SE pause print 2021-02-17 19:49:15 +01:00
Pascal de Bruijn
e3ea71a0d6 creality.ini: improve start_gcode comments 2021-02-17 18:39:59 +01:00
Pascal de Bruijn
e7ffcec29e creality.ini: add Ender-6 2021-02-15 13:53:55 +01:00
rtyr
66976bb954
Merge pull request #6021 from pmjdebruijn/creality_max 
creality.ini: add Ender-3 Max
 2021-02-12 14:04:34 +01:00
rtyr
5a5d9d0e53
Thumbnails for new Creality models. 
https://github.com/prusa3d/PrusaSlicer/pull/5968
https://github.com/prusa3d/PrusaSlicer/pull/6021
 2021-02-12 14:03:38 +01:00
rtyr
b0e5ab8d47
Updated CR6 thumbnail. 2021-02-12 12:31:05 +01:00
rtyr
f8b660e08e
Initial Artillery bundle 
Artillery Sidewinder X1
Artillery Genius 
https://github.com/prusa3d/PrusaSlicer-settings/pull/122
 2021-02-12 11:45:36 +01:00
rtyr
6e994b2882
Artillery resources 2021-02-12 11:43:19 +01:00
Pascal de Bruijn
104c560575 creality.ini: Move Ender-3 V2 into proper order 2021-02-11 17:31:51 +01:00
Pascal de Bruijn
5dbd503d3d creality.ini: add Ender-3 Max 2021-02-11 17:24:01 +01:00
rtyr
0b4720338f
Merge pull request #5968 from pmjdebruijn/creality_max 
Creality CR-6 Max / CR-10 Max / etc
 2021-02-09 09:19:40 +01:00
rtyr
310531d2db
Updated Kossel bed textures. 2021-02-08 23:43:21 +01:00
rtyr
1d0484a25d
Anycubic 0.0.7 Updated start g-code 2021-02-08 23:41:13 +01:00
Pascal de Bruijn
d135bd86de creality.ini: Add Extrudr GreenTEC Pro filament 2021-02-08 17:07:41 +01:00
Pascal de Bruijn
7f925e700b creality.ini: add experimental support for CR-X (Pro) 2021-02-07 16:45:14 +01:00
Pascal de Bruijn
723e0b6e9d creality.ini: Add safety zone for CR-10 S Pro 2021-02-07 15:43:48 +01:00
Pascal de Bruijn
8feef8bcf0 creality.ini: add vendor associated color for Das Filament 2021-02-07 15:03:09 +01:00
Pascal de Bruijn
8ff82cc1d2 creality.ini: increase CR-6/CR-10 Max retract_length slightly 2021-02-07 13:48:28 +01:00
Pascal de Bruijn
622664ef8e creality.ini: Add CR-10 Max 2021-02-05 17:28:44 +01:00
Pascal de Bruijn
6373c7f1cb creality.ini: Add CR-6 Max and add safety border to CR-10 S4 2021-02-04 18:41:17 +01:00
Pascal de Bruijn
a4a465b9a6 creality.ini: Creality CR-6 SE improvements 2021-02-03 17:34:06 +01:00
rtyr
e52efe48b0
Creality CR-6 SE thumbnail 2021-02-02 11:40:58 +01:00
rtyr
c8e5277f0c
Updated print temperature for Das Filament PLA 
https://github.com/prusa3d/PrusaSlicer/issues/5693
 2021-02-01 21:22:30 +01:00
rtyr
a2a0a86138
Creality 0.0.13 2021-01-29 10:44:35 +01:00
rtyr
31e7a60494
Creality - bumped up version to 0.0.13 2021-01-29 10:43:34 +01:00
rtyr
3009b314c8
Merge pull request #5908 from pmjdebruijn/creality_4 
creality.ini various improvements
 2021-01-28 23:48:36 +01:00
rtyr
0168fc612a
Updated bed_texture for Anycubic Kossel 2021-01-28 23:38:45 +01:00
rtyr
7b3a06fd05
Updated Anycubic Kossel bed models. 2021-01-28 23:35:38 +01:00
rtyr
c9ebc18a10
Added Anycubic Kossel texture 
from https://github.com/prusa3d/PrusaSlicer/pull/5747
 2021-01-28 23:34:43 +01:00
Pascal de Bruijn
1f9fe92720 creality.ini: hide CR-6 SE until next release 2021-01-28 18:14:19 +01:00
Pascal de Bruijn
ba87613454 creality.ini: update start_gcode/end_gcode comments 2021-01-28 18:13:45 +01:00
Pascal de Bruijn
ba6a40bcce creality.ini: add CR-6 SE 2021-01-27 17:42:32 +01:00
Pascal de Bruijn
f2a624007b creality.ini: enable more filaments by default 2021-01-27 17:34:38 +01:00
Pascal de Bruijn
5fa4880eac creality.ini: add comments 2021-01-27 17:15:43 +01:00
Pascal de Bruijn
ed04eb1f20 creality.ini: remove superfluous printer_variant from ENDER3V2 2021-01-27 17:04:13 +01:00
Pascal de Bruijn
93da13b0a3 creality.ini: set slowabl to 120C to match fastabl 2021-01-25 21:06:50 +01:00
Pascal de Bruijn
c27ab57c18 creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE 
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.

this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
 2021-01-25 20:32:22 +01:00
Pascal de Bruijn
5f9cf7cfae creality.ini: Move print head further up for low prints 
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
 2021-01-25 17:22:13 +01:00
Pascal de Bruijn
78354ee991 creality.ini: reduce prime line in start_gcode 
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode

the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
 2021-01-24 13:09:22 +01:00
Pascal de Bruijn
6bcdf0999c creality.ini: universal end_gcode improvement 
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
 2021-01-24 12:40:52 +01:00
Pascal de Bruijn
4ede5c3959 creality.ini: Ender3 V2 naming consistency 2021-01-23 19:31:23 +01:00
Pascal de Bruijn
6955e8ec08 creality.ini: raise Das Filament PLA bed temp 
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.

So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
 2021-01-23 19:12:01 +01:00
Pascal de Bruijn
231cd758c1 creality.ini: improve nonabl start_gcode 2021-01-23 19:09:29 +01:00
rtyr
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles. 2021-01-08 10:57:41 +01:00
rtyr
250ef23fd5
Updated 0.0.12 description 2021-01-08 09:44:09 +01:00
rtyr
ecb85b2166
Added Ender 3-V2. 
Based on https://github.com/prusa3d/PrusaSlicer/pull/5702.
 2021-01-08 09:42:01 +01:00
rtyr
e8ab281cd0
TriLAB 0.0.6 - Added material TPU 93A 2021-01-06 20:35:37 +01:00
rtyr
615356b69c
Ender3V2 thumbnail 2021-01-06 13:36:44 +01:00
rtyr
ef5df08358
Initial FLSun bundle 
https://github.com/prusa3d/PrusaSlicer/pull/5582
 2021-01-03 20:59:36 +01:00
rtyr
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers 2020-12-28 15:03:05 +01:00
rtyr
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro 2020-12-28 14:36:57 +01:00
rtyr
ea327c2d8c
Creality 0.0.10 
Parameter consistency improvements. Enabled conservative elephant foot compensation.
 2020-12-21 15:21:26 +01:00
rtyr
f7d5032d0e
Bumped up version to 0.0.10 2020-12-21 15:20:29 +01:00
Pascal de Bruijn
71cb5d1469 Creality.ini: default to Generic PLA, and move defaults to common printer section 2020-12-18 18:55:29 +01:00
Pascal de Bruijn
33c36e6777 creality.ini: enable conservative elefant_foot_compensation 
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.

A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.

And I'd prefer to undercompensate as opposed to overcompensate
as a default.
 2020-12-17 13:05:40 +01:00
Pascal de Bruijn
1cf97b9c93 Creality.ini: improve parameter consistency 2020-12-17 13:04:39 +01:00
rtyr
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version. 2020-12-16 16:18:31 +01:00
rtyr
e9ee88c397
Fixed end g-code for Ender 5 2020-12-13 09:25:59 +01:00
rtyr
fe4f1b15c6
Anycubic 0.0.6 2020-12-08 22:16:13 +01:00
rtyr
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format. 2020-12-08 22:12:15 +01:00
Nicolas North [norðurljósahviða]
fa8a72b2a3
Reduced max print height for Anycubic Predator to 445mm 2020-12-08 11:12:42 +01:00
rtyr
b0485e3949
TriLAB 0.0.5 Removed obsolete host keys. 2020-12-05 11:29:16 +01:00
rtyr
72a64c200b
Anycubic 0.0.5 Updated end g-code. 2020-12-05 11:23:07 +01:00
rtyr
02a63e8de2
LulzBot 0.0.2 Removed obsolete host keys 2020-12-05 11:19:53 +01:00
rtyr
4cffd490cc
BIBO 0.0.3 Removed obsolete host keys 2020-12-05 11:14:27 +01:00
rtyr
92f7bdcf92
0.0.8 min_slic3r_version changed to 2.3.0-beta2 2020-12-05 10:21:13 +01:00
rtyr
7cb7c5fd55
Changed layer_z to max_layer_z in end g-code. 2020-12-05 10:18:49 +01:00
rtyr
6716416add
Removed redundant line 2020-12-05 09:58:51 +01:00
rtyr
b95f9897b8
Updated end g-code. Added full_fan_speed_layer values. 2020-12-05 09:55:07 +01:00
rtyr
ee088e219e
Creality 0.0.8 2020-12-05 09:53:05 +01:00
rtyr
c4d97d3d9b
bumped up to 0.0.8 2020-12-05 09:51:38 +01:00
Pascal de Bruijn
e3a0a8878a creality.ini: add Extrudr PLA NX2 spool weight 2020-11-29 19:05:02 +01:00
Pascal de Bruijn
0f03b74261 creality.ini: add 3DJAKE ecoPLA spool weight 2020-11-29 12:47:48 +01:00
Pascal de Bruijn
f86dab9f36 creality.ini: slight end_gcode improvements 
gcode order made more similar to prusa mini
 2020-11-29 12:42:08 +01:00
rtyr
6d27b0f5d0
1.2.0-beta0 2020-11-28 10:35:59 +01:00
rtyr
4b2f9562ab
TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials 
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
 2020-11-24 09:53:50 +01:00
rtyr
ee20331ead
1.2.0-alpha0 added filament spool weight 2020-11-21 15:42:38 +01:00
rtyr
9023f092ad
Creality 0.0.7 - updated start g-code 2020-11-21 10:24:54 +01:00
rtyr
a2e763d4ca
Bumped up creality bundle version to 0.0.7 2020-11-21 10:22:57 +01:00
Pascal de Bruijn
32345b9e75 creality.ini: make start_gcode robust for absolute_e 2020-11-18 18:40:20 +01:00
Nicolas North [norðurljósahviða]
342f0738c2
revert version bump to 0.0.4 and remove accel settings for Predator 2020-11-15 00:51:17 +01:00
Nicolas North [norðurljósahviða]
28c2277902
Equalize all accelerations to avoid filling gcode with M204 commands 2020-11-14 17:16:46 +01:00
Nicolas North [norðurljósahviða]
2558a98636
fix spurious custom setting in Anycubic Predator profile 2020-11-14 12:27:20 +01:00
rtyr
cd2b502c38
Updated Anycubic thumbnails. 2020-11-13 13:08:09 +01:00
rtyr
2df97edcf5
Updated LulzBot thumbnails. 2020-11-12 19:20:23 +01:00
rtyr
62a29237fc
Added filament profiles, adjusted temperatures, updated start g-code for some models. 2020-11-12 18:55:42 +01:00
rtyr
0c78573f5c
Version changed to 0.0.6 2020-11-12 18:52:48 +01:00
rtyr
868ffa21d5
Updated BIBO2 thumbnail. Removed "BETA" label. 2020-11-12 18:47:30 +01:00
Pascal de Bruijn
b9da42eb67 creality.ini: raise remaining PLA bed temperatures to 60 
While doing a bunch of bed adhesion tests, both on Creality's
FakeTak as well as on smooth PEI, while 50 degrees seems to work
with most lower temp PLAs at least, but less so with the higher
temp PLAs, it universally requires the first layer height to be
dialed in much better to not get any warping.

With the bed temperature set to 60 degrees, there is much more
leeway in the first layer height while still getting unwarped
prints.

Particularly given that most Creality printers don't have ABL as
standard, I think it might sense from a robustness perspective
to have all PLAs default to at least 60 degrees, as to increase
chances prints will come out just fine.

https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
 2020-11-12 18:26:45 +01:00
rtyr
aa32f48c9c
Updated creality thumbnails. Removed "BETA" label. 2020-11-10 17:53:49 +01:00
rtyr
cf339c5f8d
Updated thumbnails. Removed "BETA" sign. 2020-11-10 17:26:42 +01:00
rtyr
21a7a606d2
Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support 
https://github.com/prusa3d/PrusaSlicer-settings/pull/108
 2020-11-10 16:02:34 +01:00
rtyr
1799d263b3
Merge pull request #5118 from trilab3d/master-trilab 
Added thumbnails for new TriLAB printers
 2020-11-10 15:59:49 +01:00
Matej Supik
0259c96287 Added thumbnails for new trilab printers - https://github.com/prusa3d/PrusaSlicer-settings/pull/108 2020-11-10 12:02:50 +01:00
Pascal de Bruijn
077cc1e5ff creality.ini: Add Devil Design PLA Galaxy (Glitter) 
This glitter PLA requires a significantly higher hot end temp to
get a similar amount of flow as the same brands counterpart
regular PLA filament

It even needs a slightly higher bed temp to prevent warping on
sharp corners
 2020-11-09 19:27:02 +01:00
Pascal de Bruijn
9f2d8299b1 creality.ini: disable pause_print_gcode (#4980) 2020-11-09 18:52:01 +01:00
rtyr
b0252ba607
Merge pull request #5114 from pmjdebruijn/creality_head_bed_first 
creality.ini: introduce slow abl variant start_gcode
 2020-11-09 15:38:43 +01:00
Pascal de Bruijn
90f1cb3414 creality.ini: introduce slow abl variant start_gcode 
printers with a large bed are probably more prone to heat induced
bed warping, there we'll split up our abl start_gcode in fast
and slow variants, where printers with a smaller bed like
the Ender-3 will still use the fast variant, printers with
a large bed like the CR-10 will use the slow variant which
heats up the bed before starting the abl procedure.
 2020-11-09 13:48:01 +01:00
rtyr
006630299b
Fixed predator output filaname format, infill overlap 2020-11-09 11:44:00 +01:00