3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
759 Commits 1 Branch 1 Tag 249 MiB
60ca76ff05
Commit Graph

643 Commits

Author SHA1 Message Date
Alessandro Ranellucci
be8970b497 Fixed regression causing infill lines not being always connected near perimeters 2012-06-19 18:49:46 +02:00
Henrik Brix Andersen
8fcf24a766 Merge pull request #467 from henrikbrixandersen/ratio-options 
Two small ratio option improvements/bug fixes
 2012-06-19 06:44:16 -07:00
Henrik Brix Andersen
4031cf26b4 - Add Slic3r::Config::get_raw() for getting the raw, uncalculated values. 
- Use get_raw() for saving and displaying options in GUI
 2012-06-19 15:32:56 +02:00
Henrik Brix Andersen
8d25e6490a Set CLI option type to 'string' for all options allowing ratio inputs 2012-06-19 11:38:12 +02:00
Henrik Brix Andersen
b7d2860d5b Allow negating bool cli options by using '--no-foo' or '--nofoo' 2012-06-18 23:39:53 +02:00
Alessandro Ranellucci
48d345c189 Bugfix: first_layer_speed was accepting mm/m values rather than mm/s when expressed as absolute. #452 2012-06-17 19:42:11 +02:00
Alessandro Ranellucci
217a6f2525 Bugfix: any retraction_lift value different from "0" caused no retraction before layer changes. #453 2012-06-17 19:36:02 +02:00
Alessandro Ranellucci
7d6545dd07 Further simplification of point_in_polygon() 2012-06-17 19:09:11 +02:00
Mark Hindess
2ef565fc4d Simplify creation of $n, @x and @y in point_in_polygon test. 
Gives 30% speed up on simcop2387's coaster on my laptop and it cuts the
maximum resident set size too.  I know this is going to be replaced but
thought this might be useful in the meantime.
 2012-06-16 08:28:37 +01:00
Alessandro Ranellucci
ca8a91b2b0 Only apply arc compensation to circular holes. #418 2012-06-14 15:06:22 +02:00
Alessandro Ranellucci
b00d960f4d Merge pull request #450 from henrikbrixandersen/growl 
Move Growl::GNTP handling to Slic3r::GUI
 2012-06-14 05:35:25 -07:00
Henrik Brix Andersen
129f0fa904 Move Growl::GNTP handling to Slic3r::GUI to allow notifications from both Slic3r::GUI::SkeinPanel and Slic3r::GUI::Plater. 2012-06-14 13:49:50 +02:00
Nicolas Dandrimont
4296ea6da1 Slic3r::Polygon's boost_linestring method needs to close the contour. 
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour).  This
addresses some of the bridge detection issues (#414, #358).
 2012-06-14 13:33:59 +02:00
Henrik Brix Andersen
3aa901f149 Show version and description in About dialog 2012-06-12 23:51:59 +02:00
Henrik Brix Andersen
65d6a83672 wxID_EXIT is already imported, no need to specify package name 2012-06-12 23:47:59 +02:00
Henrik Brix Andersen
230d4377c9 Fix display of special menu items (wxID_ABOUT, wxID_EXIT) on OS X 2012-06-12 23:46:50 +02:00
Alessandro Ranellucci
b926e0b27d Support material lines need to be white 2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e DLP support material in SVG output (untested) 2012-06-11 14:47:48 +02:00
Alessandro Ranellucci
1f35a3f6aa Fixed regression preventing SVG export to work properly. #428 2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
71c1c66985 Label and CLI option were wrong for top_solid_infill_speed. #425 2012-06-11 13:45:03 +02:00
Alessandro Ranellucci
c0c84d13b8 Always set bed temperature after first layer if first layer temperature is set. #427 2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8 Pass config options as environment variables to post-processing scripts 2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
62bd33a766 Fixed regression causing fatal errors. #429 2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
0c4b112718 Fixed regression preventing arcs to be generated at all (center detection is still buggy) 2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
c0c53c4397 Fill gaps. #281 2012-06-07 15:31:51 +02:00
Alessandro Ranellucci
00c6b1bdf8 Bugfix: some thin walls still gave a fatal error. #416 2012-06-07 12:21:33 +02:00
Alessandro Ranellucci
0226039dfb Fixed regression when cooling is enabled 2012-06-07 11:38:54 +02:00
Alessandro Ranellucci
caa32ab282 Fixed regression causing flow errors when using legacy config files. #421 2012-06-07 11:24:45 +02:00
Alessandro Ranellucci
709c444976 Fixed fatal error when using --first-layer-extrusion-width 2012-06-07 11:17:35 +02:00
Alessandro Ranellucci
5c9916dc75 Some basic ability to close holes in non-manifold models 2012-06-06 22:28:23 +02:00
Alessandro Ranellucci
85ef7ce665 Bugfix: many thin walls were not detected correctly. #313 2012-06-06 21:27:39 +02:00
Alessandro Ranellucci
fbfbfac2b6 New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151 2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f Bugfix: not retracting between infill of different islands using low infill densities. #242 2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666 Lift Z when changing layer too 2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
8883df6692 Warn user when object couldn't be split 2012-06-06 19:00:34 +02:00
Alessandro Ranellucci
13e10abbbe Fixed regression causing some models not to be sliced correctly. #410 2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
c7af74884f Legacy config files were not correctly supported 2012-06-06 18:47:11 +02:00
Alessandro Ranellucci
82dd3c7a3e New --perimeters-extrusion-width and --infill-extrusion-width options. #302 2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501 New --first-layer-extrusion-width option. #385 2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
d412820733 Update: preview area was not updating to the largest side of the build area 2012-06-06 16:18:41 +02:00
Alessandro Ranellucci
16b774603c Accept either absolute or relative values for --first-layer-height. #151 2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
896c7e952e Renamed bottom_layer_speed to first_layer_speed for consistency 2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
4a188f8566 Support for legacy config files containing bottom_layer_speed_ratio. #151 2012-06-06 15:48:14 +02:00
Alessandro Ranellucci
91ffb74429 Accept either absolute or relative values for --bottom-layer-speed. #151 2012-06-06 15:43:54 +02:00
Alessandro Ranellucci
aedb6cc35f Accept both relative and absolute extrusion width values. #151 2012-06-06 15:23:34 +02:00
Alessandro Ranellucci
2e3c8241e4 Merge pull request #407 from beanz/simplify-check-manifoldness 
Remove grep that is effectively repeated.
 2012-06-05 01:57:45 -07:00
Josh McCullough
9da034a042 fixes #409 2012-06-05 10:55:02 +02:00
Mark Hindess
2689f49ef8 Remove grep that is effectively repeated. 2012-05-31 18:15:40 +01:00
Alessandro Ranellucci
ea83c562c1 Fixed regression caused by sequential printing code preventing skirt to extend past first layer. #396 2012-05-31 09:37:39 +02:00
Alessandro Ranellucci
3ef86ad6ff Allow loading multiple files at once. #402 2012-05-31 09:26:30 +02:00
Alessandro Ranellucci
8aa20cd784 Fixed the "Export SVG..." menu item. #399 2012-05-30 12:06:01 +02:00
Alessandro Ranellucci
5eae22f8b0 Enforce prompt when overwriting G-code files. #398 2012-05-30 11:55:46 +02:00
Alessandro Ranellucci
99b265a89a Fixed regression causing bad slicing 2012-05-29 17:12:00 +02:00
Alessandro Ranellucci
26051d12ef Bugfix: fatal error when a non-manifold object is processed on a non-thraeded perl 2012-05-29 17:02:47 +02:00
Alessandro Ranellucci
d8d2f73aff Fixed regression causing fatal errors with many objects. #394 2012-05-29 14:54:20 +02:00
Alessandro Ranellucci
af7ccb9fc1 Refactor resource paths 2012-05-29 14:19:14 +02:00
Alessandro Ranellucci
4db416773c Fixed typos in bed temperature M-codes. #386 2012-05-29 09:40:42 +02:00
Alessandro Ranellucci
bc4b4a981b Take extruder clearance radius into account when autopositioning 2012-05-29 09:38:53 +02:00
Alessandro Ranellucci
ce3e2d396e Fixed regression preventing STL export from working. #387 2012-05-29 09:35:57 +02:00
Alessandro Ranellucci
e383d5e02d Move struct format to constant 2012-05-28 20:29:51 +02:00
Alessandro Ranellucci
34e3dfdb08 Large memory savings (down to about 50%) for high-res input files 2012-05-28 19:58:27 +02:00
Alessandro Ranellucci
efdf266df1 Removed useless Polygon constructor and some cleanup 2012-05-23 11:51:20 +02:00
Alessandro Ranellucci
5a78111efa Options to set extruder clearance for sequential printing and graphical preview of collisions 2012-05-23 11:47:52 +02:00
Alessandro Ranellucci
2c28d2f874 Bugfix: with 0 solid layers, no infill was generated at all on fist and last layer. #325 2012-05-22 12:24:48 +02:00
Alessandro Ranellucci
e7d609db12 Fix previous commit about slicing from smallest to tallest 2012-05-21 20:23:17 +02:00
Alessandro Ranellucci
e4b37db13f Print objects from the smallest to the tallest to avoid extruder collisions (this applies when using the complete_objects setting) 2012-05-21 20:19:30 +02:00
Alessandro Ranellucci
181f750618 Invert SVG colors for DLP printing. #380 2012-05-21 18:29:19 +02:00
Alessandro Ranellucci
ce6b4aeaee New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape) 2012-05-20 20:08:59 +02:00
Alessandro Ranellucci
494f4f94bf After recent memory optimizations, no solid layers were made when using fill density == 0 2012-05-20 17:28:53 +02:00
Alessandro Ranellucci
67a076b360 Removing warnings here and there 2012-05-20 17:21:31 +02:00
Alessandro Ranellucci
2ae2c6a311 Remove thread warnings 2012-05-20 16:29:52 +02:00
Alessandro Ranellucci
59ba34caf3 Fix toolbar on Windows. #354 2012-05-20 16:24:10 +02:00
Alessandro Ranellucci
d550f3fb5f Fixed regression preventing top solid shells to be computed 2012-05-20 13:03:34 +02:00
Alessandro Ranellucci
731367a6a0 Bugfix, support material still not working well after memory optimizations 2012-05-20 11:44:30 +02:00
Alessandro Ranellucci
1998801a58 Read OBJ files. #324 2012-05-20 11:40:37 +02:00
Alessandro Ranellucci
fbe70ac15b Remove debugging statement 2012-05-20 11:08:44 +02:00
Alessandro Ranellucci
3c8dbcef4a Do not store normals and save a lot of memory 2012-05-20 11:05:16 +02:00
Alessandro Ranellucci
74c00cdb7a Yes, recent memory optimizations broke concentric infill too 2012-05-19 23:47:36 +02:00
Alessandro Ranellucci
4aa85f4571 Fixed arcs.t to work with new serialization mechanism 2012-05-19 23:39:36 +02:00
Alessandro Ranellucci
159ca3f65e Accept --threads 1 on non-threaded perls too 2012-05-19 23:18:29 +02:00
Alessandro Ranellucci
12c6e39837 Bugfix: hole compensation was making holes too large. #348 2012-05-19 23:12:21 +02:00
Alessandro Ranellucci
0bb487fe9f Recent memory optimizations broke support material generation 2012-05-19 22:53:30 +02:00
Alessandro Ranellucci
fa4f2c8b97 New option to randomize starting points across layers 2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
b360b2bcea Fixed regression causing side gaps in solid infill 2012-05-19 21:57:47 +02:00
Alessandro Ranellucci
c97ced50ff Bugfix: GUI threading issues. #369 2012-05-19 21:13:10 +02:00
Alessandro Ranellucci
9f21d5b3c2 One more debugging statement left in 2012-05-19 21:03:24 +02:00
Alessandro Ranellucci
a981ac5c8e Don't display annoying warnings about parts not fitting in the printbed 2012-05-19 20:48:26 +02:00
Alessandro Ranellucci
190875d3df Debugging statement left in 2012-05-19 20:47:29 +02:00
Alessandro Ranellucci
23ae015c49 Memory optimizations broke multiple copies 2012-05-19 20:30:46 +02:00
Alessandro Ranellucci
22f8d57b36 Memory optimizations broke thin walls 2012-05-19 19:40:51 +02:00
Alessandro Ranellucci
b246480535 Massive reduction of memory usage (down to one third). 2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
882a022e3a Even more constants, less memory, more speed 2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b More constants, less strings => ess memory usage 2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
8fe5d11624 Set number of threads from GUI and save it in config files. #154 2012-05-19 15:08:32 +02:00
Alessandro Ranellucci
b93a46969d Better icon for Export G-code button 2012-05-19 15:02:23 +02:00
Alessandro Ranellucci
a99dea9ad3 Swap rotate cw and ccw buttons 2012-05-19 15:00:51 +02:00
Alessandro Ranellucci
2d67d6b0b6 Restore 100% flow for support material 2012-05-17 22:57:59 +02:00
Alessandro Ranellucci
76e079126f Don't rearrange plate upon object rotation 2012-05-17 19:32:50 +02:00
Alessandro Ranellucci
4bffa9cb6b Use perimeter length, not area, to detect small perimeters. #355 2012-05-14 00:30:52 +02:00
Alessandro Ranellucci
2a6ad2f3f7 Bugfix: removed warnings. #365 2012-05-13 22:56:40 +02:00