Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
1ab8efba7f
Fixed regression causing random failures in bridge direction detection. #2636
2015-02-27 21:55:02 +01:00
Alessandro Ranellucci
e88cf466fe
A couple notes about infill_only_where_needed
2015-02-23 00:55:00 +01:00
Alessandro Ranellucci
2655f3f816
Better and more robust implementation of infill_only_where_needed
2015-02-23 00:44:51 +01:00
Alessandro Ranellucci
2eca094170
Added failing test case for Clipper regression causing extra points in polyline intersection, thus crash with circular bed shape
2015-02-22 17:03:23 +01:00
Alessandro Ranellucci
edbc11477c
Update to Clipper 6.2.9. Fixes #2639
2015-02-22 15:13:52 +01:00
Alessandro Ranellucci
6413d5dcba
Merge pull request #2630 from lordofhyphens/fix-admesh-warning
...
Fix a warning about unused return value when using freopen in admesh.
2015-02-22 14:48:17 +01:00
Alessandro Ranellucci
ba6ae12635
Change end_program() to postamble()
2015-02-15 17:09:17 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
8851dc7f23
Added failing test case for upstream Clipper issue 126 (our #2639 )
2015-02-15 16:47:55 +01:00
Alessandro Ranellucci
32b8eb489c
Updated Clipper to 6.2.8. This fixes several minor issues, including infill paths not being trimmed correctly. #2448
2015-02-15 16:10:04 +01:00
Kent Fredric
df5c2a6f11
Remove redundant dep on ExtUtils::Typemap
...
Typemap (Singluar) version 1.00 is essentially identical to Typemaps (Plural)
Typemap is literally a dumb subclass of TypeMaps, and so this
dependency simply gives an extra installation requirement that does
nothing.
2015-02-14 06:44:22 +13:00
Alexander Rössler
cef1494852
Switched to P parameter instead of S for Machinekit flavour MCode commands
2015-02-10 14:22:23 +01:00
Alessandro Ranellucci
a68fed3938
Bump version number
2015-02-09 10:53:55 +01:00
Alexander Rössler
f2fa8cb63f
added end_program() function to GCodeWriter
2015-02-07 12:36:29 +01:00
Alexander Rössler
32eff40422
added retract and unretract command for Machinekit flavour
2015-02-06 19:16:57 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Joseph Lenox
102785d154
Fix a warning about unused return value when using freopen in admesh. Added another NULL check for safety.
2015-02-05 00:58:27 -06:00
Alessandro Ranellucci
73eb11b395
Releasing 1.2.6
2015-02-01 15:47:29 +01:00
Alessandro Ranellucci
bb3bf28e59
Ported prepare_fill_surfaces() to XS/C++
2015-02-01 12:43:58 +01:00
Alessandro Ranellucci
07cd25d0ec
New option for customization of infill/perimeters overlap. #2459
2015-02-01 12:08:25 +01:00
Alessandro Ranellucci
84eb37e218
Typo in previous commit
2015-01-31 11:57:18 +01:00
Alessandro Ranellucci
62e418d0fc
Modernize some defaults
2015-01-31 11:38:17 +01:00
Alessandro Ranellucci
059b00a829
New --before-layer-change option and new layer_z placeholder. #2602
2015-01-30 20:08:00 +01:00
Alessandro Ranellucci
8605969dc5
Don't output slic3r:z attribute in SVG for raft layers
2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
e2b1b52679
Added a new Slic3r::Geometry::simplify_polygons() function
2015-01-30 18:33:20 +01:00
Alessandro Ranellucci
9ad5d9bb3d
Fixed minor issue in 3D preview causing single-line toolpaths to miss the cap on one endpoint
2015-01-28 23:35:48 +01:00
Alessandro Ranellucci
7652abdf8d
Merge pull request #2595 from xdissent/deserialize-points
...
Use std::getline to deserialize point list coords, fixes #2318
2015-01-28 21:02:05 +01:00
Greg Thornton
b0b9c17c23
Use std::getline to deserialize point list coords, fixes #2318
2015-01-28 09:08:50 -06:00
Alessandro Ranellucci
b1f1893481
Bugfix: tangent horizontal mesh surfaces were not included in slices under rare circumstances, generating almost invalid polygons that confused Clipper and caused skipped layers. Includes regression test
2015-01-28 13:00:38 +01:00
Alessandro Ranellucci
8a5a0b6726
Minor optimization in TriangleMesh code
2015-01-25 17:30:55 +01:00
Alessandro Ranellucci
c264969962
Bugfix: crash when rendering lines with zero length in 3D preview. #2569
2015-01-25 15:21:45 +01:00
Alessandro Ranellucci
a5c0ffe963
Faster loading of 3D preview and much less memory used
2015-01-24 23:35:29 +01:00
Alessandro Ranellucci
8791f5a493
Cleanup of some method signatures and of XS return types
2015-01-19 18:53:04 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
9f0283f808
Minor issue when dealing with files with empty layers at bottom. #2553
2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
4696b46475
Clarified tooltip for First Layer Extrusion Width. #2543
2015-01-18 11:42:19 +01:00
Alessandro Ranellucci
b646b5c98a
Revert "Updated Clipper to 6.2.7"
...
This reverts commit e6c022a61c
2015-01-18 01:31:10 +01:00
Alessandro Ranellucci
e9d08ce51f
Updated MANIFEST
2015-01-18 01:14:14 +01:00
Alessandro Ranellucci
e6c022a61c
Updated Clipper to 6.2.7
2015-01-18 01:07:23 +01:00
Alessandro Ranellucci
357f10732a
Added test case for a Clipper bug
2015-01-18 01:07:23 +01:00
Alessandro Ranellucci
2bbb6c570b
Ported toolpaths rendering to C++
2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
cf4119e169
Populate ExtrusionPath::height correctly in case of bridge
2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
e749f6040f
New +Line::intersection_infinite() method
2015-01-16 16:25:39 +01:00
Alessandro Ranellucci
a616d64971
Bump version number
2015-01-15 22:35:14 +01:00
Alessandro Ranellucci
e0a3d2577c
Initial work for 3D rendering of toolpaths
2015-01-15 20:06:30 +01:00
Alessandro Ranellucci
18e815d032
More efficient 3D preview of slices
2015-01-15 18:49:07 +01:00
Alessandro Ranellucci
bf02062a67
Bugfix: random but frequent crashes after recent perimeter code refactoring
2015-01-14 22:55:11 +01:00
Alessandro Ranellucci
9a7e5327ab
Support --solid-fill-pattern for legacy. #2527
2015-01-13 23:22:27 +01:00
Alessandro Ranellucci
04aa240265
Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way)
2015-01-13 20:55:20 +01:00
