Alessandro Ranellucci
1a06e35687
New option to specify G-code to be used at layer change. #279
2012-03-26 12:14:15 +02:00
Erkki Seppälä
0ca7577392
Added a Reslicing-function to the File menu.
2012-03-12 19:52:23 +02:00
Alessandro Ranellucci
7892a84408
Refactoring and integrations to the bed temperature handling
2012-03-03 23:14:40 +01:00
Alessandro Ranellucci
8566b4f910
Separate the Slice button a bit
2012-03-03 22:53:12 +01:00
Alessandro Ranellucci
5c79024215
Revert "Made the UI look quite a bit nicer (OS X 10.7 tested)."
...
This reverts commit 266f7799dd
2012-03-03 22:50:08 +01:00
Alessandro Ranellucci
06c22c9db3
New --fan-always-on option. #241 #110
2012-03-03 22:21:30 +01:00
Alessandro Ranellucci
2ff3ab1faf
Remove G0 from GUI until a firmware implements it
2012-03-03 21:37:10 +01:00
Alessandro Ranellucci
b5cba48e55
Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot
2012-03-03 21:27:33 +01:00
Alessandro Ranellucci
e8c64924db
Some GUI fixes after the recent contributions
2012-03-03 21:25:26 +01:00
Simon George
266f7799dd
Made the UI look quite a bit nicer (OS X 10.7 tested).
...
* Added link to website for updates
* Moved 'Slice…' button to the right as this more logically follows the
user's flow through the application
* Moved version information to the middle right under the App name (on
OS X anyway) as it is clearer what the version is referring to
* Added spacing between the buttons
* Removed colon after 'version' as this is the UI convention in about
boxes
* Changed 'Load' to 'Open' as this is the more commonly used term
* Truncated 'Configuration' to 'Config' to save space, and I believe it
is still clear what it means
* Added open and save config to File menu as this is more conventional
location
* Simplified some wording
* Rephrased the tabs to be more succinct, I believe they still make
sense
* Fixed a spelling
* Replaced '…' with proper ellipses character
2012-02-28 23:04:19 +00:00
Henrik Brix Andersen
ca49965210
Fail silently if Growl was stopped after Slic3r was started
2012-02-26 19:44:15 +01:00
Alessandro Ranellucci
9332319e10
Fail silently if Growl::GNTP fails
2012-02-26 19:29:25 +01:00
Alessandro Ranellucci
dccd7d19a9
First layer temperature. #134
2012-02-26 14:54:38 +01:00
Alessandro Ranellucci
170d29a789
New --cooling option and checkbox to enable/disable fan and cooling control
2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
1d0a852679
Cooling and fan control. #110
2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
aa98a9deb2
Mark the Slice... button as the default one (just cosmetics)
2012-02-20 12:52:40 +01:00
Alessandro Ranellucci
555c23069d
New --post-process option. Includes some cleaning of the STDOUT messages
2012-02-20 12:50:05 +01:00
Alessandro Ranellucci
615bcb27dd
New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158
2012-02-20 11:44:30 +01:00
Alessandro Ranellucci
94a2585b97
Dual extruder for support material
2012-02-19 17:02:49 +01:00
Alessandro Ranellucci
79ebb13bdb
Parse AMF
2012-02-19 15:14:54 +01:00
Alessandro Ranellucci
dba6197935
Failed to remove acceleration from GUI
2012-02-19 12:27:44 +01:00
Alessandro Ranellucci
eb2c24ecfb
Removed acceleration from the GUI (too experimental for now)
2012-02-19 12:15:58 +01:00
Alessandro Ranellucci
cf6f303256
Add checkbox for support material in the GUI
2012-02-19 12:08:08 +01:00
Henrik Brix Andersen
80bd434e5e
Remove last remains of close-after-slicing option.
2012-02-16 22:52:57 +01:00
Alessandro Ranellucci
68f001a7de
Mark acceleration settings as experimental and add a M501 command at the end of the print if acceleration control is enabled
2012-02-14 21:57:53 +01:00
Alessandro Ranellucci
74c71b4ef2
Acceleration control. #185
2012-02-10 14:53:44 +01:00
Alessandro Ranellucci
7893480fd7
Add checkbox for G0 in the GUI. #51
2012-02-06 21:17:01 +01:00
Alessandro Ranellucci
ddb0330fc1
Validate configuration before saving from GUI
2012-02-06 16:52:11 +01:00
Henrik Brix Andersen
121895d3fc
Add support for notes field in configuration profiles. #130
2012-02-05 20:55:17 +01:00
Henrik Brix Andersen
4dd33c6b05
Ask for confirmation when slicing more than one copy. #165
2012-02-05 16:43:44 +01:00
Henrik Brix Andersen
cc040df42a
Do not display the progress dialog as an application-wide modal dialog; modal to the parent window is enough. #189
2012-02-05 14:23:15 +01:00
Henrik Brix Andersen
cec660c263
Fallback on last used config path if no last skein path is set and vice versa.
2012-02-03 20:22:45 +01:00
Henrik Brix Andersen
b4dc299be0
Use separate variables for last used config directory and last used skein directory. #187
2012-02-03 19:57:49 +01:00
Henrik Brix Andersen
35be7f013b
Add Growl support. #62
2012-02-03 00:30:35 +01:00
Alessandro Ranellucci
3e65af7457
Revert "New First layer flow ratio option. #182 "
...
This reverts commit 99ef0865bb
2012-01-30 14:51:05 +01:00
Alessandro Ranellucci
99ef0865bb
New First layer flow ratio option. #182
2012-01-30 14:25:14 +01:00
Alessandro Ranellucci
478775ef1c
Add checkbox to GUI to enable G-code comments
2012-01-18 10:46:39 +01:00
Alessandro Ranellucci
62ee79f0c9
Remember last config file path when loaded from CLI too
2011-12-26 19:45:01 +01:00
Alessandro Ranellucci
d6dcb35237
Remember the filename and path of the last config file loaded, to use as default for saving
2011-12-26 19:06:57 +01:00
Alessandro Ranellucci
f9446b9c6e
Cleanup the --output-filename-format implementation. #53 #137
2011-12-26 17:25:13 +01:00
Clarence Risher
1071b556cb
second draft implementation of output_filename_format
2011-12-26 04:20:45 -05:00
Alessandro Ranellucci
75cbe879b7
New "Slice and save as..." command to specify output filename. #53
2011-12-22 17:38:37 +01:00
Alessandro Ranellucci
65a018f156
Move the parsing warning to the end, so that it won't block slicing
2011-12-18 13:43:31 +01:00
Alessandro Ranellucci
56691c1dea
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
0ebd8eb8a9
Don't die when config has unknown options. #108
2011-12-10 10:39:07 +01:00
Alessandro Ranellucci
c957c27367
Remember last opened directory. #106
2011-12-09 14:07:50 +01:00
Alessandro Ranellucci
d9a70ea80d
Customizable overlap ratio (it defaults to 0.15 now)
2011-12-08 10:53:07 +01:00
Alessandro Ranellucci
53bc9c7421
Customizable speed for small perimeters. #60
2011-12-04 20:50:03 +01:00
Alessandro Ranellucci
28a89c70c9
New bridge flow rate multiplier option. #85
2011-12-04 20:29:21 +01:00
Alessandro Ranellucci
3ac9dd513b
Add first layer height ratio option to the GUI
2011-12-04 19:17:42 +01:00
