rtyr
0255ff2fd6
Bumped up version to 0.1.1
2021-12-11 21:01:34 +01:00
Spencer Owen
93f62854b1
Add ender 2 pro
2021-12-04 13:34:29 -07:00
rtyr
e32cde8054
Creality - bumped up version to 0.1.0
2021-06-28 19:05:30 +02:00
Pascal de Bruijn
d737142f37
creality.ini: make print profiles inclusive of Sermoon printers
2021-06-28 18:02:00 +02:00
Pascal de Bruijn
43346a871c
creality.ini: beta support for Sermoon D1
2021-06-27 19:20:25 +02:00
Pascal de Bruijn
3cf1f568d0
creality.ini: beta support for Ender-7
2021-06-27 19:07:17 +02:00
Pascal de Bruijn
95c879cf00
creality.ini: beta support for CR-10 SMART
2021-06-27 18:51:41 +02:00
rtyr
fdd5151a45
Version bumped to 0.0.17
2021-06-01 09:01:45 +02:00
Pascal de Bruijn
3abc0b84a4
creality.ini: straingauge start_gcode wait for bed temp to settle as well
...
given this applies to a larger bed printer as well (CR-6 Max).
2021-05-31 20:00:41 +02:00
Pascal de Bruijn
166790c49e
creality.ini: fix new placeholder syntax
2021-05-30 20:37:02 +02:00
Pascal de Bruijn
ddb556db66
creality.ini: internal start_gcode consistency improvements
2021-05-30 17:55:18 +02:00
Pascal de Bruijn
a934960c00
creality: special start_gcode for straingauge printers
2021-05-30 17:48:54 +02:00
Pascal de Bruijn
3a445c99fb
creality.ini: use 150C during ABL again
...
initially ABL temp was lowered to 120C for straingauge ABL (G29), but since
we're no longer doing ABL on each print for straingauge printers like the CR6
series, we can raise the temp a little again
2021-05-30 17:33:58 +02:00
Pascal de Bruijn
620985b29f
creality.ini: improve output_filename_format
...
this moves the print_time directly after the input_filename_base,
so it has the most chance of surviving truncation by marlin.
temperature is also added in front of the filament_type.
2021-05-04 18:41:06 +02:00
Pascal de Bruijn
6110d1ef05
creality.ini: Add Devil Design PLA Matt
2021-05-03 18:13:02 +02:00
rtyr
b71fa0d634
Bumped up version to 0.0.16
2021-04-20 20:35:49 +02:00
Pascal de Bruijn
2cb268c947
Revert "creality.ini: Extrudr NX2 slightly lower temps"
...
This reverts commit 41c56f2eb8
2021-04-20 18:13:21 +02:00
Pascal de Bruijn
d50c2872bd
creality.ini: disable explicit ABL for CR6-SE ( #6383 )
...
this is also better in line with Creality's intended behavior
2021-04-20 18:12:08 +02:00
Pascal de Bruijn
d33cffdd1e
creality.ini: remove parentheses for galaxy pla filament
...
since we've not using those for other filament subtypes
2021-04-16 19:32:32 +02:00
Pascal de Bruijn
2ffcf97be1
creality.ini: more accurate spool weights for Devil Design
...
I just noticed Devil Design uses identical spools to Extrudr NX-2
2021-04-16 19:30:33 +02:00
Pascal de Bruijn
10e914d9a9
creality.ini: add 3DJAKE ecoPLA Matt
...
the filament is very flowy, which means it prints well at lower temperatures.
and given the limited part cooling fan on most creality printers, it prints
less well at higher temperatures.
2021-04-14 18:00:09 +02:00
Pascal de Bruijn
d8f56ef5fd
creality.ini: add Devil Design approx spool weights
...
by manufacturer specifications:
https://devildesign.com/download/PLA_-_product_card.pdf
2021-04-14 17:59:55 +02:00
Pascal de Bruijn
41c56f2eb8
creality.ini: Extrudr NX2 slightly lower temps
...
After more practical testing, a slightly lower temp is beneficial on
small pointy areas, preventing them from being slightly deformed.
2021-04-13 19:09:54 +02:00
rtyr
6121f1de3b
version bumped up to 0.0.15
2021-04-12 11:42:32 +02:00
Pascal de Bruijn
d09871441a
creality.ini: add Tough PLAs
2021-04-05 17:24:16 +02:00
Pascal de Bruijn
744311f3c3
creality.ini: improve bridging
2021-04-04 15:24:57 +02:00
Pascal de Bruijn
7eaadf0e47
Revert "creality.ini: move Ender-3 specific extruder_clearance"
...
Due to #589 .
This reverts commit 34202f71e5
2021-03-01 23:56:08 +01:00
Pascal de Bruijn
45cbac0b7c
creality.ini: unhide new printers (except CR-X)
2021-03-01 19:00:04 +01:00
Pascal de Bruijn
065a129d47
creality.ini: remove single_extruder_multi_material_priming from printer section
2021-03-01 18:43:40 +01:00
Pascal de Bruijn
7fbb3a2b42
creality.ini: Add CR-5 Pro H
...
this is a high temp variant of the regular CR-5 Pro, with the
suspected all metal hotend, presumably the non-H variant has
a teflon lined hotend
related: 2d762ec320
2021-03-01 18:40:33 +01:00
Pascal de Bruijn
586ed35e3a
creality.ini: fix CR-5 Pro bed_shape
2021-03-01 18:34:18 +01:00
Pascal de Bruijn
f5863cd5d8
creality.ini: CR-200B also has a descending z axis
2021-03-01 18:24:44 +01:00
Pascal de Bruijn
5e78b0f24f
creality.ini: remove ignored renamed_from from *descendingz*
...
fixes: Nonpublic intermediate preset *descendingz* contains a "renamed_from" field, which is ignored
2021-03-01 18:21:27 +01:00
Pascal de Bruijn
34202f71e5
creality.ini: move Ender-3 specific extruder_clearance
...
replace general extruder_clearance with higher values so there's
a lot of clearance leeway until we get exact figures for each
printer model.
related: f9b4bbb016
2021-02-28 17:10:25 +01:00
Pascal de Bruijn
90f58fe90a
creality.ini: CR-200B bed_shape and max_print_height
2021-02-28 17:06:24 +01:00
Pascal de Bruijn
e5b7b20be1
creality.ini: CR-5 Pro more accurate bed
2021-02-28 16:57:35 +01:00
Pascal de Bruijn
19ba6f1492
creality.ini: add CR-200B
2021-02-28 16:53:33 +01:00
Pascal de Bruijn
2d762ec320
creality.ini: add CR-5 Pro
...
retract_length = 3
to prevent clogging since this printer is suspected to have
an all metal hot end, as Creality claims print temperatures
up to 300C
2021-02-28 16:38:05 +01:00
Pascal de Bruijn
249670f82c
creality.ini: fix CR-10 Mini bed_shape
2021-02-28 16:36:58 +01:00
Pascal de Bruijn
bc9c968f05
creality.ini disable single_extruder_multi_material_priming
2021-02-27 18:16:47 +01:00
Pascal de Bruijn
c142af74c5
creality.ini: add printer_notes to Ender3V2
2021-02-27 17:53:20 +01:00
Pascal de Bruijn
19c50c7e69
creality.ini: consolidate more properties to *common*
2021-02-27 17:51:57 +01:00
Pascal de Bruijn
6391d4243f
creality.ini: tweak fill_density and skirt_distance
2021-02-27 17:40:44 +01:00
Pascal de Bruijn
9b7621dc7e
creality.ini: double digit layer height (cosmetic)
2021-02-23 20:06:55 +01:00
Pascal de Bruijn
f9b4bbb016
creality.ini: more accurate extruder_clearance for Ender-3
...
radius = 47mm = 45mm carriage (including bltouch upgrade)
+ 2mm safety margin
height = 34mm = 30mm nozzle
+ 2mm bltouch probe pin
+ 2mm safety margin
2021-02-23 19:53:30 +01:00
Pascal de Bruijn
b06030f2bc
creality.ini: allow slightly steeper unsupported angles
2021-02-23 19:23:35 +01:00
rtyr
39ba24abd7
Updated version
2021-02-22 09:23:58 +01:00
Pascal de Bruijn
5f1129acea
creality.ini: descendingz gcode comment improvement
2021-02-19 18:54:47 +01:00
Pascal de Bruijn
5842842770
creality.ini: descendingz is more descriptive
2021-02-19 18:05:47 +01:00
Pascal de Bruijn
5c287cd998
creality.ini: relocate max_print_height close to bed_shape
2021-02-18 19:37:55 +01:00
