Y. Sapir
66d23a2416
Convert Extruder object (mostly) to C++ with lots of fields.
2014-04-27 23:42:59 +03:00
Alessandro Ranellucci
2738a304e8
Update credits. Mention Gary Hodgson, Petr Ledvinap, Y. Sapir
2014-04-27 20:04:02 +02:00
Alessandro Ranellucci
ce9cf4d964
Don't put supports under bridges and potential bridges
2014-04-26 17:19:50 +02:00
Alessandro Ranellucci
148c773319
Exclude support from bridged areas
2014-04-26 16:07:43 +02:00
Alessandro Ranellucci
073b7fca1f
One more fix after recent fix to default extrusion width
2014-04-25 20:19:02 +02:00
Alessandro Ranellucci
9ee3868f92
Removed debugging line left
2014-04-25 20:05:08 +02:00
Alessandro Ranellucci
6780e930cb
Update the [timestamp] placeholder(s) at every G-code export. #1957
2014-04-25 19:47:13 +02:00
Alessandro Ranellucci
7ac0095018
Fix regression causing default extrusion width to be ignored. #1958
2014-04-25 19:39:27 +02:00
Alessandro Ranellucci
f6897a346a
Fix islands not being ordered efficiently with the logic that completes each of them before moving to the next one (which is now the default behavior). #1137
2014-04-25 19:11:17 +02:00
Alessandro Ranellucci
2a2ba15665
Use a slider for the cutting GUI
2014-04-25 18:36:08 +02:00
Alessandro Ranellucci
8db4913b04
New option for rotating the lower part resulting from the cut so that the flat surface lies on the print bed
2014-04-25 17:50:03 +02:00
Alessandro Ranellucci
4f17c2b7d1
First working implementation of a GUI for cutting
2014-04-25 17:14:39 +02:00
Alessandro Ranellucci
882a98ed44
Initial work for a GUI for the cut feature
2014-04-25 14:54:08 +02:00
Alessandro Ranellucci
fe1691c151
New --cut feature
2014-04-25 10:20:30 +02:00
Alessandro Ranellucci
6201aacf88
New coverage detection for bridges. Includes implementation of ExPolygon::get_trapezoids()
2014-04-24 13:44:39 +02:00
Petr Ledvina
802ebfb0d6
Fix bridge detector
...
Test line direction is changed to reflect 0=east angle system
Test patern rotation direction is reversed - $angle represents infill direction
Angle test is changed to avoid returning negative value (this does happen otherwise - adding increments to $angle
creates ~ 1e-15 rounding error)
2014-04-23 11:35:58 +02:00
Alessandro Ranellucci
3a49dccf69
Bugfix: version check caused crash
2014-04-22 11:59:01 +02:00
Alessandro Ranellucci
9989ebaabd
Refactored the BridgeDetector class to expose a cleaner API and make it stateful
2014-04-22 00:59:14 +02:00
Alessandro Ranellucci
bc101bd93e
Assume bridge angle is stored in radians in infill generation. #1917
2014-04-21 23:21:15 +02:00
Alessandro Ranellucci
f7e8a99078
More tests and related fixes to bridge detection. #1917
2014-04-21 20:44:21 +02:00
Alessandro Ranellucci
7041ebdd22
Workaround for upstream module bug causing command line option parsing for multi-boolean options like retract-layer-change and wipe
2014-04-19 19:14:41 +02:00
Alessandro Ranellucci
5d10ef514f
Workaround wxWidgets not allowing SetValue() inside a EVT_COMBOBOX handler on Windows. #1865
2014-04-19 18:42:52 +02:00
Alessandro Ranellucci
a49e786b04
Handle EVT_TEXT on wxSpinCtrl too
2014-04-19 18:29:40 +02:00
Alessandro Ranellucci
6e6fb427fb
Fixes for the last commit about kill focus. #1873
2014-04-19 18:16:34 +02:00
Alessandro Ranellucci
10a5a061d4
Bugfix: wxWidgets on Windows needs Skip() on kill focus to prevent nasty focus bugs. #1873
2014-04-19 18:05:01 +02:00
Alessandro Ranellucci
a248c98192
Fixed regression when concentric infill was used as solid infill. Includes regression test. #1650
2014-04-19 16:53:37 +02:00
Alessandro Ranellucci
c3bb8a69db
Bugfix: crash when extending an array option by 2+ positions. #1908
2014-04-19 16:38:28 +02:00
Alessandro Ranellucci
f6e99f1467
Bugfix: [filament_preset] was not replaced in filename when using Quick Slice. #1870
2014-04-19 12:10:15 +02:00
Alessandro Ranellucci
1e5dcd8154
Always do one island at time instead of doing that only when avoid_crossing_perimeters is enabled. #1907
2014-04-19 11:57:01 +02:00
Alessandro Ranellucci
f51921a11a
Default extruder wasn't applied to perimeter extruder. Includes regression test. #1868
2014-04-19 11:43:41 +02:00
Alessandro Ranellucci
0c50ab5323
Removed duplicated method added to Slic3r::Line in caf20664cd. #1945
2014-04-19 10:52:12 +02:00
Alessandro Ranellucci
caf20664cd
Bugfix: ExPolygon::contains_line() was called with a Polyline object but didn't throw any error. Thanks ledvinap #1945
2014-04-19 01:26:21 +02:00
Alessandro Ranellucci
62e19469bc
Fixed regression in --infill-only-where-needed. Includes a minimal test suite for such feature. #1871
...
Conflicts:
t/fill.t
2014-04-18 21:48:32 +02:00
Alessandro Ranellucci
15628a90ed
Regression test for numerical issues causing thin gaps between perimeters and infill. #1803
2014-04-18 17:30:35 +02:00
Alessandro Ranellucci
93f4fe05e1
Better logic for gap fill: don't subtract from fill surfaces those gaps that medial axis was unable to fill. Thanks ledvinap for the idea and proof of concept implementation. Includes a tolerance factor for avoiding being too strict when collapsing loops (allow some overlap if that helps avoiding triggering medial axis). #1803
2014-04-15 01:41:40 +02:00
Alessandro Ranellucci
e02d33bbce
Remove weak test. #1803
2014-04-15 00:57:43 +02:00
Alessandro Ranellucci
43ffb7d3e8
Bugfix: sometimes a tiny gap was left between infill and perimeters. Includes regression test. #1803
2014-04-15 00:22:31 +02:00
Alessandro Ranellucci
f9661b02a6
Bugfix in utils/pdf-slices.pl, wrong shift caused slices to be outside the media box
2014-04-11 19:55:15 +02:00
Alessandro Ranellucci
8e5ca0ab76
Fixed a couple typos
2014-04-09 00:36:13 +02:00
Alessandro Ranellucci
627f23d5fe
Make angle increment (i.e. angle resolution) configurable
2014-04-08 16:53:32 +02:00
Alessandro Ranellucci
38f6e3b643
More unit tests for bridge angle detection
2014-04-08 15:18:37 +02:00
Alessandro Ranellucci
9be57f750d
Some fixes to bridge direction detection. Includes regression tests
2014-04-08 14:51:55 +02:00
Alessandro Ranellucci
23e6abff49
Added first unit test for bridge direction
2014-04-08 13:08:42 +02:00
Alessandro Ranellucci
119778caa9
Refactoring: move bridge angle detection to a separate class for easier unit testing
2014-04-07 23:18:11 +02:00
Alessandro Ranellucci
93a7d87fc6
Bugfix: pillars support material crashed when no overhangs were detected
2014-04-07 16:59:22 +02:00
Alessandro Ranellucci
1c020eda78
Merge pull request #1911 from sapir/speed
...
Rewriting the extrusion path gcode generation in C++
2014-04-07 09:38:21 +02:00
Alessandro Ranellucci
33ade1328f
Fix regression causing profile names to be listed in random order. #1864
2014-04-06 22:45:40 +02:00
Alessandro Ranellucci
e4709068b9
Some more unit tests for arc fitting
2014-04-06 22:32:53 +02:00
Alessandro Ranellucci
1d35701f99
Incomplete work on arc fitting. Results are still incomplete. More unit tests are needed
2014-04-06 22:10:34 +02:00
Alessandro Ranellucci
c7a96a3113
Merge pull request #1881 from sapir/master
...
Disable some calls to on_presets_changed to speed up switching profiles
2014-04-06 12:52:05 +02:00
