Lukas Matena
cb9937cde4
Corrected wipe tower comments in GCode
2018-04-06 12:02:52 +02:00
Lukas Matena
706dd7020f
New extruder temperature is only set when it differs from the old one
2018-04-04 14:59:31 +02:00
Lukas Matena
42baeee0ed
Fixed a bug regarding the sparse infill
2018-04-04 09:44:05 +02:00
Lukas Matena
e5f23bc11d
Fixed bug - negative feedrate was issued during loading of a new filament
2018-04-03 14:35:54 +02:00
Lukas Matena
281732ca38
Variable layer height enabled, nozzle diameters properly passed to the wipe tower generator
2018-03-29 15:32:09 +02:00
Lukas Matena
1b4dc685f4
Connected filament_ramming_parameters to respective dialog, other minor changes
2018-03-28 15:37:10 +02:00
Lukas Matena
9519fae490
Partial refactoring of wipe tower code (got rid of global constants, etc)
2018-03-21 15:57:17 +01:00
Lukas Matena
a782424d5f
Wipe tower generator connected to purging volumes from the configuration layer
2018-03-20 15:07:18 +01:00
Lukas Matena
349a8a88ae
Bug fix: speed for finish_layer was not properly set
2018-03-19 15:35:31 +01:00
Lukas Matena
67009d80fd
Ramming parameters reduced to one and connected to the wipe tower generator again
2018-03-15 14:04:12 +01:00
Lukas Matena
27ab8ff4e1
Configuration layer changes (cooling_time, bridging, adhesion moved from dedicated dialog to filament/print settings)
2018-03-12 15:41:25 +01:00
Lukas Matena
b5fd4ddb8c
Removed an unnecessary wait
2018-03-12 08:35:35 +01:00
Lukas Matena
6e39f61198
Priming extrusions, nozzle-wipes when leaving tower, removed few unnecessary moves
2018-03-09 12:40:39 +01:00
Lukas Matena
8340a71f88
Lots of unnecessary code removed, minor refactoring changes
2018-03-08 16:44:52 +01:00
Lukas Matena
f5cf181372
Sparse infill repositioned always to the same side
2018-03-07 15:34:12 +01:00
Lukas Matena
76aa134f66
Ramming lines that would end unsupported are made longer to reach to the edge
2018-03-07 11:44:47 +01:00
Lukas Matena
e1922cb2c5
Supressed preview on unloadingmoves
2018-03-07 08:55:53 +01:00
Lukas Matena
af281e13db
Last wipe on layer accounts of border and sparse infill (ugly, yet working)
2018-03-06 19:14:12 +01:00
Lukas Matena
6c223c2f84
Fixed cooling time calculation, removed unnecessary diagonal moves, fixed 'stringing' on start and end of narrower wipe tower layers
2018-03-05 16:51:31 +01:00
Lukas Matena
4058f00275
Added print head moves after ramming and removed one unnecessary diagonal move
2018-03-05 13:53:49 +01:00
Lukas Matena
5aca3045b9
(Un)loading speed and delay introduced into wipe tower generator
2018-03-05 10:45:35 +01:00
Lukas Matena
b3e9b82280
(Un)loading speed and time delay parameters introduced into GUI and conf. layer (not yet into wipe tower generator)
2018-03-02 15:52:16 +01:00
Lukas Matena
e1421da5e8
Integrating cooling tube parameters into wipe tower generator
2018-03-02 13:26:16 +01:00
Lukas Matena
b1b16359d9
Changes in includes in order to fix Win builds
2018-03-01 08:43:43 +01:00
Lukas Matena
9ea803b000
Attempts to fix OSX and Win builds
2018-02-28 19:53:32 +01:00
Lukas Matena
a62ad3323f
First naive implementation of wipe tower settings dialog
2018-02-28 16:04:56 +01:00
Lukas Matena
5f5a59328b
Minor refactoring, actualized comments, etc.
2018-02-22 11:03:29 +01:00
Lukas Matena
5a02bde170
Fix of merge conflict and uninitialized variables in writer class
2018-02-22 09:28:31 +01:00
Lukas Matena
de92f45eaf
Merge with master
2018-02-21 13:22:51 +01:00
Lukas Matena
5ca0a2f37d
Parametrized toolchanges, experiments with sparse wipe tower, etc
2018-02-21 13:07:32 +01:00
Enrico Turri
f9dd251276
GCode Preview - Added feature type for wipe tower
2018-02-05 13:16:08 +01:00
Lukas Matena
37bbeeb9d0
Parametrization of ramming and loading sequence - first steps
2018-01-04 12:03:06 +01:00
Lukas Matena
180967484e
Correction of wipe tower brim generation
2017-12-22 11:26:43 +01:00
Lukas Matena
4583d62edd
Merge branch 'master' into wipe_tower_improvements
2017-12-21 13:47:33 +01:00
Lukas Matena
b7a326a550
First attempts of variable wipe implementation, sparse infill modified to sawtooth
2017-12-21 13:28:26 +01:00
bubnikv
cdab27d337
Enabled a long wipe when moving away from the wipe tower
...
to reduce stringing.
2017-12-14 09:50:38 +01:00
Lukas Matena
87c67636df
Extrusion flow calculation based on nozzle diameter etc
2017-12-07 11:59:14 +01:00
Lukas Matena
c34fd10e23
Wipe tower rotation around center point
2017-12-05 11:25:38 +01:00
bubnikv
16bd3fc624
Fixed an extruder ordering bug on the 1st layer wipe tower.
...
This is a regression after introducing the extruder priming areas
at the edge of the print bed.
2017-12-03 09:43:00 +01:00
Lukas Matena
cb84a6cfce
Wipe tower rotation - bug fix (now returning start_pos correctly)
2017-12-01 11:10:01 +01:00
Lukas Matena
2921302fe9
GUI integration of rotation angle setting
2017-11-30 12:08:22 +01:00
Lukas Matena
0e9e487930
First implementation of wipe tower rotation
2017-11-28 17:32:11 +01:00
bubnikv
e719e48a84
Fixed a bug in the temperature handling of the Prusa Multi Material
...
priming towers.
2017-10-03 13:43:34 +02:00
bubnikv
b08d6f1969
The last priming area is shortened and the excess wipe is moved
...
into the wipe tower if there is enough space inside the wipe tower.
2017-09-12 15:55:38 +02:00
bubnikv
2c5304a520
Implemented an initial priming line for a single-material print
...
on a Prusa Multi-Material printer.
2017-09-04 13:51:05 +02:00
bubnikv
b35f5780dc
Fixed compilation on OSX & LInux
2017-09-04 10:14:56 +02:00
bubnikv
b610866d77
Implemented priming of all the filaments of the Prusa Multi Material.
2017-09-01 17:30:18 +02:00
bubnikv
ba1c0b0137
CMake build process - fixes of the previous check-ins to build
...
cleanly on Windows & Linux. There is still a work on OSX:
The XS module has to be linked without perl.lib and with
the following parameters to produce a bundle: -bundle -undefined dynamic_lookup
2017-08-18 21:09:53 +02:00
bubnikv
507f2ff45e
Comprimed the previous pull request.
2017-08-14 12:56:09 +02:00
redPrint7
fdc7036fe3
Update WipeTowerPrusaMM.cpp ( #464 )
...
Resolves compile error on Win XP / Win 7 with native toolchain MinGW32-w64 on perl 5.26 or Citrusperl 5.24.
2017-08-14 12:54:19 +02:00