Alessandro Ranellucci
|
57e6a7becd
|
Fix --help output: --retract-layer-change is disabled by default. #2846
|
2015-05-25 00:35:57 +02:00 |
|
Alessandro Ranellucci
|
1180a6d83f
|
Merge pull request #2508 from strahlex/machinekit-gcode
added support Machinekit flavour GCode
|
2015-02-15 17:00:08 +01:00 |
|
Alessandro Ranellucci
|
43f4806142
|
Load files into the GUI when supplying them as command line arguments along with the --gui switch. #2644
|
2015-02-14 12:54:06 +01:00 |
|
Alexander Rössler
|
d35226b889
|
added support Machinekit flavour GCode
|
2015-02-06 18:48:46 +01:00 |
|
Alessandro Ranellucci
|
07cd25d0ec
|
New option for customization of infill/perimeters overlap. #2459
|
2015-02-01 12:08:25 +01:00 |
|
Alessandro Ranellucci
|
059b00a829
|
New --before-layer-change option and new layer_z placeholder. #2602
|
2015-01-30 20:08:00 +01:00 |
|
Cyryl Plotnicki-Chudyk
|
1bc83e658b
|
use 'perl Build.PL --sudo' instead of 'sudo perl Build.PL'
|
2015-01-20 16:48:15 +01:00 |
|
Alessandro Ranellucci
|
7b980c1dc9
|
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
|
2015-01-19 09:52:24 +01:00 |
|
Alessandro Ranellucci
|
306bc02e29
|
Fix --help, wrong default were displayed for a couple options. #2541
|
2015-01-15 17:49:22 +01:00 |
|
adius
|
4b38cffc60
|
Fix typo in documentation
|
2015-01-13 00:19:01 +01:00 |
|
Alessandro Ranellucci
|
47e4e8bb66
|
Option to use volumetric E values. #1746
|
2015-01-05 19:39:10 +01:00 |
|
Alessandro Ranellucci
|
c00061678b
|
Use perimeter extruder for brim. #618
|
2014-12-17 00:45:05 +01:00 |
|
Alessandro Ranellucci
|
e79aa2e81c
|
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
|
2014-12-17 00:34:00 +01:00 |
|
Alessandro Ranellucci
|
ff9b53260d
|
New experimental feature for pressure management. Credits to @llluis for the original implementation. #1203 #1677 #2018
|
2014-11-24 18:22:39 +01:00 |
|
Alessandro Ranellucci
|
c2e710d092
|
Removed --g0
|
2014-10-21 21:41:11 +02:00 |
|
Alessandro Ranellucci
|
0d2dcbc85b
|
Typo in command line help (wrong default for default_acceleration). #2283
|
2014-09-24 22:25:23 +02:00 |
|
Alessandro Ranellucci
|
a776cf280b
|
New --split option
|
2014-08-03 16:08:04 +02:00 |
|
Alessandro Ranellucci
|
a02ea2842c
|
Change default layer height to 0.3mm
|
2014-07-23 14:15:14 +02:00 |
|
Alessandro Ranellucci
|
f81232b79d
|
Remove --bed-size from --help output
|
2014-07-04 10:56:06 +02:00 |
|
Alessandro Ranellucci
|
e3e69251cb
|
New XY Size Compensation option. #581 #56
|
2014-06-10 13:28:57 +02:00 |
|
Alessandro Ranellucci
|
3599bd0bae
|
Distinct extrusion width for external perimeters
|
2014-06-09 21:22:15 +02:00 |
|
Alessandro Ranellucci
|
88a2e5c791
|
Typo seal -> seam :-)
|
2014-05-24 22:10:28 +02:00 |
|
Alessandro Ranellucci
|
a3bd1b5302
|
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
|
2014-05-22 19:34:49 +02:00 |
|
Alessandro Ranellucci
|
8ca352eb62
|
Separate speed option for support material interface. #2009
|
2014-05-21 15:21:20 +02:00 |
|
Y. Sapir
|
85bca96982
|
Add dir --output msg to README, too.
|
2014-04-27 14:21:59 +03:00 |
|
Alessandro Ranellucci
|
ce9cf4d964
|
Don't put supports under bridges and potential bridges
|
2014-04-26 17:19:50 +02:00 |
|
Alessandro Ranellucci
|
fe1691c151
|
New --cut feature
|
2014-04-25 10:20:30 +02:00 |
|
Alessandro Ranellucci
|
7421a7bf63
|
Turn fill_density into percentage
|
2014-03-22 16:23:33 +01:00 |
|
Alessandro Ranellucci
|
05c3c56745
|
Update README
|
2013-11-16 10:20:11 +01:00 |
|
Alessandro Ranellucci
|
beb7939e22
|
Rename standby_temperature to ooze_prevention. #1523
|
2013-11-15 16:01:15 +01:00 |
|
Alessandro Ranellucci
|
bcc061176c
|
New option to use G10/G11 for firmware-controlled retraction. #1494
|
2013-10-27 16:59:18 +01:00 |
|
Alessandro Ranellucci
|
ae7600ee55
|
Update MANIFEST
|
2013-09-19 16:06:57 +02:00 |
|
Alessandro Ranellucci
|
213f832e75
|
Tiny fixed to README [ci skip]
|
2013-09-19 12:11:22 +02:00 |
|
Alessandro Ranellucci
|
b90a896a50
|
Update README [ci skip]
|
2013-09-19 12:09:13 +02:00 |
|