to suppress the MM priming towers.
The PrusaResearch.ini was modified for the MMU2 printers to
correctly prime the initial extruder when
single_extruder_multi_material_priming is disabled.
(the MachineEnvelopeConfig class).
Added localization support for libslic3r through a callback
(the callback is not registered yet, so the localization does nothing).
Localized the Print::validate() error messages.
due to the differences in the M203 code
(RepRap firmware has it in mm/min, Marlin in mm/sec).
This difference is important to the G-code time estimator.
Changed the g-code flavor to Marlin for all Prusa3D bundled profiles.
thanks @lordofhyphens, https://github.com/alexrj/Slic3r/pull/3275
Improved handling of custom G-code blocks: Slic3r will try to extract
the target extruder and bed temperatures from the custom G-code blocks.
The values of StaticPrintConfig derived objects were searched by a name
walking through a huge chained if.
Now they are being mapped with a std::map.
Also initialization of StaticPrintConfig classes from their ConfigOptionDef
defaults is done by maintaining a single global definition of each
StaticPrintConfig derived class, and a new instance is initialized
from this static copy.
Also the ConfigOption instances are casted using static_cast
wherever possible, and their types are verified by a virtual type() method.
This approach avoids insiginificant performance penalty of a dynamic_cast.
Also the compare and clone methods were added to ConfigOption,
and the cloning & compare work on binary values, not by serialization.
variable. When set to zero, the usual automatic bridge detection applies.
The bridging angle override may be set at the Infill->Advanced settings,
or through a modifier mesh.
Added UNUSED macro to libslic3r.h, used it to reduce some compile warnings.
Split the Int128 class from Clipper library to a separate file,
extended Int128 with intrinsic types wherever possible for performance,
added new geometric predicates.
Added a draft of new FillRectilinear3, which should reduce overfill near the perimeters in the future.
values to GCode generator, one per active extruder:
bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time
Now it remains to extend Slic3r to correctly apply these values.
